- CGAL itself includes its library dependencies, we only need to
provide the -L... option to the proper ThirdParty locations.
Should help improve general build robustness.
- instead we use the CGAL settings directly since they have the
same option of (version | system | none)
- may wish to review this again in the future.
blockMesh -help
Usage: blockMesh [OPTIONS]
options:
-blockTopology write block edges and centres as .obj files
-case <dir> specify alternate case directory, default is the cwd
-dict <file> specify alternative dictionary for the blockMesh description
-noFunctionObjects
do not execute functionObjects
-region <name> specify alternative mesh region
-srcDoc display source code in browser
-doc display application documentation in browser
-help print the usage
Block description
For a given block, the correspondence between the ordering of
vertex labels and face labels is shown below.
For vertex numbering in the sequence 0 to 7 (block, centre):
faces 0 (f0) and 1 are left and right, respectively;
faces 2 and 3 are bottom and top;
and faces 4 and 5 are front the back:
4 ---- 5
f3 |\ |\ f5
| | 7 ---- 6 \
| 0 |--- 1 | \
| \| \| f4
f2 3 ---- 2
f0 ----- f1
Using: OpenFOAM-dev (see www.OpenFOAM.org)
Build: dev-dc59c63351e7
to ensure 'patchType' is set as specified.
Required substantial change to the organization of the reading of the
'value' entry requiring careful testing and there may be some residual
issues remaining. Please report any problems with the reading and
initialization of patch fields.
Resolves bug-report http://bugs.openfoam.org/view.php?id=2266
- Less looping when detecting lagrangian clouds and their fields.
- Avoid using Time::setTime() and IOobjectList in tight loops.
They both kill performance immensely.
ENH: provide a -noLagrangian option to foamToEnsight and foamToEnsightParts
for even more control.
- The new field needs initialization with a dimensioned<Type> not just
the dimensionSet.
- The new field was also incorrectly being registered, which could
cause issues later.
Old code:
Found 10990 time steps
Search for moving mesh ... no moving mesh detected.
Startup in 329.09 s
Updated:
Found 10990 time steps
Search for moving mesh ... no moving mesh detected.
Startup in 1.6 s
- Cause was checking "polyMesh/points" via an IOobject.
Short-circuit with a check for a polyMesh/ directory first.
Limit the check to the master-node as well to further reduce
load on the file-system.
------------------------------
ENH: improve per-step conversion times for foamToEnsight.
Old code:
Converting 11001 time steps
Time [0] = 0 Wrote in 1.53 s
Time [1] = 1 Wrote in 1.52 s
...
Time [100] = 100 Elapsed time 205.35 s
Updated:
Converting 11001 time steps
Time [0] = 0 Wrote in 1.4 s
Time [1] = 1 Wrote in 0.07 s
...
Time [100] = 100 Elapsed time 42.4 s
- Speedup by hashing test results from the first conversion step
instead of checking each time.
Check data on all nodes to avoid problems with incomplete writes.
------------------------------
BUG: moving mesh detection failed for foamToEnsightParts
- adjusted to agree with updated foamToEnsight
------------------------------
Note:
- foamToEnsightParts (serial) still has about twice the throughput of
foamToEnsight.
Renamed the original 'laminar' model to 'Stokes' to indicate it is a
linear stress model supporting both Newtonian and non-Newtonian
viscosity.
This general framework will support linear, non-linear, visco-elastic
etc. laminar transport models.
For backward compatibility the 'Stokes' laminar stress model can be
selected either the original 'laminar' 'simulationType'
specification in turbulenceProperties:
simulationType laminar;
or using the new more general 'laminarModel' specification:
simulationType laminar;
laminar
{
laminarModel Stokes;
}
which allows other laminar stress models to be selected.
Required to support LTS with the -postProcess option with sub-models dependent on ddt
terms during construction, in particular reactingTwoPhaseEulerFoam.
- Default is a width of 8 characters, but this can be extended up to 31
characters via the '-width' command-line option.
- Now use a similar structure as foamToEnsightParts for the masking.
This reduces the clutter within the directory, makes it easier to
selectively delete some time steps (using shell commands).
- Added in a "time" information data in each sub-directory to
make it possible to reconstruct the case file with an external
script.
- Conversion of cloud data should now also work in parallel
(may need more testing).
- Support binary output for cloud data.
- Better avoidance of illegal ensight variable names.
But still partially incomplete (due to patch fields).
==================================================
Example of NEW file structure:
EnSight/verticalChannel.case # case name
EnSight/geometry # for non-moving geometry
EnSight/data/ # time-varying data
EnSight/data/00000000/
EnSight/data/00000001/
...
Fields are stored by name within the data/********/ directories:
EnSight/data/00000001/time # human-readable time info
EnSight/data/00000001/U
EnSight/data/00000001/p
...
EnSight/data/00000001/geometry # for moving geometry
Clouds are stored at the next sub-directory level:
EnSight/data/00000001/lagrangian/<cloudName>/positions
EnSight/data/00000001/lagrangian/<cloudName>/U
...
==================================================
The old structure was significantly more cluttered:
EnSight/verticalChannel.case
EnSight/verticalChannel.0000.mesh
EnSight/verticalChannel.0001.p
EnSight/verticalChannel.0001.<cloudName>
EnSight/verticalChannel.0001.<cloudName>.U
==================================================
- There will be triangles rendered inside the mesh (when
surface-rendering), because one of the cell's triangles is defined
as a quadrangle in VTK_WEDGE.
- Therefore, this VTK_WEDGE representation is only used when
decomposing the mesh, otherwise the correct representation is done
by VTK_POLYHEDRON.
- Furthermore, using VTK_PYRAMID gave worse result, because it renders
2 triangles inside the mesh for the collapsed quadrangle, likely due
to mismatch with the adjacent cell's face.
- Using VTK_HEXAHEDRON was not tested in this iteration, given that it
should give even worse results, when compared to using VTK_PYRAMID.
Patch contributed by Bruno Santos
Resolves bug-report http://bugs.openfoam.org/view.php?id=2099
Now the functionality to write single graph files or log files (vs time)
may be used in the creation of any form of functionObject, not just
those relating to a mesh region.
