The velocity boundary conditions are corrected before the construction of the
face velocity or momentum but for multi-region cases with interacting velocity
boundary conditions this is only possible after all the region solver modules
have been constructed so it is better to delay the optional construction of the
face velocity/momentum until preSolve().
This avoids potential hidden run-time errors caused by solvers running with
boundary conditions which are not fully specified. Note that "null-constructor"
here means the constructor from patch and internal field only, no data is
provided.
Constraint and simple BCs such as 'calculated', 'zeroGradient' and others which
do not require user input to fully specify their operation remain on the
null-constructor table for the construction of fields with for example all
'calculated' or all 'zeroGradient' BCs.
Following this improvement the null-constructors have been removed from all
pointPatchFields not added to the null-constructor table thus reducing the
amount of code and maintenance overhead and making easier and more obvious to
write new pointPatchField types.
This avoids potential hidden run-time errors caused by solvers running with
boundary conditions which are not fully specified. Note that "null-constructor"
here means the constructor from patch and internal field only, no data is
provided.
Constraint and simple BCs such as 'calculated', 'zeroGradient' and others which
do not require user input to fully specify their operation remain on the
null-constructor table for the construction of fields with for example all
'calculated' or all 'zeroGradient' BCs.
A special version of the 'inletOutlet' fvPatchField named 'zeroInletOutlet' has
been added in which the inlet value is hard-coded to zero which allows this BC
to be included on the null-constructor table. This is useful for the 'age'
functionObject to avoid the need to provide the 'age' volScalarField at time 0
unless special inlet or outlet BCs are required. Also for isothermalFilm in
which the 'alpha' field is created automatically from the 'delta' field if it is
not present and can inherit 'zeroInletOutlet' from 'delta' if appropriate. If a
specific 'inletValue' is require or other more complex BCs then the 'alpha'
field file must be provided to specify these BCs as before.
Following this improvement it will now be possible to remove the
null-constructors from all fvPatchFields not added to the null-constructor
table, which is most of them, thus reducing the amount of code and maintenance
overhead and making easier and more obvious to write new fvPatchField types.
which allows lambda to set higher in the cells adjacent to the boundary which is
particularly useful when solving for waves in a domain with no mean-flow and
wave BCs to avoid numerical stability problems where the specified wave flow
reverses into the domain. The alternative is to use symmetry rather than wave
BCs on the side patches which is stable without using lambdaBoundary but there
is modest distortion of the wave profile adjacent to the side patches which does
not propagate into the domain due to the wave forcing.
to demonstrate motion of a floating object due to waves without any mean flow,
generated by the waveForcing fvModel using the waves specification in
constant/waveProperties which is also used for the side boundary conditions.
gcc-13 has new code checking and warning mechanisms which are useful but not
entirely robust and produce many false positives, particularly with respect to
local references:
warning: possibly dangling reference to a temporary
This commit resolves many of the new warning messages but the above false
warnings remain. It is possible to switch off this warning but as it also
provides some useful checks it is currently left on.
in which the mass transfer rate is based on the theory of
evaporation/condensation on a plane interface.
Class
Foam::compressible::cavitationModels::Saito
Description
Saito cavitation model.
Reference:
\verbatim
Saito, Y., Takami, R., Nakamori, I., & Ikohagi, T. (2007).
Numerical analysis of unsteady behavior of cloud cavitation
around a NACA0015 foil. Computational Mechanics, 40, 85-96.
\endverbatim
Usage:
\table
Property | Description | Required | Default value
liquid | Name of the liquid phase | yes |
pSat | Saturation vapor pressure | yes |
Ca | Interfacial area concentration coefficient [1/m] | yes |
Cv | Vapourisation rate coefficient | yes |
Cc | Condensation rate coefficient | yes |
alphaNuc | Nucleation site volume fraction | yes |
\endtable
Example:
\verbatim
model Saito;
liquid liquid;
pSat 79995;
Ca 0.1; // Interfacial area concentration coefficient [1/m]
Cc 1;
Cv 1;
alphaNuc 0.01;
\endverbatim
SourceFiles
Saito.C
The new general multi-region framework using the isothermalFilm and film solver
modules and executed with foamMultiRun is a much more flexible approach to the
inclusion of liquid films in simulations with the support for coupling to other
regions of various types e.g. gas flows, Lagrangian clouds, VoF, CHT etc. This
has all been achieved with a significant reduction in the number of lines of
code and significant improvements in code structure, readability and
maintainability.
This ensures that all fvModels in all regions are updated before continuity is
predicted in any region so that inter-region mass transfers are included in the
region continuity equations.
The filmCloudTransfer fvModel now supports an optional ejection model which
provides transfer of film to cloud by dripping from an inverted surface or
curvature separation:
Class
Foam::filmEjectionModels::dripping
Description
Dripping film to cloud ejection transfer model
On an inverted surface if the film thickness is sufficient to generate a
valid parcel the equivalent mass is removed from the film and transfered to
the cloud as a parcel containing droplets with a diameter obtained from
the specified parcelDistribution.
Usage
Example usage:
\verbatim
filmCloudTransfer
{
type filmCloudTransfer;
libs ("libfilmCloudTransfer.so");
ejection
{
model dripping;
deltaStable 5e-4;
minParticlesPerParcel 10;
parcelDistribution
{
type RosinRammler;
Q 0;
min 1e-3;
max 2e-3;
d 7.5e-05;
n 0.5;
}
}
}
\endverbatim
Class
Foam::filmEjectionModels::BrunDripping
Description
Brun dripping film to cloud ejection transfer model
If the film thickness exceeds the critical value needed to generate one or
more drops, the equivalent mass is removed from the film. The critical film
thickness is calculated from the Rayleigh-Taylor stability analysis of film
flow on an inclined plane by Brun et.al.
Reference:
\verbatim
Brun, P. T., Damiano, A., Rieu, P., Balestra, G., & Gallaire, F. (2015).
Rayleigh-Taylor instability under an inclined plane.
Physics of Fluids (1994-present), 27(8), 084107.
\endverbatim
The diameter of the drops formed are obtained from the local capillary
length multiplied by the \c dCoeff coefficient which defaults to 3.3.
Reference:
\verbatim
Lefebvre, A. (1988).
Atomisation and sprays
(Vol. 1040, No. 2756). CRC press.
\endverbatim
Usage
Example usage:
\verbatim
filmCloudTransfer
{
type filmCloudTransfer;
libs ("libfilmCloudTransfer.so");
ejection
{
model BrunDripping;
deltaStable 5e-4;
}
}
\endverbatim
Class
Foam::filmEjectionModels::curvatureSeparation
Description
Curvature induced separation film to cloud ejection transfer model
Assesses film curvature via the mesh geometry and calculates a force
balance of the form:
F_sum = F_inertial + F_body + F_surface_tension
If F_sum < 0, the film separates and is transferred to the cloud
if F_sum >= 0 the film remains attached.
Reference:
\verbatim
Owen, I., & Ryley, D. J. (1985).
The flow of thin liquid films around corners.
International journal of multiphase flow, 11(1), 51-62.
\endverbatim
Usage
Example usage:
\verbatim
filmCloudTransfer
{
type filmCloudTransfer;
libs ("libfilmCloudTransfer.so");
ejection
{
model curvatureSeparation;
deltaStable 5e-4;
}
}
\endverbatim
The new tutorials/modules/multiRegion/film/cylinderDripping tutorial case
demonstrates a film dripping into the cloud. The standard cylinder case is
turned upside-down (by changing the orientation of gravity) with an initial
0.2mm film of water over the surface which drips when the thickness is greater
than 0.5mm. Settings for all three ejection models are provided in the
constant/film/fvModels dictionary with the standard dripping model selected.
The volume of the fvCellSet is summed over all processors and is the correct
representation of the region for FV, it is not clear that writing the number of
cells in the set in the header of the functionObject output is useful and can be
obtained by other means.
