ce0cd35185
Patches contributed by Mattijs Janssens:
...
splitMeshRegions: handle flipping of faces for surface fields
subsetMesh: subset dimensionedFields
decomposePar: use run-time selection of decomposition constraints. Used to
keep cells on particular processors. See the decomposeParDict in
$FOAM_UTILITIES/parallel/decomposePar:
- preserveBaffles: keep baffle faces on same processor
- preserveFaceZones: keep faceZones owner and neighbour on same processor
- preservePatches: keep owner and neighbour on same processor. Note: not
suitable for cyclicAMI since these are not coupled on the patch level
- singleProcessorFaceSets: keep complete faceSet on a single processor
- refinementHistory: keep cells originating from a single cell on the
same processor.
decomposePar: clean up decomposition of refinement data from snappyHexMesh
reconstructPar: reconstruct refinement data (refineHexMesh, snappyHexMesh)
reconstructParMesh: reconstruct refinement data (refineHexMesh, snappyHexMesh)
redistributePar:
- corrected mapping surfaceFields
- adding processor patches in order consistent with decomposePar
argList: check that slaves are running same version as master
fvMeshSubset: move to dynamicMesh library
fvMeshDistribute:
- support for mapping dimensionedFields
- corrected mapping of surfaceFields
parallel routines: allow parallel running on single processor
Field: support for
- distributed mapping
- mapping with flipping
mapDistribute: support for flipping
AMIInterpolation: avoid constructing localPoints
2016-05-15 16:36:48 +01:00
450728ea84
Standardized cell, patch, face and processor loop index names
2016-04-25 12:00:53 +01:00
99a10ecea6
Boundary conditions: Added extrapolatedCalculatedFvPatchField
...
To be used instead of zeroGradientFvPatchField for temporary fields for
which zero-gradient extrapolation is use to evaluate the boundary field
but avoiding fields derived from temporary field using field algebra
inheriting the zeroGradient boundary condition by the reuse of the
temporary field storage.
zeroGradientFvPatchField should not be used as the default patch field
for any temporary fields and should be avoided for non-temporary fields
except where it is clearly appropriate;
extrapolatedCalculatedFvPatchField and calculatedFvPatchField are
generally more suitable defaults depending on the manner in which the
boundary values are specified or evaluated.
The entire OpenFOAM-dev code-base has been updated following the above
recommendations.
Henry G. Weller
CFD Direct
2016-02-20 22:44:37 +00:00
56fa7c0906
Update code to use the simpler C++11 template syntax removing spaces between closing ">"s
2016-01-10 22:41:16 +00:00
4eba393fe1
Update code to use the simpler C++11 template syntax
2016-01-10 19:20:16 +00:00
e2ef006b91
applications: Update ...ErrorIn -> ...ErrorInFunction
...
Avoids the clutter and maintenance effort associated with providing the
function signature string.
2015-11-10 17:53:31 +00:00
0bf2543df6
utilities: Correct "End" statement to be consistent with all other applications
2015-02-12 22:14:02 +00:00
525a0b3e0f
decomposePar: Do not register Lagrangian IOFields as the names may conflict with those of volFields
...
Required change to IOobjectList to support the optional no-registration specification
2015-02-12 21:59:17 +00:00
d01afadbc1
Name fields to avoid duplicate registration
2015-02-12 12:33:45 +00:00
6d5dd7e30d
ENH: decomposePar: corrected comment in header
2014-01-28 10:42:46 +00:00
6bdc55c825
ENH: decomposePar: decompose sets
2013-11-27 16:04:15 +00:00
61966615ee
ENH: decomposePar: decompose hexRef8 data (snappyHexMesh)
2013-10-08 14:57:22 +01:00
ba45a48caf
ENH: decomposePar: decomposing cellSets, faceSets, pointSets
2013-06-14 12:46:32 +01:00
34ac08a931
ENH: Code updates following changed to IOobjectList
2013-04-08 15:33:02 +01:00
da17674f0f
ENH: decomposePar,reconsturctPar: added -allRegions option
2012-09-26 12:08:43 +01:00
c1ef233e5d
ENH: pointMesh: use MeshObject form
2012-08-31 12:57:17 +01:00
96f8104ae5
ENH: decomposePar: cache decomposeers if running with multiple times.
2012-04-16 12:37:01 +01:00
25dafe92ea
ENH: decomposePar: add -time option.
2012-04-16 11:36:13 +01:00
7e95308c6b
ENH: decomposePar.C: add shortcircuit to avoid allocating point mappers
2011-12-21 16:16:54 +00:00
ca4b8c347c
ENH: polyMesh,meshSearch: default value on findCell, pointInCell
2011-11-08 17:03:54 +00:00
ee11f9c0e8
ENH: pointInCell, findCell: switchable in-cell algorithm
2011-10-28 11:33:30 +01:00
c2dd153a14
Copyright transfered to the OpenFOAM Foundation
2011-08-14 12:17:30 +01:00
ff3b9eeff6
ENH: Added DimensionedField handling to decomposePar
2011-06-01 17:39:57 +01:00
c3cb632c24
Documentation: converted javadoc @ to LaTeX style \ in Doxygen code docs
2011-02-08 18:22:00 +00:00
eaef8d482b
STYLE: Updated 1991 start copyright year to 2004
2011-01-14 16:08:00 +00:00
099cc39e2e
Revert "STYLE: 2011 copyright date."
...
This reverts commit b18f6cc1ce
2011-01-05 18:24:29 +00:00
b18f6cc1ce
STYLE: 2011 copyright date.
2011-01-05 11:14:26 +00:00
ed67d5be34
STYLE: renamed IOFieldField to CompactIOField to be consistent with CompactIOList.
2010-10-01 17:33:07 +01:00
ebb9a9e1ac
ENH: tet decomposed particle tracking.
...
Squashed merge of particleInteractions up to
commit e7cb5bcf0315c359539ef1e715e1d51991343391
2010-09-17 16:59:17 +01:00
a2995ae0e5
ENH: decomposePar : allow -constant to override controlDict setting
2010-07-20 18:52:34 +01:00
b79a5d7172
Merge branch 'master' of ssh://graham@hunt//home/noisy3/OpenFOAM/OpenFOAM-dev
2010-06-02 12:04:28 +01:00
c51a2b0f63
ENH: have MUST_READ_IF_MODIFIED on IOdictionary construction
2010-06-02 09:48:07 +01:00
0531475578
ENH: IO Improvements, seg fault in parallel needing found.
2010-05-28 16:12:54 +01:00
0f7a124152
ENH. Adding more IOFieldFields, using them in decomposePar and
...
reconstructPar to decompose and reconstruct lagrangian FieldField
data.
2010-05-27 19:10:55 +01:00
f84a91d7ce
Merge commit 'origin/master' into splitCyclic
...
Conflicts:
applications/utilities/mesh/manipulation/createBaffles/createBaffles.C
applications/utilities/postProcessing/patch/patchIntegrate/patchIntegrate.C
src/OpenFOAM/meshes/pointMesh/pointPatches/constraint/cyclic/cyclicPointPatch.C
src/OpenFOAM/meshes/pointMesh/pointPatches/constraint/processor/processorPointPatch.C
src/dynamicMesh/motionSmoother/motionSmoother.C
src/dynamicMesh/motionSmoother/motionSmoother.H
src/dynamicMesh/motionSmoother/motionSmootherTemplates.C
2010-05-18 13:28:21 +01:00
7f6740a9eb
Merge commit 'origin/master' into splitCyclic
2010-04-30 15:10:10 +01:00
147fa2a75d
STYLE: add notes to some (most) command-line options
...
- mapFields and splitMeshRegions need more clarification
2010-04-27 10:50:15 +02:00
5cfa97624e
STYLE: more consistent New methods, use unregistered IOobject where appropriate
2010-04-20 17:13:35 +02:00
cff2580336
Merge branch 'master' into splitCyclic
...
Conflicts:
applications/utilities/mesh/manipulation/splitMeshRegions/splitMeshRegions.C
applications/utilities/parallelProcessing/decomposePar/domainDecompositionMesh.C
src/OpenFOAM/db/IOstreams/Pstreams/UPstream.H
src/OpenFOAM/fields/pointPatchFields/pointPatchField/pointPatchField.C
src/OpenFOAM/matrices/lduMatrix/solvers/GAMG/interfaces/cyclicGAMGInterface/cyclicGAMGInterface.C
src/OpenFOAM/meshes/pointMesh/pointPatches/constraint/processor/processorPointPatch.H
src/OpenFOAM/meshes/polyMesh/polyPatches/constraint/cyclic/cyclicPolyPatch.H
src/OpenFOAM/meshes/polyMesh/syncTools/syncTools.C
src/OpenFOAM/meshes/polyMesh/syncTools/syncToolsTemplates.C
src/meshTools/sets/topoSets/faceSet.C
src/parallel/decompose/decompositionMethods/decompositionMethod/decompositionMethod.C
2010-04-16 12:09:34 +01:00
d29c438657
STYLE: use url for FSF license instead of postal address, switch to GPL v3
2010-03-29 14:07:56 +02:00
c521e80c9f
ENH: Added missing surfaceField types (surfaceVectorField, surfaceTensorField etc)
2010-03-26 13:38:55 +00:00
49fb39e8f3
Merge commit 'origin/master' into splitCyclic
...
Conflicts:
applications/utilities/parallelProcessing/decomposePar/decomposePar.C
applications/utilities/parallelProcessing/decomposePar/domainDecomposition.C
applications/utilities/parallelProcessing/decomposePar/domainDecomposition.H
applications/utilities/parallelProcessing/decomposePar/domainDecompositionMesh.C
src/OpenFOAM/fields/pointPatchFields/constraint/processor/processorPointPatchField.C
src/OpenFOAM/fields/pointPatchFields/pointPatchField/pointPatchField.C
src/OpenFOAM/meshes/pointMesh/pointPatches/derived/coupled/coupledFacePointPatch.H
src/OpenFOAM/meshes/polyMesh/globalMeshData/globalPoints.C
src/OpenFOAM/meshes/polyMesh/polyPatches/basic/coupled/coupledPolyPatch.C
src/OpenFOAM/meshes/polyMesh/polyPatches/basic/coupled/coupledPolyPatch.H
src/OpenFOAM/meshes/polyMesh/polyPatches/constraint/processor/processorPolyPatch.C
2010-03-09 21:28:53 +00:00
5ece14ec6f
BUG: finite volume did not work before.
2010-03-03 10:12:35 +00:00
e49e95a53b
Merge branch 'olesenm'
2010-02-17 16:48:44 +00:00
62637d8471
ENH: initial overhaul of volPointInterpolation.
...
- removed globalPointPatch*
- removed pointPatchInterpolate*
since all is now inside volPointInterpolation.
2010-02-17 14:01:44 +00:00
ee293cde8e
ENH: add usage information for '-overwrite' option.
...
- make centrally available via #include "addOverwriteOption.H"
2010-02-16 11:44:27 +01:00
d7d97f1f36
ENH: Removed the -filterPatches option.
...
Option was not used anymore. Cleans up the code a bit.
2010-02-05 10:32:47 +00:00
46ad2e55d6
Merge branch 'master' into splitCyclic
...
Conflicts:
applications/utilities/parallelProcessing/decomposePar/domainDecomposition.C
applications/utilities/parallelProcessing/decomposePar/domainDecomposition.H
applications/utilities/parallelProcessing/decomposePar/domainDecompositionMesh.C
src/OpenFOAM/algorithms/MeshWave/FaceCellWave.C
src/OpenFOAM/matrices/lduMatrix/lduAddressing/lduInterfaceFields/cyclicLduInterfaceField/cyclicLduInterfaceField.C
src/OpenFOAM/meshes/polyMesh/globalMeshData/globalMeshData.C
src/OpenFOAM/meshes/polyMesh/globalMeshData/globalMeshData.H
src/OpenFOAM/meshes/polyMesh/syncTools/dummyTransform.H
src/OpenFOAM/meshes/polyMesh/syncTools/syncTools.C
src/edgeMesh/edgeFormats/vtk/VTKedgeFormat.H
src/mesh/blockMesh/curvedEdges/spline.H
src/meshTools/PointEdgeWave/PointEdgeWave.C
src/meshTools/sets/topoSets/faceSet.C
2010-01-26 17:11:18 +00:00
0e33bf0bba
add some usage information to a few utilities
2009-12-04 10:20:15 +01:00
58b7e64185
Use argList::addOption, argList::addBoolOption (almost) everywhere
...
- ensure that the standard options (eg, from timeSelector) also have
some usage information
2009-12-03 13:32:12 +01:00
