- end_value() corresponds to the infrequently used after() method, but
with naming that corresponds better to iterator naming conventions.
Eg,
List<Type> list = ...;
labelRange range = ...;
std::transform
(
(list.data() + range.begin_value()),
(list.data() + range.end_value()),
outIter,
op
);
- promote min()/max() methods from labelRange to IntRange base class
STYLE: change timeSelector from "is-a" to "has-a" scalarRanges.
- resets min/max to be identical to the specified value,
which can be more convenient (and slightly more efficient) than doing
a full reset followed by add()
- additional MinMax intersects() query, which works like overlaps()
but with exclusive checks at the ends
- provide MinMax::operator&=() to replace (unused) intersect() method
ENH: single/double value reset method for boundBox
- boundBox::operator&=() to replace (rarely used) intersect() method.
Deprecate boundBox::intersect() to avoid confusion with various
intersects() method
COMP: provide triangleFwd.H
- background: for some application it can be useful to have fully
sorted points. i.e., sorted by x, followed by y, followed by z.
The default VectorSpace 'operator<' compares *all*
components. This is seen by the following comparisons
1. a = (-2.2 -3.3 -4.4)
b = (-1.1 -2.2 3.3)
(a < b) : True
Each 'a' component is less than each 'b' component
2. a = (-2.2 -3.3 -4.4)
b = (-2.2 3.3 4.4)
(a < b) : False
The a.x() is not less than b.x()
The static definitions 'less_xyz', 'less_yzx', 'less_zxy'
instead use comparison of the next components as tie breakers
(like a lexicographic sort).
- same type of definition that Pair and Tuple2 use.
a = (-2.2 -3.3 -4.4)
b = (-2.2 3.3 4.4)
vector::less_xyz(a, b) : True
The a.x() == b.x(), but a.y() < b.y()
They can be used directly as comparators:
pointField points = ...;
std::sort(points.begin(), points.end(), vector::less_zxy);
ENH: make VectorSpace named access methods noexcept.
Since the addressing range is restricted to enumerated offsets
(eg, X/Y/Z) into storage, always remains in-range.
Possible to make constexpr with future C++ versions.
STYLE: VectorSpace 'operator>' defined using 'operator<'
- standard rewriting rule
STYLE: combine templated/non-templated headers (reduced clutter)
STYLE: use hitPoint(const point&) combined setter
- same as setHit() + setPoint(const point&)
ENH: expose and use labelOctBits::pack method for addressing
- construct boundBox from Pair<point> of min/max limits,
make sortable
- additional bounding box intersections (linePointRef), add noexcept
- templated access for boundBox hex-corners
(used to avoid temporary point field).
Eg, unrolled plane/bound-box intersection with early exit
- bounding box grow() to expand box by absolute amounts
Eg,
bb.grow(ROOTVSMALL); // Or: bb.grow(point::uniform(ROOTVSMALL));
vs
bb.min() -= point::uniform(ROOTVSMALL);
bb.max() += point::uniform(ROOTVSMALL);
- treeBoundBox bounding box extend with two or three parameters.
The three parameter version includes grow(...) for reduced writing.
Eg,
bb = bb.extend(rndGen, 1e-4, ROOTVSMALL);
vs
bb = bb.extend(rndGen, 1e-4);
bb.min() -= point::uniform(ROOTVSMALL);
bb.max() += point::uniform(ROOTVSMALL);
This also permits use as const variables or parameter passing.
Eg,
const treeBoundBox bb
(
treeBoundBox(some_points).extend(rndGen, 1e-4, ROOTVSMALL)
);
- box method on meshShapes (cell,edge,face,triangle,...)
returns a Pair<point>.
Can be used directly without dependency on boundBox,
but the limits can also passed through to boundBox.
- Direct box calculation for cell, which walks the cell-faces and
mesh-faces. Direct calculation for face (#2609)
ENH: extend rmDir to handle removal of empty directories only
- recursively remove directories that only contain other directories
but no other contents. Treats dead links as non-content.
- stem(), replace_name(), replace_ext(), remove_ext() etc
- string::contains() method - similar to C++23 method
Eg,
if (keyword.contains('/')) ...
vs
if (keyword.find('/') != std::string::npos) ...
- construct based on db and mesh information from an existing field
- check movable() instead of isTmp() when reusing fields
STYLE: isolate check for reuse GeometricField into Detail namespace
- in continuation of #2565 (rotationCentre for surface output formats)
it is helpful to also support READ_IF_PRESENT behaviour for the
'origin' keyword.
This can be safely used wherever the coordinate system definition
is embedded within a sub-dictionary scope.
Eg,
dict1
{
coordinateSystem
{
origin (0 0 0); // now optional here
rotation ...;
}
}
but remains mandatory if constructed without a sub-dict:
dict2
{
origin (0 0 0); // still mandatory
e1 (1 0 0);
e3 (0 0 1);
}
With this change, the "transform" sub-dictionary can written
more naturally:
formatOptions
{
vtk
{
scale 1000; // m -> mm
transform
{
rotationCentre (1 0 0);
rotation axisAngle;
axis (0 0 1);
angle -45;
}
}
}
ENH: simplify handling of "coordinateSystem" dictionary lookups
- coordinateSystems::NewIfPresent method for optional entries:
coordSysPtr_ = coordinateSystem::NewIfPresent(mesh, dict);
Instead of
if (dict.found(coordinateSystem::typeName, keyType::LITERAL))
{
coordSysPtr_ =
coordinateSystem::New
(
mesh_,
dict,
coordinateSystem::typeName
);
}
else
{
coordSysPtr_.reset();
}
ENH: more consistent handling of priorities for binModels, forces (#2598)
- if the dictionaries are overspecified, give a 'coordinateSystem'
entry a higher prioriy than the 'CofR' shortcuts.
Was previously slightly inconsistent between the different models.
- with IOstreamOption there are no cases where we need to construct
top-level streams (eg, IFstream, OFstream) with additional information
about the internal IOstream 'version' (eg, version: 2.0).
Makes it more convenient to open files with a specified
format/compression combination - no clutter of specifying the
version
- avoids redundant dictionary searching
STYLE: remove dictionary lookupOrDefaultCompat wrapper
- deprecated and replaced by getOrDefaultCompat (2019-05).
The function is usually specific to internal keyword upgrading
(version compatibility) and unlikely to exist in any user code.
- read construct from dictionary.
Calling syntax similar to dimensionedType, dimensionedSet,...
Replaces the older getEntry(), getOptional() static methods
- support readIfPresent
- noexcept on some Time methods
ENH: pass through is_oriented() method for clearer coding
- use logical and/or/xor instead of bitwise versions (clearer intent)
Header information now includes, e.g.
f [Hz] vs P(f) [Pa]
Lower frequency: 2.500000e+01
Upper frequency: 5.000000e+03
Window model: Hanning
Window number: 2
Window samples: 512
Window overlap %: 5.000000e+01
dBRef : 2.000000e-05
Area average: false
Area sum : 6.475194e-04
Number of faces: 473
Note: output files now have .dat extension
- for example,
defaultFieldValues
(
areaScalarFieldValue h 0.00014
);
regions
(
clipPlaneToFace
{
point (0 0 0);
normal (1 0 0);
fieldValues
(
areaScalarFieldValue h 0.00015
);
}
);
ENH: additional clipPlaneTo{Cell,Face,Point} topo sets
- less cumbersome than defining a semi-infinite bounding box
- remedy by performing the attach() action sequentially (as per
stitchMesh changes). This ensures that the current point addressing
is always used and avoids references to the already-merged points
(which is what causes the failure).
ENH: improve handling of empty patch removal
- only remove empty *merged* patches, but leave any other empty
patches untouched since they may intentional placeholders for other
parts of a workflow.
- remove any empty point/face zones created for patch merging
- whichPolyPatches() = the polyPatches related to the areaMesh.
This helps when pre-calculating (and caching) any patch-specific
content.
- whichPatchFaces() = the poly-patch/patch-face for each of the faceLabels.
This allows more convenient lookups and, since the list is cached on
the area mesh, reduces the number of calls to whichPatch() etc.
- whichFace() = the area-face corresponding to the given mesh-face
ENH: more flexible/consistent volume->area mapper functions
- include -no-libs option by default, similar to '-lib',
which makes it available to all solvers/utilities.
Add argList allowLibs() method to query it.
- relocate with/no functionObjects logic from Time to argList
itself as argList allowFunctionObjects()
- add libs/functionObjects override handling to decomposePar etc
ENH: report the stream relativeName for IOerrors (see c9333a5ac8)
- clearer coding intent. Mark operator() as 'deprecated'
- add bounds checking to get(label) and set(label) methods.
This gives failsafe behaviour for get() that is symmetric with
HashPtrTable, autoPtr etc and aligns the set(label) methods
for UPtrList, PtrList and PtrDynList.
- use top-level PtrList::clone() instead of cloning individual elements
ENH: support HashPtrTable set with refPtr/tmp (flexibility)
- simplifies coding
* finishedRequest(), waitRequest(), waitRequests() with parRun guards
* nRequests() is noexcept
- more consistent use of UPstream::defaultCommsType in branching
- the output write scaling should be applied *after* undoing the
effects of the specified rotation centre. Fixes#2566
ENH: update option names for transformPoints and surfaceTransformPoints
- prefer '-auto-centre' and '-centre', but also accept the previous
options '-auto-origin' and '-origin' as aliases.
Changing to '-centre' avoids possible confusion with
coordinate system origin().
