with the more general and flexible 'postProcess' utility and '-postProcess' solver option
Rationale
---------
Both the 'postProcess' utility and '-postProcess' solver option use the
same extensive set of functionObjects available for data-processing
during the run avoiding the substantial code duplication necessary for
the 'foamCalc' and 'postCalc' utilities and simplifying maintenance.
Additionally consistency is guaranteed between solver data processing
and post-processing.
The functionObjects have been substantially re-written and generalized
to simplify development and encourage contribution.
Configuration
-------------
An extensive set of simple functionObject configuration files are
provided in
OpenFOAM-dev/etc/caseDicts/postProcessing
and more will be added in the future. These can either be copied into
'<case>/system' directory and included into the 'controlDict.functions'
sub-dictionary or included directly from 'etc/caseDicts/postProcessing'
using the '#includeEtc' directive or the new and more convenient
'#includeFunc' directive which searches the
'<etc>/caseDicts/postProcessing' directories for the selected
functionObject, e.g.
functions
{
#includeFunc Q
#includeFunc Lambda2
}
'#includeFunc' first searches the '<case>/system' directory in case
there is a local configuration.
Description of #includeFunc
---------------------------
Specify a functionObject dictionary file to include, expects the
functionObject name to follow (without quotes).
Search for functionObject dictionary file in
user/group/shipped directories.
The search scheme allows for version-specific and
version-independent files using the following hierarchy:
- \b user settings:
- ~/.OpenFOAM/\<VERSION\>/caseDicts/postProcessing
- ~/.OpenFOAM/caseDicts/postProcessing
- \b group (site) settings (when $WM_PROJECT_SITE is set):
- $WM_PROJECT_SITE/\<VERSION\>/caseDicts/postProcessing
- $WM_PROJECT_SITE/caseDicts/postProcessing
- \b group (site) settings (when $WM_PROJECT_SITE is not set):
- $WM_PROJECT_INST_DIR/site/\<VERSION\>/caseDicts/postProcessing
- $WM_PROJECT_INST_DIR/site/caseDicts/postProcessing
- \b other (shipped) settings:
- $WM_PROJECT_DIR/etc/caseDicts/postProcessing
An example of the \c \#includeFunc directive:
\verbatim
#includeFunc <funcName>
\endverbatim
postProcess
-----------
The 'postProcess' utility and '-postProcess' solver option provide the
same set of controls to execute functionObjects after the run either by
reading a specified set of fields to process in the case of
'postProcess' or by reading all fields and models required to start the
run in the case of '-postProcess' for each selected time:
postProcess -help
Usage: postProcess [OPTIONS]
options:
-case <dir> specify alternate case directory, default is the cwd
-constant include the 'constant/' dir in the times list
-dict <file> read control dictionary from specified location
-field <name> specify the name of the field to be processed, e.g. U
-fields <list> specify a list of fields to be processed, e.g. '(U T p)' -
regular expressions not currently supported
-func <name> specify the name of the functionObject to execute, e.g. Q
-funcs <list> specify the names of the functionObjects to execute, e.g.
'(Q div(U))'
-latestTime select the latest time
-newTimes select the new times
-noFunctionObjects
do not execute functionObjects
-noZero exclude the '0/' dir from the times list, has precedence
over the -withZero option
-parallel run in parallel
-region <name> specify alternative mesh region
-roots <(dir1 .. dirN)>
slave root directories for distributed running
-time <ranges> comma-separated time ranges - eg, ':10,20,40:70,1000:'
-srcDoc display source code in browser
-doc display application documentation in browser
-help print the usage
pimpleFoam -postProcess -help
Usage: pimpleFoam [OPTIONS]
options:
-case <dir> specify alternate case directory, default is the cwd
-constant include the 'constant/' dir in the times list
-dict <file> read control dictionary from specified location
-field <name> specify the name of the field to be processed, e.g. U
-fields <list> specify a list of fields to be processed, e.g. '(U T p)' -
regular expressions not currently supported
-func <name> specify the name of the functionObject to execute, e.g. Q
-funcs <list> specify the names of the functionObjects to execute, e.g.
'(Q div(U))'
-latestTime select the latest time
-newTimes select the new times
-noFunctionObjects
do not execute functionObjects
-noZero exclude the '0/' dir from the times list, has precedence
over the -withZero option
-parallel run in parallel
-postProcess Execute functionObjects only
-region <name> specify alternative mesh region
-roots <(dir1 .. dirN)>
slave root directories for distributed running
-time <ranges> comma-separated time ranges - eg, ':10,20,40:70,1000:'
-srcDoc display source code in browser
-doc display application documentation in browser
-help print the usage
The functionObjects to execute may be specified on the command-line
using the '-func' option for a single functionObject or '-funcs' for a
list, e.g.
postProcess -func Q
postProcess -funcs '(div(U) div(phi))'
In the case of 'Q' the default field to process is 'U' which is
specified in and read from the configuration file but this may be
overridden thus:
postProcess -func 'Q(Ua)'
as is done in the example above to calculate the two forms of the divergence of
the velocity field. Additional fields which the functionObjects may depend on
can be specified using the '-field' or '-fields' options.
The 'postProcess' utility can only be used to execute functionObjects which
process fields present in the time directories. However, functionObjects which
depend on fields obtained from models, e.g. properties derived from turbulence
models can be executed using the '-postProcess' of the appropriate solver, e.g.
pisoFoam -postProcess -func PecletNo
or
sonicFoam -postProcess -func MachNo
In this case all required fields will have already been read so the '-field' or
'-fields' options are not be needed.
Henry G. Weller
CFD Direct Ltd.
the equivalent functionality is provided by the writeRegisteredObject
functionObject in a MUCH simpler, easier and extensible manner.
functionObject: Removed the now redundant 'timeSet' function.
codedFunctionObject: Added the "codeWrite" entry
for the "write" function for consistency.
The previous method of using the "code" entry for the "write"
function was inconsistent and very confusing.
This changes simplifies the specification of functionObjects in
controlDict and is consistent with the 'libs' option in controlDict to
load special solver libraries.
Support for the old 'functionObjectLibs' name is supported for backward compatibility.
- Avoids the need for the 'OutputFilterFunctionObject' wrapper
- Time-control for execution and writing is now provided by the
'timeControlFunctionObject' which instantiates the processing
'functionObject' and controls its operation.
- Alternative time-control functionObjects can now be written and
selected at run-time without the need to compile wrapped version of
EVERY existing functionObject which would have been required in the
old structure.
- The separation of 'execute' and 'write' functions is now formalized in the
'functionObject' base-class and all derived classes implement the
two functions.
- Unnecessary implementations of functions with appropriate defaults
in the 'functionObject' base-class have been removed reducing
clutter and simplifying implementation of new functionObjects.
- The 'coded' 'functionObject' has also been updated, simplified and tested.
- Further simplification is now possible by creating some general
intermediate classes derived from 'functionObject'.
to have the prefix 'write' rather than 'output'
So outputTime() -> writeTime()
but 'outputTime()' is still supported for backward-compatibility.
Also removed the redundant secondary-writing functionality from Time
which has been superseded by the 'writeRegisteredObject' functionObject.
for consistency with the time controls in controlDict and to avoid
unnecessary confusion. All code and tutorials have been updated.
The old names 'outputControl' and 'outputInterval' are but supported for
backward compatibility but deprecated.
See commit b627924a4bf104521b567d3aa3dc80c864325b1a
Allwmake: Added scripted changes for REALTYPEWIDTH and IDXTYPEWIDTH
Patch contributed by Bruno Santos
Resolves bug-report http://bugs.openfoam.org/view.php?id=2085
Rather than requiring each functionObject to handle failed construction
internally (using the active_ flag) the static member function "viable"
is provided which returns true if construction of the functionObject is
likely to be successful. Failed construction is then handled by the
wrapper-class which constructs the functionObject,
e.g. "OutputFilterFunctionObject".
Given that the type of the dimensioned internal field is encapsulated in
the GeometricField class the name need not include "Field"; the type
name is "Internal" so
volScalarField::DimensionedInternalField -> volScalarField::Internal
In addition to the ".dimensionedInternalField()" access function the
simpler "()" de-reference operator is also provided to greatly simplify
FV equation source term expressions which need not evaluate boundary
conditions. To demonstrate this kEpsilon.C has been updated to use
dimensioned internal field expressions in the k and epsilon equation
source terms.
Patch contributed by Bruno Santos:
- "etc/config.sh/CGAL":
- Indented the contents of the recently added if block.
- Added comment about using system versions.
- Library paths are now only added if the respective version is not "boost-system" and "cgal-system".
- "src/renumber/Allwmake":
It now relies on the previous file to get the version for
Boost (the same way as in "makeCGAL"). This is so that it will also
build "SloanRenumber" if "boost_version" is set to "boost-system".
- "applications/utilities/mesh/generation/Allwmake":
It now also relies on the script "config.sh/CGAL" to get the
version for CGAL. If "cgal_version" is set to "cgal-system", it
will now also build "foamy*Mesh" utilities and respective
libraries.
Resolves report http://www.openfoam.org/mantisbt/view.php?id=1232
1. "foamCompiler" was changed to a more permanent "WM_COMPILER_TYPE"
environment variable, so that it can be used by 3rd party
installation scripts, such as "makeGcc", "makeLLVM" and so on. More
on this will be provided in issue #1215.
2. The script functions such as "_foamSource()" and "_foamAddPath()"
were moved to a new file "etc/config.sh/functions". It has the
ability to set or unset, depending on whether "WM_BASH_FUNCTIONS" is
defined or not. This allows for these functions to be reused by
other scripts, such as "makeGcc".
3. The script "etc/config.sh/CGAL" relies on whether a local
environment variable "SOURCE_CGAL_VERSIONS_ONLY" is defined or not,
so that it will load only the version settings if it's defined. This
is to make it easier to call this script from "makeCGAL". Although
it still feels a bit of a clunky hack, but I didn't manage to deduce
any other way we could do this :( I didn't add indentation within
the if-block, to make it easier to read the changes. In addition,
the local variable "common_path" is used to shorten the length of
the lines and use slightly less repeated code.
4. Added another new script "etc/config.sh/compiler", which has only
the version numbers for the compilers taken out from the "settings"
file. It currently depends on "WM_COMPILER_TYPE" for setting the
variables, the same way it did with "foamCompiler". This script is
now always sourced from the "settings" file, for the following
reasons:
- "makeGCC" and "makeLLVM" can now take advantage of this script file.
- The example "compiler" script (detailed next) can rely on this
script file and then override parameters on-demand, as well as
allowing for system compilers to have dedicated settings, such as
setting "WM_CC". This is similar to how the example environment
script for "paraview" works.
5. To the script "etc/config.sh/example/compiler" were added a few more examples:
- It now starts with a block where it first loads the default "compiler" script.
- Has a "WM_COMPILER=Gcc48u" case example for when we try to use GCC
4.8 in Ubuntu 15.10. This is just to give the idea that in a
particular system, we might have several system-wide compiler
versions. For example, in Ubuntu 15.10, there is GCC 4.7, 4.8 and
5.2, which could be used for testing performances or compatibility
with some other 3rd party library.
- Has the "WM_COMPILER=Icc" case example, related to the original bug
report, where "WM_CC=icc" and "WM_CXX=icpc", so that the user then
simply copies this file to their own local preferences folder.
6. Small bug fix in "etc/config.sh/mpi", where unsetting "minBufferSize" was missing at the end of the script.
7. Small change in "etc/config.sh/paraview", where "CMAKE_ROOT" is set
along with "CMAKE_HOME". This is due to a rare issue that occurs on
people's systems where they have a custom system-wide CMake version
installed and which is used by having "CMAKE_ROOT" set on that
environment. This can mess up OpenFOAM's custom ParaView builds,
given that conflicting CMake versions can lead to not building
ParaView at all.
- For more details about "CMAKE_ROOT":
https://cmake.org/Wiki/CMake_Useful_Variables [^]
8. The scripts "_foamAddPath _foamAddLib _foamAddMan" were not being
unset at the end of "settings". They are now unset at the end of
"bashrc", through a call to the new double-use "functions" script.
Additionally all references to "foamCompiler" have been changed to
"WM_COMPILER_TYPE".
See also http://www.openfoam.org/mantisbt/view.php?id=1232
