Until C++ supports 'concepts' the only way to support construction from
two iterators is to provide a constructor of the form:
template<class InputIterator>
List(InputIterator first, InputIterator last);
which for some types conflicts with
//- Construct with given size and value for all elements
List(const label, const T&);
e.g. to construct a list of 5 scalars initialized to 0:
List<scalar> sl(5, 0);
causes a conflict because the initialization type is 'int' rather than
'scalar'. This conflict may be resolved by specifying the type of the
initialization value:
List<scalar> sl(5, scalar(0));
The new initializer list contructor provides a convenient and efficient alternative
to using 'IStringStream' to provide an initial list of values:
List<vector> list4(IStringStream("((0 1 2) (3 4 5) (6 7 8))")());
or
List<vector> list4
{
vector(0, 1, 2),
vector(3, 4, 5),
vector(6, 7, 8)
};
- the checking for point-connected multiple-regions now also writes the
conflicting points to a pointSet
- with the -writeSets option it now also reconstructs & writes pointSets
Provides efficient integration of complex laminar reaction chemistry,
combining the advantages of automatic dynamic specie and reaction
reduction with ISAT (in situ adaptive tabulation). The advantages grow
as the complexity of the chemistry increases.
References:
Contino, F., Jeanmart, H., Lucchini, T., & D’Errico, G. (2011).
Coupling of in situ adaptive tabulation and dynamic adaptive chemistry:
An effective method for solving combustion in engine simulations.
Proceedings of the Combustion Institute, 33(2), 3057-3064.
Contino, F., Lucchini, T., D'Errico, G., Duynslaegher, C.,
Dias, V., & Jeanmart, H. (2012).
Simulations of advanced combustion modes using detailed chemistry
combined with tabulation and mechanism reduction techniques.
SAE International Journal of Engines,
5(2012-01-0145), 185-196.
Contino, F., Foucher, F., Dagaut, P., Lucchini, T., D’Errico, G., &
Mounaïm-Rousselle, C. (2013).
Experimental and numerical analysis of nitric oxide effect on the
ignition of iso-octane in a single cylinder HCCI engine.
Combustion and Flame, 160(8), 1476-1483.
Contino, F., Masurier, J. B., Foucher, F., Lucchini, T., D’Errico, G., &
Dagaut, P. (2014).
CFD simulations using the TDAC method to model iso-octane combustion
for a large range of ozone seeding and temperature conditions
in a single cylinder HCCI engine.
Fuel, 137, 179-184.
Two tutorial cases are currently provided:
+ tutorials/combustion/chemFoam/ic8h18_TDAC
+ tutorials/combustion/reactingFoam/laminar/counterFlowFlame2D_GRI_TDAC
the first of which clearly demonstrates the advantage of dynamic
adaptive chemistry providing ~10x speedup,
the second demonstrates ISAT on the modest complex GRI mechanisms for
methane combustion, providing a speedup of ~4x.
More tutorials demonstrating TDAC on more complex mechanisms and cases
will be provided soon in addition to documentation for the operation and
settings of TDAC. Also further updates to the TDAC code to improve
consistency and integration with the rest of OpenFOAM and further
optimize operation can be expected.
Original code providing all algorithms for chemistry reduction and
tabulation contributed by Francesco Contino, Tommaso Lucchini, Gianluca
D’Errico, Hervé Jeanmart, Nicolas Bourgeois and Stéphane Backaert.
Implementation updated, optimized and integrated into OpenFOAM-dev by
Henry G. Weller, CFD Direct Ltd with the help of Francesco Contino.
Contributed by Alberto Passalacqua, Iowa State University
Foam::dragModels::Beetstra
Drag model of Beetstra et al. for monodisperse gas-particle flows obtained
with direct numerical simulations with the Lattice-Boltzmann method and
accounting for the effect of particle ensembles.
Reference:
\verbatim
Beetstra, R., van der Hoef, M. A., & Kuipers, J. a. M. (2007).
Drag force of intermediate Reynolds number flow past mono- and
bidisperse arrays of spheres.
AIChE Journal, 53(2), 489–501.
\endverbatim
Foam::dragModels::Tenneti
Drag model of Tenneti et al. for monodisperse gas-particle flows obtained
with particle-resolved direct numerical simulations and accounting for the
effect of particle ensembles.
Reference:
\verbatim
Tenneti, S., Garg, R., & Subramaniam, S. (2011).
Drag law for monodisperse gas–solid systems using particle-resolved
direct numerical simulation of flow past fixed assemblies of spheres.
International Journal of Multiphase Flow, 37(9), 1072–1092.
\verbatim
- patchFields now get mapped (instead of created)
- with -consistent it now maps all patches except for processor ones (they are
the only ones that are processor-local)
- all constraint patches get evaluated after mapping to bring them up to date.
Patch contributed by Mattijs Janssens
Added the option '-subDict' to specify a sub-dictionary if multiple
replacement sets are present in the same file. This also provides
backward compatibility by setting '-subDict dictionaryReplacement'
Usage: foamList [OPTIONS]
options:
-case <dir> specify alternate case directory, default is the cwd
-compressibleTurbulenceModels
List compressible turbulenceModels
-functionObjects List functionObjects
-fvOptions List fvOptions
-incompressibleTurbulenceModels
List incompressible turbulenceModels
-noFunctionObjects
do not execute functionObjects
-registeredSwitches
List switches registered for run-time modification
-scalarBCs List scalar field boundary conditions (fvPatchField<scalar>)
-switches List switches declared in libraries but not set in
etc/controlDict
-unset List switches declared in libraries but not set in
etc/controlDict
-vectorBCs List vector field boundary conditions (fvPatchField<vector>)
-srcDoc display source code in browser
-doc display application documentation in browser
-help print the usage
Usage: foamList [OPTIONS]
options:
-case <dir> specify alternate case directory, default is the cwd
-compressibleTurbulenceModels
List compressible turbulenceModels
-functionObjects List functionObjects
-fvOptions List fvOptions
-incompressibleTurbulenceModels
List incompressible turbulenceModels
-noFunctionObjects
do not execute functionObjects
-registeredSwitches
List switches registered for run-time modification
-switches List switches declared in libraries but not set in
etc/controlDict
-unset List switches declared in libraries but not set in
etc/controlDict
-srcDoc display source code in browser
-doc display application documentation in browser
-help print the usage
