Description
Calculates the thermal comfort quantities predicted mean vote (PMV) and
predicted percentage of dissatisfaction (PPD) based on DIN ISO EN 7730:2005.
Usage
\table
Property | Description | Required | Default value
clothing | The insulation value of the cloth | no | 0
metabolicRate | The metabolic rate | no | 0.8
extWork | The external work | no | 0
Trad | Radiation temperature | no | -1
relHumidity | Relative humidity of the air | no | 50
pSat | Saturation pressure of water | no | -1
tolerance | Residual control for the cloth temperature | no | 1e-5
maxClothIter | Maximum number of iterations | no | 0
meanVelocity | Use a constant mean velocity in the whole domain | no |\
false
\endtable
\table
Predicted Mean Vote (PMV) | evaluation
+ 3 | hot
+ 2 | warm
+ 1 | slightly warm
+ 0 | neutral
- 1 | slightly cool
- 2 | cool
- 3 | cold
\endtable
\verbatim
comfortAnalysis
{
type comfort;
libs ("libfieldFunctionObjects.so");
executeControl writeTime;
writeControl writeTime;
}
\endverbatim
The new tutorial case heatTransfer/buoyantSimpleFoam/comfortHotRoom is provided
to demonstrate the calculation of PMV and PPD using the comfort functionObject.
This work is based on code and case contributed by Tobias Holzmann.
to enable the calculation of the residence time for a fluid; mainly used in HVAC
analysis. E.g. residence time of air inside a ventilated room, see the new
tutorial roomResidenceTime.
Contributed by Tobias Holzmann
By default most functionObjects now execute and write at the start-time except
those that perform averaging (fieldAverage, dsmcFields) which cannot be executed
until the end of the first time-step. There is also a new optional
functionObject dictionary entry "executeAtStart" which defaults to true but can
be set false if the execution and results of the functionObject are not required
or appropriate at the start-time.
A result of this change is that time logs of forces, sampling etc. now include a
values for time 0.
Description
Calculates the natural logarithm of the specified scalar field.
Performs \f$ln(max(x, a))\f$ where \f$x\f$ is the field and \f$a\f$ an
optional clip to handle 0 or negative \f$x\f$. Dimension checking can
optionally be suspended for this operation if \f$x\f$ is dimensioned.
Example of function object specification:
\verbatim
log1
{
type log;
libs ("libfieldFunctionObjects.so");
field p;
clip 1e-3;
checkDimensions no;
}
\endverbatim
or using \c postProcess
\verbatim
postProcess -func 'log(p, clip=1e-3, checkDimensions=no)'
\endverbatim
Usage
\table
Property | Description | Required | Default value
type | Type name: log | yes |
clip | Clip value | no |
checkDimensions | Dimension checking switch | no |
\endtable
The yPlus function object can now take a "phase" keyword which defines
the name of the phase for which to write yPlus. For example, to write
yPlus for a phase named "liquid", the following entry can be used:
yPlus1
{
type yPlus;
libs ("libfieldFunctionObjects.so");
phase liquid;
}
Note that this will only be necessary in Euler-Euler type simulations
where the phases have separate turbulence models. For VoF, the phase
name will not be required.
Patch contributed by Juho Peltola, VTT.
Currently these deleted function declarations are still in the private section
of the class declarations but will be moved by hand to the public section over
time as this is too complex to automate reliably.
Replaced all uses of complex Xfer class with C++11 "move" constructors and
assignment operators. Removed the now redundant Xfer class.
This substantial changes improves consistency between OpenFOAM and the C++11 STL
containers and algorithms, reduces memory allocation and copy overhead when
returning containers from functions and simplifies maintenance of the core
libraries significantly.
Registration occurs when the temporary field is transferred to a non-temporary
field via a constructor or if explicitly transferred to the database via the
regIOobject "store" methods.
This object calculates a field of the age of fluid in the domain; i.e.,
the time taken for a fluid particle to travel to a location from an
inlet. It outputs a field, named age, with dimensions of time, and
requires a solver and a div(phi,age) scheme to be specified. A number of
corrections for the solution procedure can be set, as well as the name
of the flux and density fields.
Example specification:
age1
{
type age;
libs ("libfieldFunctionObjects.so");
nCorr 10;
phi phi;
rho rho;
}
Example usage:
postProcess -func age -fields "(phi)" -latestTime
This work was supported by Robert Secor and Lori Holmes, at 3M
By default the prefix is no longer added to the field names but the previous
behaviour can be reproduced by setting the optional "prefix" entry to "on" or
"yes".
Description
Calculates the natural logarithm of the specified scalar field.
Performs \f$ln(max(x, a))\f$ where \f$x\f$ is the field and \f$a\f$ an
optional clip to handle 0 or negative \f$x\f$.
The etc/caseDicts/postProcessing/fields/log configuration file is provided so
that the simple #includeFunc can be used to execute this functionObject during
the run, e.g. for some dimensionless field x
functions
{
#includeFunc log(x)
}
or if x might be 0 or negative in some regions the optional clip may be applied:
functions
{
#includeFunc log(p,clip=1e-6)
}
The projection direction has been corrected to include the effect of
mesh motion. The case where the source and receiving faces are of
differing orientations and the particle displacement points into both is
now detected and handled.
The sampled sets have been renamed in a more explicit and consistent
manner, and two new ones have also been added. The available sets are as
follows:
arcUniform: Uniform samples along an arc. Replaces "circle", and
adds the ability to sample along only a part of the circle's
circumference. Example:
{
type arcUniform;
centre (0.95 0 0.25);
normal (1 0 0);
radial (0 0 0.25);
startAngle -1.57079633;
endAngle 0.52359878;
nPoints 200;
axis x;
}
boundaryPoints: Specified point samples associated with a subset of
the boundary. Replaces "patchCloud". Example:
{
type boundaryPoints;
patches (inlet1 inlet2);
points ((0 -0.05 0.05) (0 -0.05 0.1) (0 -0.05 0.15));
maxDistance 0.01;
axis x;
}
boundaryRandom: Random samples within a subset of the boundary.
Replaces "patchSeed", but changes the behaviour to be entirely
random. It does not seed the boundary face centres first. Example:
{
type boundaryRandom;
patches (inlet1 inlet2);
nPoints 1000;
axis x;
}
boxUniform: Uniform grid of samples within a axis-aligned box.
Replaces "array". Example:
{
type boxUniform;
box (0.95 0 0.25) (1.2 0.25 0.5);
nPoints (2 4 6);
axis x;
}
circleRandom: Random samples within a circle. New. Example:
{
type circleRandom;
centre (0.95 0 0.25);
normal (1 0 0);
radius 0.25;
nPoints 200;
axis x;
}
lineFace: Face-intersections along a line. Replaces "face". Example:
{
type lineFace;
start (0.6 0.6 0.5);
end (0.6 -0.3 -0.1);
axis x;
}
lineCell: Cell-samples along a line at the mid-points in-between
face-intersections. Replaces "midPoint". Example:
{
type lineCell;
start (0.5 0.6 0.5);
end (0.5 -0.3 -0.1);
axis x;
}
lineCellFace: Combination of "lineFace" and "lineCell". Replaces
"midPointAndFace". Example:
{
type lineCellFace;
start (0.55 0.6 0.5);
end (0.55 -0.3 -0.1);
axis x;
}
lineUniform: Uniform samples along a line. Replaces "uniform".
Example:
{
type lineUniform;
start (0.65 0.3 0.3);
end (0.65 -0.3 -0.1);
nPoints 200;
axis x;
}
points: Specified points. Replaces "cloud" when the ordered flag is
false, and "polyLine" when the ordered flag is true. Example:
{
type points;
points ((0 -0.05 0.05) (0 -0.05 0.1) (0 -0.05 0.15));
ordered yes;
axis x;
}
sphereRandom: Random samples within a sphere. New. Example:
{
type sphereRandom;
centre (0.95 0 0.25);
radius 0.25;
nPoints 200;
axis x;
}
triSurfaceMesh: Samples from all the points of a triSurfaceMesh.
Replaces "triSurfaceMeshPointSet". Example:
{
type triSurfaceMesh;
surface "surface.stl";
axis x;
}
The headers have also had documentation added. Example usage and a
description of the control parameters now exists for all sets.
In addition, a number of the algorithms which generate the sets have
been refactored or rewritten. This was done either to take advantage of
the recent changes to random number generation, or to remove ad-hoc
fixes that were made unnecessary by the barycentric tracking algorithm.
This is faster than the library functionality that it replaces, as it
allows the compiler to do inlining. It also does not utilise any static
state so generators do not interfere with each other. It is also faster
than the the array lookup in cachedRandom. The cachedRandom class
therefore offers no advantage over Random and has been removed.
