Style changes:
- use std algorithm for some stringOps internals
- pass SubStrings iterators by const reference
ENH: special nullptr handling for ISstream getLine
- pass through to istream::ignore to support read and discard
1) Adding interfaceHeight FO
2) Adding interfaceHeatResistance mass transfer model to
interCondensatingEvaporatingFoam with spread source approach
3) Reworking framework for icoReactingMultiphaseInterFoam
* Support default values for format/compress enum lookups.
- Avoids situations where the preferred default format is not ASCII.
For example, with dictionary input:
format binar;
The typing mistake would previously have caused formatEnum to
default to ASCII. We can now properly control its behaviour.
IOstream::formatEnum
(
dict.get<word>("format"), IOstream::BINARY
);
Allowing us to switch ascii/binary, using BINARY by default even in
the case of spelling mistakes. The mistakes are flagged, but the
return value can be non-ASCII.
* The format/compression lookup behave as pass-through if the lookup
string is empty.
- Allows the following to work without complaint
IOstream::formatEnum
(
dict.getOrDefault("format", word::null), IOstream::BINARY
);
- Or use constructor-like failsafe method
IOstream::formatEnum("format", dict, IOstream::BINARY);
- Apply the same behaviour with setting stream format/compression
from a word.
is.format("binar");
will emit a warning, but leave the stream format UNCHANGED
* Rationalize versionNumber construction
- constexpr constructors where possible.
Default construct is the "currentVersion"
- Construct from token to shift the burden to versionNumber.
Support token as argument to version().
Now:
is.version(headerDict.get<token>("version"));
or failsafe constructor method
is.version
(
IOstreamOption::versionNumber("version", headerDict)
);
Before (controlled input):
is.version
(
IOstreamOption::versionNumber
(
headerDict.get<float>("version")
)
);
Old, uncontrolled input - has been removed:
is.version(headerDict.lookup("version"));
* improve consistency, default behaviour for IOstreamOption construct
- constexpr constructors where possible
- add copy construct with change of format.
- construct IOstreamOption from streamFormat is now non-explicit.
This is a commonly expected result with no ill-effects
- align Switch more with Enum.
Now have find(), found() static methods.
Constructors with failsafe option.
The find() method makes for clearer coding:
OLD
Switch sw(some_string, true); // NB: true = allowBad
if (sw.valid()) ...
NOW
Switch sw = Switch::find(some_string);
if (sw.good()) ...
or
if (Switch::found(some_string)) ...
- improve construct from dictionary to handle all valid token types.
Previously just read in a word.
- Remove asText() method - replaced by c_str() and str() several
versions ago.
- renamed 'core/' -> 'base/' to avoid gitignore masking when re-adding
files
- rename 'nas/' to 'nastran/' for more clarity
- relocated OBJstream from surfMesh to fileFormats
STYLE: remove unused parseNASCoord. Was deprecated 2017-09
- `tensor` and `tensor2D` returns complex eigenvalues/vectors
- `symmTensor` and `symmTensor2D` returns real eigenvalues/vectors
- adds new test routines for eigendecompositions
- improves numerical stability by:
- using new robust algorithms,
- reordering the conditional branches in root-type selection
- ensures each Tensor-container operates for the following base types:
- floatScalar
- doubleScalar
- complex
- adds/improves test applications for each container and base type:
- constructors
- member functions
- global functions
- global operators
- misc:
- silently removes `invariantIII()` for `tensor2D` and `symmTensor2D`
since the 3rd invariant does not exist for 2x2 matrices
- fixes `invariantII()` algorithm for `tensor2D` and `symmTensor2D`
- adds `Cmpt` multiplication to `Vector2D` and `Vector`
- adds missing access funcs for symmetric containers
- improves func/header documentations
- includes restructuring and simplification of low-level ensight part
handling and refactor of backends to improve code reuse.
foamToEnsight
-------------
* new cellZone support.
This was previously only possible via a separate foamToEnsightParts
utility that was not parallelized.
* support for point fields.
* `-nearCellValue` option (as per foamToVTK)
* data indexing now uses values from the time index.
This is consistent with the ensightWrite function object and
can help with restarts.
* existing ensight directories are removed, unless the -no-overwrite
option is supplied
foamToEnsightParts
------------------
* now redundant and removed.
ensightOutputSurface (new class)
--------------------------------
* a lightweight wrapper for point/face references that is tailored
for the ensightSurfaceWriter. It uses compact face/point information
and is serial only, since this is the format requirements from the
surfaceWriter class.
ensightMesh (revised class)
---------------------------
* now only holds a polyMesh reference, which removes its dependency
on finiteVolume and allows it to be relocated under fileFormats
instead of conversion.
Removed classes: ensightParts, ensighPartFaces, ensightPartCells
- these were used by foamToEnsightParts, but not needed anymore.
- simplifies code, covers most cases.
Can use wmake -show-api or wmakeBuildInfo to query the make rules.
STYLE: Allwmake script adjustments
- use bin/foamEtcFile instead of relying on PATH.
The make environment may not have the OpenFOAM bin/ in it.
- simpler shell syntax
- provides an indirect access to a sub-section of a list that is
somewhat less efficient than a Foam::SubList, but supports the
following:
* adjustment of its addressing range after construction
* recovery of the original, underlying list at any time
This can be more convenient for some coding cases.
For example,
template<class Addr>
void renumberFaces(IndirectListBase<face, Addr>& faces, ...);
which can be called for
* Specific faces:
UIndirectList<face>(mesh.faces(), facesToChange)
* A sub-range of faces:
IndirectSubList<face>(mesh.faces(), pp.range())
* All faces:
IndirectSubList<face>(mesh.faces())
CONFIG: added IndirectListsFwd.H with some common forwarding
- remove (unused) Istream constructors, prune some unused methods,
rationalize write() vs writeDict().
Deprecate inconsistent construction order.
- handle empty names for ".ftr" surface patches (for plain triSurface
format) with double-quoted strings for more reliable streaming.
Written on a single line.
This is _backward_ compatible, but if users have been parsing these
files manually, they will need to adjust their code.
Previously:
```
(
frt-fairing:001%1
empty
windshield:002%2
empty
...
)
```
Updated (with example handling of empty name):
```
(
frt-fairing:001%1 empty
windshield:002%2 ""
...
)
```
The controlBoxes wordList was removed from NURBS3DVolume in the
pre-release phase but writeMorpherCPs was not updated accordingly.
TUT: added the invocation of writeMorpherCPs in one of the tutotials to
help identify future regression
Many possibilities:
- use as a simple calculator with vectors, tensors etc.
- test validity of expression syntax
As a calculator:
foamCalc '(vector(1,2,3) ^ vector(4,5,6)) * sqrt(34)'
The same, but with debugging:
foamCalc -debug-switch fieldExpr=6 \
'mag((vector(1,2,3) ^ vector(4,5,6))) * sqrt(34)'
1) New skewCorrectedSnGrad for non-orthogonal and skewness corrector
2) New freeSurfacePressure and freeSurfacePressure working with
interfaceTrackingFvMesh
3) New interfaceTrackingFvMesh
- now use debug 2 for scanner and debug 4 for parser.
Provided better feedback about what is being parsed (debug mode)
- relocate debug application to applications/tools/foamExprParserInfo
- the PDRsetFields utility processes a set of geometrical obstructions
to determine the equivalent blockage effects.
These fields are necessary inputs for PDRFoam calculations.
After setting up the geometries, the -dry-run option can be used to
generate a VTK file for diagnosis and post-processing purposes.
- this is an initial release, with improvements slated for the future.
NOTE
- the field results may be less than fully reliable when run in
single-precision. This howver does not represent a realistic
restriction since the prepared fields target a combustion
application which will invariably be double-precision.
- follows the principle of least surprise if the expansion behaviour
for #eval and expressions (eg, exprFixedValue) are the same. This
is possible now that we harness the regular stringOps::expand()
within exprString::expand()
- The previous option 'write-nut' controlled the writing of turbulence
nut, but other turbulence fields were always written.
These have been shown to be a source of instability for many cases.
This commit replaces the 'write-nut' option by a 'writeTurbulenceFields'
option that controls the writing of all turbulence fields.
If not set, only the velocity field is written.
For compatibility, the old 'write-nut' option is still recognized
but is redirected to 'writeTurbulenceFields'.
