Specified using the optional 'omega' entry (Function1 type), e.g. for a constant
value:
omega 12.56;
Note that the swirl contribution is applied in addition to the velocity set by
the 'flowType' option. For example, for the 'constantVelocity' option, parcels
are initially set the velocity according to the UMag and direction/cone angle;
the swirl velocity is then added.
- similar to surface writing formats, also support optional
dictionary of reading options. The main beneficiary of this is the
ensight surface reader:
readOptions
{
ensight
{
masterOnly true;
}
}
This will restrict reading to the master rank. Surfaces and values
read will be broadcast to the other ranks, with the intention of
reducing load on the filesystem.
ENH: add writing of Dimensioned fields for areaWrite functionObject
- can be useful for examining finite-area source terms
- flowRate: volume flow-rate through given patches
- flowRatePartition: distribution of the inlet flow-rate to certain
outlet patches, with given percentages
- uniformityPatch: uniformity of the velocity field at given (outlet) patches,
expressed as (half) the variance of the velocity field
- uniformityCellZone: same as uniformityPatch, but defined over
cellZones
- powerDissipation: the fluid power dissipation taking place within
given cellZones. In the absence of viscous stress at the "inlets" and
"outlets" of the cellZones, this corresponds to the volume flow-rate
weighted total pressure losses through the cellZones
ENH: updated nutSqr so it can be used with adjointkOmegaSST too
to help allocate pointers related to contributions to the adjoint
turbulence model PDEs, populate them and check the validity of the
cellZones provided for cellZone-based objectives
This pack adds a new entry 'parcelTypes' which can specify the list of
parcel type IDs interacting with a surface film. If the entry
is omitted, all particle types are considered.
```
surfaceFilmModel kinematicSurfaceFilm;
kinematicSurfaceFilmCoeffs
{
interactionType absorb;
// Optional list of participating parcel IDs
parcelTypes (10);
}
```
To set the parcel type by injector, 'injectorID' entry can be used
when specifying the injector models, e.g.
```
injectionModels
{
model1
{
type <injectionModelType>;
// Optional injector ID
// - if ommitted, parcels use '-1'
injectorID 10;
...
}
}
```
