While p and pmh (pd in OpenFOAM-1.5.?) are equivalent on orthogonal meshes they
are not on non-orthogonal meshes and the difference is very important for
buoyancy-dominated flows such as settling. settlingFoam is now written in terms
of pmh (static pressure minus hydrostatic pressure) which used to be called pd
but that confused too may people.
pointsInstance.
For now also dump topology related sets to pointsInstance since otherwise
paraFoam cannot see them (only looks at first 'sets' directory when searching
back)
- Rewrote globalPoints to use globalIndex class so now only transfers
single label instead of labelPair
- Added addressing in globalMeshData
- from coupled master points to slave points
- ,, edges ,, edges
- from coupled points (master or slave) to uncoupled boundary faces
- ,, ,, cells
- See test/globalMeshData for simple test
http://www.geometrictools.com/LibPhysics/RigidBody/RigidBody.html
in surfaceInertia utility. Allows calculation of shell or solid
properties of a triSurface, with optionally specified volumetric or
surface density. Default behaviour is to calculate inertia around
centre of mass, with option to specify reference point.
Various test surfaces supplied and tested against analytical results.
- Previously had just 'Warning' instead of '::Foam::Warning', which
meant that an identically named class method would inadvertently be
used - resulting in a compile failure.
When faceZones are present one has to decide whether to have zone faces
only on the edge of cellZones or also freestanding.
The setting for minMedialAxisAngle was corrected since the calculation
has also been corrected.
Read only support:
.bdf, .nas - NASTRAN format. Handles both CBEAM and CROD as lines.
CROD is what Hypermesh happens to output.
Write only support:
.vtk - VTK legacy format in ASCII
Read/write support:
.eMesh - native format, which is simply a list of points, edges
with an additional IOobject header that lets them be moved about
easily to use as a featureEdgeMesh.
.inp - STAR-CD inp/cel/vrt combination
IOobject header)
.obj - Alias waverfront format
Radically simplify surfaceFeatureConvert by using the new edgeMesh
functionality.
