- both autoPtr and tmp are defined with an implicit construct from
nullptr (but with explicit construct from a pointer to null).
Thus is it safe to use 'nullptr' when returning an empty autoPtr or tmp.
- when constructing dimensioned fields that are to be zero-initialized,
it is preferrable to use a form such as
dimensionedScalar(dims, Zero)
dimensionedVector(dims, Zero)
rather than
dimensionedScalar("0", dims, 0)
dimensionedVector("zero", dims, vector::zero)
This reduces clutter and also avoids any suggestion that the name of
the dimensioned quantity has any influence on the field's name.
An even shorter version is possible. Eg,
dimensionedScalar(dims)
but reduces the clarity of meaning.
- NB: UniformDimensionedField is an exception to these style changes
since it does use the name of the dimensioned type (instead of the
regIOobject).
- improve internal handling to permit deriving resizable containers
(eg, PtrDynList).
- include '->' iterator dereferencing
- Only append/set non-const autoPtr references. This doesn't break
existing code, but makes the intention more transparent.
- in many cases can just use lookupOrDefault("key", bool) instead of
lookupOrDefault<bool> or lookupOrDefault<Switch> since reading a
bool from an Istream uses the Switch(Istream&) anyhow
STYLE: relocated Switch string names into file-local scope
- eliminate iterators from PackedList since they were unused, had
lower performance than direct access and added unneeded complexity.
- eliminate auto-vivify for the PackedList '[] operator.
The set() method provides any required auto-vivification and
removing this ability from the '[]' operator allows for a lower
when accessing the values. Replaced the previous cascade of iterators
with simpler reference class.
PackedBoolList:
- (temporarily) eliminate logic and addition operators since
these contained partially unclear semantics.
- the new test() method tests the value of a single bit position and
returns a bool without any ambiguity caused by the return type
(like the get() method), nor the const/non-const access (like
operator[] has). The name corresponds to what std::bitset uses.
- more consistent use of PackedBoolList test(), set(), unset() methods
for fewer operation and clearer code. Eg,
if (list.test(index)) ... | if (list[index]) ...
if (!list.test(index)) ... | if (list[index] == 0u) ...
list.set(index); | list[index] = 1u;
list.unset(index); | list[index] = 0u;
- deleted the operator=(const labelUList&) and replaced with a setMany()
method for more clarity about the intended operation and to avoid any
potential inadvertent behaviour.
This class is largely a pre-C++11 holdover. It is now possible to
simply use move construct/assignment directly.
In a few rare cases (eg, polyMesh::resetPrimitives) it has been
replaced by an autoPtr.
Improve alignment of its behaviour with std::unique_ptr
- element_type typedef
- release() method - identical to ptr() method
- get() method to get the pointer without checking and without releasing it.
- operator*() for dereferencing
Method name changes
- renamed rawPtr() to get()
- renamed rawRef() to ref(), removed unused const version.
Removed methods/operators
- assignment from a raw pointer was deleted (was rarely used).
Can be convenient, but uncontrolled and potentially unsafe.
Do allow assignment from a literal nullptr though, since this
can never leak (and also corresponds to the unique_ptr API).
Additional methods
- clone() method: forwards to the clone() method of the underlying
data object with argument forwarding.
- reset(autoPtr&&) as an alternative to operator=(autoPtr&&)
STYLE: avoid implicit conversion from autoPtr to object type in many places
- existing implementation has the following:
operator const T&() const { return operator*(); }
which means that the following code works:
autoPtr<mapPolyMesh> map = ...;
updateMesh(*map); // OK: explicit dereferencing
updateMesh(map()); // OK: explicit dereferencing
updateMesh(map); // OK: implicit dereferencing
for clarity it may preferable to avoid the implicit dereferencing
- prefer operator* to operator() when deferenced a return value
so it is clearer that a pointer is involve and not a function call
etc Eg, return *meshPtr_; vs. return meshPtr_();
- relocated HashSetPlusEqOp and HashTablePlusEqOp to
HashSetOps::plusEqOp and HashTableOps::plusEqOp, respectively
- additional functions for converting between a labelHashSet
and a PackedBoolList or List<bool>:
From lists selections to labelHashSet indices:
HashSetOps::used(const PackedBoolList&);
HashSetOps::used(const UList<bool>&);
From labelHashSet to list forms:
PackedBoolList bitset(const labelHashSet&);
List<bool> bools(const labelHashSet&);
- relocated ListAppendEqOp and ListUniqueEqOp to ListOps::appendEqOp
and ListOps::UniqueEqOp, respectively for better code isolation and
documentation of purpose.
- relocated setValues to ListOps::setValue() with many more
alternative selectors possible
- relocated createWithValues to ListOps::createWithValue
for better code isolation. The default initialization value is itself
now a default parameter, which allow for less typing.
Negative indices in the locations to set are now silently ignored,
which makes it possible to use an oldToNew mapping that includes
negative indices.
- additional ListOps::createWithValue taking a single position to set,
available both in copy assign and move assign versions.
Since a negative index is ignored, it is possible to combine with
the output of List::find() etc.
STYLE: changes for PackedList
- code simplication in the PackedList iterators, including dropping
the unused operator() on iterators, which is not available in plain
list versions either.
- improved sizing for PackedBoolList creation from a labelUList.
ENH: additional List constructors, for handling single element list.
- can assist in reducing constructor ambiguity, but can also helps
memory optimization when creating a single element list.
For example,
labelListList labels(one(), identity(mesh.nFaces()));
* For most cases, this conversion would be largely unintentional
and also less efficient. If the regex is desirable, the caller
should invoke it explicitly.
For example,
findStrings(regExp(str), listOfStrings);
Or use one of the keyType, wordRe, wordRes variants instead.
If string is to be used as a plain (non-regex) matcher,
this can be directly invoked
findMatchingStrings(str, listOfStrings);
or using the ListOps instead:
findIndices(listOfStrings, str);
* provide function interfaces for keyType.
- subsetList, inplaceSubsetList with optional inverted logic.
- use moveable elements where possible.
- allow optional starting offset for the identity global function.
Eg, 'identity(10, start)' vs 'identity(10) + start'
- Eg instead of using labelHashSet, used HashSet<label> which uses
the string::hash for hashing. Other places inadvertently using the
string::hash instead of Hash<label> for hashing.
STYLE: use Map<..> instead of HashTable<.., label, Hash<label>>
- reduces clutter
- add copy construct from UList
- remove copy construct from dissimilar types.
This templated constructor was too generous in what it accepted.
For the special cases where a copy constructor is required with
a change in the data type, now use the createList factory method,
which accepts a unary operator. Eg,
auto scalars = scalarList::createList
(
labels,
[](const label& val){ return 1.5*val; }
);
- this currently just strips off the leading parent directory name
"/this/path/and/subdirs/name"
relative("/this/path") -> "and/subdirs/name"
relative("/this") -> "path/and/subdirs/name"
- problems when the cloud was not available on all processors.
- NB: ensight measured data only allows a single cloud, but
foamToEnsight writes all clouds.
- The central InfoSwitch "writeLagrangianPositions" allows writing an
additional Lagrangian "positions" file, but these were not being
written by reconstructPar. These are now also written in reconstructPar
if the central writeLagrangianPositions InfoSwitch is enabled.
NOTES
- "positions" are reconstructed from the processors "coordinates" file
- decomposePar will not attempt to create or redistribute any
"positions" files
- use succincter method names that more closely resemble dictionary
and HashTable method names. This improves method name consistency
between classes and also requires less typing effort:
args.found(optName) vs. args.optionFound(optName)
args.readIfPresent(..) vs. args.optionReadIfPresent(..)
...
args.opt<scalar>(optName) vs. args.optionRead<scalar>(optName)
args.read<scalar>(index) vs. args.argRead<scalar>(index)
- the older method names forms have been retained for code compatibility,
but are now deprecated
