foamToC: New run-time selection table of contents printing and interrogation utility
The new solver modules cannot provide the equivalent functionality of the -list
options available in the solver applications so foamToC has been developed as a
better, more general and flexible alternative, providing a means to print any or
all run-time selection tables in any or all libraries and search the tables for
any particular entries and print which library files the corresponding tables
are in, e.g.
foamToC -solver fluid -table fvPatchScalarField
Contents of table fvPatchScalarField, base type fvPatchField:
advective libfiniteVolume.so
calculated libfiniteVolume.so
codedFixedValue libfiniteVolume.so
codedMixed libfiniteVolume.so
compressible::alphatJayatillekeWallFunctionlibthermophysicalTransportModels.so
compressible::alphatWallFunction libthermophysicalTransportModels.so
compressible::thermalBaffle1D<eConstSolidThermoPhysics>libthermophysicalTransportModels.so
compressible::thermalBaffle1D<ePowerSolidThermoPhysics>libthermophysicalTransportModels.so
compressible::turbulentTemperatureCoupledBaffleMixedlibthermophysicalTransportModels.so
compressible::turbulentTemperatureRadCoupledMixedlibthermophysicalTransportModels.so
.
.
.
foamToC -solver fluid -search compressible::alphatWallFunction
compressible::alphatWallFunction is in tables
fvPatchField
fvPatchScalarField libthermophysicalTransportModels.so
and the very useful -allLibs option allows ALL libraries to be searched to find
in which table and which library file a particular model in in for example:
foamToC -allLibs -search phaseTurbulenceStabilisation
Loading libraries:
libtwoPhaseSurfaceTension.so
libcv2DMesh.so
libODE.so
.
.
.
phaseTurbulenceStabilisation is in tables
fvModel libmultiphaseEulerFoamFvModels.so
Application
foamToC
Description
Run-time selection table of contents printing and interrogation.
The run-time selection tables are populated by the optionally specified
solver class and any additional libraries listed in the \c -libs option or
all libraries using the \c -allLibs option. Once populated the tables can
be searched and printed by a range of options listed below. Table entries
are printed with the corresponding library they are in to aid selection
and the addition of \c libs entries to ensure availability to the solver.
Usage
\b foamToC [OPTION]
- \par -solver \<name\>
Specify the solver class
- \par -libs '(\"lib1.so\" ... \"libN.so\")'
Specify the additional libraries to load
- \par -allLibs
Load all libraries
- \par switches,
List all available debug, info and optimisation switches
- \par all,
List the contents of all the run-time selection tables
- \par tables
List the run-time selection table names (this is the default action)
- \par table \<name\>
List the contents of the specified table or the list sub-tables
- \par search \<name\>
Search for and list the tables containing the given entry
- \par scalarBCs,
List scalar field boundary conditions (fvPatchField<scalar>)
- \par vectorBCs,
List vector field boundary conditions (fvPatchField<vector>)
- \par functionObjects,
List functionObjects
- \par fvModels,
List fvModels
- \par fvConstraints,
List fvConstraints
Example usage:
- Print the list of scalar boundary conditions (fvPatchField<scalar>)
provided by the \c fluid solver without additional libraries:
\verbatim
foamToC -solver fluid -scalarBCs
\endverbatim
- Print the list of RAS momentum transport models provided by the
\c fluid solver:
\verbatim
foamToC -solver fluid -table RAScompressibleMomentumTransportModel
\endverbatim
- Print the list of functionObjects provided by the
\c multicomponentFluid solver with the libfieldFunctionObjects.so
library:
\verbatim
foamToC -solver multicomponentFluid \
-libs '("libfieldFunctionObjects.so")' -functionObjects
\endverbatim
- Print a complete list of all run-time selection tables:
\verbatim
foamToC -allLibs -tables
or
foamToC -allLibs
\endverbatim
- Print a complete list of all entries in all run-time selection tables:
\verbatim
foamToC -allLibs -all
\endverbatim
compressibleVoF supports cavitation fvModels which provide a more physical and
controllable approach to cavitation modelling than the simple homogeneous
equilibrium approximation used in cavitatingFoam.
The tutorials/multiphase/cavitatingFoam/RAS/throttle case has been converted to
tutorials/modules/compressibleVoF/throttle which demonstrates how to update
cases from cavitatingFoam to compressibleVoF.
A cavitatingFoam script is provided to redirect users to update their cases to
compressibleVoF.
executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces rhoCentralFoam and all the corresponding
tutorials have been updated and moved to tutorials/modules/shockFluid.
Unlike rhoCentralFoam shockFluid supports mesh refinement/unrefinement, topology
change, run-time mesh-to-mesh mapping, load-balancing in addition to general
mesh-motion.
The tutorials/modules/shockFluid/movingCone case has been updated to demonstrate
run-time mesh-to-mesh mapping mesh topology change based on the
tutorials/modules/incompressibleFluid/movingCone. shockFluid s
Description
Solver module for density-based solution of compressible flow
Based on central-upwind schemes of Kurganov and Tadmor with support for
mesh-motion and topology change.
Reference:
\verbatim
Greenshields, C. J., Weller, H. G., Gasparini, L.,
& Reese, J. M. (2010).
Implementation of semi‐discrete, non‐staggered central schemes
in a colocated, polyhedral, finite volume framework,
for high‐speed viscous flows.
International journal for numerical methods in fluids, 63(1), 1-21.
\endverbatim
SourceFiles
shockFluid.C
See also
Foam::solvers::fluidSolver
Foam::solvers::incompressibleFluid
executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces compressibleMultiphaseInterFoam and all the
corresponding tutorials have been updated and moved to
tutorials/modules/compressibleMultiphaseVoF.
compressibleMultiphaseVoF is derived from the multiphaseVoFSolver which adds
compressible multiphase capability to the VoFSolver base-class used as the basis
of all two-phase and multiphase VoF solvers.
Class
Foam::solvers::compressibleMultiphaseVoF
Description
Solver module for the solution of multiple compressible, isothermal
immiscible fluids using a VOF (volume of fluid) phase-fraction based
interface capturing approach, with optional mesh motion and mesh topology
changes including adaptive re-meshing.
The momentum and other fluid properties are of the "mixture" and a single
momentum equation is solved.
A mixture approach for momentum transport is provided in which a single
laminar, RAS or LES model is selected to model the momentum stress.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
SourceFiles
compressibleMultiphaseVoF.C
See also
Foam::solvers::VoFSolver
Foam::solvers::multiphaseVoFSolver
executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces multiphaseInterFoam and all the
corresponding tutorials have been updated and moved to
tutorials/modules/incompressibleMultiphaseVoF.
incompressibleMultiphaseVoF is derived from the multiphaseVoFSolver which adds
multiphase capability to the VoFSolver base-class used as the basis of all
two-phase and multiphase VoF solvers.
Class
Foam::solvers::incompressibleMultiphaseVoF
Description
Solver module for the solution of multiple incompressible, isothermal
immiscible fluids using a VOF (volume of fluid) phase-fraction based
interface capturing approach, with optional mesh motion and mesh topology
changes including adaptive re-meshing.
The momentum and other fluid properties are of the "mixture" and a single
momentum equation is solved.
A mixture approach for momentum transport is provided in which a single
laminar, RAS or LES model is selected to model the momentum stress.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
SourceFiles
incompressibleMultiphaseVoF.C
See also
Foam::solvers::VoFSolver
Foam::solvers::multiphaseVoFSolver
executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces solidDisplacementFoam and
solidEquilibriumDisplacementFoam and all the corresponding tutorials have been
updated and moved to tutorials/modules/solidDisplacement.
Class
Foam::solvers::solidDisplacement
Description
Solver module for steady or transient segregated finite-volume solution of
linear-elastic, small-strain deformation of a solid body, with optional
thermal diffusion and thermal stresses.
Solves for the displacement vector field D, also generating the stress
tensor field sigma, including the thermal stress contribution if selected.
SourceFiles
solidDisplacement.C
The accelerationFactor option in solidEquilibriumDisplacementFoam is now
available in solidDisplacementFoam when running steady-state, providing a >5x
speed-up to convergence of the updated beamEndLoad case. This makes
solidEquilibriumDisplacementFoam redundant and it has been removed.
executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces XiFoam and all the corresponding
tutorials have been updated and moved to tutorials/modules/XiFluid.
Class
Foam::solvers::XiFluid
Description
Solver module for compressible premixed/partially-premixed combustion with
turbulence modelling.
Combusting RANS code using the b-Xi two-equation model.
Xi may be obtained by either the solution of the Xi transport
equation or from an algebraic expression. Both approaches are
based on Gulder's flame speed correlation which has been shown
to be appropriate by comparison with the results from the
spectral model.
Strain effects are encorporated directly into the Xi equation
but not in the algebraic approximation. Further work need to be
done on this issue, particularly regarding the enhanced removal rate
caused by flame compression. Analysis using results of the spectral
model will be required.
For cases involving very lean Propane flames or other flames which are
very strain-sensitive, a transport equation for the laminar flame
speed is present. This equation is derived using heuristic arguments
involving the strain time scale and the strain-rate at extinction.
the transport velocity is the same as that for the Xi equation.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Optional fvModels and fvConstraints are provided to enhance the simulation
in many ways including adding various sources, chemical reactions,
combustion, Lagrangian particles, radiation, surface film etc. and
constraining or limiting the solution.
Reference:
\verbatim
Greenshields, C. J., & Weller, H. G. (2022).
Notes on Computational Fluid Dynamics: General Principles.
CFD Direct Ltd.: Reading, UK.
\endverbatim
SourceFiles
XiFluid.C
See also
Foam::solvers::fluidSolver
Foam::solvers::isothermalFluid
executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces interFoam and all the corresponding
tutorials have been updated and moved to tutorials/modules/incompressibleVoF.
Both incompressibleVoF and compressibleVoF solver modules are derived from the
common two-phase VoF base-class solvers::VoFSolver which handles the
complexities of VoF interface-compression, boundedness and conservation with
2nd-order schemes in space and time using the semi-implicit MULES limiter and
solution proceedure. This maximises code re-use, improves readability and
simplifies maintenance.
Class
Foam::solvers::incompressibleVoF
Description
Solver module for for 2 incompressible, isothermal immiscible fluids using a
VOF (volume of fluid) phase-fraction based interface capturing approach,
with optional mesh motion and mesh topology changes including adaptive
re-meshing.
The momentum and other fluid properties are of the "mixture" and a single
momentum equation is solved.
Either mixture or two-phase transport modelling may be selected. In the
mixture approach a single laminar, RAS or LES model is selected to model the
momentum stress. In the Euler-Euler two-phase approach separate laminar,
RAS or LES selected models are selected for each of the phases.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Optional fvModels and fvConstraints are provided to enhance the simulation
in many ways including adding various sources, Lagrangian
particles, surface film etc. and constraining or limiting the solution.
SourceFiles
incompressibleVoF.C
See also
Foam::solvers::VoFSolver
Foam::solvers::compressibleVoF
so that it can now be used with either the isothermalFluid or fluid solver
modules, thus supporting non-uniform fluid properties, compressibility and
thermal effect. This development makes the special potentialFreeSurfaceFoam
solver redundant as both the isothermalFluid and fluid solver modules are more
general and has been removed and replaced with a user redirection script.
The tutorials/multiphase/potentialFreeSurfaceFoam cases have been updated to run
with the isothermalFluid solver module:
tutorials/multiphase/potentialFreeSurfaceFoam/oscillatingBox
tutorials/multiphase/potentialFreeSurfaceFoam/movingOscillatingBox
which demonstrate how to upgrade potentialFreeSurfaceFoam cases to
isothermalFluid.
executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces compressibleInterFoam and all the
corresponding tutorials have been updated and moved to
tutorials/modules/compressibleVoF.
Class
Foam::solvers::compressibleVoF
Description
Solver module for for 2 compressible, non-isothermal immiscible fluids
using a VOF (volume of fluid) phase-fraction based interface capturing
approach, with optional mesh motion and mesh topology changes including
adaptive re-meshing.
The momentum and other fluid properties are of the "mixture" and a single
momentum equation is solved.
Either mixture or two-phase transport modelling may be selected. In the
mixture approach a single laminar, RAS or LES model is selected to model the
momentum stress. In the Euler-Euler two-phase approach separate laminar,
RAS or LES selected models are selected for each of the phases.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Optional fvModels and fvConstraints are provided to enhance the simulation
in many ways including adding various sources, Lagrangian
particles, surface film etc. and constraining or limiting the solution.
SourceFiles
compressibleVoF.C
See also
Foam::solvers::fluidSolver
MRF (multiple reference frames) can now be used to simulate SRF (single
reference frame) cases by defining the MRF zone to include all the cells is the
mesh and applying appropriate boundary conditions. The huge advantage of this
is that MRF can easily be added to any solver by the addition of forcing terms
in the momentum equation and absolute velocity to relative flux conversions in
the formulation of the pressure equation rather than having to reformulate the
momentum and pressure system based on the relative velocity as in traditional
SRF. Also most of the OpenFOAM solver applications and all the solver modules
already support MRF.
To enable this generalisation of MRF the transformations necessary on the
velocity boundary conditions in the MRF zone can no longer be handled by the
MRFZone class itself but special adapted fvPatchFields are required. Although
this adds to the case setup it provides much greater flexibility and now complex
inlet/outlet conditions can be applied within the MRF zone, necessary for some
SRF case and which was not possible in the original MRF implementation. Now for
walls rotating within the MRF zone the new 'MRFnoSlip' velocity boundary
conditions must be applied, e.g. in the
tutorials/modules/incompressibleFluid/mixerVessel2DMRF/constant/MRFProperties
case:
boundaryField
{
rotor
{
type MRFnoSlip;
}
stator
{
type noSlip;
}
front
{
type empty;
}
back
{
type empty;
}
}
similarly for SRF cases, e.g. in the
tutorials/modules/incompressibleFluid/mixerSRF case:
boundaryField
{
inlet
{
type fixedValue;
value uniform (0 0 -10);
}
outlet
{
type pressureInletOutletVelocity;
value $internalField;
}
rotor
{
type MRFnoSlip;
}
outerWall
{
type noSlip;
}
cyclic_half0
{
type cyclic;
}
cyclic_half1
{
type cyclic;
}
}
For SRF case all the cells should be selected in the MRFproperties dictionary
which is achieved by simply setting the optional 'selectionMode' entry to all,
e.g.:
SRF
{
selectionMode all;
origin (0 0 0);
axis (0 0 1);
rpm 1000;
}
In the above the rotational speed is set in RPM rather than rad/s simply by
setting the 'rpm' entry rather than 'omega'.
The tutorials/modules/incompressibleFluid/rotor2DSRF case is more complex and
demonstrates a transient SRF simulation of a rotor requiring the free-stream
velocity to rotate around the apparently stationary rotor which is achieved
using the new 'MRFFreestreamVelocity' velocity boundary condition. The
equivalent simulation can be achieved by simply rotating the entire mesh and
keeping the free-stream flow stationary and this is demonstrated in the
tutorials/modules/incompressibleFluid/rotor2DRotating case for comparison.
The special SRFSimpleFoam and SRFPimpleFoam solvers are now redundant and have
been replaced by redirection scripts providing details of the case migration
process.
executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces pimpleFoam, pisoFoam and simpleFoam and all
the corresponding tutorials have been updated and moved to
tutorials/modules/incompressibleFluid.
Class
Foam::solvers::incompressibleFluid
Description
Solver module for steady or transient turbulent flow of incompressible
isothermal fluids with optional mesh motion and change.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Optional fvModels and fvConstraints are provided to enhance the simulation
in many ways including adding various sources, constraining or limiting
the solution.
Reference:
\verbatim
Greenshields, C. J., & Weller, H. G. (2022).
Notes on Computational Fluid Dynamics: General Principles.
CFD Direct Ltd.: Reading, UK.
\endverbatim
SourceFiles
incompressibleFluid.C
See also
Foam::solvers::fluidSolver
Foam::solvers::isothermalFluid
in which different solver modules can be selected in each region to for complex
conjugate heat-transfer and other combined physics problems such as FSI
(fluid-structure interaction).
For single-region simulations the solver module is selected, instantiated and
executed in the PIMPLE loop in the new foamRun application.
For multi-region simulations the set of solver modules, one for each region, are
selected, instantiated and executed in the multi-region PIMPLE loop of new the
foamMultiRun application.
This provides a very general, flexible and extensible framework for complex
coupled problems by creating more solver modules, either by converting existing
solver applications or creating new ones.
The current set of solver modules provided are:
isothermalFluid
Solver module for steady or transient turbulent flow of compressible
isothermal fluids with optional mesh motion and mesh topology changes.
Created from the rhoSimpleFoam, rhoPimpleFoam and buoyantFoam solvers but
without the energy equation, hence isothermal. The buoyant pressure
formulation corresponding to the buoyantFoam solver is selected
automatically by the presence of the p_rgh pressure field in the start-time
directory.
fluid
Solver module for steady or transient turbulent flow of compressible fluids
with heat-transfer for HVAC and similar applications, with optional
mesh motion and mesh topology changes.
Derived from the isothermalFluid solver module with the addition of the
energy equation from the rhoSimpleFoam, rhoPimpleFoam and buoyantFoam
solvers, thus providing the equivalent functionality of these three solvers.
multicomponentFluid
Solver module for steady or transient turbulent flow of compressible
reacting fluids with optional mesh motion and mesh topology changes.
Derived from the isothermalFluid solver module with the addition of
multicomponent thermophysical properties energy and specie mass-fraction
equations from the reactingFoam solver, thus providing the equivalent
functionality in reactingFoam and buoyantReactingFoam. Chemical reactions
and/or combustion modelling may be optionally selected to simulate reacting
systems including fires, explosions etc.
solid
Solver module for turbulent flow of compressible fluids for conjugate heat
transfer, HVAC and similar applications, with optional mesh motion and mesh
topology changes.
The solid solver module may be selected in solid regions of a CHT case, with
either the fluid or multicomponentFluid solver module in the fluid regions
and executed with foamMultiRun to provide functionality equivalent
chtMultiRegionFoam but in a flexible and extensible framework for future
extension to more complex coupled problems.
All the usual fvModels, fvConstraints, functionObjects etc. are available with
these solver modules to support simulations including body-forces, local sources,
Lagrangian clouds, liquid films etc. etc.
Converting compressibleInterFoam and multiphaseEulerFoam into solver modules
would provide a significant enhancement to the CHT capability and incompressible
solvers like pimpleFoam run in conjunction with solidDisplacementFoam in
foamMultiRun would be useful for a range of FSI problems. Many other
combinations of existing solvers converted into solver modules could prove
useful for a very wide range of complex combined physics simulations.
All tutorials from the rhoSimpleFoam, rhoPimpleFoam, buoyantFoam, reactingFoam,
buoyantReactingFoam and chtMultiRegionFoam solver applications replaced by
solver modules have been updated and moved into the tutorials/modules directory:
modules
├── CHT
│ ├── coolingCylinder2D
│ ├── coolingSphere
│ ├── heatedDuct
│ ├── heatExchanger
│ ├── reverseBurner
│ └── shellAndTubeHeatExchanger
├── fluid
│ ├── aerofoilNACA0012
│ ├── aerofoilNACA0012Steady
│ ├── angledDuct
│ ├── angledDuctExplicitFixedCoeff
│ ├── angledDuctLTS
│ ├── annularThermalMixer
│ ├── BernardCells
│ ├── blockedChannel
│ ├── buoyantCavity
│ ├── cavity
│ ├── circuitBoardCooling
│ ├── decompressionTank
│ ├── externalCoupledCavity
│ ├── forwardStep
│ ├── helmholtzResonance
│ ├── hotRadiationRoom
│ ├── hotRadiationRoomFvDOM
│ ├── hotRoom
│ ├── hotRoomBoussinesq
│ ├── hotRoomBoussinesqSteady
│ ├── hotRoomComfort
│ ├── iglooWithFridges
│ ├── mixerVessel2DMRF
│ ├── nacaAirfoil
│ ├── pitzDaily
│ ├── prism
│ ├── shockTube
│ ├── squareBend
│ ├── squareBendLiq
│ └── squareBendLiqSteady
└── multicomponentFluid
├── aachenBomb
├── counterFlowFlame2D
├── counterFlowFlame2D_GRI
├── counterFlowFlame2D_GRI_TDAC
├── counterFlowFlame2DLTS
├── counterFlowFlame2DLTS_GRI_TDAC
├── cylinder
├── DLR_A_LTS
├── filter
├── hotBoxes
├── membrane
├── parcelInBox
├── rivuletPanel
├── SandiaD_LTS
├── simplifiedSiwek
├── smallPoolFire2D
├── smallPoolFire3D
├── splashPanel
├── verticalChannel
├── verticalChannelLTS
└── verticalChannelSteady
Also redirection scripts are provided for the replaced solvers which call
foamRun -solver <solver module name> or foamMultiRun in the case of
chtMultiRegionFoam for backward-compatibility.
Documentation for foamRun and foamMultiRun:
Application
foamRun
Description
Loads and executes an OpenFOAM solver module either specified by the
optional \c solver entry in the \c controlDict or as a command-line
argument.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Usage
\b foamRun [OPTION]
- \par -solver <name>
Solver name
- \par -libs '(\"lib1.so\" ... \"libN.so\")'
Specify the additional libraries loaded
Example usage:
- To run a \c rhoPimpleFoam case by specifying the solver on the
command line:
\verbatim
foamRun -solver fluid
\endverbatim
- To update and run a \c rhoPimpleFoam case add the following entries to
the controlDict:
\verbatim
application foamRun;
solver fluid;
\endverbatim
then execute \c foamRun
Application
foamMultiRun
Description
Loads and executes an OpenFOAM solver modules for each region of a
multiregion simulation e.g. for conjugate heat transfer.
The region solvers are specified in the \c regionSolvers dictionary entry in
\c controlDict, containing a list of pairs of region and solver names,
e.g. for a two region case with one fluid region named
liquid and one solid region named tubeWall:
\verbatim
regionSolvers
{
liquid fluid;
tubeWall solid;
}
\endverbatim
The \c regionSolvers entry is a dictionary to support name substitutions to
simplify the specification of a single solver type for a set of
regions, e.g.
\verbatim
fluidSolver fluid;
solidSolver solid;
regionSolvers
{
tube1 $fluidSolver;
tubeWall1 solid;
tube2 $fluidSolver;
tubeWall2 solid;
tube3 $fluidSolver;
tubeWall3 solid;
}
\endverbatim
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Usage
\b foamMultiRun [OPTION]
- \par -libs '(\"lib1.so\" ... \"libN.so\")'
Specify the additional libraries loaded
Example usage:
- To update and run a \c chtMultiRegion case add the following entries to
the controlDict:
\verbatim
application foamMultiRun;
regionSolvers
{
fluid fluid;
solid solid;
}
\endverbatim
then execute \c foamMultiRun
The cellProc field is the field of cell-processor labels.
The names "distribution" and "dist" have been removed as these are
ambiguous in relation to other forms of distribution and to distance.
The reconstructPar utility now reconstructs the mesh if and when it is
necessary to do so. The reconstructParMesh utility is therefore no
longer necessary and has been removed.
It was necessary/advantagous to consolidate these utilities into one
because in the case of mesh changes it becomes increasingly less clear
which of the separate utilities is responsible for reconstructing data
that is neither clearly physical field nor mesh topology; e.g., moving
points, sets, refinement data, and so on.
This is so that when an executable is removed and replaced by a
placeholder script, a pull, re-build and run now launches the script
rather than an out-of-date executable.
and moveDynamicMesh renamed to moveMesh
Description
Mesh motion and topological mesh change utility.
Executes the mover, topoChanger and distributor specified in the
dynamicMeshDict in a time-loop.
When cloning a case, users can copy the field data from the
from the latest time directory in the source case, using
the -latestTime option.
The -startFrom option enables the copied time directory to be
renamed, often as the '0' (zero) directory in the new case, e.g.
foamCloneCase -latestTime -startFrom 0 sourceCase newCase
When the time directories in the source and new cases are
different, the uniform directory and flux field "phi" are
deleted from the copied time directory to avoid incorrect
initial state.
Solver for steady or transient buoyant, turbulent flow of compressible fluids
for ventilation and heat-transfer, with optional mesh motion and mesh topology
changes. Created by merging buoyantSimpleFoam and buoyantPimpleFoam to provide
a more general solver and simplify maintenance.
With the general run-time selectable fvMeshMovers engine compression simulations
can be performed with reactingFoam so there is no longer any need for engine
specific solvers or engineMesh.
An engineFoam script is provided to redirect users to reactingFoam with
instructions.
topoSet is a more flexible and extensible replacement for setSet using standard
OpenFOAM dictionary input format rather than the limited command-line input
format developed specifically for setSet. This replacement allows for the
removal of a significant amount of code simplifying maintenance and the addition
of more topoSet sources.
The icx and icpx Intel compilers are selected by
WM_COMPILER=Icx
These compilers are based on the Clang front-end and hence the configuration
files are based on and nearly identical to those for Clang.
Support for the new OneAPI compilers replaces the now deprecated Intel icc, icpc
compilers.
The generation script has also been modified slightly to prevent empty
entries being generated for scripts with no options; e.g., the scripts
in $WM_PROJECT_DIR/bin that report a change in application name
