mirror of
https://develop.openfoam.com/Development/openfoam.git
synced 2025-11-28 03:28:01 +00:00
861b273e56
by combining with and rationalizing functionality from
turbulentHeatFluxTemperatureFvPatchScalarField.
externalWallHeatFluxTemperatureFvPatchScalarField now replaces
turbulentHeatFluxTemperatureFvPatchScalarField which is no longer needed and has
been removed.
Description
This boundary condition applies a heat flux condition to temperature
on an external wall in one of three modes:
- fixed power: supply Q
- fixed heat flux: supply q
- fixed heat transfer coefficient: supply h and Ta
where:
\vartable
Q | Power [W]
q | Heat flux [W/m^2]
h | Heat transfer coefficient [W/m^2/K]
Ta | Ambient temperature [K]
\endvartable
For heat transfer coefficient mode optional thin thermal layer resistances
can be specified through thicknessLayers and kappaLayers entries.
The thermal conductivity \c kappa can either be retrieved from various
possible sources, as detailed in the class temperatureCoupledBase.
Usage
\table
Property | Description | Required | Default value
mode | 'power', 'flux' or 'coefficient' | yes |
Q | Power [W] | for mode 'power' |
q | Heat flux [W/m^2] | for mode 'flux' |
h | Heat transfer coefficient [W/m^2/K] | for mode 'coefficent' |
Ta | Ambient temperature [K] | for mode 'coefficient' |
thicknessLayers | Layer thicknesses [m] | no |
kappaLayers | Layer thermal conductivities [W/m/K] | no |
qr | Name of the radiative field | no | none
qrRelaxation | Relaxation factor for radiative field | no | 1
kappaMethod | Inherited from temperatureCoupledBase | inherited |
kappa | Inherited from temperatureCoupledBase | inherited |
\endtable
Example of the boundary condition specification:
\verbatim
<patchName>
{
type externalWallHeatFluxTemperature;
mode coefficient;
Ta uniform 300.0;
h uniform 10.0;
thicknessLayers (0.1 0.2 0.3 0.4);
kappaLayers (1 2 3 4);
kappaMethod fluidThermo;
value $internalField;
}
\endverbatim
OpenFOAM Configuration
The main OpenFOAM settings are located in the parent etc/ directory. The bash and csh shells are supported and to configure OpenFOAM source etc/bashrc or etc/cshrc respectively which source the following files in the config.sh or config.csh respectively:
settings: core settingsaliases: aliases for interactive shellsunset: sourced to clear as many OpenFOAM environment settings as possiblempi: MPI communications library settingsensight: application settings for EnSightparaview: application settings for ParaViewscotch: application settings for compiling against scotchmetis: application settings for compiling against metis 5
The config.*/example directories contains various example configuration files for the corresponding shell:
compiler: an example of fine tuning ThirdParty compiler settingsopenmpi: an example of fine tuning openmpi settings for OpenFOAMparaview: an example of chaining to the standard config/paraview with a different ParaView_VERSIONprefs: an example of supplying alternative site-defined settings