- also disables PointData if manifold cells are detected.
This is a partial workaround for volPointInterpolation problems
with handling manifold cells.
- additional verbosity option for conversions
- ignore old `-finite-area` option and always convert available
finiteArea mesh/fields unless `-no-finite-area` is specified (#2374)
ENH: simplify point offset handling for ensight output
- extend writing to include compact face/cell lists
- a try/catch approach is not really robust enough (or even possible)
since read failures likely do not occur on all ranks simultaneously.
This leads to situations where the master has thrown an exception
(and thus exiting the current routine) while other ranks are still
waiting to receive data and the program blocks completely.
Since this primarily affects data conversion routines such as
foamToEnsight etc, treat similarly to lagrangian: check for the
existence of essential files before proceeding or not. This is
wrapped into a TryNew factory method:
autoPtr<faMesh> faMeshPtr(faMesh::TryNew(mesh));
if (faMeshPtr) ...
- less communication than gatherList/scatterList
ENH: refine send granularity in Pstream::exchange
STYLE: ensure PstreamBuffers and defaultCommsType agree
- simpler loops for lduSchedule
- the very old 'writer' class was fully stateless and always templated
on an particular output type.
This is now replaced with a 'coordSetWriter' with similar concepts
as previously introduced for surface writers (#1206).
- writers change from being a generic state-less set of routines to
more properly conforming to the normal notion of a writer.
- Parallel data is done *outside* of the writers, since they are used
in a wide variety of contexts and the caller is currently still in
a better position for deciding how to combine parallel data.
ENH: update sampleSets to sample on per-field basis (#2347)
- sample/write a field in a single step.
- support for 'sampleOnExecute' to obtain values at execution
intervals without writing.
- support 'sets' input as a dictionary entry (as well as a list),
which is similar to the changes for sampled-surface and permits use
of changeDictionary to modify content.
- globalIndex for gather to reduce parallel communication, less code
- qualify the sampleSet results (properties) with the name of the set.
The sample results were previously without a qualifier, which meant
that only the last property value was actually saved (previous ones
overwritten).
For example,
```
sample1
{
scalar
{
average(line,T) 349.96521;
min(line,T) 349.9544281;
max(line,T) 350;
average(cells,T) 349.9854619;
min(cells,T) 349.6589286;
max(cells,T) 350.4967271;
average(line,epsilon) 0.04947733869;
min(line,epsilon) 0.04449639927;
max(line,epsilon) 0.06452856475;
}
label
{
size(line,T) 79;
size(cells,T) 1720;
size(line,epsilon) 79;
}
}
```
ENH: update particleTracks application
- use globalIndex to manage original parcel addressing and
for gathering. Simplify code by introducing a helper class,
storing intermediate fields in hash tables instead of
separate lists.
ADDITIONAL NOTES:
- the regionSizeDistribution largely retains separate writers since
the utility of placing sum/dev/count for all fields into a single file
is questionable.
- the streamline writing remains a "soft" upgrade, which means that
scalar and vector fields are still collected a priori and not
on-the-fly. This is due to how the streamline infrastructure is
currently handled (should be upgraded in the future).
Automatic hole closure:
- introduces 'holeToFace' topoSet source
- used when detecting a 'leak-path'
- creates additional baffles to close the leak
Multi-stage layer addition:
- Can add layers in multiple passes
See issues: #2403, #2404
- for metis-like graphs there is no guarantee that a zero-sized graph
has an offsets list with size 1 or size 0, so always use
numCells = max(0, xadj.size()-1)
this was already done in most places, but missed in the
decomposeGeneral method
STYLE: use sumOp<label>() instead of plusOp<label>()
- PstreamBuffers nProcs() and allProcs() methods to recover the rank
information consistent with the communicator used for construction
- allowClearRecv() methods for more control over buffer reuse
For example,
pBufs.allowClearRecv(false);
forAll(particles, particlei)
{
pBufs.clear();
fill...
read via IPstream(..., pBufs);
}
This preserves the receive buffers memory allocation between calls.
- finishedNeighbourSends() method as compact wrapper for
finishedSends() when send/recv ranks are identically
(eg, neighbours)
- hasSendData()/hasRecvData() methods for PstreamBuffers.
Can be useful for some situations to skip reading entirely.
For example,
pBufs.finishedNeighbourSends(neighProcs);
if (!returnReduce(pBufs.hasRecvData(), orOp<bool>()))
{
// Nothing to do
continue;
}
...
On an individual basis:
for (const int proci : pBufs.allProcs())
{
if (pBufs.hasRecvData(proci))
{
...
}
}
Also conceivable to do the following instead (nonBlocking only):
if (!returnReduce(pBufs.hasSendData(), orOp<bool>()))
{
// Nothing to do
pBufs.clear();
continue;
}
pBufs.finishedNeighbourSends(neighProcs);
...
GIT: relocate globalIndex (is independent of mesh)
STYLE: include label/scalar Fwd in contiguous.H
STYLE: unneed commSchedule include in GeometricField
- do not need STRINGIFY macros in ragel code
- remove wordPairHashTable.H and use equivalent wordPairHashes.H instead
STYLE: replace addDictOption with explicit option
- the usage text is otherwise misleading
GIT: combine Pair/Tuple2 directories
- unused in regular OpenFOAM code
- POSIX version uses deprecated gethostbyname()
- Windows version never worked
COMP: localize, noexcept on internal OSspecific methods
STYLE: support fileName::Type SYMLINK and LINK as synonyms
- set() was silently deprecated in favour of reset() FEB-2018
since the original additional check for overwriting an existing
pointer was never used. The reset(...) name is more consistent
with unique_ptr, tmp etc.
Now emit deprecations for set().
- use direct test for autoPtr, tmp instead of valid() method.
More consistent with unique_ptr etc.
STYLE: eliminate redundant ptr() use on cloned quantities
- literal lookups only for expression strings
- code reduction for setExprFields.
- changed keyword "condition" to "fieldMask" (option -field-mask).
This is a better description of its purpose and avoids possible
naming ambiguities with functionObject triggers (for example)
if we apply similar syntax elsewhere.
BUG: erroneous check in volumeExpr::parseDriver::isResultType()
- not triggered since this method is not used anywhere
(may remove in future version)
The utility will now add field data to all tracks (previous version only
created the geometry)
The new 'fields' entry can be used to output specific fields.
Example
cloud reactingCloud1;
sampleFrequency 1;
maxPositions 1000000;
fields (d U); // includes wildcard support
STYLE: minor typo fix
- use FACE_DATA (was SURFACE_DATA) for similarity with polySurface
ENH: add expression value enumerations and traits
- simple enumeration of standard types (bool, label, scalar, vector)
that can be used as a value type-code for internal bookkeeping.
GIT: relocate pTraits into general traits/ directory
- decomposePar: -no-fields to suppress decomposition of fields
- makeFaMesh: -no-decompose to suppress creation of *ProcAddressing
and fields, -no-fields to suppress decomposition of fields only
- switch from default topology merge to point merge if degenerate
blocks are detected. This should alleviate the problems noted in
#1862.
NB: this detection only works for blocks with duplicate vertex
indices, not ones with geometrically duplicate points.
ENH: add patch block/face summary in blockMesh generation
- add blockMesh -verbose option to override the static or dictionary
settings. The -verbose option can be used multiple times to increase
the verbosity.
ENH: extend hexCell handling with more cellShape-type methods
- allows better reuse in blockMesh.
Remove blockMesh-local hex edge definitions that shadowed the
hexCell values.
ENH: simplify some of the block-edge internals
- similar to -dry-run handling, can be interrogated from argList,
which makes it simpler to add into utilities.
- support multiple uses of -dry-run and -verbose to increase the
level. For example, could have
someApplication -verbose -verbose
and inside of the application:
if (args.verbose() > 2) ...
BUG: error with empty distributed roots specification (fixes#2196)
- previously used the size of distributed roots to transmit if the
case was running in distributed mode, but this behaves rather poorly
with bad input. Specifically, the following questionable setup:
distributed true;
roots ( /*none*/ );
Now transmit the ParRunControl distributed() value instead,
and also emit a gentle warning for the user:
WARNING: running distributed but did not specify roots!
- added -dry-run, -write-vtk options.
Additional mesh information after creation.
- add parallel reductions and more information for checkFaMesh
ENH: minor cleanup of faPatch internals
- align pointLabels and pointEdges creation more closely with coding
patterns used in PrimitivePatch
- use fileHandler when loading "S0" field.
