Computes the heat transfer coefficient [W/m2/K] using a run-time
selectable model:
- ReynoldsAnalogy
- fixedReferenceTemperature
- localReferenceTemperature
- disallow insert() of raw pointers, since a failed insertion
(ie, entry already existed) results in an unmanaged pointer.
Either insert using an autoPtr, or set() with raw pointers or autoPtr.
- IOobjectList::add() now takes an autoPtr instead of an object reference
- IOobjectList::remove() now returns an autoPtr instead of a raw pointer
- default is now without polyhedral decomposition, since this produces
compacter files and VTK mananges this in most instances.
However, provide function object flag to reinstate the old behaviour.
Calculates and outputs a field whose values are offset to a reference
value obtained by sampling the field at a user-specified location.
The field values are calculated using:
\f[
f_c = s(f_{c,t} - f_p + f_{off})
\f]
where
\vartable
f_c | field values at cell
s | optional scale factor (default = 1)
f_{c,t} | current field values at cell at this time
f_p | field value at position
f_{off} | offset field value (default = 0)
\endvartable
Usage
Example of function object specification to calculate the reference
field:
\verbatim
pRef
{
type reference;
libs ("libfieldFunctionObjects.so");
...
field p;
result pRef;
position (0 0 0);
scale 1.2;
offset 100000;
}
\endverbatim
- improvement documentation for surface sampling.
- can now specify alternative sampling scheme for obtaining the
face values instead of just using the "cell" value. For example,
sampleScheme cellPoint;
This can be useful for cases when the surface is close to a boundary
cell and there are large gradients in the sampled field.
- distanceSurface now handles non-closed surfaces more robustly.
Unknown regions (not inside or outside) are marked internally and
excluded from consideration. This allows use of 'signed' surfaces
where not previously possible.
- The iterator for a HashSet dereferences directly to its key.
- Eg,
for (const label patchi : patchSet)
{
...
}
vs.
forAllConstIter(labelHashSet, patchSet, iter)
{
const label patchi = iter.key();
...
}
- The bitSet class replaces the old PackedBoolList class.
The redesign provides better block-wise access and reduced method
calls. This helps both in cases where the bitSet may be relatively
sparse, and in cases where advantage of contiguous operations can be
made. This makes it easier to work with a bitSet as top-level object.
In addition to the previously available count() method to determine
if a bitSet is being used, now have simpler queries:
- all() - true if all bits in the addressable range are empty
- any() - true if any bits are set at all.
- none() - true if no bits are set.
These are faster than count() and allow early termination.
The new test() method tests the value of a single bit position and
returns a bool without any ambiguity caused by the return type
(like the get() method), nor the const/non-const access (like
operator[] has). The name corresponds to what std::bitset uses.
The new find_first(), find_last(), find_next() methods provide a faster
means of searching for bits that are set.
This can be especially useful when using a bitSet to control an
conditional:
OLD (with macro):
forAll(selected, celli)
{
if (selected[celli])
{
sumVol += mesh_.cellVolumes()[celli];
}
}
NEW (with const_iterator):
for (const label celli : selected)
{
sumVol += mesh_.cellVolumes()[celli];
}
or manually
for
(
label celli = selected.find_first();
celli != -1;
celli = selected.find_next()
)
{
sumVol += mesh_.cellVolumes()[celli];
}
- When marking up contiguous parts of a bitset, an interval can be
represented more efficiently as a labelRange of start/size.
For example,
OLD:
if (isA<processorPolyPatch>(pp))
{
forAll(pp, i)
{
ignoreFaces.set(i);
}
}
NEW:
if (isA<processorPolyPatch>(pp))
{
ignoreFaces.set(pp.range());
}
- generalize some of the library extensions (.so vs .dylib).
Provide as wmake 'sysFunctions'
- added note about unsupported/incomplete system support
- centralize detection of ThirdParty packages into wmake/ subdirectory
by providing a series of scripts in the spirit of GNU autoconfig.
For example,
have_boost, have_readline, have_scotch, ...
Each of the `have_<package>` scripts will generally provide the
following type of functions:
have_<package> # detection
no_<package> # reset
echo_<package> # echoing
and the following type of variables:
HAVE_<package> # unset or 'true'
<package>_ARCH_PATH # root for <package>
<package>_INC_DIR # include directory for <package>
<package>_LIB_DIR # library directory for <package>
This simplifies the calling scripts:
if have_metis
then
wmake metisDecomp
fi
As well as reducing clutter in the corresponding Make/options:
EXE_INC = \
-I$(METIS_INC_DIR) \
-I../decompositionMethods/lnInclude
LIB_LIBS = \
-L$(METIS_LIB_DIR) -lmetis
Any additional modifications (platform-specific or for an external build
system) can now be made centrally.
- IOstreamOption class to encapsulate format, compression, version.
This is ordered to avoid internal padding in the structure, which
reduces several bytes of memory overhead for stream objects
and other things using this combination of data.
Byte-sizes:
old IOstream:48 PstreamBuffers:88 Time:928
new IOstream:24 PstreamBuffers:72 Time:904
====
STYLE: remove support for deprecated uncompressed/compressed selectors
In older versions, the system/controlDict used these types of
specifications:
writeCompression uncompressed;
writeCompression compressed;
As of DEC-2009, these were deprecated in favour of using normal switch
names:
writeCompression true;
writeCompression false;
writeCompression on;
writeCompression off;
Now removed these deprecated names and treat like any other unknown
input and issue a warning. Eg,
Unknown compression specifier 'compressed', assuming no compression
====
STYLE: provide Enum of stream format names (ascii, binary)
====
COMP: fixed incorrect IFstream construct in FIREMeshReader
- spurious bool argument (presumably meant as uncompressed) was being
implicitly converted to a versionNumber. Now caught by making
IOstreamOption::versionNumber constructor explicit.
- bad version specifier in changeDictionary
- the expansions were previously required as slash to follow, but
now either are possible.
"<case>", "<case>/" both yield the same as "$FOAM_CASE" and
will not have a trailing slash in the result. The expansion of
"$FOAM_CASE/" will however have a trailing slash.
- adjust additional files using these expansions
- both autoPtr and tmp are defined with an implicit construct from
nullptr (but with explicit construct from a pointer to null).
Thus is it safe to use 'nullptr' when returning an empty autoPtr or tmp.
- when constructing dimensioned fields that are to be zero-initialized,
it is preferrable to use a form such as
dimensionedScalar(dims, Zero)
dimensionedVector(dims, Zero)
rather than
dimensionedScalar("0", dims, 0)
dimensionedVector("zero", dims, vector::zero)
This reduces clutter and also avoids any suggestion that the name of
the dimensioned quantity has any influence on the field's name.
An even shorter version is possible. Eg,
dimensionedScalar(dims)
but reduces the clarity of meaning.
- NB: UniformDimensionedField is an exception to these style changes
since it does use the name of the dimensioned type (instead of the
regIOobject).
- in many cases can just use lookupOrDefault("key", bool) instead of
lookupOrDefault<bool> or lookupOrDefault<Switch> since reading a
bool from an Istream uses the Switch(Istream&) anyhow
STYLE: relocated Switch string names into file-local scope
- eliminate iterators from PackedList since they were unused, had
lower performance than direct access and added unneeded complexity.
- eliminate auto-vivify for the PackedList '[] operator.
The set() method provides any required auto-vivification and
removing this ability from the '[]' operator allows for a lower
when accessing the values. Replaced the previous cascade of iterators
with simpler reference class.
PackedBoolList:
- (temporarily) eliminate logic and addition operators since
these contained partially unclear semantics.
- the new test() method tests the value of a single bit position and
returns a bool without any ambiguity caused by the return type
(like the get() method), nor the const/non-const access (like
operator[] has). The name corresponds to what std::bitset uses.
- more consistent use of PackedBoolList test(), set(), unset() methods
for fewer operation and clearer code. Eg,
if (list.test(index)) ... | if (list[index]) ...
if (!list.test(index)) ... | if (list[index] == 0u) ...
list.set(index); | list[index] = 1u;
list.unset(index); | list[index] = 0u;
- deleted the operator=(const labelUList&) and replaced with a setMany()
method for more clarity about the intended operation and to avoid any
potential inadvertent behaviour.
This class is largely a pre-C++11 holdover. It is now possible to
simply use move construct/assignment directly.
In a few rare cases (eg, polyMesh::resetPrimitives) it has been
replaced by an autoPtr.
Improve alignment of its behaviour with std::shared_ptr
- element_type typedef
- swap, reset methods
* additional reference access methods:
cref()
returns a const reference, synonymous with operator().
This provides a more verbose alternative to using the '()' operator
when that is desired.
Mnemonic: a const form of 'ref()'
constCast()
returns a non-const reference, regardless if the underlying object
itself is a managed pointer or a const object.
This is similar to ref(), but more permissive.
Mnemonic: const_cast<>
Using the constCast() method greatly reduces the amount of typing
and reading. And since the data type is already defined via the tmp
template parameter, the type deduction is automatically known.
Previously,
const tmp<volScalarField>& tfld;
const_cast<volScalarField&>(tfld()).rename("name");
volScalarField& fld = const_cast<volScalarField&>(tfld());
Now,
tfld.constCast().rename("name");
auto& fld = tfld.constCast();
--
BUG: attempts to move tmp value that may still be shared.
- old code simply checked isTmp() to decide if the contents could be
transfered. However, this means that the content of a shared tmp
would be removed, leaving other instances without content.
* movable() method checks that for a non-null temporary that is
unique (not shared).
Improve alignment of its behaviour with std::unique_ptr
- element_type typedef
- release() method - identical to ptr() method
- get() method to get the pointer without checking and without releasing it.
- operator*() for dereferencing
Method name changes
- renamed rawPtr() to get()
- renamed rawRef() to ref(), removed unused const version.
Removed methods/operators
- assignment from a raw pointer was deleted (was rarely used).
Can be convenient, but uncontrolled and potentially unsafe.
Do allow assignment from a literal nullptr though, since this
can never leak (and also corresponds to the unique_ptr API).
Additional methods
- clone() method: forwards to the clone() method of the underlying
data object with argument forwarding.
- reset(autoPtr&&) as an alternative to operator=(autoPtr&&)
STYLE: avoid implicit conversion from autoPtr to object type in many places
- existing implementation has the following:
operator const T&() const { return operator*(); }
which means that the following code works:
autoPtr<mapPolyMesh> map = ...;
updateMesh(*map); // OK: explicit dereferencing
updateMesh(map()); // OK: explicit dereferencing
updateMesh(map); // OK: implicit dereferencing
for clarity it may preferable to avoid the implicit dereferencing
- prefer operator* to operator() when deferenced a return value
so it is clearer that a pointer is involve and not a function call
etc Eg, return *meshPtr_; vs. return meshPtr_();
- Eg instead of using labelHashSet, used HashSet<label> which uses
the string::hash for hashing. Other places inadvertently using the
string::hash instead of Hash<label> for hashing.
STYLE: use Map<..> instead of HashTable<.., label, Hash<label>>
- reduces clutter
NOTE: The radiative flux (qr) is positive when the heat flux is going into the wall,
this is oposite the the he flux which is positive going out of the wall.
