- UPstream::mpiGather (MPI_Gather) - used by Pstream::listGatherValues
- UPstream::mpiScatter (MPI_Scatter) - used by Pstream::listScatterValues
These are much simpler forms for gather/scatter of fixed-sized
contiguous types data types (eg, primitives, simple pairs etc).
In the gather form, creates a list of gathered values on the master
process. The subranks have a list size of zero.
Similarly, scatter will distribute a list of values to single values
on each process.
Instead of
labelList sendSizes(Pstream::nProcs());
sendSizes[Pstream::myProcNo()] = sendData.size();
Pstream::gatherList(sendSizes);
Can write
const labelList sendSizes
(
UPstream::listGatherValues<label>(sendData.size())
);
// Less code, lower overhead and list can be const.
For scattering an individual value only,
instead of
labelList someValues;
if (Pstream::master()) someValues = ...;
Pstream::gatherList(sendSizes);
const label localValue
(
someValues[Pstream::myProcNo()]
);
Can write
labelList someValues;
if (Pstream::master()) someValues = ...;
Pstream::gatherList(sendSizes);
const label localValue
(
UPstream::listScatterValues<label>(someValues)
);
Can of course also mix listGatherValues to assemble a list on master
and use Pstream::scatterList to distribute.
ENH: adjusted globalIndex gather methods
- added mpiGather() method [contiguous data only] using MPI_Gatherv
- respect localSize if gathering master data to ensure that a
request for 0 master elements is properly handled.
- the size of a List often requires adjustment prior to an operation,
but old values (if any) are not of interest and will be overwritten.
In these cases can use the _nocopy versions to avoid additional memory
overhead of the intermediate list and the copy/move overhead of
retaining the old values (that we will subsequently discard anyhow).
No equivalent for PtrList/UPtrList - this would be too fragile.
- add swap DynamicField with DynamicList
BUG: fixed Dynamic{Field,List} setCapacity corner case
- for the case when the newly requested capacity coincides with the
current addressable size, the resize of the underlying list would have
been bypassed - ie, the real capacity was not actually changed.
- remove (unused) PtrDynList setCapacity method as too fragile
- previously returned the range slice as a UList,
but this prevents convenient assignment.
Apply similar handling for Field/SubField
Allows the following
labelRange range(...);
fullList.slice(range) = identity(range.size());
and
fullList.slice(range) = UIndirectList<T>(other, addr);
ENH: create SubList from full FixedList (simplifies interface)
- allow default constructed SubList. Use shallowCopy to 'reset' later
- previously used an indirect patch to get the sampling locations,
but this doesn't take account of the face flips. Now use
the faceZone intrinsic for generating a properly flipped patch
and provide the sampling locations separately.
STYLE: adjust compatiblity header for surfaceMeshWriter
- supports redistributePar -decompose -fileHandler collated
- supports redistributePar -reconstruct
- does not support redistributePar with collated in redistribution mode
- noticed by Robin Knowles with `decomposePar -fields -copyZero`
The internals for the Foam:cp method combine the behaviour of
a regular `cp` and `cp -R` combined.
When source and target are both directories, the old implementation
created a subdirectory for the contents.
This normally fine,
ok: cp "path1/0/" to "path2/1" -> "path2/1/2"
BUT: cp "path1/0/" to "path2/0" -> "path2/0/0" !!
Now add check for the basenames first.
If they are identical, we probably meant to copy directory contents
only, without the additional subdir layer.
BUG: decomposePar -fields -copyZero copies the wrong directory
- was using the current time name (usually latest) instead of copying
the 0 directory
ENH: accept 0.orig directories as a fallback to copy if the 0 directory
is missing
- avoid deprecated autoPtr check
- bundle bool values in fvPatchField for compacter allocation
- change useImplicit to a set method taking an argument instead of
allowing direct access.
- support simple mesh subsetting to vtu formats to enable debug output
for a subsection of an existing polyMesh
- rudimentary support for VTK from cellShapes is intended for handling
basic primitive cell shapes without a full blown polyMesh description.
For example,
// Create an empty polyMesh with points only
polyMesh debugMesh
(
io,
std::move(points),
faceList(), // faces
labelList(), // owner
labelList(), // neighbour
true // syncPar
);
// Establish the appropriate VTK sizing for the TET shapes
vtk::vtuCells vtuCells;
vtuCells.resetShapes(debugCutTets);
vtuCells.nPoints(debugMesh.nPoints());
NOTE
Since the vtk::internalMeshWriter only uses the polyMesh reference
for the points, it is also possible to create the vtuCells
description without a pointField (or from a different mesh
description) and write out the connectivity using the pointField
from a different mesh.
- allows reuse similar to refPtr for wrapping different content.
- additional control for when contents are copied back,
instead of waiting for the adaptor to go out of scope.
Eg,
if (adaptor.active())
{
adaptor.commit();
adaptor.clear();
}
- static ConstPrecisionAdaptor::get method renamed to 'select' as a
better description of its purpose and avoid confusion with
non-static 'get' method.
Was previously only used within GAMGPreconditioner, but even there
it is better just to use the ConstPrecisionAdaptor directly.
- support non-uniform scaling, prescaling and cartesian coordinate
transformations.
Eg, stretch in one direction and then rotate
```
prescale (1.5 1 1);
transform
{
origin (0 0 0);
rotation
{
type axisAngle;
axis (0 0 1);
angle 45;
}
}
```
- support "transformed" versions of blockMesh vertices, topology.
With the additional of transformations etc, a simplistic application
of a single scale parameter is no longer sufficient.
new: blMesh.vertices(true);
old: blMesh.vertices() * blMesh.scaleFactor();
new: blMesh.topology(true);
old: N/A
- add individual edge access for blockDescriptor.
Saves copying and duplicate calculations.
- handle '(block face)' specification for curved faces,
which is ok for external block faces, but likely somewhat
questionable if used for internal block faces.
- Can specify
```
transform
{
origin (1 2 3);
rotation none;
}
```
instead of the longer form
```
transform
{
origin (1 2 3);
e1 (1 0 0);
e3 (0 0 1);
}
```
COMPAT: remove old (pre-1812) Euler and STARCD keywords
- use "angles", remove old compat name "rotation"
as clutter and possible confusion with "coordinate rotation"
STYLE: remove coordinate rotation move constructors
- an unnecessary holdover from older code.
The original thermoSurfaceFilm sub-models were divided between kinematicSurfaceFilm and thermoSurfaceFilm in order to use the surfaceFilm model in a kinematicCloud.
The film interaction models are now in a kinematicSurface class which can be used in a kinematic cloud adding constant thermal properties (p and T) for some sub-models, e.g. drySplashInteraction/wetSplashInteraction.
pRef and Tref were added to the kinematicSurfaceFilm as entry to the regionFilm when used with a kinematic cloud.
In the finite area surface film model Tref, pRef are stored in filmSubModelBase.
TUT: kinematicParcelFoam: new tutorial pitzDailySprinkles
