bd52e35f77
checkMesh: Updated the closed-ness test for ACMI to use FV
...
Patch contributed by Mattijs Janssens
Resolves bug-report http://bugs.openfoam.org/view.php?id=2088
2016-05-13 16:23:02 +01:00
6164c2f262
Standardized the naming of functions which control the writing of fields etc.
...
to have the prefix 'write' rather than 'output'
So outputTime() -> writeTime()
but 'outputTime()' is still supported for backward-compatibility.
Also removed the redundant secondary-writing functionality from Time
which has been superseded by the 'writeRegisteredObject' functionObject.
2016-05-12 17:38:01 +01:00
81f31acbb3
Updated headers
2016-04-30 21:53:19 +01:00
3c053c2fe6
GeometricField: Renamed internalField() -> primitiveField() and dimensionedInternalField() -> internalField()
...
These new names are more consistent and logical because:
primitiveField():
primitiveFieldRef():
Provides low-level access to the Field<Type> (primitive field)
without dimension or mesh-consistency checking. This should only be
used in the low-level functions where dimensional consistency is
ensured by careful programming and computational efficiency is
paramount.
internalField():
internalFieldRef():
Provides access to the DimensionedField<Type, GeoMesh> of values on
the internal mesh-type for which the GeometricField is defined and
supports dimension and checking and mesh-consistency checking.
2016-04-30 21:40:09 +01:00
450728ea84
Standardized cell, patch, face and processor loop index names
2016-04-25 12:00:53 +01:00
43beb06018
Standardized cell, patch and face loop index names
2016-04-25 10:28:32 +01:00
2d5ff31649
boundaryField() -> boundaryFieldRef()
2016-04-24 22:07:37 +01:00
5f13806591
Updated headers
2016-04-21 21:07:28 +01:00
0aaf154100
utilities/mesh/manipulation: Rationalized "End" message
2016-04-21 21:06:45 +01:00
d57464a99d
transformPoints: Added "End" message
...
Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=2059
2016-04-21 21:05:47 +01:00
8c6fa81eba
vector::zero -> Zero
2016-04-16 18:34:41 +01:00
a9b8bb13e0
applications/.*/Allwmake: Updated to support "stop on 1st error"
...
Patch contributed by Bruno Santos
Resolved bug-report http://www.openfoam.org/mantisbt/view.php?id=2042
2016-04-04 09:03:40 +01:00
730f89dc9d
Use Zero rather than pTraits<Type>::zero unless a static typed '0' is required
2016-03-22 17:46:52 +00:00
fa5867137d
transformPoints, surfaceTransformPoints: Updated quaternion construction from Euler-angles
...
Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=2024
2016-03-14 16:40:35 +00:00
eb5d349242
Rationalize the autoMesh library: autoMesh -> snappyHexMesh
2016-03-01 16:01:42 +00:00
7ba41e0095
Removed duplicate, inconsistent and spurious comments in .C files
2016-02-29 18:33:54 +00:00
95d146ecdf
Rationalized the indentation of C-preprocessor directives
2016-02-29 15:42:03 +00:00
cd852be3da
OpenFOAM: Updated all libraries, solvers and utilities to use the new const-safe tmp
...
The deprecated non-const tmp functionality is now on the compiler switch
NON_CONST_TMP which can be enabled by adding -DNON_CONST_TMP to EXE_INC
in the Make/options file. However, it is recommended to upgrade all
code to the new safer tmp by using the '.ref()' member function rather
than the non-const '()' dereference operator when non-const access to
the temporary object is required.
Please report any problems on Mantis.
Henry G. Weller
CFD Direct.
2016-02-26 17:31:28 +00:00
5a74397fe4
refineMesh: Added customizable direction fields to multiDirRefinement
...
Contribution provided by Bruno Santos
Resolves feature request http://www.openfoam.org/mantisbt/view.php?id=2004
2016-02-22 17:06:18 +00:00
c35bcc05f4
Merge branch 'develop' of develop.openfoam.com:Development/OpenFOAM-plus into develop
2016-06-27 23:22:54 +01:00
efb39a8790
ENH: (further) Doxygen documentation updates for module support
2016-06-27 20:34:19 +01:00
cbc169adba
ENH: insideCells: does not run parallel. Fixes #162 .
2016-06-27 10:14:18 +01:00
c4b5880f9c
BUG: cyclicACMI: make conservative. Remove faceAreas0
2016-06-06 14:30:00 +01:00
b9313ef2fe
ENH: Consistency updates after Foundation merge and code tidying
2016-04-25 16:46:56 +01:00
fd9d801e2d
GIT: Initial commit after latest foundation merge
2016-04-25 11:40:48 +01:00
350d03246e
scripts: Reformat with consistent section separators
2016-02-15 18:30:24 +00:00
9e3ce4ec7f
Merge branch 'master' of develop.openfoam.com:Development/OpenFOAM-plus into feature-shared-file
...
Conflicts:
applications/utilities/mesh/advanced/refinementLevel/refinementLevel.C
applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/initialPointsMethod/pointFile/pointFile.C
applications/utilities/miscellaneous/foamHelp/helpTypes/helpBoundary/helpBoundary.C
applications/utilities/postProcessing/graphics/PV3Readers/PV3FoamReader/vtkPV3Foam/vtkPV3FoamUpdateInfo.C
applications/utilities/postProcessing/graphics/PV4Readers/PV4FoamReader/vtkPV4Foam/vtkPV4FoamUpdateInfo.C
applications/utilities/postProcessing/turbulence/createTurbulenceFields/createTurbulenceFields.C
applications/utilities/postProcessing/velocityField/Co/Co.C
applications/utilities/postProcessing/velocityField/Pe/Pe.C
applications/utilities/preProcessing/applyBoundaryLayer/applyBoundaryLayer.C
applications/utilities/preProcessing/changeDictionary/changeDictionary.C
applications/utilities/preProcessing/setFields/setFields.C
applications/utilities/surface/surfaceMeshConvert/surfaceMeshConvert.C
applications/utilities/surface/surfaceMeshExport/surfaceMeshExport.C
applications/utilities/surface/surfaceMeshImport/surfaceMeshImport.C
applications/utilities/surface/surfaceRedistributePar/surfaceRedistributePar.C
src/OpenFOAM/db/IOobject/IOobject.C
src/OpenFOAM/db/IOobjects/CompactIOList/CompactIOList.C
src/OpenFOAM/db/IOobjects/IOField/IOField.C
src/OpenFOAM/db/IOobjects/IOList/IOList.C
src/OpenFOAM/db/IOobjects/IOPtrList/IOPtrList.C
src/OpenFOAM/db/IOobjects/IOdictionary/IOdictionary.C
src/OpenFOAM/db/Time/findInstance.C
src/OpenFOAM/db/regIOobject/regIOobject.C
src/OpenFOAM/db/regIOobject/regIOobjectI.H
src/OpenFOAM/db/regIOobject/regIOobjectRead.C
src/OpenFOAM/db/regIOobject/regIOobjectWrite.C
src/OpenFOAM/meshes/polyMesh/mapPolyMesh/mapDistribute/IOmapDistribute.C
src/OpenFOAM/meshes/polyMesh/polyBoundaryMesh/polyBoundaryMesh.C
src/OpenFOAM/meshes/polyMesh/zones/ZoneMesh/ZoneMesh.C
src/dynamicMesh/fvMeshDistribute/IOmapDistributePolyMesh.C
src/dynamicMesh/motionSolver/componentDisplacement/componentDisplacementMotionSolver.C
src/dynamicMesh/polyTopoChange/polyTopoChange/hexRef8/hexRef8Data.C
src/dynamicMesh/polyTopoChange/polyTopoChange/hexRef8/refinementHistory.C
src/dynamicMesh/polyTopoChange/polyTopoChanger/polyTopoChanger.C
src/edgeMesh/edgeMeshFormats/edgeMesh/edgeMeshFormat.C
src/edgeMesh/extendedEdgeMesh/extendedEdgeMeshFormats/extendedEdgeMeshFormat/extendedEdgeMeshFormat.C
src/edgeMesh/extendedEdgeMesh/extendedFeatureEdgeMesh/extendedFeatureEdgeMesh.C
src/fvMotionSolver/fvMotionSolvers/displacement/interpolation/displacementInterpolationMotionSolver.C
src/fvMotionSolver/pointPatchFields/derived/uniformInterpolatedDisplacement/uniformInterpolatedDisplacementPointPatchVectorField.C
src/lagrangian/basic/Cloud/CloudIO.C
src/meshTools/sets/cellSources/fieldToCell/fieldToCell.C
src/postProcessing/foamCalcFunctions/basic/addSubtract/addSubtract.C
src/postProcessing/functionObjects/field/fieldCoordinateSystemTransform/fieldCoordinateSystemTransformTemplates.C
src/postProcessing/functionObjects/field/readFields/readFieldsTemplates.C
src/thermophysicalModels/radiation/radiationModels/fvDOM/radiativeIntensityRay/radiativeIntensityRay.C
src/triSurface/triSurface/surfacePatch/surfacePatchIOList.C
2016-01-25 16:29:04 +00:00
e424059208
ENH: glboal file handling: initial commit
...
Moved file path handling to regIOobject and made it type specific so
now every object can have its own rules. Examples:
- faceZones are now processor local (and don't search up anymore)
- timeStampMaster is now no longer hardcoded inside IOdictionary
(e.g. uniformDimensionedFields support it as well)
- the distributedTriSurfaceMesh is properly processor-local; no need
for fileModificationChecking manipulation.
2016-01-25 13:03:15 +00:00
56fa7c0906
Update code to use the simpler C++11 template syntax removing spaces between closing ">"s
2016-01-10 22:41:16 +00:00
75cf86b769
Correct formatting: "forAll (" -> "forAll("
...
Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=1967
2016-01-09 23:10:16 +00:00
f0c3e8d599
STYLE: Updated version to 'plus'
2015-12-22 23:14:17 +00:00
b90cd04ce7
END: splitMeshRegions: consistent exit output.
...
Fixes #35
2015-12-18 10:16:50 +00:00
5c9dff6146
GIT: Resolved conflict
2015-12-09 16:19:28 +00:00
8837a89237
STYLE: Updated links from openfoam.org to openfoam.com
2015-12-09 15:03:05 +00:00
dc64f53924
GIT: remove remnants of conflict
2015-12-09 10:20:10 +00:00
d52b01c806
ENH: Updated output messages
2015-12-09 09:40:23 +00:00
8f1d043364
GIT: Resolved conflict
2015-12-09 09:32:38 +00:00
acecae7e44
COMP: subsetMesh: Make/options adapted for new location of fvMeshSubset
2015-12-08 14:18:35 +00:00
eafd5a3850
ENH: Updated Info, Warning and Error messages
2015-12-08 11:15:39 +00:00
3f55f752fc
GIT: Resolve conflict with upstream merge from Foundation
2015-12-07 17:07:20 +00:00
73dac8c7ee
ENH: Updating utilities based on internal development line
2015-12-02 10:17:28 +00:00
2c2e8247ef
mirrorFvMesh: Corrected parallel operation
...
Patch provided by Bruno Santos
Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=1494
2015-11-29 21:40:37 +00:00
660b54b728
moveDynamicMesh: Iterate over mesh.update() according to the PIMPLE settings
...
Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=1926
2015-11-25 16:54:14 +00:00
916dcb8685
ENH: parallel: overhaul of parallel mapping
...
- redistributePar to have almost (complete) functionality of decomposePar+reconstructPar
- low-level distributed Field mapping
- support for mapping surfaceFields (including flipping faces)
- support for decomposing/reconstructing refinement data
2015-11-17 15:05:05 +00:00
7e7c27d09b
moveDynamicMesh: Iterate over mesh.update() according to the PIMPLE settings Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=1926
2015-11-25 16:54:14 +00:00
d5d35cd1e8
BUG: checkMesh: sets written only on master
2015-11-25 10:41:30 +00:00
61dd625227
ENH: checkMesh: have -writeSets option
...
- checkMesh has option to write faceSets or (outside of) cellSets as
sampledSurface format. It automatically reconstructs the set on the master
and writes it to the postProcessing folder (as any sampledSurface). E.g.
mpirun -np 6 checkMesh -allTopology -allGeometry -writeSets vtk -parallel
- fixed order writing of symmTensor in Ensight writers
2015-11-23 15:24:33 +00:00
e2ef006b91
applications: Update ...ErrorIn -> ...ErrorInFunction
...
Avoids the clutter and maintenance effort associated with providing the
function signature string.
2015-11-10 17:53:31 +00:00
42fb1b9e8e
Updated notImplemented -> NotImplemented
...
The new NotImplemented macro uses __PRETTY_FUNCTION__ for GNU compatible
compilers otherwise __func__ to provide the function name string.
2015-11-01 10:26:37 +00:00
c84187f7fd
subsetMesh/Make/options: removed unused entries
...
Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=1886
2015-10-31 17:55:59 +00:00
