to support laminar simulations in the new framework.
Unfortunately this allows LES models to be instantiated although they
are not compatible with steady-state simulations.
Select LTS via the ddtScheme:
ddtSchemes
{
default localEuler rDeltaT;
}
The LTS algorithm is controlled with the standard settings in
controlDict, e.g.:
maxCo 0.5;
maxDeltaT 2e-8;
with the addition of the optional rDeltaT smoothing coefficient:
rDeltaTSmoothingCoeff 0.02;
which defaults to 0.02.
For cases with reasonably uniform meshes like the forwardStep tutorial
LTS does not provide much benefit but for cases with large variation in
cell-size like the biconic25-55Run35 tutorial LTS provides significant
speed-up to convergence particularly if started from uniform conditions.
Reverted changes proposed in
http://openfoam.org/mantisbt/view.php?id=1548 as it adversely affects
fixed-value BCs and is formulated to fix an issue with an unphysical
case. Further analysis of the handling of fixed pressure outlet
conditions as the Mach number approaches 1 is required.
Use the trace as the limiter function for both symmTensor and tensor to
bound the normal stresses rather than the shear stresses.
Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=1751
Multi-species, mass-transfer and reaction support and multi-phase
structure provided by William Bainbridge.
Integration of the latest p-U and face-p_U algorithms with William's
multi-phase structure is not quite complete due to design
incompatibilities which needs further development. However the
integration of the functionality is complete.
The results of the tutorials are not exactly the same for the
twoPhaseEulerFoam and reactingTwoPhaseEulerFoam solvers but are very
similar. Further analysis in needed to ensure these differences are
physical or to resolve them; in the meantime the twoPhaseEulerFoam
solver will be maintained.
Model which applies an analytical solution for heat transfer from the
surface of a sphere to the fluid within the sphere.
Provided by William Bainbridge
by introducing rational base-classes rather than using the hideous
'switch' statement. Further rationalization of the cell-selection
mechanism will be implemented via an appropriate class hierarchy to
replace the remaining 'switch' statement.
Mesh-motion is currently handled very inefficiently for cellSets and not
at all for inter-region coupling. The former will be improved when the
cell-selection classes are written and the latter by making the
meshToMesh class a MeshObject after it has been corrected for mapFields.
fvOptions does not have the appropriate structure to support MRF as it
is based on option selection by user-specified fields whereas MRF MUST
be applied to all velocity fields in the particular solver. A
consequence of the particular design choices in fvOptions made it
difficult to support MRF for multiphase and it is easier to support
frame-related and field related options separately.
Currently the MRF functionality provided supports only rotations but
the structure will be generalized to support other frame motions
including linear acceleration, SRF rotation and 6DoF which will be
run-time selectable.
SIMPLEC (SIMPLE-consistent) is selected by setting "consistent" option true/yes:
SIMPLE
{
nNonOrthogonalCorrectors 0;
consistent yes;
}
which relaxes the pressure in a "consistent" manner and additional
relaxation of the pressure is not generally necessary. In addition
convergence of the p-U system is better and reliable with less
aggressive relaxation of the momentum equation, e.g. for the motorbike
tutorial:
relaxationFactors
{
equations
{
U 0.9;
k 0.7;
omega 0.7;
}
}
The cost per iteration is marginally higher but the convergence rate is
better so the number of iterations can be reduced.
The SIMPLEC algorithm also provides benefit for cases with large
body-forces, e.g. SRF, see tutorials/incompressible/SRFSimpleFoam/mixer
and feature request http://www.openfoam.org/mantisbt/view.php?id=1714
