Based on:
Cao, L., Sun, F., Chen, T., Tang, Y., & Liao, D. (2018).
Quantitative prediction of oxide inclusion defects inside
the casting and on the walls during cast-filling processes.
International Journal of Heat and Mass Transfer, 119, 614-623.
DOI:10.1016/j.ijheatmasstransfer.2017.11.127
Co-authored-by: Kutalmis Bercin <kutalmis.bercin@esi-group.com>
- all flags before loaders. Avoids "uninitialized when used here"
warning while preserving the field ownership logic.
- relocate override of updateT basicThermo into constructor body
for clearer logic and initialization
STYLE: plain bool instead of Switch for dpdt flag
1) Adding subMesh capabilities to momentumError and div FOs.
- A subMesh is created from cellZones.
- The operators (div, etc) are only calculated in the subMesh.
2) Optionally, halo cells can be added to the cellZones.
3) New helper class to handle the subMesh creation and field mapping.
- additional dummy template parameter to assist with supporting
derived classes. Currently just used for string types, but can be
extended.
- provide hash specialization for various integer types.
Removes the need for any forwarding.
- change default hasher for HashSet/HashTable from 'string::hash'
to `Hash<Key>`. This avoids questionable hashing calls and/or
avoids compiler resolution problems.
For example,
HashSet<label>::hasher and labelHashSet::hasher now both properly
map to Hash<label> whereas previously HashSet<label> would have
persistently mapped to string::hash, which was incorrect.
- standardize internal hashing functors.
Functor name is 'hasher', as per STL set/map and the OpenFOAM
HashSet/HashTable definitions.
Older code had a local templated name, which added unnecessary
clutter and the template parameter was always defaulted.
For example,
Old: `FixedList<label, 3>::Hash<>()`
New: `FixedList<label, 3>::hasher()`
Unchanged: `labelHashSet::hasher()`
Existing `Hash<>` functor namings are still supported,
but deprecated.
- define hasher and Hash specialization for bitSet and PackedList
- add symmetric hasher for 'face'.
Starts with lowest vertex value and walks in the direction
of the next lowest value. This ensures that the hash code is
independent of face orientation and face rotation.
NB:
- some of keys for multiphase handling (eg, phasePairKey)
still use yet another function naming: `hash` and `symmHash`.
This will be targeted for alignment in the future.
- simplifies local toggling.
- centralize fileModification static variables into IOobject.
They were previously scattered between IOobject and regIOobject
- centralises existing functions (erfInv, incGamma*, invIncGamma*).
Provides a location for additional functions in the future.
- adjusted existing models to use these functions
(e.g. distributionModels::normal)
1) PhaseIncompressibleTurbulenceModel class was changed to use
uniform alpha and non-uniform rho templates. This fits the need
of incompressible two phase turbulence models.
2) A new type DPMIncompressibleTurbulenceModel was created for
non-uniform alpha and uniform rho. It is used in single phase flows
in DPM solvers where alpha represents the volumen occupancy.
3) A new type incompressibleRhoTurbulenceModel was created where
non-uniform rho is allowed.
4) A new base templated turbulent class for two-phase VOF named
VoFphaseTurbulentTransportModel was implemented which is created
templating on PhaseIncompressibleTurbulenceModel and
incompressibleRhoTurbulenceModel
5) In order to make the chnage to rho based VOF turbulence a help
class was added incompressibleInterPhaseTransportModel templated
on the mixing.
Member function dKcdTbyKc in thermo.H is calculated from S and G at Pstd.
Thus dGdT was removed from the thermos.
- Add optional hRef, eRef and Tref as optional.
- Use new thermo to multiphase solver icoReactingMuliPhaseFoam
- Remove hRefConst and eRefConst thermos.
TUT: Updated tutorials
- deprecated Feb-2018, but not marked as such.
The set() method originally enforce an additional run-time check
(Fatal if pointer was already set), but this was rarely used.
In fact, the set() method was invariably used in constructors
where the pointer by definition was unset.
Can now mark as deprecated to catch the last of these.
We prefer reset() for similarity with std::unique_ptr
Eg,
FOAM_EXTRA_CXXFLAGS="-DFoam_autoPtr_deprecate_setMethod" wmake
Reduce the number of phaseSystems libraries:
- phaseSystems previously had a number of smaller libraries to provide
interface and model properties, etc. This potential flexibility was
never actually used anywhere, but causes cyclic dependencies between
phaseSystem and the models (and turbulence) that causes extreme
difficulty for mingw linking (issue #1238).
- libincompressibleMultiphaseSystems
- removed: libmassTransferModels
- libmultiphaseSystem
- removed: libcompressibleMultiphaseEulerianInterfacialModels
- libreactingMultiphaseSystem
- removed: libreactingPhaseSystem
- removed: libreactingEulerianFvPatchFields
- removed: libreactingEulerianInterfacialCompositionModels
- removed: libreactingEulerianInterfacialModels
- removed: libmultiphaseReactingTurbulenceModels
- libreactingTwoPhaseSystem
- removed: libreactingPhaseSystem
- removed: libreactingEulerianFvPatchFields
- removed: libreactingEulerianInterfacialCompositionModels
- removed: libreactingEulerianInterfacialModels
Avoid duplicate symbol for phaseCompressibleTurbulenceModels
Common turbulence models are defined in libreactingMultiphaseSystem,
and libmultiphaseReactingTurbulenceModels is now redundant.
The libtwoPhaseReactingTurbulenceModels extends the common models
for reactingTwoPhaseSystem.
In certain turbulence models such as kEpsilon, kOmegaSST, etc when used
in the multiphase context throw an error in the preconditioner. This
is due to alpha being zero. Fixes#1789.
- with '&&' conditions, often better to check for non-null autoPtr
first (it is cheap)
- check as bool instead of valid() method for cleaner code, especially
when the wrapped item itself has a valid/empty or good.
Also when handling multiple checks.
Now
if (ptr && ptr->valid())
if (ptr1 || ptr2)
instead
if (ptr.valid() && ptr->valid())
if (ptr1.valid() || ptr2.valid())
ENH: add log FO
ENH: improve log with scale, and offset entries
BUG: ensure extrueMesh does not fail in parallel with wedge extrusion
BUG: add missing clone and mapping funcs to copiedFixedValue, fixedMultiPhaseHeatFlux
ENH: meshToMesh0::cellAddressing slight speed up for some geometries
BUG:0003495: Divide-by-zero in SHF particle break-up model
BUG:0003492: The formula in the OF is inconsistent with the Rosin-Rammler distribution theory formula
The phase systems tables for multiphase solvers create conflict
between each other as they are defined in the same namespace and using
similar class names.
Therefore a special htc function object for reactingEulerSolver was
added (reactingEulerHtcModel), located under
src/phaseSystemModels/reactingEulerFoam/functionObjects/
This commit includes the following:
- Relocate solvers/reactingEulerFoam functionObjects to
src/phaseSystemModels
- Remove links for fieldFunctionObject to multiphase libs to avoid
conflicts
- New FO for htc for reactingEulerFoam called reactingEulerHtcModel
- previously introduced `getOrDefault` as a dictionary _get_ method,
now complete the transition and use it everywhere instead of
`lookupOrDefault`. This avoids mixed usage of the two methods that
are identical in behaviour, makes for shorter names, and promotes
the distinction between "lookup" access (ie, return a token stream,
locate and return an entry) and "get" access (ie, the above with
conversion to concrete types such as scalar, label etc).
multiphaseReactingTurbulenceModels and twoPhaseReactingTurbulenceModels
add models to the same table TurbulenceModel. These two libs were removed
from libreactingPhaseSystem which created the conflict.
The multiphaseReactingTurbulenceModels was added to
reactingMultiPhaseEulerFoam solver and twoPhaseReactingTurbulenceModels to
twoPhaseReactingEulerFoam solver
The FO heatTransferCoeffs for libfieldFunctionObjects needs
twoPhaseReactingTurbulenceModels.
These change avoids linking conflict from multiphaseReactingTurbulenceModels
and twoPhaseReactingTurbulenceModels being linked in the same lib.
