- adds topology-based segmentation of the surfaces generated with
distance surfaces. This can occur when the surface terminates
close to a thin wall gap in the mesh; resulting in a cuts that
extend into the next region.
The cutting algorithm does not normally distinguish between these
types of "ragged" cuts, and legitimate ones (eg, cutting multiple
pipes). The additional segmentation controls provide for two common
scenarios:
largestRegion (pre-filter):
- The cut cells are checked for topological connectivity and the
region with the most number of cut cells is retained.
This handles the "ragged" edge problem.
nearestPoints (pre-filter):
- The cut cells split into regions, the regions closest to the
user-defined points are retained.
Uses maxDistance for additional control.
proximity (post-filter):
- Checks the resulting faces against the original search surface
and rejects faces with a distance greater than absProximity.
ENH: restructure distance surface geometric filtering
- prefilter cells, which can be used to adjust the distance
calculation in the far field to the real distance
(not the normal distance).
This can also be used to artificially sharpen the transition
between near/far regions, if required in the future.
- generic isoSurfaceBase. Provides simpler cell-cut detection and
various functions that can be used for iso-surfaces or when
preparing prefiltered input for iso-surfaces.
- rudimentary runtime selection
ENH: isoSurface Cell/Topo uses the isoSurfaceBase infrastructure
- simpler cell cut detection, common routines
- ensure that tetMatcher is only called once per cell
ENH: use indirect patch during edge erosion
- lower overhead, allows backtracking (future) if needed
This adds a 'geometry' scheme section to the system/fvSchemes:
geometry
{
type highAspectRatio;
}
These 'fvGeometryMethod's are used to calculate
- deltaCoeffs
- nonOrthoCoeffs
etc and can even modify the basic face/cellCentres calculation.
Creates volume fields whose boundaries are used to store patch interaction
statistics.
Current field output per patch face:
- \<cloud\>\<model\>:count - cumulative particle hits
- \<cloud\>\<model\>:mass - cumuluative mass of hitting particles
Fields can be reset according to:
- none: fields are not reset
- timeStep: reset at each time step
- writeTime: reset at each write time
Usage
patchInteractionFields1
{
type patchInteractionFields;
resetMode writeTime;
}
Member function dKcdTbyKc in thermo.H is calculated from S and G at Pstd.
Thus dGdT was removed from the thermos.
- Add optional hRef, eRef and Tref as optional.
- Use new thermo to multiphase solver icoReactingMuliPhaseFoam
- Remove hRefConst and eRefConst thermos.
TUT: Updated tutorials
The generalizedNewtonian viscocity models were ported from
the org version and added to the laminar turbulence framework.
This allows use in compressible and incompressible solvers
through the turbulence dictionary under the laminar sub-dictionary.
The thermal laminar viscosity is taken from the thermo for solvers
that use thermo library or from the transportProperties dictionary
for incompressible solvers.
At the moment the option to include viscocity models through the
transportDict is still available.
The icoTabulated equation of state was ported from the org version.
STYLE: use 'model' instead of 'laminarModel' in tutorials
- New solver: `acousticFoam`
- New base finite-area region class: `regionFaModel`
- New base shell model classes:
- `vibrationShellModel`
- `thermalShellModel`
- New shell models:
- A vibration-shell model: `KirchhoffShell`
- A thermal-shell model: `thermalShell`
- New finite-area/finite-volume boundary conditions:
- `clampedPlate`
- `timeVaryingFixedValue`
- `acousticWaveTransmissive`
- New base classes for `fvOption` of finite-area methods: `faOption`
- New `faOption`s:
- `contactHeatFluxSource`
- `externalFileSource`
- `externalHeatFluxSource`
- `jouleHeatingSource`
- New tutorial: `compressible/acousticFoam/obliqueAirJet`
Signed-off-by: Kutalmis Bercin <kutalmis.bercin@esi-group.com>
- implicitly enabled when timeStampMaster (default) is used
for the fileModificationChecking
- When running with non-distributed roots (eg, NFS-share) read for
processor directories on master only and send to sub-processes
instead individual reads.
- If disabled (old default, or when running with distributed roots),
uses the regular fileHandler readDir, which may perform readDir
on each processor. Potentially slow startup times on large systems.
Improvements based on analysis from T.Aoyagi(RIST), A.Azami(RIST)
Applies sources on turbulent kinetic energy (i.e. `k`)
and either turbulent kinetic energy dissipation rate (i.e. `epsilon`)
or specific dissipation rate (i.e. `omega`) to incorporate effects
of buoyancy on turbulence in incompressible and compressible flows.
See buoyancyTurbSource.H for details.
- was previously via inheritance, but using member data instead
supports a more flexible internal switching of the storage. It also
ensures that data access remains safe, even in the absence of
an isoSurface.
- better alignment of sampling Cell/Point/Topo inputs
- make exposedPatchName optional for isoSurface, cuttingPlane. This
was a holdover requirement from an older version of fvMeshSubset
- yields cleaner surfaces with few cuts.
Can use isoMethod keyword to select cell/point/topo if they prove
better for any particular case.
CONFIG: change default cuttingPlane algorithm from 'cell' to 'topo'
- bundles selection and control parameters used when creating
iso-surfaces. This simplifies selection and specification
- drop old compatibility handling of "cell" as a bool
- harmonize filter/regularisation flags for iso-surface
- for dictionary input, accept "isoMethod" and "isoAlgorithm" as being
synonymous. Using "isoMethod" is less subject to typing errors.
- for boundary meshes, zones etc. The behaviour with an empty matcher
was either not properly documented, and looped through all
names just to establish there was no match.
STYLE: removed redundant typedefs for point fields
- robuster matching behaviour when encountering paths that themselves
contain the word "processor" in them. For example,
"/path/processor0generation2/case1/processor10/system"
will now correctly match on processor10 instead of failing.
- use procRangeType for encapsulating the processor ranges
- provision for information of distributed vs non-distributed roots.
The information is currently available from the initial setup, but
can useful to access directly within fileOperation.
STYLE: modernize list iteration
- the NullObject singleton can also be cast to a bitSet
(sufficient size and bit-pattern). Useful for places that
need to hold a reference on construction
