- refine definition of patch boundary faces to distinguish between
boundaryFaces() and uniqBoundaryFaces().
* boundaryFaces() for edge to face lookup on boundary edges.
* uniqBoundaryFaces() for accessing quantities such as face areas
or eroding an outer layer
ENH: LabelledItem container, replaces unused 'Keyed' container
- method names in alignment with objectHit, pointIndexHit etc.
Top-level name aligns with labelledTri.
- can now drop older Test-decomposePar for exploration purposes
and simply use -dry-run with the -domains and -method options.
- write VTK file instead of volScalarField in combination
with -dry-run and -cellDist.
Avoids adding any OpenFOAM fields and is usually faster to load.
Also easier to rename than a volScalarField would be when exploring
multiple decompositions.
- minor simplification of #if/#endif handling
ENH: improve input robustness with negative-prefixed expansions (#2095)
- especially in blockMeshDict it is useful to negate an value directly.
Eg,
```
xmax 100;
xmin -$xmax;
```
However, this fails since the dictionary expansion is a two-step
process of tokenization followed by expansion. After the expansion
the given input would now be the following:
```
xmax 100;
xmin - 100;
```
and retrieving a scalar value for 'xmin' fails.
Counteract this by being more generous on tokenized input when
attempting to retrieve a label or scalar value.
If a '-' is found where a number is expected, use it to negate the
subsequent value.
The previous solution was to invoke an 'eval':
```
xmax 100;
xmin #eval{-$xmax};
```
which adds additional clutter.
- intended for the following type of use:
auto oldHandler = fileHandler(fileOperation::NewUncollated());
... do something that only works with uncollated
// Restore previous (if any)
if (oldHandler)
{
fileHandler(std::move(oldHandler));
}
ENH: make fileOperation distributed(bool) mutable
- use is "static-like" and akin to Pstream::parRun(bool),
thus allow toggling of the switch without a const_cast
- return internalEdges() and boundaryEdges() sub lists directly
- calculate and return boundaryFaces() to identify faces attached to
boundary edges.
- minor code cleanup, and add PrimitivePatchBase class for
non-templated code.
STYLE: mark unused parameter in globalMeshData mergePoints
- this constructor was added for similarity with std::vector,
but continues to cause various annoyances.
The main problem is that the templated parameter tends to grab
anything that is not a perfect match for other constructors.
Typically seen with two integers (in 64-bit mode), but various other
cases as well.
If required, the ListOps::create() function provides a lengthier
alternative but one that can also incorporate transformations.
Eg,
pointField pts = ....;
List<scalar> mags
(
List<scalar>::create
(
pts.begin(),
pts.end(),
[](const vector& v){ return magSqr(v); }
);
- additional rcEdge(), rcEdges() methods for reverse order walk
- accept generic edge() method as alternative to faceEdge() for
single edge retrieval.
- edge() method with points -> returns the vector
- reduce the number of operations in edgeDirection methods
DEFEATURE: remove longestEdge global function
- deprecated and replaced by face::longestEdge() method (2017-04)
- reduces code, simplifies creation of new, specialized polyData
writers.
- new templated vtk::GenericPatchWriter, which adds support for
writing both uindirectPrimitivePatch + indirectPrimitivePatch types.
- handle geometric fields separately from regular fields with
* vtk:GenericPatchGeoFieldsWriter
* vtk:indirectPatchGeoFieldsWriter
* vtk:uindirectPatchGeoFieldsWriter
Step 1.
include "addAllRegionOptions.H"
Adds the -allRegions, -regions and -region options to argList.
Step 2.
include "getAllRegionOptions.H"
Processes the options with -allRegions selecting everything
from the regionProperties.
OR use -regions to specify multiple regions (from
regionProperties), and can also contain regular expressions
OR use the -region option
Specifying a single -regions NAME (not a regular expresssion)
is the same as -region NAME and doesn't use regionProperties
Creates a `wordList regionNames`
Step 3.
Do something with the region names.
Either directly, or quite commonly with the following
include "createNamedMeshes.H"
Creates a `PtrList<fvMesh> meshes`
STYLE: add description to some central include files
- make regionName an optional constructor parameter, which eliminates
a separate set of constructors and construction tables. Adjust
internals to treat a missing/empty regionName as a no-op.
- pass in fallback dictionary content via new IOdictionary constructor
with a pointer
ENH: further relax check for matching number of processor dirs
- if the "numberOfSubdomains" entry is missing (or even zero)
ignore checks of processor dirs as meaningless.
- additional debug information
- improve support for dictionary specification of constant, polynomial
and table entries. These previously only worked properly for
primitiveEntry, which causes confusion.
- extend table Function1 to include TableFile functionality.
Simplifies switching and modifying content.
- additional default construct
- add explicit zero-size constructor for ITstream.
For tagged dispatching, without ambiguity
- elminate mandatory name for parsing versions.
This makes it easier to use ITstream, IStringStream, UListStream
interchangeable.
- some code used copy construct from dictionary::null instead.
The result is the same but suggests that something else may be intended.
Only need dictionary::null for const-ref usage.
- allows use of surface names starting with a digit
(by quoting the name).
User is responsible for not generating bad names for output files.
Eg "bad.**.name", since these will be difficult to handle from the
shell
- The keyType is primarily used within dictionary reading, whereas
wordRe and wordRes are used for selectors in code.
Unifying on wordRe and wordRes reduces the number matching options.
- additional dummy template parameter to assist with supporting
derived classes. Currently just used for string types, but can be
extended.
- provide hash specialization for various integer types.
Removes the need for any forwarding.
- change default hasher for HashSet/HashTable from 'string::hash'
to `Hash<Key>`. This avoids questionable hashing calls and/or
avoids compiler resolution problems.
For example,
HashSet<label>::hasher and labelHashSet::hasher now both properly
map to Hash<label> whereas previously HashSet<label> would have
persistently mapped to string::hash, which was incorrect.
- standardize internal hashing functors.
Functor name is 'hasher', as per STL set/map and the OpenFOAM
HashSet/HashTable definitions.
Older code had a local templated name, which added unnecessary
clutter and the template parameter was always defaulted.
For example,
Old: `FixedList<label, 3>::Hash<>()`
New: `FixedList<label, 3>::hasher()`
Unchanged: `labelHashSet::hasher()`
Existing `Hash<>` functor namings are still supported,
but deprecated.
- define hasher and Hash specialization for bitSet and PackedList
- add symmetric hasher for 'face'.
Starts with lowest vertex value and walks in the direction
of the next lowest value. This ensures that the hash code is
independent of face orientation and face rotation.
NB:
- some of keys for multiphase handling (eg, phasePairKey)
still use yet another function naming: `hash` and `symmHash`.
This will be targeted for alignment in the future.
- wrap command-line retrieval of fileName with an implicit validate.
Instead of this:
fileName input(args[1]);
fileName other(args["someopt"]);
Now use this:
auto input = args.get<fileName>(1);
auto other = args.get<fileName>("someopt");
which adds a fileName::validate on the inputs
Because of how it is implemented, it will automatically also apply
to argList getOrDefault<fileName>, readIfPresent<fileName> etc.
- adjust fileName::validate and clean to handle backslash conversion.
This makes it easier to ensure that path names arising from MS-Windows
are consistently handled internally.
- dictionarySearch: now check for initial '/' directly instead of
relying on fileName isAbsolute(), which now does more things
BREAKING: remove fileName::clean() const method
- relying on const/non-const to control the behaviour (inplace change
or return a copy) is too fragile and the const version was
almost never used.
Replace:
fileName sanitized = constPath.clean();
With:
fileName sanitized(constPath);
sanitized.clean());
STYLE: test empty() instead of comparing with fileName::null
- simplify compile/uncompile, reading, assignment
- implicit construct wordRe from keyType (was explicit) to simplify
future API changes.
- make Foam::isspace consistent with std::isspace (C-locale)
by including vertical tab and form feed
ENH: improve #ifeq float/label comparisons
- originally had tests for regex meta characters strewn across
regExp classes as well as wordRe, keyType, string.
And had special-purpose quotemeta static function within string
that relied on special naming convention for testing the meta
characters.
The regex meta character testing/handling now relegated entirely
to the regExp class(es).
Relocate quotemeta to stringOps, with a predicate.
- avoid code duplication. Reuse some regExpCxx methods in regExpPosix
It was only looking for faces that were used in both
endpoints but not actually checking whether they were indeed
an edge (== consecutive vertex) in all faces. So if one
face had an additional crossing edge and another didn't it
would find more edgeFaces than the proper
'primitiveMesh::edgeFaces()' routine.
This occasionally happened inside snappyHexMesh
(e.g. motorBike tutorial)
For example,
```
entry #eval 10 { vector(rand(), 0, 0) };
```
ENH: be more generous and ignore trailing ';' in expressions
STYLE: adjust parse token name for tensor::I
- overCompressibleInterDyMFoam: Overset solver for two compressible,
non-isothermal, immiscible fluids using a VOF (i.e. volume of fluid)
phase-fraction based interface capturing approach.
- overInterPhaseChangeDyMFoam: Overset solver for two incompressible,
isothermal, immiscible fluids with phase-change (e.g. cavitation) using
VoF (i.e. volume of fluid) phase-fraction based interface capturing approach.
- adds new tutorials:
- multiphase/overCompressibleInterDyMFoam/compressibleTwoSimpleRotors
- multiphase/overInterPhaseChangeDyMFoam/twoSimpleRotors
Signed-off-by: Kutalmis Bercin <kutalmis.bercin@esi-group.com>
- new '-ascii' option to write in ASCII format instead of the
controlDict setting. This can be useful when generating fields that
should be parsed with other tools, or for visual inspection.
- correct mismatch of option names and lookups
- can use either command-line option "-load-fields" or dictionary
entry "readFields" to specify field names to be preloaded.
Essentially the same functionality as with a readFields function
object but with a lot less typing.
- tutorial examples provided by Ryan Danks <ryan.danks@rwdi.com>
illustrate using setExpr* utilities to calculate a quantity
as a post-processing step.
- simplifies local toggling.
- centralize fileModification static variables into IOobject.
They were previously scattered between IOobject and regIOobject
