- This reflects the pre-existing coding situation where const_cast was
used throughout to effect the same.
STYLE: fix private/protected access
- CodedField, codedMixedFvPatchField
- libs() singleton method for global library handling
- explicit handling of empty filename for dlLibraryTable open/close.
Largely worked before, but now be more explicit about its behaviour.
- add (key, dict) constructor and open() methods.
More similarity to dimensionedType, Enum etc, and there is no
ambiguity with the templated open().
- construct or open from initializer_list of names
- optional verbosity when opening with auxiliary table,
avoid duplicate messages or spurious messages for these.
- basename and fullname methods (migrated from dynamicCode).
- centralise low-level load/unload hooks
- adjust close to also dlclose() aliased library names.
- reduces some dictionary clutter and probably looks less confusing
than having an ending that may not correspond to the current OS.
Eg, "fvOptions" instead of "libfvOptions.so", "libfvOptions.dylib" ...
- convenience dlOpen method for multiple files
- for codedFunctionObject and CodedSource the main code snippets
were not included in the SHA1 calculation, which meant that many
changes would not be noticed and no new library would be compiled.
As a workaround, a dummy 'code' entry could be used solely for the
purposes of generating a SHA1, but this is easily forgotten.
We now allow tracking of the dynamicCodeContext for the coded
objects and append to the SHA1 hasher with specific entries.
This should solve the previous misbehaviour.
We additionally add information about the ordering of the code
sections. Suppose we have a coded function object (all code
segments are optional) with the following:
codeExecute "";
codeWrite #{ Info<< "Called\n"; #};
which we subsequently change to this:
codeExecute #{ Info<< "Called\n"; #};
codeWrite "";
If the code strings are simply concatenated together, the SHA1 hashes
will be identical. We thus 'salt' with their semantic locations,
choosing tags that are unlikely to occur within the code strings
themselves.
- simplify the coded templates with constexpr for the SHA1sum
information.
- Correct the CodedSource to use 'codeConstrain' instead of
'codeSetValue' for consistency with the underlying functions.
- this is identical to either of these solutions:
* getEnv("FOAM_CASE")
* stringOps::expand("<case>")
but with a closer resemblance to argList or Time globalPath(),
which makes the intent clearer.
Avoids using raw strings in the caller, which improves compile-time checks.
Used in situations where a class has no derivation path or other
access to a time registry or command args.
- Use the OPENFOAM define (eg, 1806, 1812), which normally corresponds
to a major release, to define an API level. This remains consistent
within a release cycle and means that it is possible to manage
several sub-versions and continue to have a consistent lookup.
The current API value is updated automatically during the build
and cached as meta data for later use, even when the wmake/ directory
is missing or OpenFOAM has not yet be initialized.
The version information reported on program start or with -help
usage adjusted to reflect this. The build tag from git now also
carries the date as being more meaningful to trace than a hash
value.
- Update etc/bashrc and etc/cshrc to obtain the project directory
directly instead of via its prefix directory. The value obtained
corresponds to an absolute path, from which the prefix directory
can be obtained.
The combination of these changes removes the reliance on any
particular directory naming convention.
For example,
With an 1812 version (API level):
WM_PROJECT_VERSION=myVersion
installed as /some/path/somewhere/openfoam-mySandbox
This makes the -prefix, -foamInstall, -projectVersion, -version
values of foamEtcFiles, and similar entries for foamConfigurePaths
superfluous.
WM_PROJECT_INST_DIR is no longer required or used
ENH: improve handling and discovery of ThirdParty
- improve the flexibility and reusability of ThirdParty packs to cover
various standard use cases:
1. Unpacking initial release tar files with two parallel directories
- OpenFOAM-v1812/
- ThirdParty-v1812/
2. With an adjusted OpenFOAM directory name, for whatever reason
- OpenFOAM-v1812-myCustom/
- openfoam-1812-other-info/
3. Operating with/without ThirdParty directory
To handle these use cases, the following discovery is used.
Note PROJECT = the OpenFOAM directory `$WM_PROJECT_DIR`
PREFIX = the parent directory
VERSION = `$WM_PROJECT_VERSION`
API = `$WM_PROJECT_API`, as per `foamEtcFiles -show-api`
0. PROJECT/ThirdParty
- for single-directory installations
1. PREFIX/ThirdParty-VERSION
- this corresponds to the traditional approach
2. PREFIX/ThirdParty-vAPI
- allows for an updated value of VERSION (eg, v1812-myCustom)
without requiring a renamed ThirdParty. The API value
would still be '1812' and the original ThirdParty-v1812/
would be found.
3. PREFIX/ThirdParty-API
- this is the same as the previous example, but using an unadorned
API value. This also makes sense if the chosen version name also
uses the unadorned API value in its naming
(eg, 1812-patch190131, 1812.19W03)
4. PREFIX/ThirdParty-common
- permits maximum reuse for various versions, but only for
experienced user who are aware of potential version
incompatibilities
Directory existence is checked as is the presence of an Allwmake file
or a platforms/ directory. This reduces the potential of false positive
matches and limits the selection to directories that are either
with sources (has the Allwmake file), or pre-compiled binaries (has
the platforms/ directory).
If none of the explored directories are found to be suitable,
it reverts to using a PROJECT/ThirdParty dummy location since
this is within the project source tree and can be trusted to
have no negative side-effects.
ENH: add csh support to foamConfigurePaths
- this removes the previously experienced inconsistence in config file
contents.
REMOVED: foamExec
- was previously used when switching versions and before the
bashrc/cshrc discovery logic was added. It is now obsolete.
- Within strings it is preferable to use the "<etc>" instead.
Most use cases for the old "~OpenFOAM" expansion have been obsoleted
by the #includeEtc directive.
- use keyType::option enum to consolidate searching options.
These enumeration names should be more intuitive to use
and improve code readability.
Eg, lookupEntry(key, keyType::REGEX);
vs lookupEntry(key, false, true);
or
Eg, lookupEntry(key, keyType::LITERAL_RECURSIVE);
vs lookupEntry(key, true, false);
- new findEntry(), findDict(), findScoped() methods with consolidated
search options for shorter naming and access names more closely
aligned with other components. Behave simliarly to the
methods lookupEntryPtr(), subDictPtr(), lookupScopedEntryPtr(),
respectively. Default search parameters consistent with lookupEntry().
Eg, const entry* e = dict.findEntry(key);
vs const entry* e = dict.lookupEntryPtr(key, false, true);
- added '*' and '->' dereference operators to dictionary searchers.
- add additional control via a Foam::infoDetailLevel flag, which is
supported by a 'DetailLevel' macro. Eg,
DetailLevel << "some information" << nl
- When infoDetailLevel is zero, the stdout for all Foam::system() calls
are also redirected to stderr to prevent child output from
appearing on the parent.
- close stdin before exec in system call.
- a partial selection from https://github.com/mrklein/openfoam-os-x
with adjustments. The primary purpose is to reduce header-level
incompatibilities and to provide a common set of make rules to allow
easier patching (or re-integration).
- the purpose is more explicit, without needing to check documentation
about what the bool parameter means.
STYLE: improve formatting of fileName documentation
The normal library system() command uses 'fork', which causes
problems on IB+OPENMPI.
STYLE: add Foam:: qualifier to system calls to make them easier to spot.
with the more general and flexible 'postProcess' utility and '-postProcess' solver option
Rationale
---------
Both the 'postProcess' utility and '-postProcess' solver option use the
same extensive set of functionObjects available for data-processing
during the run avoiding the substantial code duplication necessary for
the 'foamCalc' and 'postCalc' utilities and simplifying maintenance.
Additionally consistency is guaranteed between solver data processing
and post-processing.
The functionObjects have been substantially re-written and generalized
to simplify development and encourage contribution.
Configuration
-------------
An extensive set of simple functionObject configuration files are
provided in
OpenFOAM-dev/etc/caseDicts/postProcessing
and more will be added in the future. These can either be copied into
'<case>/system' directory and included into the 'controlDict.functions'
sub-dictionary or included directly from 'etc/caseDicts/postProcessing'
using the '#includeEtc' directive or the new and more convenient
'#includeFunc' directive which searches the
'<etc>/caseDicts/postProcessing' directories for the selected
functionObject, e.g.
functions
{
#includeFunc Q
#includeFunc Lambda2
}
'#includeFunc' first searches the '<case>/system' directory in case
there is a local configuration.
Description of #includeFunc
---------------------------
Specify a functionObject dictionary file to include, expects the
functionObject name to follow (without quotes).
Search for functionObject dictionary file in
user/group/shipped directories.
The search scheme allows for version-specific and
version-independent files using the following hierarchy:
- \b user settings:
- ~/.OpenFOAM/\<VERSION\>/caseDicts/postProcessing
- ~/.OpenFOAM/caseDicts/postProcessing
- \b group (site) settings (when $WM_PROJECT_SITE is set):
- $WM_PROJECT_SITE/\<VERSION\>/caseDicts/postProcessing
- $WM_PROJECT_SITE/caseDicts/postProcessing
- \b group (site) settings (when $WM_PROJECT_SITE is not set):
- $WM_PROJECT_INST_DIR/site/\<VERSION\>/caseDicts/postProcessing
- $WM_PROJECT_INST_DIR/site/caseDicts/postProcessing
- \b other (shipped) settings:
- $WM_PROJECT_DIR/etc/caseDicts/postProcessing
An example of the \c \#includeFunc directive:
\verbatim
#includeFunc <funcName>
\endverbatim
postProcess
-----------
The 'postProcess' utility and '-postProcess' solver option provide the
same set of controls to execute functionObjects after the run either by
reading a specified set of fields to process in the case of
'postProcess' or by reading all fields and models required to start the
run in the case of '-postProcess' for each selected time:
postProcess -help
Usage: postProcess [OPTIONS]
options:
-case <dir> specify alternate case directory, default is the cwd
-constant include the 'constant/' dir in the times list
-dict <file> read control dictionary from specified location
-field <name> specify the name of the field to be processed, e.g. U
-fields <list> specify a list of fields to be processed, e.g. '(U T p)' -
regular expressions not currently supported
-func <name> specify the name of the functionObject to execute, e.g. Q
-funcs <list> specify the names of the functionObjects to execute, e.g.
'(Q div(U))'
-latestTime select the latest time
-newTimes select the new times
-noFunctionObjects
do not execute functionObjects
-noZero exclude the '0/' dir from the times list, has precedence
over the -withZero option
-parallel run in parallel
-region <name> specify alternative mesh region
-roots <(dir1 .. dirN)>
slave root directories for distributed running
-time <ranges> comma-separated time ranges - eg, ':10,20,40:70,1000:'
-srcDoc display source code in browser
-doc display application documentation in browser
-help print the usage
pimpleFoam -postProcess -help
Usage: pimpleFoam [OPTIONS]
options:
-case <dir> specify alternate case directory, default is the cwd
-constant include the 'constant/' dir in the times list
-dict <file> read control dictionary from specified location
-field <name> specify the name of the field to be processed, e.g. U
-fields <list> specify a list of fields to be processed, e.g. '(U T p)' -
regular expressions not currently supported
-func <name> specify the name of the functionObject to execute, e.g. Q
-funcs <list> specify the names of the functionObjects to execute, e.g.
'(Q div(U))'
-latestTime select the latest time
-newTimes select the new times
-noFunctionObjects
do not execute functionObjects
-noZero exclude the '0/' dir from the times list, has precedence
over the -withZero option
-parallel run in parallel
-postProcess Execute functionObjects only
-region <name> specify alternative mesh region
-roots <(dir1 .. dirN)>
slave root directories for distributed running
-time <ranges> comma-separated time ranges - eg, ':10,20,40:70,1000:'
-srcDoc display source code in browser
-doc display application documentation in browser
-help print the usage
The functionObjects to execute may be specified on the command-line
using the '-func' option for a single functionObject or '-funcs' for a
list, e.g.
postProcess -func Q
postProcess -funcs '(div(U) div(phi))'
In the case of 'Q' the default field to process is 'U' which is
specified in and read from the configuration file but this may be
overridden thus:
postProcess -func 'Q(Ua)'
as is done in the example above to calculate the two forms of the divergence of
the velocity field. Additional fields which the functionObjects may depend on
can be specified using the '-field' or '-fields' options.
The 'postProcess' utility can only be used to execute functionObjects which
process fields present in the time directories. However, functionObjects which
depend on fields obtained from models, e.g. properties derived from turbulence
models can be executed using the '-postProcess' of the appropriate solver, e.g.
pisoFoam -postProcess -func PecletNo
or
sonicFoam -postProcess -func MachNo
In this case all required fields will have already been read so the '-field' or
'-fields' options are not be needed.
Henry G. Weller
CFD Direct Ltd.
codedFunctionObject: Added the "codeWrite" entry
for the "write" function for consistency.
The previous method of using the "code" entry for the "write"
function was inconsistent and very confusing.
Problems remain with codedFixedValueFvPatchScalarField:
- readIfModified() notices change on system/codeDict, but the
codeProperties::setUnmodified() means that only a single entry will
get processed
- it appears that while dlclose() may (or may not) be actually closing
the library, there are probably still references about. This means
that a subsequent reloading still points to the original functions
and the lookup is not updated correctly.
