ENH: extend rmDir to handle removal of empty directories only
- recursively remove directories that only contain other directories
but no other contents. Treats dead links as non-content.
- stem(), replace_name(), replace_ext(), remove_ext() etc
- string::contains() method - similar to C++23 method
Eg,
if (keyword.contains('/')) ...
vs
if (keyword.find('/') != std::string::npos) ...
- construct based on db and mesh information from an existing field
- check movable() instead of isTmp() when reusing fields
STYLE: isolate check for reuse GeometricField into Detail namespace
- code remnant from separate lookup + construct of coordinateSystem
(7b2bcfda0b).
Apply consistent use of coordinateSystem::NewIfPresent to avoid
these types of coding mishaps
- in continuation of #2565 (rotationCentre for surface output formats)
it is helpful to also support READ_IF_PRESENT behaviour for the
'origin' keyword.
This can be safely used wherever the coordinate system definition
is embedded within a sub-dictionary scope.
Eg,
dict1
{
coordinateSystem
{
origin (0 0 0); // now optional here
rotation ...;
}
}
but remains mandatory if constructed without a sub-dict:
dict2
{
origin (0 0 0); // still mandatory
e1 (1 0 0);
e3 (0 0 1);
}
With this change, the "transform" sub-dictionary can written
more naturally:
formatOptions
{
vtk
{
scale 1000; // m -> mm
transform
{
rotationCentre (1 0 0);
rotation axisAngle;
axis (0 0 1);
angle -45;
}
}
}
ENH: simplify handling of "coordinateSystem" dictionary lookups
- coordinateSystems::NewIfPresent method for optional entries:
coordSysPtr_ = coordinateSystem::NewIfPresent(mesh, dict);
Instead of
if (dict.found(coordinateSystem::typeName, keyType::LITERAL))
{
coordSysPtr_ =
coordinateSystem::New
(
mesh_,
dict,
coordinateSystem::typeName
);
}
else
{
coordSysPtr_.reset();
}
ENH: more consistent handling of priorities for binModels, forces (#2598)
- if the dictionaries are overspecified, give a 'coordinateSystem'
entry a higher prioriy than the 'CofR' shortcuts.
Was previously slightly inconsistent between the different models.
- previously had 'mandatory' (bool) for advanced control of reading
dictionary entries but its meaning was unclear in the calling code
without extra code comments.
Now use IOobjectOption::readOption instead, which allows further
options (ie, NO_READ) and is more transparent as to its purpose in
the code than a true/false bool flag was.
This is a minor breaking change (infrequent, advanced usage only)
- minor code cleanup in dictionary lookup methods
- with IOstreamOption there are no cases where we need to construct
top-level streams (eg, IFstream, OFstream) with additional information
about the internal IOstream 'version' (eg, version: 2.0).
Makes it more convenient to open files with a specified
format/compression combination - no clutter of specifying the
version
- avoids redundant dictionary searching
STYLE: remove dictionary lookupOrDefaultCompat wrapper
- deprecated and replaced by getOrDefaultCompat (2019-05).
The function is usually specific to internal keyword upgrading
(version compatibility) and unlikely to exist in any user code.
- read construct from dictionary.
Calling syntax similar to dimensionedType, dimensionedSet,...
Replaces the older getEntry(), getOptional() static methods
- support readIfPresent
- in expressions BCs in particular, there is various logic handling
for if value/refValue/refGradient etc are found or not.
Handle the lookups as findEntry and branch to use Field assign
or other handling, depending on its existence.
STYLE: use wordList instead of wordRes for copy/filter dictionary
- noexcept on some Time methods
ENH: pass through is_oriented() method for clearer coding
- use logical and/or/xor instead of bitwise versions (clearer intent)
Header information now includes, e.g.
f [Hz] vs P(f) [Pa]
Lower frequency: 2.500000e+01
Upper frequency: 5.000000e+03
Window model: Hanning
Window number: 2
Window samples: 512
Window overlap %: 5.000000e+01
dBRef : 2.000000e-05
Area average: false
Area sum : 6.475194e-04
Number of faces: 473
Note: output files now have .dat extension
- for example,
defaultFieldValues
(
areaScalarFieldValue h 0.00014
);
regions
(
clipPlaneToFace
{
point (0 0 0);
normal (1 0 0);
fieldValues
(
areaScalarFieldValue h 0.00015
);
}
);
ENH: additional clipPlaneTo{Cell,Face,Point} topo sets
- less cumbersome than defining a semi-infinite bounding box
- remedy by performing the attach() action sequentially (as per
stitchMesh changes). This ensures that the current point addressing
is always used and avoids references to the already-merged points
(which is what causes the failure).
ENH: improve handling of empty patch removal
- only remove empty *merged* patches, but leave any other empty
patches untouched since they may intentional placeholders for other
parts of a workflow.
- remove any empty point/face zones created for patch merging
- commonly used calculations
ENH: add faPatch::patchRawSlice method
- slices using the nEdges() instead of the virtual size(),
which provides similar functionality as finite-volume has with
its distinction between polyPatch vs fvPatch patchSlice
- use patchInternal for obtaining faPatch, fvPatch information
- similar to boundaryFieldRef(), primitiveFieldRef() for providing
write access. Complimentary naming to internalField(). Identical to
ref() but more explicitly named, and less likely to be confused with
a tmp::ref(), for example.
- prefer .primitiveFieldRef() over .ref().field()
- mark some access methods noexcept
- these were previously constructing from an fvPatch (for simpler
integration with regionFaModel) but this unnecessarily restricts
the finiteArea to a single volume patch.
- adjusted derived faOptions to support multiple patches
- list of faces() was using mesh-faces, not area-faces
ENH: provision for patch and faceSet selection in fa::faceSetOption
- adjust most of the faOptions to respect subset of faces
ENH: support Function1 for externalHeatFluxSource
BUG: incorrect handling of fixedPower (externalHeatFluxSource)
- used local areas instead of global total area
- old constructor interface allowed arbitrary strings to specify the
method enumeration. If actually used at runtime, they could/would
raise a FatalError (unknown enumeration).
Define a simpler default constructor instead.
- whichPolyPatches() = the polyPatches related to the areaMesh.
This helps when pre-calculating (and caching) any patch-specific
content.
- whichPatchFaces() = the poly-patch/patch-face for each of the faceLabels.
This allows more convenient lookups and, since the list is cached on
the area mesh, reduces the number of calls to whichPatch() etc.
- whichFace() = the area-face corresponding to the given mesh-face
ENH: more flexible/consistent volume->area mapper functions
- whichPatchFace() returns the (patchi, patchFacei) tuple,
whichPatch() simply wraps whichPatchFace()
- groupNames() : similar to zones
ENH: simplify calls to faPatch/fvPatch patchField, lookupPatchField
- make second (ununsed) template parameter optional.
Was previously needed for old compilers (2008 and earlier).
- simplifies construction/inheritance
ENH: add {fa,fv}PatchField::zeroGradientType() static
- can be used to avoid literal "zeroGradient" in places
STYLE: adjust naming of pointPatch runtime selection table
- simply use 'patch' as per fa/fv fields
STYLE: add zero-size guard to patch constraintType(const word&)
For example, instead of
if (dict.found("value"))
{
fvScalarField::operator=
(
Field<scalar>("value", dict, p.size())
);
}
can use more precise specifications, and also eliminate searching
the dictionary multiple times:
const auto* eptr = dict.findEntry("value", keyType::LITERAL);
//or: dict.findCompat("value", {{"oldName" ... }}, keyType::LITERAL);
if (eptr)
{
fvScalarField::assign(*eptr, p.size());
}
STYLE: combine declaration of FieldBase into Field.H
- include -no-libs option by default, similar to '-lib',
which makes it available to all solvers/utilities.
Add argList allowLibs() method to query it.
- relocate with/no functionObjects logic from Time to argList
itself as argList allowFunctionObjects()
- add libs/functionObjects override handling to decomposePar etc
ENH: report the stream relativeName for IOerrors (see c9333a5ac8)
