2b69485204
move post-processing scripts to usual CFD/octave folder
...
move scripts and invoke plotData after CFD-DEM run
2022-03-25 15:19:31 +01:00
f0454797af
add post-processing scripts for DEM data in R2_FB
2022-03-25 15:02:17 +01:00
06b0585ab1
clean up DEM scripts in R2_FB
...
clean up, slightly rearrange commands
2022-03-25 14:55:54 +01:00
6834013deb
move additional DEM data processing to separate file in R2_FB
...
move data averaging and output to separate file for better readability;
perform averaging for each size group and use mass-based (vs. number-
based) averages for global properties such as overall reduction,
resistance terms etc.
2022-03-25 14:48:13 +01:00
d3a01f0872
fix initial layer radii in R2_FB
...
R2 means reduction from magnetite to wüstite and like in Kinaci et al.
(2020) we should assume that reduction from hematite to magnetite is
already completed to avoid mixing the reaction processes;
hence, start the simulation with a negligible hematite layer
2022-03-25 14:17:23 +01:00
7d70846fa3
remove artificial temperature limiter in R2_FB
...
enforcing a temperature range should not be necessary in a stable
simulation
2022-03-25 13:18:24 +01:00
ccbbdba41f
clean up R2_FB system dicts
2022-03-25 13:15:43 +01:00
5e8a7e9475
clean up R2_FB 0 dicts
2022-03-25 13:10:13 +01:00
7fb38309e1
remove R2_FB unneeded 0 dicts
2022-03-25 13:00:50 +01:00
ea81e6d806
clean up R2_FB constant dicts
...
remove unneeded entries, update header to indicate actually used OF
version
2022-03-25 12:59:23 +01:00
c13aece161
update chemistry tutorials [ci skip]
...
adjust setup to changes made in the fix chem/shrink/core implementation
in LIGGGHTS (cf. commit abe32ee)
2020-09-17 16:58:51 +02:00
86697d0993
minor changes to some case files related to OF4/OF5/OF6
...
make switching between OpenFOAM versions a bit easier
2019-11-14 14:12:08 +01:00
8f94dba403
[OF6] adjust chemistry cases to OF6 syntax
...
OF4 -> OF5:
functionObjects
volRegion/surfaceRegion -> volFieldValue/surfaceFieldValue
fvOptions
limitTemperatureCoeffs: Tmin/Tmax -> min/max
OF5 -> OF6:
combustionProperties: noCombustion<> -> none (template parameters are no
longer required)
2019-11-13 13:42:38 +01:00
2292493e35
increase runtime of test case
2019-09-26 15:44:30 +02:00
ba35af963a
fix probe location
2019-09-26 15:13:28 +02:00
5bf3402415
write DEM data to DEM/post folder
2019-09-26 13:01:04 +02:00
29afb0e920
fix up probe locations in chemistry tutorials
2019-09-26 12:38:43 +02:00
b24acc76fa
fix up thermo_temp settings
...
- set dynamic to 'no' as number of particles does not change
- for a single particle set 'extra' dof to 0 to obtain correct ke
2019-09-26 09:51:11 +02:00
4c25d64af6
define probes directly in controlDict
...
test harness is not yet prepared to handle '#include' properly or read
probes from probesDict
2019-09-24 17:50:44 +02:00
f4b62ab0e0
fix typos in liggghts input scripts
2019-09-24 16:04:18 +02:00
fd26c2cb88
update testharness run configurations
...
remove post_scripts that we currently don't need for testing
2019-09-24 16:03:45 +02:00
4ac94e82c7
fix up Allclean.sh scripts [ci skip]
...
note that #!/bin/sh may invoke a different shell than #!/bin/bash
2019-09-19 16:40:07 +02:00
e452aa7929
clean up parCFDDEMrun.sh files
...
perform clean up via Allclean.sh scripts
2019-09-19 16:38:12 +02:00
75f132450f
use different controlDict for test harness runs
...
original case runtime is too long for test harness execution
2019-09-19 15:48:05 +02:00
838e0851b1
adjust case decomposition
2019-09-19 15:45:44 +02:00
6da1afb450
add execution of DEM init script to Allrun.sh
2019-09-19 15:45:28 +02:00
4cb4132cf0
remove temporary file [ci skip]
2019-09-19 13:47:43 +02:00
ef43a2b5e4
replace $casePath/CFD with $FOAM_CASE [ci skip]
2019-09-19 13:33:34 +02:00
be0fee8938
clean up whitespaces and comments
2019-09-19 13:32:58 +02:00
a31e6b0f86
delete temporary files
2019-09-19 13:30:16 +02:00
04c77886e8
fix test harness run configuration
2019-09-19 13:29:33 +02:00
35bb6ba7eb
replace $casePath/CFD with $FOAM_CASE [ci skip]
2019-09-19 12:30:24 +02:00
b4a3c358ff
fix test harness run configurations
2019-09-19 12:29:23 +02:00
a854a89116
clean up whitespaces and comments
2019-09-19 12:28:50 +02:00
faba96f750
delete temporary files
2019-09-19 12:24:33 +02:00
d5b12a5e30
delete temporary file and clean up whitespaces
2019-09-19 12:24:02 +02:00
0c1ddfb0cc
clean up whitespaces
2019-09-19 12:12:50 +02:00
e37d3b4e7e
fix test harness run configuration [ci skip]
2019-09-19 09:42:57 +02:00
a26052a8b7
replace $casePath/CFD with $FOAM_CASE
2019-09-19 09:41:06 +02:00
16700acdc1
adjust file permissions and clean up comments [ci skip]
2019-09-19 09:38:01 +02:00
7b00b7efed
clean up whitespaces and comments
2019-09-19 09:32:01 +02:00
e06741a47d
add required folder structure for DEM dump and restart files
2019-09-19 09:13:52 +02:00
6b1c2d76f1
add .sh file extension to Allclean scripts
2019-09-19 09:09:12 +02:00
ad34ba0efe
clean up some tutorial files [ci skip]
2019-09-18 21:15:31 +02:00
5d0ec35256
fix testharness run.config
2019-09-18 21:10:13 +02:00
4531711ed8
clean up whitespaces
2019-09-18 21:06:16 +02:00
7fb0161ca8
Add tutorial case for polydisperse R2 reaction with inert Quartz particles
2019-09-18 17:51:18 +02:00
df71bf5522
Remove obsolete tutorial case
2019-09-18 17:48:19 +02:00
f3135c083e
change fix densities to global in the tutorials.
2019-09-18 17:28:38 +02:00
14b64ef281
Move the ISO4695 Case into the SingleParticleCases folder
2019-09-18 16:43:56 +02:00
