- a valid() method (same as !empty() call) for consistency with other
containers and data types
- a centre() method (same as midpoint() method) for consistency with
other OpenFOAM geometric entities
- makes the intent clearer and avoids the need for additional
constructor casting. Eg,
labelList(10, Zero) vs. labelList(10, 0)
scalarField(10, Zero) vs. scalarField(10, scalar(0))
vectorField(10, Zero) vs. vectorField(10, vector::zero)
- make hasFaceId a top-level virtual method and remove keepIds
equivalent from sampledTriSurfaceMesh. This makes the property
available without casting.
- New sampling type 'none'.
Can be used to temporarily disable a sampling surface definition,
or to provide boilerplate for overwriting later.
- more dictionary-like methods, enforce keyType::LITERAL for all
lookups to avoid any spurious keyword matching.
- new readEntry, readIfPresent methods
- The get() method replaces the now deprecate lookup() method.
- Deprecate lookupOrFailsafe()
Failsafe behaviour is now an optional parameter for lookupOrDefault,
which makes it easier to tailor behaviour at runtime.
- output of the names is now always flatted without line-breaks.
Thus,
os << flatOutput(someEnumNames.names()) << nl;
os << someEnumNames << nl;
both generate the same output.
- Constructor now uses C-string (const char*) directly instead of
Foam::word in its initializer_list.
- Remove special enum + initializer_list constructor form since
it can create unbounded lookup indices.
- Removd old hasEnum, hasName forms that were provided during initial
transition from NamedEnum.
- Added static_assert on Enum contents to restrict to enum or
integral values. Should not likely be using this class to enumerate
other things since it internally uses an 'int' for its values.
Changed volumeType accordingly to enumerate on its type (enum),
not the class itself.
New name: findObject(), cfindObject()
Old name: lookupObjectPtr()
Return a const pointer or nullptr on failure.
New name: findObject()
Old name: --
Return a non-const pointer or nullptr on failure.
New name: getObjectPtr()
Old name: lookupObjectRefPtr()
Return a non-const pointer or nullptr on failure.
Can be called on a const object and it will perform a
const_cast.
- use these updated names and functionality in more places
NB: The older methods names are deprecated, but continue to be defined.
- nBoundaryFaces() is often used and is identical to
(nFaces() - nInternalFaces()).
- forward the mesh nInternalFaces() and nBoundaryFaces() to
polyBoundaryMesh as nFaces() and start() respectively,
for use when operating on a polyBoundaryMesh.
STYLE:
- use identity() function with starting offset when creating boundary maps.
labelList map
(
identity(mesh.nBoundaryFaces(), mesh.nInternalFaces())
);
vs.
labelList map(mesh.nBoundaryFaces());
forAll(map, i)
{
map[i] = mesh.nInternalFaces() + i;
}
- 'signed' input parameter only mandatory for distance > 0.
A distance <= 0 is always signed and the input parameter is ignored.
- Use normal distance when distance == 0. This has no effect when
the surface has no open edges, but improves on rounding issues
around the zero crossing when the surface has open edges.
This may still need future revisiting.
- avoid duplicate code by relocating cellZone selection and bounding box
sub-selection into cuttingPlane and cuttingSurfaceBaseSelection.
Allows reuse by inherited classes (sampledPlane, surfMeshSamplePlane).
- takes two general actions:
1. orient edge in canonical direction (positive gradient) and detect
any edge intersection.
2. edge intersection alpha (0-1)
- refactor into a cuttingSurfaceBase intermediate class with the
actions as templated parameters rather than function pointers. This
allows the use of lambda functions with captures from the caller.
- Since the local edges are oriented according to the gradient,
they can also be used to determine the correct face orientation.
This generalizes the algorithm for future reuse.
- there were previously no hashing mechanisms for lists so they
would fall back to the definition for primitives and hash the
memory location of the allocated List object.
- provide a UList::Hash<> sub-class for inheritance, and also a global
specialization for UList<T>, List<T> such that the hash value for
List<List<T>> cascades properly.
- provide similar function in triFace to ensure that it remains
similar in behaviour to face.
- added SymmHash to Pair, for use when order is unimportant.
STYLE: use string::hash() more consistently
- no particular reason to use Hash<word>() which forwards to
string::hash() anyhow
- takes a direct approach of determining which cells are cut and walks
the cell faces directly to build the resulting surface.
- better handling of corner cases.
* Avoids redundant points when the cut passes exactly through a
mesh point.
* Supresses generation of duplicates faces when the plane cut
coincides exactly with a mesh face.
- for severely concave cells where the plane cuts a face multiple times
there is currently no remedial action taken, except to note the
failure and unwind the insertion of the corresponding points and
faces.
- signedDistance() method is like distance() but retains
the positive/negative sign for the side of the plane.
- the sign() method returns the sign as -1,0,+1 integer for
classification purposes where it is important to distinguish between
a zero value and a positive value (eg, for cutting). Optional
tolerance can be supplied to round for zero.
- refactor and inlined simple and frequently used methods.
- add boundBox faceCentre() method, which can be useful for creating
clipping planes from a bounding box.
Relocated treeBoundBox faceNormals to boundBox since they apply
equally there - the meaning of the faces (x-min, x-max, etc)
is the same, even if the point addressing for the faces differs.
Some special adjustments are undertaken for distance = 0.
- With the isoSurfaceCell algorithm is used, additional checks for open
surfaces edges are used to limit the extend of resulting distance
surface. The resulting surface elements will not, however, contain
partial cell coverage.
- Always treated as signed (ignoring the input value), since it is
nearly impossible to generate any surface otherwise.
- aids with detection of excess tokens (issue #762)
- deprecated dictionary::operator[] in favour of the lookup() method
which offers more flexibilty and clarity of purpose.
Additionally, the read<> and get<> forms should generally be used
instead anyhow.
- when the iso-surface (eg, a cut plane, or distanceSurface) passes
exactly through the cell centre, zero-sized triangles can occur.
These should be merged away.
- Since 'bool' and 'Switch' use the _identical_ input mechanism
(ie, both accept true/false, on/off, yes/no, none, 1/0), the main
reason to prefer one or the other is the output.
The output for Switch is as text (eg, "true"), whereas for bool
it is label (0 or 1). If the output is required for a dictionary,
Switch may be appropriate. If the output is not required, or is only
used for Pstream exchange, bool can be more appropriate.
- improves backward compatibility and more naming consistency.
Retain setMany(iter1, iter2) to avoid ambiguity with the
PackedList::set(index, value) method.
- use normal instead of volumeType to decide on the sign.
This provides a continuous field and eliminates special handling of
GREAT in iso-surface routines.
- fix regression in isoSurfaceCell cutting that was introduced by the
previous adjustments for distanceSurface
- improvement documentation for surface sampling.
- can now specify alternative sampling scheme for obtaining the
face values instead of just using the "cell" value. For example,
sampleScheme cellPoint;
This can be useful for cases when the surface is close to a boundary
cell and there are large gradients in the sampled field.
- distanceSurface now handles non-closed surfaces more robustly.
Unknown regions (not inside or outside) are marked internally and
excluded from consideration. This allows use of 'signed' surfaces
where not previously possible.
- The bitSet class replaces the old PackedBoolList class.
The redesign provides better block-wise access and reduced method
calls. This helps both in cases where the bitSet may be relatively
sparse, and in cases where advantage of contiguous operations can be
made. This makes it easier to work with a bitSet as top-level object.
In addition to the previously available count() method to determine
if a bitSet is being used, now have simpler queries:
- all() - true if all bits in the addressable range are empty
- any() - true if any bits are set at all.
- none() - true if no bits are set.
These are faster than count() and allow early termination.
The new test() method tests the value of a single bit position and
returns a bool without any ambiguity caused by the return type
(like the get() method), nor the const/non-const access (like
operator[] has). The name corresponds to what std::bitset uses.
The new find_first(), find_last(), find_next() methods provide a faster
means of searching for bits that are set.
This can be especially useful when using a bitSet to control an
conditional:
OLD (with macro):
forAll(selected, celli)
{
if (selected[celli])
{
sumVol += mesh_.cellVolumes()[celli];
}
}
NEW (with const_iterator):
for (const label celli : selected)
{
sumVol += mesh_.cellVolumes()[celli];
}
or manually
for
(
label celli = selected.find_first();
celli != -1;
celli = selected.find_next()
)
{
sumVol += mesh_.cellVolumes()[celli];
}
- When marking up contiguous parts of a bitset, an interval can be
represented more efficiently as a labelRange of start/size.
For example,
OLD:
if (isA<processorPolyPatch>(pp))
{
forAll(pp, i)
{
ignoreFaces.set(i);
}
}
NEW:
if (isA<processorPolyPatch>(pp))
{
ignoreFaces.set(pp.range());
}
- both autoPtr and tmp are defined with an implicit construct from
nullptr (but with explicit construct from a pointer to null).
Thus is it safe to use 'nullptr' when returning an empty autoPtr or tmp.
- when constructing dimensioned fields that are to be zero-initialized,
it is preferrable to use a form such as
dimensionedScalar(dims, Zero)
dimensionedVector(dims, Zero)
rather than
dimensionedScalar("0", dims, 0)
dimensionedVector("zero", dims, vector::zero)
This reduces clutter and also avoids any suggestion that the name of
the dimensioned quantity has any influence on the field's name.
An even shorter version is possible. Eg,
dimensionedScalar(dims)
but reduces the clarity of meaning.
- NB: UniformDimensionedField is an exception to these style changes
since it does use the name of the dimensioned type (instead of the
regIOobject).
- in many cases can just use lookupOrDefault("key", bool) instead of
lookupOrDefault<bool> or lookupOrDefault<Switch> since reading a
bool from an Istream uses the Switch(Istream&) anyhow
STYLE: relocated Switch string names into file-local scope
- eliminate iterators from PackedList since they were unused, had
lower performance than direct access and added unneeded complexity.
- eliminate auto-vivify for the PackedList '[] operator.
The set() method provides any required auto-vivification and
removing this ability from the '[]' operator allows for a lower
when accessing the values. Replaced the previous cascade of iterators
with simpler reference class.
PackedBoolList:
- (temporarily) eliminate logic and addition operators since
these contained partially unclear semantics.
- the new test() method tests the value of a single bit position and
returns a bool without any ambiguity caused by the return type
(like the get() method), nor the const/non-const access (like
operator[] has). The name corresponds to what std::bitset uses.
- more consistent use of PackedBoolList test(), set(), unset() methods
for fewer operation and clearer code. Eg,
if (list.test(index)) ... | if (list[index]) ...
if (!list.test(index)) ... | if (list[index] == 0u) ...
list.set(index); | list[index] = 1u;
list.unset(index); | list[index] = 0u;
- deleted the operator=(const labelUList&) and replaced with a setMany()
method for more clarity about the intended operation and to avoid any
potential inadvertent behaviour.
This class is largely a pre-C++11 holdover. It is now possible to
simply use move construct/assignment directly.
In a few rare cases (eg, polyMesh::resetPrimitives) it has been
replaced by an autoPtr.
Improve alignment of its behaviour with std::unique_ptr
- element_type typedef
- release() method - identical to ptr() method
- get() method to get the pointer without checking and without releasing it.
- operator*() for dereferencing
Method name changes
- renamed rawPtr() to get()
- renamed rawRef() to ref(), removed unused const version.
Removed methods/operators
- assignment from a raw pointer was deleted (was rarely used).
Can be convenient, but uncontrolled and potentially unsafe.
Do allow assignment from a literal nullptr though, since this
can never leak (and also corresponds to the unique_ptr API).
Additional methods
- clone() method: forwards to the clone() method of the underlying
data object with argument forwarding.
- reset(autoPtr&&) as an alternative to operator=(autoPtr&&)
STYLE: avoid implicit conversion from autoPtr to object type in many places
- existing implementation has the following:
operator const T&() const { return operator*(); }
which means that the following code works:
autoPtr<mapPolyMesh> map = ...;
updateMesh(*map); // OK: explicit dereferencing
updateMesh(map()); // OK: explicit dereferencing
updateMesh(map); // OK: implicit dereferencing
for clarity it may preferable to avoid the implicit dereferencing
- prefer operator* to operator() when deferenced a return value
so it is clearer that a pointer is involve and not a function call
etc Eg, return *meshPtr_; vs. return meshPtr_();
- relocated ListAppendEqOp and ListUniqueEqOp to ListOps::appendEqOp
and ListOps::UniqueEqOp, respectively for better code isolation and
documentation of purpose.
- relocated setValues to ListOps::setValue() with many more
alternative selectors possible
- relocated createWithValues to ListOps::createWithValue
for better code isolation. The default initialization value is itself
now a default parameter, which allow for less typing.
Negative indices in the locations to set are now silently ignored,
which makes it possible to use an oldToNew mapping that includes
negative indices.
- additional ListOps::createWithValue taking a single position to set,
available both in copy assign and move assign versions.
Since a negative index is ignored, it is possible to combine with
the output of List::find() etc.
STYLE: changes for PackedList
- code simplication in the PackedList iterators, including dropping
the unused operator() on iterators, which is not available in plain
list versions either.
- improved sizing for PackedBoolList creation from a labelUList.
ENH: additional List constructors, for handling single element list.
- can assist in reducing constructor ambiguity, but can also helps
memory optimization when creating a single element list.
For example,
labelListList labels(one(), identity(mesh.nFaces()));
- now warn about the following:
* the bounding box does not overlap wih the global mesh
* plane does not intersect the (valid) bounding box
* plane does not intersect the global mesh
- add bounding to the "plane" variant of a sampled plane.
- these were previously taken from region-local directories
(eg, constant/region/triSurface), but this becomes difficult to
manage when there are many files and regions.
