- marks if the value is considered to be independent of 'x'.
Propagate into PatchFunction1 instead ad hoc checks there.
- adjust method name in PatchFunction1 to 'whichDb()' to reflect
final changes in Function1 method names.
ENH: add a Function1 'none' placeholder function
- This is principally useful for interfaces that expect a Function1
but where it is not necessarily used by a particular submodel.
TUT: update Function1 creation to use objectRegistry
- previously had codeAddSup used for both incompressible and
compressible source terms. However, it was not actually possible to
use it for compressible sources since any references to the 'rho'
parameter would cause a compilation error for the incompressible case.
Added 'codeAddSupRho' to distinguish the compressible case.
User must supply one or both of them on input.
- for compilers such as gcc and clang, may have several different
variants installed on the computer. Use WM_COMPILER_CONTROL to
specify the preferred variant.
Eg,
WM_COMPILER=Gcc
WM_COMPILER_CONTROL="version=8"
will compile with "gcc-8" and "g++-8"
Good practice would be to tag output directory names with the
version too. Eg
WM_COMPILER=Clang110
WM_COMPILER_CONTROL="version=11.0"
STYLE: modify message for change of gcc -> clang (darwin)
- it is now possible to include the selected mpi version in the
top-level bashrc or prefs.sh file. For example,
WM_MPLIB=OPENMPI-4.1.1 or WM_MPLIB=openmpi-4.1.1
after evaluation of the config.sh/mpi, this will define
WM_MPLIB=OPENMPI-4.1.1 and FOAM_MPI=openmpi-4.1.1
During the wmake, the mpi-rules will first load the MPI 'family'
rules (OPENMPI in this example) before trying to load
version-specific rules if they exist.
NOTE: the regular user-defined prefs system is unaffected by this
change. This means it is still possible to use a file such as
'prefs.openmpi' to define the preferred version instead or as well.
However, it does mean inconsistent naming can be specified.
For example, specify WM_MPLIB=OPENMPI-4.1.1 at the top-level but
actually have FOAM_MPI=openmpi-4.0.6 in the prefs.openmpi file.
This will make the value of WM_MPLIB misleading.
CONFIG: foamConfigurePaths support for sys-openmpi major version
CONFIG: cleanup any shadow env variables
- migrate to c++14 for most compilers *except* gcc.
There are still many systems in use with gcc-4.8.5, which does not
support c++14.
- initial rules for nvidia compilers (pgi is will soon be defunct).
Not fully tested...
CONFIG: provide fallback value for the user directory name
- in containers may have an unset USER env variable.
Default to 'user' to prevent ugly looking directory names.
- use orte-info to determine prefix/libdir for openmpi.
This removes a run-time dependency on mpicc, which is actually
only needed for building with MPI (not running with MPI).
The corresponding openmpi devel package (deb/rpm) will not
necessarily be installed on a particular system.
- retain mpicc logic if the new logic using orte-info does not
deliver an answer. Final fallback to using 'orterun' to
infer prefix/libdir.
- Additional logic for intel and msmpi to make it easier to
locate these vendor packages within ThirdParty
(ie, under ThirdParty/opt/...)
CONFIG: improve robustness
- add check for absolute path when adding PATH/LD_LIBRARY_PATH etc.
- prefix more variables with '_foam*' to prevent accidental overwrite
of userspace shell variables when sourcing
- previously a function (unlike the csh version) but since bashrc and
setup have been split -> replace with inline definition
STYLE: formatting/wording for openfoam starters
TUT: simplify controlDict modification, add default substitution
ENH: accept '/' for end-of-options terminator (etc/openfoam)
- makes the application or service more apparent.
* eg. /usr/bin/openfoam / blockMesh
* vs. /usr/bin/openfoam -- blockMesh
Accept lone '-' as the end-of-options terminator, as per bash
- Adjust handling of openfoam '-c' option to flag that a command-string
will appear, but continue with option parsing.
Consistent with bash definition.
- adjust commented-out evaluation to avoid warnings.
With code like this
```
#if 0
nxin #eval{ round($nxin / 5) };
#endif
```
The handling of the "#if 0 / #endif" clause uses the plain ISstream
parser to tokenize. This means that the "round(" is parsed as a word
with a mismatched closing ')', whereas the "#eval" parser will slurp
everything in until the closing brace and send it off as a string
to the expression parser.
Computes a selected operation between multiple \c fieldValue function
objects.
The operation is applied to all results of each \c fieldValue object.
Note
Each object must generate the same number and type of results.
Usage
Minimal example by using \c system/controlDict.functions:
multiFieldValue1
{
// Mandatory entries (unmodifiable)
type multiFieldValue;
libs (fieldFunctionObjects);
// Mandatory entries (runtime modifiable)
operation subtract;
// List of fieldValue function objects as dictionaries
functions
{
region1
{
...
}
region2
{
...
}
...
regionN
{
...
}
}
// Optional (inherited) entries
...
}
where the entries mean:
Property | Description | Type | Req'd | Dflt
type | Type name: multiFieldValue | word | yes | -
libs | Library name: fieldFunctionObjects | word | yes | -
operation | Operation type to apply to values | word | yes | -
functions | List of fieldValue function objects | dict | yes | -
\endtable
Options for the \c operation entry:
add | add
subtract | subtract
min | minimum
max | maximum
average | average
Deprecated fieldValueDelta
- The fieldValueDelta function object was originally written to compute the
difference between two fieldValue-type function objects. The multiFieldValue
object name better describes its purpose whilst being able to operate on an
arbitrary number of fieldValue-type objects.
- additional -serial/-parallel option:
prefer Allrun-serial or Allrun-parallel if available
- optional -output=DIR to preserve output
ENH: report missing tutorials/ directory in RunFunctions
- in some cases, additional dictionary inputs are useful for extending
the input parameters or functionality of dynamic coded conditions.
Typically this can be used to provide a simple set of dictionary
inputs that are used to drive specific code, but allows changing the
inputs without causing a recompilation.
Accessed with this type of code:
```
const dictionary& dict = this->codeContext();
```
boundary conditions and function objects:
* specify an additional codeContext dictionary entry:
```
codeContext
{
...
}
```
PatchFunction1:
* The code context dictionary is simply the dictionary used to specify
the PatchFunction1 coefficients.
To replicated persistant data, use local member static data.
Eg,
```
code
#{
// Persistent (Member) Data
static autoPtr<Function1<scalar>> baseVel;
static autoPtr<Function1<vector>> baseDir;
...
#}
```
fvOptions:
* currently not applicable
- meshTools include/library for many (most) coded items
- add PatchFunction1 include for coded BCs to provide ready access
to Function1 and PatchFunction1
- largely as per patch from Jong-Gwan (Jason) Do
NB: the intel-one setup adds in paths for intelmpi.
Its mpicc version does not harmonize with the OpenFOAM
system openmpi setup (using mpicc --showme:link).
Needs adjustment, or use intelmpi instead.
- update name mappings for newer gcc, clang versions
It was only looking for faces that were used in both
endpoints but not actually checking whether they were indeed
an edge (== consecutive vertex) in all faces. So if one
face had an additional crossing edge and another didn't it
would find more edgeFaces than the proper
'primitiveMesh::edgeFaces()' routine.
This occasionally happened inside snappyHexMesh
(e.g. motorBike tutorial)
- previously had a very old (likely irrelevant) setting for solaris
systems only.
- support site-specific customization.
Eg, using etc/config.{csh,sh}/prefs.fjmpi
- remove erroneous shell redirects present in cshell files
- if the system/decomposeParDict is missing, skip check for matching
number of processor dirs. This can make job dispatch easier.
Does not apply if -decomposeParDict was explicitly specified.
STYLE: adjust naming of host/slaves in argList
- can use either command-line option "-load-fields" or dictionary
entry "readFields" to specify field names to be preloaded.
Essentially the same functionality as with a readFields function
object but with a lot less typing.
- tutorial examples provided by Ryan Danks <ryan.danks@rwdi.com>
illustrate using setExpr* utilities to calculate a quantity
as a post-processing step.
- previously always called dlclose on opened libraries when destroying
the dlLibraryTable. However, by force closing the libraries the
situation can arise that the library is missing its own code that it
needs on unload (#1524). This is also sometimes evident when closing
VTK libraries for runTimePostProcessing (#354, #1585).
- The new default is to not forcibly dlclose any libraries, unless
the dlcloseOnTerminate OptimisationSwitch specifies otherwise.
- The dlLibraryTable::close() method can be used to explicitly close
all libraries and clear the list.
- The dlLibraryTable::clear() method now only clears the entries,
without a dlclose.
- easier support for non-mandatory functions.
In some boundary conditions it can be desirable to support
additional functions, but not necessarily require them. Make this
easier to support with a Function1, PatchFunction1 NewIfPresent()
selector.
- support for compatibility lookups
- harmonize branching logic and error handling between Function1 and
PatchFunction1.
ENH: refactor a base class for Function1, PatchFunction1
- includes base characteristics, patch or scalar information
ENH: additional creation macros
- makeConcreteFunction1, makeConcretePatchFunction1Type for adding a
non-templated function into the correct templated selection table.
makeScalarPatchFunction1 for similarity with makeScalarFunction1
