- findStrings, findMatchingStrings now mostly covered by matching
intrinsics in wordRe and wordRes.
Add static wordRes match() and matching() variants
COMP: remove stringListOps include from objectRegistry.H
- was already noted for removal (NOV-2018)
- functionality similar to that provided by foamToEnsight, foamToVTK
which allows blocking out patches (eg, outer walls, inlet/outlet)
that are not particularly interesting to visualize
- ensightWrite, vtkWrite, fv::cellSetOption
ENH: additional topoSet "ignore" action
- this no-op can be used to skip an action step, instead of removing
the entire entry
- in various situations with mesh regions it is also useful to
filter out or remove the defaultRegion name (ie, "region0").
Can now do that conveniently from the polyMesh itself or as a static
function. Simply use this
const word& regionDir = polyMesh::regionName(regionName);
OR mesh.regionName()
instead of
const word& regionDir =
(
regionName != polyMesh::defaultRegion
? regionName
: word::null
);
Additionally, since the string '/' join operator filters out empty
strings, the following will work correctly:
(polyMesh::regionName(regionName)/polyMesh::meshSubDir)
(mesh.regionName()/polyMesh::meshSubDir)
- relocate templating to factory method 'New'.
Adds provisions for more general re-use.
- expose processor topology in globalMesh as topology()
- wrap proc->patch lookup as processorTopology::procPatchLookup method
(failsafe). May consider using Map<label> for its storage in the
future.
- direct construct and reset method for creating a zero-sized (dummy)
subMesh. Has no exposed faces and no parallel synchronization
required.
- core mapping (interpolate) functionality with direct handling
of subsetting in fvMeshSubset (src/finiteVolume).
Does not use dynamicMesh topology changes
- two-step subsetting as fvMeshSubsetter (src/dynamicMesh).
Does use dynamicMesh topology changes.
This is apparently only needed by the subsetMesh application itself.
DEFEATURE: remove deprecated setLargeCellSubset() method
- was deprecated JUL-2018, now removed (see issue #951)
- also disables PointData if manifold cells are detected.
This is a partial workaround for volPointInterpolation problems
with handling manifold cells.
Step 1.
include "addAllRegionOptions.H"
Adds the -allRegions, -regions and -region options to argList.
Step 2.
include "getAllRegionOptions.H"
Processes the options with -allRegions selecting everything
from the regionProperties.
OR use -regions to specify multiple regions (from
regionProperties), and can also contain regular expressions
OR use the -region option
Specifying a single -regions NAME (not a regular expresssion)
is the same as -region NAME and doesn't use regionProperties
Creates a `wordList regionNames`
Step 3.
Do something with the region names.
Either directly, or quite commonly with the following
include "createNamedMeshes.H"
Creates a `PtrList<fvMesh> meshes`
STYLE: add description to some central include files
- wrap command-line retrieval of fileName with an implicit validate.
Instead of this:
fileName input(args[1]);
fileName other(args["someopt"]);
Now use this:
auto input = args.get<fileName>(1);
auto other = args.get<fileName>("someopt");
which adds a fileName::validate on the inputs
Because of how it is implemented, it will automatically also apply
to argList getOrDefault<fileName>, readIfPresent<fileName> etc.
- adjust fileName::validate and clean to handle backslash conversion.
This makes it easier to ensure that path names arising from MS-Windows
are consistently handled internally.
- dictionarySearch: now check for initial '/' directly instead of
relying on fileName isAbsolute(), which now does more things
BREAKING: remove fileName::clean() const method
- relying on const/non-const to control the behaviour (inplace change
or return a copy) is too fragile and the const version was
almost never used.
Replace:
fileName sanitized = constPath.clean();
With:
fileName sanitized(constPath);
sanitized.clean());
STYLE: test empty() instead of comparing with fileName::null
- with '&&' conditions, often better to check for non-null autoPtr
first (it is cheap)
- check as bool instead of valid() method for cleaner code, especially
when the wrapped item itself has a valid/empty or good.
Also when handling multiple checks.
Now
if (ptr && ptr->valid())
if (ptr1 || ptr2)
instead
if (ptr.valid() && ptr->valid())
if (ptr1.valid() || ptr2.valid())
- previously introduced `getOrDefault` as a dictionary _get_ method,
now complete the transition and use it everywhere instead of
`lookupOrDefault`. This avoids mixed usage of the two methods that
are identical in behaviour, makes for shorter names, and promotes
the distinction between "lookup" access (ie, return a token stream,
locate and return an entry) and "get" access (ie, the above with
conversion to concrete types such as scalar, label etc).
* Support default values for format/compress enum lookups.
- Avoids situations where the preferred default format is not ASCII.
For example, with dictionary input:
format binar;
The typing mistake would previously have caused formatEnum to
default to ASCII. We can now properly control its behaviour.
IOstream::formatEnum
(
dict.get<word>("format"), IOstream::BINARY
);
Allowing us to switch ascii/binary, using BINARY by default even in
the case of spelling mistakes. The mistakes are flagged, but the
return value can be non-ASCII.
* The format/compression lookup behave as pass-through if the lookup
string is empty.
- Allows the following to work without complaint
IOstream::formatEnum
(
dict.getOrDefault("format", word::null), IOstream::BINARY
);
- Or use constructor-like failsafe method
IOstream::formatEnum("format", dict, IOstream::BINARY);
- Apply the same behaviour with setting stream format/compression
from a word.
is.format("binar");
will emit a warning, but leave the stream format UNCHANGED
* Rationalize versionNumber construction
- constexpr constructors where possible.
Default construct is the "currentVersion"
- Construct from token to shift the burden to versionNumber.
Support token as argument to version().
Now:
is.version(headerDict.get<token>("version"));
or failsafe constructor method
is.version
(
IOstreamOption::versionNumber("version", headerDict)
);
Before (controlled input):
is.version
(
IOstreamOption::versionNumber
(
headerDict.get<float>("version")
)
);
Old, uncontrolled input - has been removed:
is.version(headerDict.lookup("version"));
* improve consistency, default behaviour for IOstreamOption construct
- constexpr constructors where possible
- add copy construct with change of format.
- construct IOstreamOption from streamFormat is now non-explicit.
This is a commonly expected result with no ill-effects
- silently deprecate 'startsWith', 'endsWith' methods
(added in 2016: 2b14360662), in favour of
'starts_with', 'ends_with' methods, corresponding to C++20 and
allowing us to cull then in a few years.
- handle single character versions of starts_with, ends_with.
- add single character version of removeEnd and silently deprecate
removeTrailing which did the same thing.
- drop the const versions of removeRepeated, removeTrailing.
Unused and with potential confusion.
STYLE: use shrink_to_fit(), erase()
- provide relativePath() for argList and for Time.
These are relative to the case globalPath().
Eg,
Info<< "output: " << runTime.relativePath(outputFile) << nl;
- vtkWrite with moving mesh was not updated the subsets properly,
which caused it to crash.
- foamToVTK -overwrite ignored for single region cases,
was working for multi-region cases
- minor documentation changes
- parallel output.
The output is now postProcessing/<name> for similar reasoning as
mentioned in #866 - better alignment with other function objects, no
collision with foamToVTK output.
- align the input parameters with those of vtkCloud so that we can
specify the ASCII precision and the padding width for the output
file names as well.
- emit TimeValue field, support file series generation
- support internal or boundary meshes, combining the result into a vtm
file.
- can restrict conversion based on zone names, enclosing volumes,
bounding box
- default is now without polyhedral decomposition, since this produces
compacter files and VTK mananges this in most instances.
However, provide function object flag to reinstate the old behaviour.
- in many cases can just use lookupOrDefault("key", bool) instead of
lookupOrDefault<bool> or lookupOrDefault<Switch> since reading a
bool from an Istream uses the Switch(Istream&) anyhow
STYLE: relocated Switch string names into file-local scope
- disable automatically upgrading copyrights in files since changes to
not automatically imply a change in copyright. Eg, fixing a typo in
comments, or changing a variable from 'loopI' to 'loopi' etc.
