74ff779618
tutorials/multiphase/interDyMFoam/ras/floatingObject: Update to demonstrate MULES with Crank-Nicolson
2015-02-22 12:53:34 +00:00
2aec249647
Updated the whole of OpenFOAM to use the new templated TurbulenceModels library
...
The old separate incompressible and compressible libraries have been removed.
Most of the commonly used RANS and LES models have been upgraded to the
new framework but there are a few missing which will be added over the
next few days, in particular the realizable k-epsilon model. Some of
the less common incompressible RANS models have been introduced into the
new library instantiated for incompressible flow only. If they prove to
be generally useful they can be templated for compressible and
multiphase application.
The Spalart-Allmaras DDES and IDDES models have been thoroughly
debugged, removing serious errors concerning the use of S rather than
Omega.
The compressible instances of the models have been augmented by a simple
backward-compatible eddyDiffusivity model for thermal transport based on
alphat and alphaEff. This will be replaced with a separate run-time
selectable thermal transport model framework in a few weeks.
For simplicity and ease of maintenance and further development the
turbulent transport and wall modeling is based on nut/nuEff rather than
mut/muEff for compressible models so that all forms of turbulence models
can use the same wall-functions and other BCs.
All turbulence model selection made in the constant/turbulenceProperties
dictionary with RAS and LES as sub-dictionaries rather than in separate
files which added huge complexity for multiphase.
All tutorials have been updated so study the changes and update your own
cases by comparison with similar cases provided.
Sorry for the inconvenience in the break in backward-compatibility but
this update to the turbulence modeling is an essential step in the
future of OpenFOAM to allow more models to be added and maintained for a
wider range of cases and physics. Over the next weeks and months more
turbulence models will be added of single and multiphase flow, more
additional sub-models and further development and testing of existing
models. I hope this brings benefits to all OpenFOAM users.
Henry G. Weller
2015-01-21 19:21:39 +00:00
41368addc9
Minor change to comment
2014-12-14 21:50:14 +00:00
9fb26d59d3
GIT: Repo update
2014-12-11 08:35:10 +00:00
d49889402f
sixDoFRigidBodyMotion: Add support to specify the centre for rotation independent of the centre of mass
...
via the point, line or plane constraints.
2014-05-16 15:35:11 +01:00
e6236340b5
Removed alphaOuterCorrectors option because the mass-flux should be updated for all PIMPLE iterations
...
Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=1225
2014-03-17 21:31:09 +00:00
fbb3ddf2c4
Updated for release 2.3.0
2014-02-17 10:21:46 +00:00
bd5e4cf172
Default transport solver: change from PBiCG to smoothSolver with symGaussSeidel smoother
...
Better for most but not all cases.
2014-02-04 16:27:35 +00:00
a7ad50ce7d
VoF tutorials: changed interfaceCompression to linear
...
This provided greater accuracy and stability while MULES guarantees boundedness
2014-01-23 11:30:45 +00:00
8af82f02bf
sixDoFRigidBodyMotion: remove the constraint and restraint "Coeffs"
...
sub-dict and put the coefficients in the containing dictionary.
2013-12-15 22:30:52 +00:00
76ae0daa28
sixDoFRigidBodyMotion/sixDoFRigidBodyMotionSolver: Support restart by caching state in the uniform directory
...
sixDoFRigidBodyMotionSolver: use point-edge rather than face-cell wave to calculate point distance to surface.
2013-12-10 14:07:27 +00:00
a09d30dc90
interDyMFoam/ras/floatingObject: apply sixDoFRigidBodyMotion solver
...
Keep original case as floatingObjectOld
2013-12-08 22:03:56 +00:00
5ffda9b52b
sixDoFRigidBodyMotion: Created separate library
...
Added sixDoFRigidBodyMotionSolver using septernion interpolation for mesh-morphing
2013-12-08 21:59:40 +00:00
f8b9abc146
Choose scotch for decomposition
2013-11-10 13:59:54 +00:00
3e715dfb70
floatingObject
...
interDyMFoam/ras/floatingObject: Relax the acceleration
2013-11-07 12:23:17 +00:00
6df8f705ae
6-DoF solid body motion: Support PIMPLE iteration and acceleration relaxation
2013-10-31 10:22:26 +00:00
e2a043d010
Tutorials: removed unnecessary entries from fixedFluxPressure BC specs
2013-09-11 09:49:46 +01:00
2780df8365
multiphase: Update phase-naming to use the new convention e.g. alpha.water
2013-08-13 23:21:46 +01:00
052d81785a
multiphase: move alpha solution controls into the appropriate sub-dictionary of fvSolution:solvers
2013-06-20 16:32:39 +01:00
bfbfa8f4a5
ENH: motionSolvers: dynamicMeshDict new syntax
2012-08-31 16:51:26 +01:00
c1d61707b6
interDyMFoam tutorials: use phiAbs for P BCs
2012-08-02 16:33:32 +01:00
1464c4ff5c
multiphase (VoF): Added support for general turbulence models
...
Required the addition of the divDevRhoR function to all incompressible turbulence models
2012-07-27 14:56:01 +01:00
ef8efc27ba
Solvers and tutorials: changed use of buoyantPressure BC to fixedFluxPressure
2012-04-20 09:49:58 +01:00
2491f257b1
Corrected line lengths
2012-02-29 16:39:53 +00:00
52d5229be4
interDyMFoam floatingObject tutorial: update relaxation factors
2012-01-31 11:19:36 +00:00
f4f078b979
ENH: Updated tutorial fvSolution files to employ updated solution ctrl params
2011-09-09 14:36:28 +01:00
c2dd153a14
Copyright transfered to the OpenFOAM Foundation
2011-08-14 12:17:30 +01:00
c720299876
ENH: Reverted back to version dev
2011-06-17 10:08:20 +01:00
29c485361a
STYLE: renamed version 2.0 -> 2.0.0
2011-06-08 16:31:07 +01:00
d2d91bb84f
STYLE: Updated tutorial headers to version 2.0
2011-06-07 11:18:46 +01:00
b6f8897268
tutorials: Upgraded all of the blockMeshDict files to the new format
...
Upgraded other files as necessary for consistency with the blockMeshDict, in
particular cases with cyclic patches.
2011-05-26 12:43:16 +01:00
a81bfbfa09
ENH: Tutorial updates
2011-05-12 12:17:39 +01:00
f3e2afa23c
ENH: Tutorial updates re: PIMPLE updates
2011-04-18 11:54:59 +01:00
154761a3a1
ENH: Updated tutorials
2011-04-15 16:46:35 +01:00
19c08b9e5a
tutorials: Set the file type to ascii for ascii files
2011-03-31 15:32:07 +01:00
e1c9f43c08
tutorials: Use getApplication to set the application rather than hard-coding it
2011-03-24 21:42:09 +00:00
0a6c711664
Tutorials: removed all references to metis to protect the innocent from persecution.
2011-01-07 12:01:08 +00:00
46cdaf8e32
ENH: Updated nBottomSweeps->nFinestSweeps in tutorials
2010-11-30 16:10:48 +00:00
89ee9b3e0f
Merged all multiphase developments in OpenFOAM-1.7.x
2010-09-29 22:22:48 +01:00
ccfb6e32a6
Corrected headers.
2010-06-23 16:54:54 +01:00
0ca515e3b1
Merge remote branch 'OpenCFD/master' into olesenm
2010-06-02 10:46:45 +02:00
ed6041eb50
ENH: Adding more useful information to sixDoFRigidBodyMotion restraint
...
reporting.
Making sixDoFRigidBodyMotionConstraints less verbose by default, now
requires debug switch to be set.
2010-05-31 12:00:53 +01:00
895a077cb1
STYLE: fixup some dictionary headers
2010-05-18 11:38:07 +02:00
7507b5f6bd
BUG: fixed subset action in topoSet; renamed sourceDict keyword to sourceInfo.
2010-05-11 12:09:49 +01:00
c367e07642
ENH: Converted all cellSet/faceSet/pointSet to topoSet.
2010-05-10 17:17:49 +01:00
3fef72510e
STYLE: use switch value for 'writeCompression' in controlDict's
...
- simpler/clearer to use "on/off" instead of "compressed/uncompressed"
2010-04-09 13:12:35 +02:00
cd768b7a5a
Merge remote branch 'OpenCFD/master' into olesenm
2010-03-17 08:52:10 +01:00
dbe29112e3
MULES limitation removed: sub-cycling time now supported on morphing meshes
...
Support for cell-volume interpolation during time sub-cycling now provided and
used in the MULES VoF solver to allow sub-cycling on morphing meshes.
2010-03-15 17:02:12 +00:00
6b6dd51a27
STYLE: more consistent shell style in tutorial run/clean scripts
2010-03-10 10:55:42 +01:00
9760c1c58e
STYLE: floatingObject tutorial. Brace indentation and removal of
...
default values for motion state.
2010-02-12 09:56:40 +00:00
