- fix typo in makefiles/info that affected wmake -show-compile-c
- additional safeguard in src/OpenFOAM/Make/options against self-linking.
This is not normally required unless PROJECT_LIBS has been added into
the link stage.
solaris:
- rename WM_ARCH from SunOS to solaris64 for consistency with wmake/rules
- drop non-64 solaris from wmake/rules
- remove automatic selection of FJMPI. This should be done in the bashrc
or prefs.sh file instead.
- remove old (likely inaccurate) exported flags, rely on wmake -show-xyz
or user config instead
darwin:
- remove '-Ddarwin' from the exported WM_CFLAGS, WM_CXXFLAGS.
Not used elsewhere (ThirdParty)
- with the wmake rules we may have some compiler options bound to the
internal compiler variable. For example,
CC = g++ -std=c++11 -m64
c++FLAGS = ...
So shift any flags from CC to CXXFLAGS for the output of
'wmake -show-cxx', 'wmake -show-cxxflags', etc.
This makes it much easier to handle the values correctly elsewhere.
Eg,
CXX="$(wmake -show-cxx)" CXXFLAGS="$(wmake -show-cxxflags)" \
./configure
- provide dedicated detection 'have_ptscotch' function that can be
used after the 'have_scotch' function.
It sets the PTSCOTCH_ARCH_PATH, PTSCOTCH_INC_DIR, PTSCOTCH_LIB_DIR
and helps when the serial and parallel versions are located with
different logic.
- can be useful for retrieving the compilation flags for use with other
make systems (eg, cmake)
* wmake -show-compile (C++ not C)
* wmake -show-cxx
* wmake -show-cxxflags
- with -mcpu=native for automatic detection and -armpl for linking in
the performance libraries
STYLE: relocate -mcpu into compiler instead of compiler-flags (#1225)
- in addition to managing different vendors and versions, it may also
be necessary or desirable to have a particular variant
(eg, profiling, release, etc).
Devise a new meaningful name for the variant and create a
corresponding wmake rule.
Eg, SYSTEMOPENMPI-profiling with a corresponding
"wmake/rules/linux64Gcc/mplibSYSTEMOPENMPI-profiling" file
that has suitable content for your system.
CONFIG: intel-mpi use intel64/ paths only for config and wmake rules (#1153)
- previously adjusted the config files, but missed the changes
required for the wmake rules too.
Now simply migrate to using "intel64/{include,bin,lib}"
instead of the older naming "{include,bin,lib}64"
These changes work since at least intel-mpi 2015 (5.x), but possibly
earlier as well
- was WM_PROJECT_API in the environment and FOAM_API in dictionaries.
Make these both consistently FOAM_API.
This is a non-breaking change, since the value of WM_PROJECT_API
(added in 1812) and/or FOAM_API is purely informative.
For the current correct values, always use
* foamEtcFile -show-api
* wmakeBuildInfo -show-api
- Note: mpich now builds libmpi.so instead of libmpich.so
- define both -DMPICH_SKIP_MPICXX and -DOMPI_SKIP_MPICXX regardless of
using openmpi or mpich. This simplifies the files and does not harm.
- instead of
WM_COMPILER=GccKNL WM_COMPILE_OPTION=Opt
-> linux64GccKNLDPInt32Opt
now specify
WM_COMPILER=Gcc WM_COMPILE_OPTION=OptKNL
-> linux64GccDPInt32OptKNL
This makes it easier (and more obvious) for adding different tweaks
without needing to generate too many files.
Eg,
cd wmake/rules/linux64Gcc
cp cOpt cOptBdw
cp c++Opt c++OptBdw
edit these two files and then use WM_COMPILE_OPTION=OptBdw
CONFIG: provide some default c/c++ flags in General compiler rules
- can make is easier when deriving new compile options, and ensures
that '-02' is enabled as an initial default.
- finds the correct root directory location before creating
the lnInclude directory
Eg,
from within something like src/finiteVolume/fields/fvPatchFields/..
wmakeLnInclude -update -root
it backtracks to find the top-level directory with Make/
and makes the lnInclude directory there:
Using /home/mark/openfoam/OpenFOAM-plus/src/finiteVolume
ln: /home/mark/openfoam/OpenFOAM-plus/src/finiteVolume/lnInclude
- was for parallel compilation across multiple hosts, but less useful
with modern CPUs with higher number of cores and/or hyperthreading.
Fragile use and dependent on a 'lockfile' utility that is not often
installed.
- was WM_PROJECT_API in the environment and FOAM_API in dictionaries.
Make these both consistently FOAM_API.
This is a non-breaking change, since the value of WM_PROJECT_API
(added in 1812) and/or FOAM_API is purely informative.
For the current correct values, always use
* foamEtcFile -show-api
* wmakeBuildInfo -show-api
- looks slightly messier without associative arrays, but improves
portability. Should now also work with dash.
STYLE: support wmakeBuildInfo -cmp and -check options as equivalent
- Use the OPENFOAM define (eg, 1806, 1812), which normally corresponds
to a major release, to define an API level. This remains consistent
within a release cycle and means that it is possible to manage
several sub-versions and continue to have a consistent lookup.
The current API value is updated automatically during the build
and cached as meta data for later use, even when the wmake/ directory
is missing or OpenFOAM has not yet be initialized.
The version information reported on program start or with -help
usage adjusted to reflect this. The build tag from git now also
carries the date as being more meaningful to trace than a hash
value.
- Update etc/bashrc and etc/cshrc to obtain the project directory
directly instead of via its prefix directory. The value obtained
corresponds to an absolute path, from which the prefix directory
can be obtained.
The combination of these changes removes the reliance on any
particular directory naming convention.
For example,
With an 1812 version (API level):
WM_PROJECT_VERSION=myVersion
installed as /some/path/somewhere/openfoam-mySandbox
This makes the -prefix, -foamInstall, -projectVersion, -version
values of foamEtcFiles, and similar entries for foamConfigurePaths
superfluous.
WM_PROJECT_INST_DIR is no longer required or used
ENH: improve handling and discovery of ThirdParty
- improve the flexibility and reusability of ThirdParty packs to cover
various standard use cases:
1. Unpacking initial release tar files with two parallel directories
- OpenFOAM-v1812/
- ThirdParty-v1812/
2. With an adjusted OpenFOAM directory name, for whatever reason
- OpenFOAM-v1812-myCustom/
- openfoam-1812-other-info/
3. Operating with/without ThirdParty directory
To handle these use cases, the following discovery is used.
Note PROJECT = the OpenFOAM directory `$WM_PROJECT_DIR`
PREFIX = the parent directory
VERSION = `$WM_PROJECT_VERSION`
API = `$WM_PROJECT_API`, as per `foamEtcFiles -show-api`
0. PROJECT/ThirdParty
- for single-directory installations
1. PREFIX/ThirdParty-VERSION
- this corresponds to the traditional approach
2. PREFIX/ThirdParty-vAPI
- allows for an updated value of VERSION (eg, v1812-myCustom)
without requiring a renamed ThirdParty. The API value
would still be '1812' and the original ThirdParty-v1812/
would be found.
3. PREFIX/ThirdParty-API
- this is the same as the previous example, but using an unadorned
API value. This also makes sense if the chosen version name also
uses the unadorned API value in its naming
(eg, 1812-patch190131, 1812.19W03)
4. PREFIX/ThirdParty-common
- permits maximum reuse for various versions, but only for
experienced user who are aware of potential version
incompatibilities
Directory existence is checked as is the presence of an Allwmake file
or a platforms/ directory. This reduces the potential of false positive
matches and limits the selection to directories that are either
with sources (has the Allwmake file), or pre-compiled binaries (has
the platforms/ directory).
If none of the explored directories are found to be suitable,
it reverts to using a PROJECT/ThirdParty dummy location since
this is within the project source tree and can be trusted to
have no negative side-effects.
ENH: add csh support to foamConfigurePaths
- this removes the previously experienced inconsistence in config file
contents.
REMOVED: foamExec
- was previously used when switching versions and before the
bashrc/cshrc discovery logic was added. It is now obsolete.
- provide default WM_DIR if not already set, to improve robustness if a
reduced environment is used
- add etc/ to WM_PROJECT_SITE search. This makes the site directory
structure consistent with the OpenFOAM structure.
Eg,
WM_PROJECT_SITE/etc/..
WM_PROJECT_SITE/bin/..
WM_PROJECT_SITE/platforms/..
- Don't set/export WM_OSTYPE. The default is POSIX and is properly
defaulted throughout, including in CMakeLists-OpenFOAM.txt (also for
Catalyst)
- append the commit hash value with the commit date when creating
the build string information and drop the version prefix.
This provides an immediate overview of when the code was last
changed. The prefixed version information can be dropped from
the build string, since it is readily available in other forms.
- removed reliance on ParaView_INCLUDE_DIR variable for conveying the
major.minor version information when compiling. This can be somewhat
fragile and also adds variable that is an unnecessary when running
(only used when compiling).
Instead use `have_pvplugin_support` function in paraviewFunctions
wmake script to determine the maj.min from the PV_PLUGIN_PATH
since we have already defined the output path there with paraview
maj.min numbering.
Can now build with paraview from the operating system,
provided that it has develop headers available.
ParaView_VERSION=system
In the etc/config.sh/paraview setup, the maj.min is taken from
the corresponding `paraview --version` output and used when
defining the PV_PLUGIN_PATH.
During the build, the include path taken from `paraview-config`
for a system installation, from the guess installation root
of the paraview binary, or ParaView_DIR otherwise.
NB: using a system ParaView for building runTimePostProcessing is unsupported.
- these types of builds appear to have various library resolution issues
(eg, libexpat not being loaded). Additionally, the build logic does
not yet cover this type of use case.
- if FOAM_EXT_LIBBIN is unset and some scripts set this to /usr/lib*
as a fallback (eg, to avoid an undefined value) this will cause a
system library to be found before appropriate *_ARCH_PATH entry.
This was noticed during a scotch compilation without third-party:
resulting in the system library (/usr/lib64/libscotch.so) to be found
instead of the SCOTCH_ARCH_PATH location
(/usr/lib64/mpi/gcc/openmpi/lib64/).
Simply changing the search order doesn't work for use, since we wish
to retain a preference for any dynamic libraries discovered in a
real FOAM_EXT_LIBBIN.
Circumvent these issues by only taking libraries from
FOAM_EXT_LIBBIN if it also points to a location within ThirdParty.
