- code reduction, documentation, code stubs for spheroid (#1901)
- make searchableSurfaceCollection available as 'collection'
for consistency with other objects
- in most cases this eliminates manually calculation of circumferential
points.
TUT: improve parameterization of sphere blockMeshDict
- allow separate parameterization of radius, ratio of inner to outer,
and the number of divisions in x/y/z and radial directions
- slipped in with changes to csvTableReader (commit 59ed3ba18d) so
only affects the 2006 version.
- adjust constructor to expect "componentColumns", but also accept
"valueColumns" as 1912 and earlier-compatibility. This not only
fixes the reported bug, but also ensure proper compatibility with
older files.
ENH: use "refColumn" instead of "timeColumn" for csvTableReader
- consistent with the CSV Function1.
Support 'timeColumn' as 1912 and earlier-compatibility.
TUT: remove unused table-reader entry
- the earlier implementation of externally controlled lumped point
motion (see merge request !120 and OpenFOAM-v1706 release notes) was
conceived for the motion of simple structures such as buildings or
simple beams. The motion controller was simply defined in terms of
an orientation axis and divisions along that axis.
To include complex structures, multiple motion controllers are
defined in terms of support points and connectivity.
The points can have additional node Ids associated with them, which
makes it easier to map to/from FEA models.
OLD system/lumpedPointMovement specification
--------------------------------------------
//- Reference axis for the locations
axis (0 0 1);
//- Locations of the lumped points
locations (0 0.05 .. 0.5);
NEW system/lumpedPointMovement specification
--------------------------------------------
// Locations of the lumped points
points
(
(0 0 0.00)
(0 0 0.05)
...
(0 0 0.50)
);
//- Connectivity for motion controllers
controllers
{
vertical
{
pointLabels (0 1 2 3 4 5 6 7 8 9 10);
}
}
And the controller(s) must be associated with the given
pointDisplacement patch. Eg,
somePatch
{
type lumpedPointDisplacement;
value uniform (0 0 0);
controllers ( vertical ); // <-- NEW
}
TUT: adjust building motion tutorial
- use new controllor definitions
- replace building response file with executable
- add updateControl in dynamicMeshDict for slowly moving structure
- use simpler decomposeParDict in tutorials, several had old
'boilerplate' decomposeParDict
- use simpler libs () format
- update surface sampling to use dictionary format
- Removed some unnecessary dynamicMeshDicts.
- Removed the writeActiveDesignVariables execution from the Allrun
scripts, since it is no longer necessary to execute it before
adjointOptimisationFoam.
- Updated the entries in dynamicMeshDict according to efbc9fc99.
- replace ':' scoping with IOobject::scopedName(), which automatically
uses '_' for Windows compilations where the ':' is a meta-character
(drive separator)
- apply similar local change for the momentum function object.
*** This topic will be revisited in the future ***
Please refer to the header file documentation for complete set of details.
ENH: add new fvOptions for ABL modelling
- atmAmbientTurbSource
- atmBuoyancyTurbSource
- atmCoriolisUSource
- atmLengthScaleTurbSource
- atmPlantCanopyTurbSource
- atmPlantCanopyUSource
- atmPlantCanopyTSource
- atmNutSource
ENH: add new boundary conditions for ABL modelling
with PatchFunction1 and TimeFunction1 support
- atmAlphatkWallFunction
- atmEpsilonWallFunction
- atmNutkWallFunction
- atmNutUWallFunction
- atmNutWallFunction
- atmOmegaWallFunction
- atmTurbulentHeatFluxTemperature
STYLE: change names of nutkAtmRoughWallFunction -> atmNutkWallFunction by
ensuring the bitwise backward compatibility
ENH: add new variable-scaling force computation method to actuationDiskSource
ENH: review actuationDiskSource and radialActuationDiskSource
ENH: add new function object, ObukhovLength
ENH: add new ABL tutorials/verifications
- verificationAndValidation/atmosphericModels/atmFlatTerrain
- verification with the Leipzig field experiment
- illustration of precursor/successor field mapping
- verificationAndValidation/atmosphericModels/atmForestStability
- verification with the Sweden field experiment
- update incompressible/simpleFoam/turbineSiting
ENH: update libs of etc/caseDicts/postProcess items
ENH: ensure destructor=default
ENH: ensure constness
ENH: ensure no 'copy construct' and 'no copy assignment' exist
TUT: add examples of function objects with full set
of settings into a TUT if unavailable
TUT: update pisoFoam/RAS/cavity tutorial in terms of usage
ENH: add generalised log-law type ground-normal inflow boundary conditions for
wind velocity and turbulence quantities for homogeneous, two-dimensional,
dry-air, equilibrium and neutral atmospheric boundary layer (ABL) modelling
ENH: remove `zGround` entry, which is now automatically computed
ENH: add `displacement height` entry, `d`
ENH: add generalised atmBoundaryLayerInletOmega boundary condition
ENH: add a verification case for atmBoundaryLayerInlet BCs
DOC: improve atmBoundaryLayerInlet header documentation
BUG: fix value-entry behaviour in atmBoundaryLayerInlet (fixes#1578)
Without this change:
- for serial-parallel computations, if `value` entry is available in
an `atmBoundaryLayerInlet` BC, the theoretical ABL profile expressions
are not computed, and the `value` entry content is used as a profile data
- for parallel computations, if `value` entry is not available, `decomposePar`
could not be executed.
With this change:
- assuming `value` entry is always be present, the use of `value` entry for
the ABL profile specification is determined by a flag `initABL`
- the default value of the optional flag `initABL` is `true`, but whenever
`initABL=true` is executed, `initABL` is overwritten as `false` for the
subsequent runs, so that `value` entry can be safely used.
Thanks Per Jørgensen for the bug report.
BUG: ensure atmBoundaryInlet conditions are Galilean-invariant (fixes#1692)
Related references:
The ground-normal profile expressions (tag:RH):
Richards, P. J., & Hoxey, R. P. (1993).
Appropriate boundary conditions for computational wind
engineering models using the k-ε turbulence model.
In Computational Wind Engineering 1 (pp. 145-153).
DOI:10.1016/B978-0-444-81688-7.50018-8
Modifications to preserve the profiles downstream (tag:HW):
Hargreaves, D. M., & Wright, N. G. (2007).
On the use of the k–ε model in commercial CFD software
to model the neutral atmospheric boundary layer.
Journal of wind engineering and
industrial aerodynamics, 95(5), 355-369.
DOI:10.1016/j.jweia.2006.08.002
Expression generalisations to allow height
variation for turbulence quantities (tag:YGCJ):
Yang, Y., Gu, M., Chen, S., & Jin, X. (2009).
New inflow boundary conditions for modelling the neutral equilibrium
atmospheric boundary layer in computational wind engineering.
J. of Wind Engineering and Industrial Aerodynamics, 97(2), 88-95.
DOI:10.1016/j.jweia.2008.12.001
The generalised ground-normal profile expression for omega (tag:YGJ):
Yang, Y., Gu, M., & Jin, X., (2009).
New inflow boundary conditions for modelling the
neutral equilibrium atmospheric boundary layer in SST k-ω model.
In: The Seventh Asia-Pacific Conference on Wind Engineering,
November 8-12, Taipei, Taiwan.
Reproduced benchmark:
Rectangular prism shown in FIG 1 of
Hargreaves, D. M., & Wright, N. G. (2007).
On the use of the k–ε model in commercial CFD software
to model the neutral atmospheric boundary layer.
Journal of wind engineering and
industrial aerodynamics, 95(5), 355-369.
DOI:10.1016/j.jweia.2006.08.002
Benchmark data:
HW, 2007 FIG 6
TUT: update simpleFoam/turbineSiting tutorial accordingly
STDMD (i.e. Streaming Total Dynamic Mode Decomposition) is a variant of
a data-driven dimensionality reduction method.
STDMD is being used as a mathematical post-processing tool to compute
a set of dominant modes out of a given flow (or dataset) each of which is
associated with a constant frequency and decay rate, so that dynamic
features of a given flow may become interpretable, and tractable.
Among other Dynamic Mode Decomposition (DMD) variants, STDMD is presumed
to provide the general DMD method capabilities alongside economised and
feasible memory and CPU usage.
Please refer to the header file documentation for further details.
ENH: add new STDMD tutorial, pimpleFoam/laminar/cylinder2D
- enumerated values are (points | topology) which can be optionally
specified in the blockMeshDict. Default is 'topology'.
If the command-line option `blockMesh -merge-points` is specified,
this has absolute priority over any blockMeshDict entry.
STYLE: changed blockMesh "-blockTopology" option to "-write-obj"
- this is more specific to what it does. Potentially wish to add a
"-write-vtk" option in the future.
TUT: adjust tutorials to use preferred or necessary merge strategies:
* channel395DFSEM - topology
* nozzleFlow2D - points
* pipeCyclic - points
- base level surface container is now a meshedSurface instead of
a triSurface. This avoid automatic triangulation of surfaces
when they are read, and simplifies the internals.
- sampling types:
* "meshedSurface" (compat: "sampledTriSurfaceMesh")
* "meshedSurfaceNormal" (compat: "sampledTriSurfaceMeshNormal")
