/*--------------------------------*- C++ -*----------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  dev                                   |
|   \\  /    A nd           | Web:      http://www.openfoam.org               |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
FoamFile
{
    version     2.0;
    format      ascii;
    class       dictionary;
    location    "system";
    object      subsetMeshDict;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

//- Load snappyHexMeshDict settings so we can use some entries below.
#include "./snappyHexMeshDict"


selections
{
    badQuality
    {
        // Remove any cells using a 'bad quality' face. Uses the mesh checks
        // used by snappyHexMesh, cvMesh.
        type    badQuality;
        // Use the quality criteria from the snappyHexMeshDict
        ${:meshQualityControls}
    }

    outside
    {
        // Remove any cells not reachable from provided locations
        type    outside;

        //- Number of cell layers to erode mesh to detect holes in the mesh
        //  Set to 0 if not used.
        nErodeLayers 3;

        //- Define mesh location for keeping.
        //  In this case use the one from snappyHexMeshDict. This can
        //  optionally be a list of locations.
        locationsInMesh (${:castellatedMeshControls.locationInMesh});
    }
}


// ************************************************************************* //