Calculates thrust, drag, torque and lift/drag/pressure coefficients
of single or multiple blades (eg, propeller, turbine blades)
This function object differs from the propellerInfo and forces
function objects in that all forces are calculated within the local
cylindrical coordinate system, which yields thrust and drag values
within the expected reference frame.
The output comprises:
- coefficients per radial bin
- area-weighted total coefficients
- integrated forces and torque
For convenient post-processing, the results are also written in a VTK
(.vtp) output format. All surface results are registered internally,
which makes them available for other function objects.
- use functionObject writeInterval not timeInterval.
No change in behaviour since the missing writeInterval is treated
as '1' anyhow when using 'timeStep' for the writeControl
- consistent use of 'adjustable' vs 'adjustableRunTime'
- prefer '#eval{ vector(...) }' to calling '#eval' multiple times
Activated using the [optional] 'shielding' keyword having the options:
- standard: [default] same as v2406 and earlier
- ZDES2020: new option based on the reference:
Deck, S., Renard, N. (2020).
Towards an enhanced protection of attached boundary layers in hybrid
RANS/LES methods.
Journal of Computational Physics, 400, 108970.
DOI:10.1016/j.jcp.2019.108970
Contribution from Marian Fuchs at UpstreamCFD GmbH
Integrated by Andrew Heather OpenCFD Ltd.
- 1_Inlet_2_Outlet/porosityBased/R_10x-init/reEval: showcases the
initialization of the design variables using topoSet and setFields
- 3DBox/losses-mass-uniformity-SQP-extraVars: showcases the use of the
so-called 'extra variables' in the QP problem which relax it,
allowing its solution even if there is no feasible one
- the timeSelector is often used to select single or multiple times
(eg, for post-processing). However, there are a few applications
where only a *single* time should be selected and set.
These are now covered by this type of use:
timeSelector::addOptions_singleTime(); // Single-time options
...
// Allow override of time from specified time options, or no-op
timeSelector::setTimeIfPresent(runTime, args);
In some cases, if can be desirable to force starting from the
initial Time=0 when no time options have been specified:
// Set time from specified time options, or force start from Time=0
timeSelector::setTimeIfPresent(runTime, args, true);
These changes make a number of includes redundant:
* addTimeOptions.H
* checkConstantOption.H
* checkTimeOption.H
* checkTimeOptions.H
* checkTimeOptionsNoConstant.H
ENH: add time handling to setFields, setAlphaField (#3143)
Co-authored-by: Johan Roenby <>
STYLE: replace instant("constant") with instant(0, "constant")
- avoids relying on atof parse behaviour returning zero
- shape optimisation: SQP failed due to wrong divScheme for the adjoint
equations
- shape optimisation: tutorials designed to show the impact of different flow
conditions were actually using the same U
- topology optimisation: tutorials designed to show the impact of the
flow rate distribution were actually using the same target
fractions
- topology optimisation: updated old fvSolution syntax
Most cases now rely on the nullSpace update method, instead of MMA,
since it has proven more reliable.
Also, added some constrained optimisation cases, including constraints
on the flow rate partition and total pressure losses as well as cases
targeting uniformity as the objective function.
Added a 3D topology optimisation case which also includes constraints.
A 1-Inlet-2-Outlet geometry is showcased for laminar and turbulent
flows, set-up with different variants of porosity-based and
level-set-based topology optimisation
Parts of the adjoint optimisation library were re-designed to generalise
the way sensitivity derivatives (SDs) are computed and to allow easier
extension to primal problems other than the ones governed by
incompressible flows. In specific:
- the adjoint solver now holds virtual functions returning the part of
SDs that depends only on the primal and the adjoint fields.
- a new class named designVariables was introduced which, apart from
defining the design variables of the optimisation problem and
providing hooks for updating them in an optimisation loop, provides
the part of the SDs that affects directly the flow residuals (e.g.
geometric variations in shape optimisation, derivatives of source
terms in topology optimisation, etc). The final assembly of the SDs
happens here, with the updated sensitivity class acting as an
intermediate.
With the new structure, when the primal problem changes (for instance,
passive scalars are included), the same design variables and sensitivity
classes can be re-used for all physics, with additional contributions to
the SDs being limited (and contained) to the new adjoint solver to be
implemented. The old code structure would require new SD classes for
each additional primal problem.
As a side-effect, setting up a case has arguably become a bit easier and
more intuitive.
Additional changes include:
---------------------------
- Changes in the formulation and computation of shape sensitivity derivatives
using the E-SI approach. The latter is now derived directly from the
FI approach, with proper discretization for the terms and boundary
conditions that emerge from applying the Gauss divergence theorem used
to transition from FI to E-SI. When E-SI and FI are based on the same
Laplace grid displacement model, they are now numerically equivalent
(the previous formulation proved the theoretical equivalence of the
two approaches but numerical results could differ, depending on the
case).
- Sensitivity maps at faces are now computed based (and are deriving
from) sensitivity maps at points, with a constistent point-to-face
interpolation (requires the differentiation of volPointInterpolation).
- The objective class now allocates only the member pointers that
correspond to the non-zero derivatives of the objective w.r.t. the
flow and geometric quantities, leading to a reduced memory footprint.
Additionally, contributions from volume-based objectives to the
adjoint equations have been re-worked, removing the need for
objectiveManager to be virtual.
- In constrained optimisation, an adjoint solver needs to be present for
each constraint function. For geometric constraints though, no adjoint
equations need to solved. This is now accounted for through the null
adjoint solver and the geometric objectives which do not allocate
adjoint fields for this kind of constraints, reducing memory
requirements and file clutter.
- Refactoring of the updateMethod to collaborate with the new
designVariables. Additionally, all updateMethods can now read and
write restart data in binary, facilitating exact continuation.
Furthermore, code shared by various quasi-Newton methods (BFGS, DBFGS,
LBFGS, SR1) has been organised in the namesake class. Over and above,
an SQP variant capable of tackling inequality constraints has been
added (ISQP, with I indicating that the QP problem in the presence of
inequality constraints is solved through an interior point method).
Inequality constraints can be one-sided (constraint < upper-value)
or double-sided (lower-value < constraint < upper-value).
- Bounds can now be defined for the design variables.
For volumetricBSplines in specific, these can be computed as the
mid-points of the control points and their neighbouring ones. This
usually leads to better-defined optimisation problems and reduces the
chances of an invalid mesh during optimisation.
- Convergence criteria can now be defined for the optimisation loop
which will stop if the relative objective function reduction over
the last objective value is lower than a given threshold and
constraints are satisfied within a give tolerance. If no criteria are
defined, the optimisation will run for the max. given number of cycles
provided in controlDict.
- Added a new grid displacement method based on the p-Laplacian
equation, which seems to outperform other PDE-based approaches.
TUT: updated the shape optimisation tutorials and added a new one
showcasing the use of double-sided constraints, ISQP, applying
no-overlapping constraints to volumetric B-Splines control points
and defining convergence criteria for the optimisation loop.
- the faMesh/fvMesh copy constructors were using the readOption from
the base-mesh schemes/solution instead of copying their contents.
This would not really affect fvMesh (since it has its own IOobject
for the constructor), but did affect faMesh. However, the problem
only shows up with collated + redistribute, since that is where
the ranks can be doing uncoordinated IO.
Only consider as a bug for recent develop since previous versions
had other problems with collated+redistribute with finite-area
anyhow.
- retain group information when copying zones
- support construct empty (add details later)
- improve consistency for zone and boundaryMesh construction
- support front/back/both selection for faceZoneToCell
STYLE: prefer faceZone patch() method instead of operator()
STYLE: use std::unique_ptr instead of manual pointer management
- for zones and core patch types.
Easier data management, allows default destructors (for example)
- update TimeState access methods
- use writeTime() instead of old method name outputTime()
- use deltaTValue() instead of deltaT().value()
to avoids pointless construct of intermediate
