- previously a function (unlike the csh version) but since bashrc and
setup have been split -> replace with inline definition
STYLE: formatting/wording for openfoam starters
TUT: simplify controlDict modification, add default substitution
ENH: accept '/' for end-of-options terminator (etc/openfoam)
- makes the application or service more apparent.
* eg. /usr/bin/openfoam / blockMesh
* vs. /usr/bin/openfoam -- blockMesh
Accept lone '-' as the end-of-options terminator, as per bash
- Adjust handling of openfoam '-c' option to flag that a command-string
will appear, but continue with option parsing.
Consistent with bash definition.
- adjust commented-out evaluation to avoid warnings.
With code like this
```
#if 0
nxin #eval{ round($nxin / 5) };
#endif
```
The handling of the "#if 0 / #endif" clause uses the plain ISstream
parser to tokenize. This means that the "round(" is parsed as a word
with a mismatched closing ')', whereas the "#eval" parser will slurp
everything in until the closing brace and send it off as a string
to the expression parser.
Computes a selected operation between multiple \c fieldValue function
objects.
The operation is applied to all results of each \c fieldValue object.
Note
Each object must generate the same number and type of results.
Usage
Minimal example by using \c system/controlDict.functions:
multiFieldValue1
{
// Mandatory entries (unmodifiable)
type multiFieldValue;
libs (fieldFunctionObjects);
// Mandatory entries (runtime modifiable)
operation subtract;
// List of fieldValue function objects as dictionaries
functions
{
region1
{
...
}
region2
{
...
}
...
regionN
{
...
}
}
// Optional (inherited) entries
...
}
where the entries mean:
Property | Description | Type | Req'd | Dflt
type | Type name: multiFieldValue | word | yes | -
libs | Library name: fieldFunctionObjects | word | yes | -
operation | Operation type to apply to values | word | yes | -
functions | List of fieldValue function objects | dict | yes | -
\endtable
Options for the \c operation entry:
add | add
subtract | subtract
min | minimum
max | maximum
average | average
Deprecated fieldValueDelta
- The fieldValueDelta function object was originally written to compute the
difference between two fieldValue-type function objects. The multiFieldValue
object name better describes its purpose whilst being able to operate on an
arbitrary number of fieldValue-type objects.
- additional -serial/-parallel option:
prefer Allrun-serial or Allrun-parallel if available
- optional -output=DIR to preserve output
ENH: report missing tutorials/ directory in RunFunctions
- in some cases, additional dictionary inputs are useful for extending
the input parameters or functionality of dynamic coded conditions.
Typically this can be used to provide a simple set of dictionary
inputs that are used to drive specific code, but allows changing the
inputs without causing a recompilation.
Accessed with this type of code:
```
const dictionary& dict = this->codeContext();
```
boundary conditions and function objects:
* specify an additional codeContext dictionary entry:
```
codeContext
{
...
}
```
PatchFunction1:
* The code context dictionary is simply the dictionary used to specify
the PatchFunction1 coefficients.
To replicated persistant data, use local member static data.
Eg,
```
code
#{
// Persistent (Member) Data
static autoPtr<Function1<scalar>> baseVel;
static autoPtr<Function1<vector>> baseDir;
...
#}
```
fvOptions:
* currently not applicable
- meshTools include/library for many (most) coded items
- add PatchFunction1 include for coded BCs to provide ready access
to Function1 and PatchFunction1
- largely as per patch from Jong-Gwan (Jason) Do
NB: the intel-one setup adds in paths for intelmpi.
Its mpicc version does not harmonize with the OpenFOAM
system openmpi setup (using mpicc --showme:link).
Needs adjustment, or use intelmpi instead.
- update name mappings for newer gcc, clang versions
It was only looking for faces that were used in both
endpoints but not actually checking whether they were indeed
an edge (== consecutive vertex) in all faces. So if one
face had an additional crossing edge and another didn't it
would find more edgeFaces than the proper
'primitiveMesh::edgeFaces()' routine.
This occasionally happened inside snappyHexMesh
(e.g. motorBike tutorial)
- previously had a very old (likely irrelevant) setting for solaris
systems only.
- support site-specific customization.
Eg, using etc/config.{csh,sh}/prefs.fjmpi
- remove erroneous shell redirects present in cshell files
- if the system/decomposeParDict is missing, skip check for matching
number of processor dirs. This can make job dispatch easier.
Does not apply if -decomposeParDict was explicitly specified.
STYLE: adjust naming of host/slaves in argList
- can use either command-line option "-load-fields" or dictionary
entry "readFields" to specify field names to be preloaded.
Essentially the same functionality as with a readFields function
object but with a lot less typing.
- tutorial examples provided by Ryan Danks <ryan.danks@rwdi.com>
illustrate using setExpr* utilities to calculate a quantity
as a post-processing step.
- previously always called dlclose on opened libraries when destroying
the dlLibraryTable. However, by force closing the libraries the
situation can arise that the library is missing its own code that it
needs on unload (#1524). This is also sometimes evident when closing
VTK libraries for runTimePostProcessing (#354, #1585).
- The new default is to not forcibly dlclose any libraries, unless
the dlcloseOnTerminate OptimisationSwitch specifies otherwise.
- The dlLibraryTable::close() method can be used to explicitly close
all libraries and clear the list.
- The dlLibraryTable::clear() method now only clears the entries,
without a dlclose.
- easier support for non-mandatory functions.
In some boundary conditions it can be desirable to support
additional functions, but not necessarily require them. Make this
easier to support with a Function1, PatchFunction1 NewIfPresent()
selector.
- support for compatibility lookups
- harmonize branching logic and error handling between Function1 and
PatchFunction1.
ENH: refactor a base class for Function1, PatchFunction1
- includes base characteristics, patch or scalar information
ENH: additional creation macros
- makeConcreteFunction1, makeConcretePatchFunction1Type for adding a
non-templated function into the correct templated selection table.
makeScalarPatchFunction1 for similarity with makeScalarFunction1
- prefix FOAM_MPI and library directories with 'sys-' for system
versions for uniform identication.
WM_MPLIB | libdir (FOAM_MPI) | old naming |
SYSTEMMPI | sys-mpi | mpi |
SYSTEMOPENMPI | sys-openmpi | openmpi-system |
- prefix preferences with 'prefs.' to make them more easily
identifiable, and update bin/tools/create-mpi-config accordingly
Old name: config.{csh,sh}/openmpi
New name: config.{csh,sh}/prefs.openmpi
- additional mpi preferences now available:
* prefs.intelmpi
* prefs.mpich
...
CONFIG: added hook for EASYBUILDMPI (eb-mpi), somewhat like USERMPI
- EasyBuild uses mpicc when compiling, so no explicit wmake rules are
used
ENH: support different major versions for system openmpi
- for example, with
WM_MPLIB=SYSTEMOPENMPI2
defines FOAM_MPI=sys-openmpi2 and thus creates lib/sys-openmpi2
ENH: centralize handling of mpi as 'mpi-rules'
Before:
sinclude $(GENERAL_RULES)/mplib$(WM_MPLIB)
sinclude $(DEFAULT_RULES)/mplib$(WM_MPLIB)
ifeq (,$(FOAM_MPI_LIBBIN))
FOAM_MPI_LIBBIN := $(FOAM_LIBBIN)/$(FOAM_MPI)
endif
After:
include $(GENERAL_RULES)/mpi-rules
- also allows variants such as SYSTEMOPENMPI2 to be handled separately
- ensures that subsequent Allwmake scripts know about it.
ENH: add bin/tools/query-detect wrapper for wmake have_* scripts
CONFIG: use project/ThirdParty without additional sanity checks
- no need to test for Allwmake or platforms/ if ThirdParty is located
within the project directory itself.
COMP: add simple mpi test to 00-dummy
- for testing library linkage, etc.
- consistent with FOAM_SIGFPE etc.
- centralize code as error::useAbort() static function to avoid
scattering the logic throughout the code.
ENH: also accept "0" and "1" string values for Switch
- not the normal path for Switch input (eg, from a dictionary), but
consistent with bool definitions and simplifies string parsing.
This means that `FOAM_SIGFPE=1 application` will now also work.
- timeVaryingUniformFixedValue -> uniformFixedValue
- allows a variety of functions (eg, coded, expressions, tables, ...)
- more similarity to finiteVolume patch type
STYLE: remove unused timeVarying... from etc/controlDict
- introduce WM_COMPILE_CONTROL variable to convey control information
into the build rules.
The convention (as per spack):
- '+' to select a feature
- '~' to deselect a feature
Eg, to select the gold linker, and disable openmp
(spaces are not required):
WM_COMPILE_CONTROL="+gold ~openmp"
CONFIG: accept FOAM_EXTRA_LDFLAGS for AMD, gold, Mingw linkers
CONFIG: generalize PROJECT_LIBS (-ldl used almost universally)
