This change ensures only one include file is open at a time by storing the
included files on a dynamic list rather than scanning the tree and holding a
list of open buffers. This new approach is a bit faster and avoids the "too
many open files" error on machines with low limits on the number of file
descriptors allocated to users.
A new constraint patch has been added which permits AMI coupling in
cyclic geometries. The coupling is repeated with different multiples of
the cyclic transformation in order to achieve a full correspondence.
This allows, for example, a cylindrical AMI interface to be used in a
sector of a rotational geometry.
The patch is used in a similar manner to cyclicAMI, except that it has
an additional entry, "transformPatch". This entry must name a coupled
patch. The transformation used to repeat the AMI coupling is taken from
this patch. For example, in system/blockMeshDict:
boundary
(
cyclic1
{
type cyclic;
neighbourPatch cyclic2;
faces ( ... );
}
cyclic2
{
type cyclic;
neighbourPatch cyclic1;
faces ( ... );
}
cyclicRepeatAMI1
{
type cyclicRepeatAMI;
neighbourPatch cyclicRepeatAM2;
transformPatch cyclic1;
faces ( ... );
}
cyclicRepeatAMI2
{
type cyclicRepeatAMI;
neighbourPatch cyclicRepeatAMI1;
transformPatch cyclic1;
faces ( ... );
}
// other patches ...
);
In this example, the transformation between cyclic1 and cyclic2 is used
to define the repetition used by the two cyclicRepeatAMI patches.
Whether cyclic1 or cyclic2 is listed as the transform patch is not
important.
A tutorial, incompressible/pimpleFoam/RAS/impeller, has been added to
demonstrate the functionality. This contains two repeating AMI pairs;
one cylindrical and one planar.
A significant amount of maintenance has been carried out on the AMI and
ACMI patches as part of this work. The AMI methods now return
dimensionless weights by default, which prevents ambiguity over the
units of the weight field during construction. Large amounts of
duplicate code have also been removed by deriving ACMI classes from
their AMI equivalents. The reporting and writing of AMI weights has also
been unified.
This work was supported by Dr Victoria Suponitsky, at General Fusion
Solution controls now detect when convergence occurs at a write time and
avoid writing the final directory twice. This also resolves the issue
whereby a purgeWrite setting would remove an extra directory.
This resolves bug report https://bugs.openfoam.org/view.php?id=2904
Added a function object for the reacting Euler-Euler solvers which
evaluates and writes out the blended interfacial forces acting on a
given phase (drag, virtual mass, lift, wall lubrication and turbulent
dispersion).
Patch contributed by Institute of Fluid Dynamics, Helmholtz-Zentrum
Dresden - Rossendorf (HZDR)
The Sauter mean diameter calculation has been modified to be more stable
in the limit of vanishing phase fraction. The calculation of the overall
Sauter mean diameter for a populationBalance involving more than one
velocityGroup has been removed. This calculation depends upon the phase
fraction and it is not stable as the fractions tend to zero. The overall
Sauter mean diameter is only used for post-processing and can still be
recovered from the individual diameter fields of the involved
velocityGroups.
Some parts of the population balance modeling have also been renamed and
refactored.
Patch contributed by Institute of Fluid Dynamics, Helmholtz-Zentrum
Dresden - Rossendorf (HZDR)
Surfaces are specified as a list and the controls applied to each, e.g. in the
rhoPimpleFoam/RAS/annularThermalMixer tutorial:
surfaces
(
"AMI.obj"
"shaft.obj"
"wall.obj"
"statorBlades.obj"
"rotorBlades.obj"
);
includedAngle 150; // Identifes a feature when angle
// between faces < includedAngle
trimFeatures
{
minElem 10; // minimum edges within a feature
}
writeObj yes; // writes out _edgeMesh.obj files to view features
If different controls are required for different surfaces multiple
sub-dictionaries can be used:
AMIsurfaces
{
surfaces
(
"AMI.obj"
);
includedAngle 140; // Identifes a feature when angle
// between faces < includedAngle
trimFeatures
{
minElem 8; // minimum edges within a feature
}
writeObj yes; // writes out _edgeMesh.obj files to view features
}
otherSurfaces
{
surfaces
(
"shaft.obj"
"wall.obj"
"statorBlades.obj"
"rotorBlades.obj"
);
includedAngle 150; // Identifes a feature when angle
// between faces < includedAngle
trimFeatures
{
minElem 10; // minimum edges within a feature
}
writeObj yes; // writes out _edgeMesh.obj files to view features
}
Existing feature edge files corresponding to particular surfaces can be specified using
the "files" association list:
surfaces
(
"AMI.obj"
"shaft.obj"
"wall.obj"
"statorBlades.obj"
"rotorBlades.obj"
);
files
(
"AMI.obj" "constant/triSurface/AMI.obj.eMesh";
);
includedAngle 150; // Identifes a feature when angle
// between faces < includedAngle
trimFeatures
{
minElem 10; // minimum edges within a feature
}
writeObj yes; // writes out _edgeMesh.obj files to view features
An "inletOutlet" switch has been added to the wave velocity boundary
condition to allow the boundary to be fixed, as is possible for the
corresponding alpha condition.
A "heightAboveWave" option has been added to the wave superposition
class to calculate velocity based on the height above the wave, rather
than above the origin. This may improve initialisation but it may also
generate divergence in the initial velocity field.
The alpha condition has also been completed so that it applies a
modelled gradient when the flow points out and a wave pressure condition
is in use.
fvcAverage and fvcReconstruct both do divisions or inverses of surface
summed fields. A single-cell zero-dimension case, has no genuine faces
on which to sum, so surface sums are identically zero. This change
detects this situation and returns a zero value instead of failing due
to a divide by zero.
This allows the multiphase test cases to be reduced to just one cell.
to avoid the need for sed'ing the output. This improves performance by avoiding
the need for calling additional commands and generating a temporary file.
The calculations for mixture rho and U have been changed so that they
represent phase-averaged quantities over the moving phases only.
The mixture density is used as part of the pressure solution to
calculate buoyancy forces. The pressure within a stationary phase is
considered to be decoupled from the moving phases; i.e., it is
considered self-supporting. Therefore the stationary phase density
should not form a part of buoyancy calculations. This change to the
definition of mixture density ensures this.
Lookup of models associated with unordered phase pairs now searches for
both possible pair names; e.g. gasAndLiquid and liquidAndGas.
Patch contributed by Institute of Fluid Dynamics, Helmholtz-Zentrum
Dresden - Rossendorf (HZDR)
The nonRandomTwoLiquid and Roult interface composition models have been
instantiated (and updated so that they compile), and a fuller set of
multi-component liquids and multi-component and reacting gases have been
used.
The selection name of the saturated and nonRandomTwoLiquid models have
also been changed to remove the capitalisation from the first letter, as
is consistent with other sub-models that are not proper nouns.
