- allows restricted evaluation to specific coupled patch types.
Code relocated/refactored from redistributePar.
STYLE: ensure use of waitRequests() also corresponds to nonBlocking
ENH: additional copy/move construct GeometricField from DimensionedField
STYLE: processorPointPatch owner()/neighbour() as per processorPolyPatch
STYLE: orientedType with bool cast operator and noexcept
- adds handling of negative start times for masterUncollatedFileOperation
as well (#1112).
- handle failures *after* restoring non-parRun mode.
This ensures exit(FatalError) will exit MPI properly as well.
STYLE: replace "polyMesh" with polyMesh::meshSubDir
STYLE: adjust IOobject read/write enumerated values
- provision for possible bitwise handling
- additional Pstream::broadcasts() method to serialize/deserialize
multiple items.
- revoke the broadcast specialisations for std::string and List(s) and
use a generic broadcasting template. In most cases, the previous
specialisations would have required two broadcasts:
(1) for the size
(2) for the contiguous content.
Now favour reduced communication over potential local (intermediate)
storage that would have only benefited a few select cases.
ENH: refine PstreamBuffers access methods
- replace 'bool hasRecvData(label)' with 'label recvDataCount(label)'
to recover the number of unconsumed receive bytes from specified
processor. Can use 'labelList recvDataCounts()' to recover the
number of unconsumed receive bytes from all processor.
- additional peekRecvData() method (for transcribing contiguous data)
ENH: globalIndex whichProcID - check for isLocal first
- reasonable to assume that local items are searched for more
frequently, so do preliminary check for isLocal before performing
a more costly binary search of globalIndex offsets
ENH: masterUncollatedFileOperation - bundled scatter of status
- use vector::removeCollinear a few places
COMP: incorrect initialization order in edgeFaceCirculator
COMP: Silence boost bind deprecation warnings (before CGAL-5.2.1)
- `functions<scalar>` and `functions<vector>` were erroneously
documented in header as `lookup<scalar>` etc.
INT: handle fluent square brackets (fixes#2429)
- patch applied from openfoam.org
- bundles frequently used 'gather/scatter' patterns more consistently.
- combineAllGather -> combineGather + broadcast
- listCombineAllGather -> listCombineGather + broadcast
- mapCombineAllGather -> mapCombineGather + broadcast
- allGatherList -> gatherList + scatterList
- reduce -> gather + broadcast (ie, allreduce)
- The allGatherList currently wraps gatherList/scatterList, but may be
replaced with a different algorithm in the future.
STYLE: PstreamCombineReduceOps.H is mostly unneeded now
STYLE: LduInterfaceFieldPtrsList as alias instead of a class
STYLE: define patch lists typedefs when defining the base patch
- eg, polyPatchList typedef within polyPatch.H
INT: relocate GeometricField::Boundary -> GeometricBoundaryField
- was internal to GeometricField but moving it outside simplifies
forward declarations etc. Code adapted from openfoam.org
- when writing surface formats (eg, vtk, ensight etc) the sampled
surfaces merge the faces/points originating from different
processors into a single surface (ie, patch gatherAndMerge).
Previous versions of mergePoints simply merged all points possible,
which proves to be rather slow for larger meshes. This has now been
modified to only consider boundary points, which reduces the number
of points to consider. As part of this change, the reference point
is now always equivalent to the min of the bounding box, which
reduces the number of search loops. The merged points retain their
original order.
- inplaceMergePoints version to simplify use and improve code
robustness and efficiency.
ENH: make PrimitivePatch::boundaryPoints() less costly
- if edge addressing does not already exist, it will now simply walk
the local face edges directly to define the boundary points.
This avoids a rather large overhead of the full faceFaces,
edgeFaces, faceEdges addressing.
This operation is now more important since it is used in the revised
patch gatherAndMerge.
ENH: topological merge for mesh-based surfaces in surfaceFieldValue
- also disables PointData if manifold cells are detected.
This is a partial workaround for volPointInterpolation problems
with handling manifold cells.
- additional verbosity option for conversions
- ignore old `-finite-area` option and always convert available
finiteArea mesh/fields unless `-no-finite-area` is specified (#2374)
ENH: simplify point offset handling for ensight output
- extend writing to include compact face/cell lists
- a try/catch approach is not really robust enough (or even possible)
since read failures likely do not occur on all ranks simultaneously.
This leads to situations where the master has thrown an exception
(and thus exiting the current routine) while other ranks are still
waiting to receive data and the program blocks completely.
Since this primarily affects data conversion routines such as
foamToEnsight etc, treat similarly to lagrangian: check for the
existence of essential files before proceeding or not. This is
wrapped into a TryNew factory method:
autoPtr<faMesh> faMeshPtr(faMesh::TryNew(mesh));
if (faMeshPtr) ...
- less communication than gatherList/scatterList
ENH: refine send granularity in Pstream::exchange
STYLE: ensure PstreamBuffers and defaultCommsType agree
- simpler loops for lduSchedule
- the very old 'writer' class was fully stateless and always templated
on an particular output type.
This is now replaced with a 'coordSetWriter' with similar concepts
as previously introduced for surface writers (#1206).
- writers change from being a generic state-less set of routines to
more properly conforming to the normal notion of a writer.
- Parallel data is done *outside* of the writers, since they are used
in a wide variety of contexts and the caller is currently still in
a better position for deciding how to combine parallel data.
ENH: update sampleSets to sample on per-field basis (#2347)
- sample/write a field in a single step.
- support for 'sampleOnExecute' to obtain values at execution
intervals without writing.
- support 'sets' input as a dictionary entry (as well as a list),
which is similar to the changes for sampled-surface and permits use
of changeDictionary to modify content.
- globalIndex for gather to reduce parallel communication, less code
- qualify the sampleSet results (properties) with the name of the set.
The sample results were previously without a qualifier, which meant
that only the last property value was actually saved (previous ones
overwritten).
For example,
```
sample1
{
scalar
{
average(line,T) 349.96521;
min(line,T) 349.9544281;
max(line,T) 350;
average(cells,T) 349.9854619;
min(cells,T) 349.6589286;
max(cells,T) 350.4967271;
average(line,epsilon) 0.04947733869;
min(line,epsilon) 0.04449639927;
max(line,epsilon) 0.06452856475;
}
label
{
size(line,T) 79;
size(cells,T) 1720;
size(line,epsilon) 79;
}
}
```
ENH: update particleTracks application
- use globalIndex to manage original parcel addressing and
for gathering. Simplify code by introducing a helper class,
storing intermediate fields in hash tables instead of
separate lists.
ADDITIONAL NOTES:
- the regionSizeDistribution largely retains separate writers since
the utility of placing sum/dev/count for all fields into a single file
is questionable.
- the streamline writing remains a "soft" upgrade, which means that
scalar and vector fields are still collected a priori and not
on-the-fly. This is due to how the streamline infrastructure is
currently handled (should be upgraded in the future).
Automatic hole closure:
- introduces 'holeToFace' topoSet source
- used when detecting a 'leak-path'
- creates additional baffles to close the leak
Multi-stage layer addition:
- Can add layers in multiple passes
See issues: #2403, #2404
- for metis-like graphs there is no guarantee that a zero-sized graph
has an offsets list with size 1 or size 0, so always use
numCells = max(0, xadj.size()-1)
this was already done in most places, but missed in the
decomposeGeneral method
STYLE: use sumOp<label>() instead of plusOp<label>()
- PstreamBuffers nProcs() and allProcs() methods to recover the rank
information consistent with the communicator used for construction
- allowClearRecv() methods for more control over buffer reuse
For example,
pBufs.allowClearRecv(false);
forAll(particles, particlei)
{
pBufs.clear();
fill...
read via IPstream(..., pBufs);
}
This preserves the receive buffers memory allocation between calls.
- finishedNeighbourSends() method as compact wrapper for
finishedSends() when send/recv ranks are identically
(eg, neighbours)
- hasSendData()/hasRecvData() methods for PstreamBuffers.
Can be useful for some situations to skip reading entirely.
For example,
pBufs.finishedNeighbourSends(neighProcs);
if (!returnReduce(pBufs.hasRecvData(), orOp<bool>()))
{
// Nothing to do
continue;
}
...
On an individual basis:
for (const int proci : pBufs.allProcs())
{
if (pBufs.hasRecvData(proci))
{
...
}
}
Also conceivable to do the following instead (nonBlocking only):
if (!returnReduce(pBufs.hasSendData(), orOp<bool>()))
{
// Nothing to do
pBufs.clear();
continue;
}
pBufs.finishedNeighbourSends(neighProcs);
...
GIT: relocate globalIndex (is independent of mesh)
STYLE: include label/scalar Fwd in contiguous.H
STYLE: unneed commSchedule include in GeometricField
- do not need STRINGIFY macros in ragel code
- remove wordPairHashTable.H and use equivalent wordPairHashes.H instead
STYLE: replace addDictOption with explicit option
- the usage text is otherwise misleading
GIT: combine Pair/Tuple2 directories
- unused in regular OpenFOAM code
- POSIX version uses deprecated gethostbyname()
- Windows version never worked
COMP: localize, noexcept on internal OSspecific methods
STYLE: support fileName::Type SYMLINK and LINK as synonyms
- set() was silently deprecated in favour of reset() FEB-2018
since the original additional check for overwriting an existing
pointer was never used. The reset(...) name is more consistent
with unique_ptr, tmp etc.
Now emit deprecations for set().
- use direct test for autoPtr, tmp instead of valid() method.
More consistent with unique_ptr etc.
STYLE: eliminate redundant ptr() use on cloned quantities
- literal lookups only for expression strings
- code reduction for setExprFields.
- changed keyword "condition" to "fieldMask" (option -field-mask).
This is a better description of its purpose and avoids possible
naming ambiguities with functionObject triggers (for example)
if we apply similar syntax elsewhere.
BUG: erroneous check in volumeExpr::parseDriver::isResultType()
- not triggered since this method is not used anywhere
(may remove in future version)
