Corrected typos in comments
found using cspell. Patch contributed by Timo Niemi, VTT.
This commit is contained in:
Henry Weller
@ -25,7 +25,7 @@ Class
|
||||
Foam::XiEqModels::basicSubGrid
|
||||
|
||||
Description
|
||||
Basic sub-grid obstacle flame-wrinking enhancement factor model.
|
||||
Basic sub-grid obstacle flame-wrinkling enhancement factor model.
|
||||
Details supplied by J Puttock 2/7/06.
|
||||
|
||||
<b> Sub-grid flame area generation </b>
|
||||
@ -119,7 +119,7 @@ public:
|
||||
|
||||
// Member Functions
|
||||
|
||||
//- Return the flame-wrinking XiEq
|
||||
//- Return the flame-wrinkling XiEq
|
||||
virtual tmp<volScalarField> XiEq() const;
|
||||
|
||||
//- Update properties from given dictionary
|
||||
|
||||
@ -26,7 +26,7 @@ Class
|
||||
|
||||
Description
|
||||
|
||||
Basic sub-grid obstacle flame-wrinking generation rate coefficient model.
|
||||
Basic sub-grid obstacle flame-wrinkling generation rate coefficient model.
|
||||
Details supplied by J Puttock 2/7/06.
|
||||
|
||||
\f$ G_{sub} \f$ denotes the generation coefficient and it is given by
|
||||
@ -107,7 +107,7 @@ public:
|
||||
|
||||
// Member Functions
|
||||
|
||||
//- Return the flame-wrinking generation rate
|
||||
//- Return the flame-wrinkling generation rate
|
||||
virtual tmp<volScalarField> G() const;
|
||||
|
||||
//- Return the flame diffusivity
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2011-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2011-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -129,7 +129,7 @@ void PDRkEpsilon::correct()
|
||||
volScalarField G(GName(), rho_*nut_*(tgradU() && dev(twoSymm(tgradU()))));
|
||||
tgradU.clear();
|
||||
|
||||
// Update espsilon and G at the wall
|
||||
// Update epsilon and G at the wall
|
||||
epsilon_.boundaryFieldRef().updateCoeffs();
|
||||
|
||||
// Add the blockage generation term so that it is included consistently
|
||||
|
||||
@ -95,7 +95,7 @@ public:
|
||||
|
||||
// Member Functions
|
||||
|
||||
//- Return the flame-wrinking XiEq
|
||||
//- Return the flame-wrinkling XiEq
|
||||
virtual tmp<volScalarField> XiEq() const;
|
||||
|
||||
//- Update properties from given dictionary
|
||||
|
||||
@ -91,7 +91,7 @@ public:
|
||||
|
||||
// Member Functions
|
||||
|
||||
//- Return the flame-wrinking XiEq
|
||||
//- Return the flame-wrinkling XiEq
|
||||
virtual tmp<volScalarField> XiEq() const;
|
||||
|
||||
//- Update properties from given dictionary
|
||||
|
||||
@ -109,7 +109,7 @@ public:
|
||||
|
||||
// Member Functions
|
||||
|
||||
//- Return the flame-wrinking XiEq
|
||||
//- Return the flame-wrinkling XiEq
|
||||
virtual tmp<volScalarField> XiEq() const;
|
||||
|
||||
//- Update properties from given dictionary
|
||||
|
||||
@ -136,7 +136,7 @@ public:
|
||||
|
||||
// Member Functions
|
||||
|
||||
//- Return the flame-wrinking XiEq
|
||||
//- Return the flame-wrinkling XiEq
|
||||
virtual tmp<volScalarField> XiEq() const
|
||||
{
|
||||
return turbulence_.muEff();
|
||||
|
||||
@ -90,7 +90,7 @@ public:
|
||||
|
||||
// Member Functions
|
||||
|
||||
//- Return the flame-wrinking XiEq
|
||||
//- Return the flame-wrinkling XiEq
|
||||
virtual tmp<volScalarField> XiEq() const;
|
||||
|
||||
//- Update properties from given dictionary
|
||||
|
||||
@ -25,7 +25,7 @@ Class
|
||||
Foam::XiGModels::KTS
|
||||
|
||||
Description
|
||||
Simple Kolmogorov time-scale (KTS) model for the flame-wrinling generation
|
||||
Simple Kolmogorov time-scale (KTS) model for the flame-wrinkling generation
|
||||
rate.
|
||||
|
||||
SourceFiles
|
||||
@ -85,7 +85,7 @@ public:
|
||||
|
||||
// Member Functions
|
||||
|
||||
//- Return the flame-wrinking generation rate
|
||||
//- Return the flame-wrinkling generation rate
|
||||
virtual tmp<volScalarField> G() const;
|
||||
|
||||
//- Update properties from given dictionary
|
||||
|
||||
@ -127,7 +127,7 @@ public:
|
||||
|
||||
// Member Functions
|
||||
|
||||
//- Return the flame-wrinking generation rate
|
||||
//- Return the flame-wrinkling generation rate
|
||||
virtual tmp<volScalarField> G() const = 0;
|
||||
|
||||
//- Return the flame diffusivity
|
||||
|
||||
@ -25,7 +25,7 @@ Class
|
||||
Foam::XiGModels::instabilityG
|
||||
|
||||
Description
|
||||
Flame-surface instabilityG flame-wrinking generation rate coefficient model
|
||||
Flame-surface instabilityG flame-wrinkling generation rate coefficient model
|
||||
used in \link XiModel.H \endlink.
|
||||
|
||||
See Technical Report SH/RE/01R for details on the PDR modelling.
|
||||
@ -57,7 +57,7 @@ class instabilityG
|
||||
{
|
||||
// Private Data
|
||||
|
||||
//- Flame instabilityG wrinling generation rate coefficient
|
||||
//- Flame instabilityG wrinkling generation rate coefficient
|
||||
dimensionedScalar GIn_;
|
||||
|
||||
//- InstabilityG length-scale
|
||||
@ -94,7 +94,7 @@ public:
|
||||
|
||||
// Member Functions
|
||||
|
||||
//- Return the flame-wrinking generation rate
|
||||
//- Return the flame-wrinkling generation rate
|
||||
virtual tmp<volScalarField> G() const;
|
||||
|
||||
//- Return the flame diffusivity
|
||||
|
||||
@ -49,7 +49,7 @@ Description
|
||||
\f$ \Xi_{coeff} \f$ is a model constant.
|
||||
|
||||
\f$ \Xi^* \f$ is the total equilibrium wrinkling combining the effects
|
||||
of the flame inestability and turbulence interaction and is given by
|
||||
of the flame instability and turbulence interaction and is given by
|
||||
|
||||
\f[
|
||||
\Xi^* = \frac {R}{R - G_\eta - G_{in}}
|
||||
@ -61,7 +61,7 @@ Description
|
||||
interaction.
|
||||
|
||||
\f$ G_{in} = \kappa \rho_{u}/\rho_{b} \f$ is the generation
|
||||
rate due to the flame inestability.
|
||||
rate due to the flame instability.
|
||||
|
||||
By adding the removal rates of the two effects:
|
||||
|
||||
@ -79,7 +79,7 @@ Description
|
||||
\f$ \Xi_{\eta_{eq}} \f$ is the flame wrinkling due to turbulence.
|
||||
|
||||
\f$ \Xi_{{in}_{eq}} \f$ is the equilibrium level of the flame wrinkling
|
||||
generated by inestability. It is a constant (default 2.5).
|
||||
generated by instability. It is a constant (default 2.5).
|
||||
|
||||
|
||||
SourceFiles
|
||||
@ -122,7 +122,7 @@ protected:
|
||||
const volScalarField& b_;
|
||||
const surfaceScalarField& phi_;
|
||||
|
||||
//- Flame wrinking field
|
||||
//- Flame wrinkling field
|
||||
volScalarField Xi_;
|
||||
|
||||
|
||||
@ -199,7 +199,7 @@ public:
|
||||
|
||||
// Member Functions
|
||||
|
||||
//- Return the flame-wrinking Xi
|
||||
//- Return the flame-wrinkling Xi
|
||||
virtual const volScalarField& Xi() const
|
||||
{
|
||||
return Xi_;
|
||||
@ -219,10 +219,10 @@ public:
|
||||
)
|
||||
{}
|
||||
|
||||
//- Correct the flame-wrinking Xi
|
||||
//- Correct the flame-wrinkling Xi
|
||||
virtual void correct() = 0;
|
||||
|
||||
//- Correct the flame-wrinking Xi using the given convection scheme
|
||||
//- Correct the flame-wrinkling Xi using the given convection scheme
|
||||
virtual void correct(const fv::convectionScheme<scalar>&)
|
||||
{
|
||||
correct();
|
||||
|
||||
@ -98,7 +98,7 @@ public:
|
||||
//- Return the flame diffusivity
|
||||
virtual tmp<volScalarField> Db() const;
|
||||
|
||||
//- Correct the flame-wrinking Xi
|
||||
//- Correct the flame-wrinkling Xi
|
||||
virtual void correct();
|
||||
|
||||
//- Update properties from given dictionary
|
||||
|
||||
@ -83,7 +83,7 @@ public:
|
||||
|
||||
// Member Functions
|
||||
|
||||
//- Correct the flame-wrinking Xi
|
||||
//- Correct the flame-wrinkling Xi
|
||||
virtual void correct()
|
||||
{}
|
||||
|
||||
|
||||
@ -107,13 +107,13 @@ public:
|
||||
fields.add(Xi_);
|
||||
}
|
||||
|
||||
//- Correct the flame-wrinking Xi
|
||||
//- Correct the flame-wrinkling Xi
|
||||
virtual void correct()
|
||||
{
|
||||
NotImplemented;
|
||||
}
|
||||
|
||||
//- Correct the flame-wrinking Xi using the given convection scheme
|
||||
//- Correct the flame-wrinkling Xi using the given convection scheme
|
||||
virtual void correct(const fv::convectionScheme<scalar>& mvConvection);
|
||||
|
||||
//- Update properties from given dictionary
|
||||
|
||||
@ -30,7 +30,7 @@ Description
|
||||
Seven parameters are specified in terms of polynomial functions of
|
||||
stoichiometry. Two polynomials are fitted, covering different parts of the
|
||||
flammable range. If the mixture is outside the fitted range, linear
|
||||
interpolation is used between the extreme of the polynomio and the upper or
|
||||
interpolation is used between the extreme of the polynomial and the upper or
|
||||
lower flammable limit with the Markstein number constant.
|
||||
|
||||
Variations of pressure and temperature from the reference values are taken
|
||||
@ -43,7 +43,7 @@ Description
|
||||
|
||||
where:
|
||||
|
||||
\f$ a_{i} \f$ are the polinomial coefficients.
|
||||
\f$ a_{i} \f$ are the polynomial coefficients.
|
||||
|
||||
\f$ pexp \f$ and \f$ texp \f$ are the pressure and temperature factors
|
||||
respectively.
|
||||
@ -109,10 +109,10 @@ class SCOPE
|
||||
|
||||
dictionary coeffsDict_;
|
||||
|
||||
//- Lower flamability limit
|
||||
//- Lower flammability limit
|
||||
scalar LFL_;
|
||||
|
||||
//- Upper flamability limit
|
||||
//- Upper flammability limit
|
||||
scalar UFL_;
|
||||
|
||||
//- Lower Su polynomial
|
||||
|
||||
@ -114,7 +114,7 @@ public:
|
||||
return relativePermeability_;
|
||||
}
|
||||
|
||||
//- Return remenence
|
||||
//- Return remanence
|
||||
inline const dimensionedScalar& Mr() const
|
||||
{
|
||||
return remanence_;
|
||||
|
||||
@ -1,6 +1,6 @@
|
||||
Info<< "Total cylinder mass: " << fvc::domainIntegrate(rho).value() << endl;
|
||||
//Info<< "Total fuel mass: "
|
||||
// << fvc::domainIntegrate(rho*compostion.ft()).value() << endl;
|
||||
// << fvc::domainIntegrate(rho*composition.ft()).value() << endl;
|
||||
|
||||
OFstream logSummaryFile
|
||||
(
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2011-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2011-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -134,7 +134,7 @@ public:
|
||||
// ********************************** NB! *****************************
|
||||
// for numerical reasons alpha1 and alpha2 has been
|
||||
// extracted from the dragFunction K,
|
||||
// so you MUST divide K by alpha1*alpha2 when implemnting the drag
|
||||
// so you MUST divide K by alpha1*alpha2 when implementing the drag
|
||||
// function
|
||||
// ********************************** NB! *****************************
|
||||
virtual tmp<volScalarField> K(const volScalarField& Ur) const = 0;
|
||||
|
||||
@ -26,7 +26,7 @@ Class
|
||||
|
||||
Description
|
||||
A thermal wall function for simulation of subcooled nucleate wall boiling
|
||||
with runtime selctable submodels for:
|
||||
with runtime selectable submodels for:
|
||||
- wall heat flux partitioning model
|
||||
- nucleation site density
|
||||
- bubble departure frequency
|
||||
@ -86,7 +86,7 @@ Usage
|
||||
departureFreqModel| | yes |
|
||||
\endtable
|
||||
|
||||
NOTE: Runtime selectabale submodels may require model specific entries
|
||||
NOTE: Runtime selectable submodels may require model specific entries
|
||||
|
||||
Example usage:
|
||||
\verbatim
|
||||
|
||||
@ -29,7 +29,7 @@ Description
|
||||
|
||||
SourceFiles
|
||||
departureDiameterModel.C
|
||||
newdepartureDiameterModel.C
|
||||
newDepartureDiameterModel.C
|
||||
|
||||
\*---------------------------------------------------------------------------*/
|
||||
|
||||
|
||||
@ -29,7 +29,7 @@ Description
|
||||
|
||||
SourceFiles
|
||||
departureFrequencyModel.C
|
||||
newdepartureFrequencyModel.C
|
||||
newDepartureFrequencyModel.C
|
||||
|
||||
\*---------------------------------------------------------------------------*/
|
||||
|
||||
|
||||
@ -29,7 +29,7 @@ Description
|
||||
|
||||
SourceFiles
|
||||
nucleationSiteModel.C
|
||||
newnucleationSiteModel.C
|
||||
newNucleationSiteModel.C
|
||||
|
||||
\*---------------------------------------------------------------------------*/
|
||||
|
||||
|
||||
@ -29,7 +29,7 @@ Description
|
||||
|
||||
SourceFiles
|
||||
partitioningModel.C
|
||||
newpartitioningModel.C
|
||||
newPartitioningModel.C
|
||||
|
||||
\*---------------------------------------------------------------------------*/
|
||||
|
||||
|
||||
@ -146,7 +146,7 @@ protected:
|
||||
//- Abscissa type
|
||||
coordinateType coordinateType_;
|
||||
|
||||
//- List of volume-averaged number concentations
|
||||
//- List of volume-averaged number concentrations
|
||||
scalarField N_;
|
||||
|
||||
//- List of volume-averaged surface areas
|
||||
@ -167,7 +167,7 @@ protected:
|
||||
//- Highest moment order
|
||||
label maxOrder_;
|
||||
|
||||
//- Bins (respresentative volume/area/diameter)
|
||||
//- Bins (representative volume/area/diameter)
|
||||
pointField bins_;
|
||||
|
||||
//- Bin component used according to chosen coordinate type
|
||||
|
||||
@ -75,10 +75,10 @@ class nonRandomTwoLiquid
|
||||
//- Name of species 2
|
||||
word species2Name_;
|
||||
|
||||
//- Indiex of species 1 within this thermo
|
||||
//- Index of species 1 within this thermo
|
||||
label species1Index_;
|
||||
|
||||
//- Indiex of species 2 within this thermo
|
||||
//- Index of species 2 within this thermo
|
||||
label species2Index_;
|
||||
|
||||
//- Non-randomness constant parameter for species 1
|
||||
|
||||
@ -71,13 +71,13 @@ class linearTsub
|
||||
//- Reference diameter for low subcooling temperature
|
||||
dimensionedScalar d2_;
|
||||
|
||||
//- Subcooling temperature where low subcooling diamter is reached
|
||||
//- Subcooling temperature where low subcooling diameter is reached
|
||||
dimensionedScalar Tsub2_;
|
||||
|
||||
//- Reference diameter for high subcooling temperature
|
||||
dimensionedScalar d1_;
|
||||
|
||||
//- Subcooling temperature where high subcooling diamter is reached
|
||||
//- Subcooling temperature where high subcooling diameter is reached
|
||||
dimensionedScalar Tsub1_;
|
||||
|
||||
//- Diameter field
|
||||
|
||||
@ -30,7 +30,6 @@ Description
|
||||
|
||||
SourceFiles
|
||||
sinteringModel.C
|
||||
newsinteringModel.C
|
||||
|
||||
\*---------------------------------------------------------------------------*/
|
||||
|
||||
|
||||
@ -30,7 +30,7 @@ Description
|
||||
quite restrictive as it also has to support an equivalent stationary model,
|
||||
which does not store motion fields or a turbulence model.
|
||||
|
||||
Possible future extensions include separating the turbulent fuctionality
|
||||
Possible future extensions include separating the turbulent functionality
|
||||
into another layer.
|
||||
|
||||
See also
|
||||
|
||||
@ -27,7 +27,7 @@ Class
|
||||
Description
|
||||
Class which represents a stationary (and therefore probably solid) phase.
|
||||
Generates, but does not store, zero velocity and flux field and turbulent
|
||||
qauantities. Throws an error when non-const access is requested to the
|
||||
quantities. Throws an error when non-const access is requested to the
|
||||
motion fields or when the momentum equation is requested. Usage must
|
||||
must protect against such calls.
|
||||
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2011-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2011-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -64,7 +64,7 @@ void Foam::sammMesh::calcPointCells() const
|
||||
// the supporting point labels, we need to work based on the cell faces.
|
||||
// This is because some of the faces for meshes with arbitrary interfaces
|
||||
// do not come from the cell shape, but from the slaves of the coupled
|
||||
// match. It is also adventageous to remove the duplicates from the
|
||||
// match. It is also advantageous to remove the duplicates from the
|
||||
// point-cell addressing, because this removes a lot of waste later.
|
||||
//
|
||||
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2011-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2011-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -37,7 +37,7 @@ void Foam::sammMesh::addRegularCell
|
||||
const label nCreatedCells
|
||||
)
|
||||
{
|
||||
// Momory management
|
||||
// Memory management
|
||||
static labelList labelsHex(8);
|
||||
static labelList labelsWedge(7);
|
||||
static labelList labelsPrism(6);
|
||||
|
||||
@ -27,7 +27,7 @@ Class
|
||||
Description
|
||||
A messy mesh class which supports the possibility of creating a shapeMesh
|
||||
for regular Samm meshes (no arbitrary interfaces or collapsed SAMM cells).
|
||||
If any of these special feateres exist, the mesh is created as polyMesh
|
||||
If any of these special features exist, the mesh is created as polyMesh
|
||||
|
||||
SourceFiles
|
||||
sammMesh.C
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2011-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2011-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -64,7 +64,7 @@ void Foam::starMesh::calcPointCells() const
|
||||
// the supporting point labels, we need to work based on the cell faces.
|
||||
// This is because some of the faces for meshes with arbitrary interfaces
|
||||
// do not come from the cell shape, but from the slaves of the coupled
|
||||
// match. It is also adventageous to remove the duplicates from the
|
||||
// match. It is also advantageous to remove the duplicates from the
|
||||
// point-cell addressing, because this removes a lot of waste later.
|
||||
//
|
||||
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2011-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2011-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -31,7 +31,7 @@ Description
|
||||
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
|
||||
|
||||
// Specialist version of face comparison to deal with
|
||||
// PROSTAR boundary format idiosyncracies
|
||||
// PROSTAR boundary format idiosyncrasies
|
||||
bool Foam::starMesh::starEqualFace
|
||||
(
|
||||
const face& boundaryFace,
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2011-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2011-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -993,7 +993,7 @@ void Foam::starMesh::createCoupleMatches()
|
||||
// list of edges to consider. Make sure all edges are
|
||||
// added such that the current point is their start.
|
||||
// Loop through all edges to consider and find the one
|
||||
// which produces the buggest right-hand-turn. This
|
||||
// which produces the biggest right-hand-turn. This
|
||||
// is the next edge to be added to the face. If its
|
||||
// end is the same as the starting point, the face is
|
||||
// complete; resize it to the number of active points
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2011-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2011-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -37,7 +37,7 @@ void Foam::starMesh::addRegularCell
|
||||
const label nCreatedCells
|
||||
)
|
||||
{
|
||||
// Momory management
|
||||
// Memory management
|
||||
static labelList labelsHex(8);
|
||||
static labelList labelsPrism(6);
|
||||
static labelList labelsPyramid(5);
|
||||
|
||||
@ -27,7 +27,7 @@ Class
|
||||
Description
|
||||
A messy mesh class which supports the possibility of creating a shapeMesh
|
||||
for regular Star meshes (no arbitrary interfaces or collapsed SAMM cells).
|
||||
If any of these special feateres exist, the mesh is created as polyMesh
|
||||
If any of these special features exist, the mesh is created as polyMesh
|
||||
|
||||
SourceFiles
|
||||
calcPointCells.C
|
||||
|
||||
@ -709,7 +709,7 @@ void countExtrudePatches
|
||||
}
|
||||
}
|
||||
}
|
||||
// Synchronise decistion. Actual numbers are not important, just make
|
||||
// Synchronise decision. Actual numbers are not important, just make
|
||||
// sure that they're > 0 on all processors.
|
||||
Pstream::listCombineGather(zoneSidePatch, plusEqOp<label>());
|
||||
Pstream::listCombineScatter(zoneSidePatch);
|
||||
@ -2381,7 +2381,7 @@ int main(int argc, char *argv[])
|
||||
meshMod
|
||||
);
|
||||
|
||||
// Enforce actual point posititions according to extrudeModel (model)
|
||||
// Enforce actual point positions according to extrudeModel (model)
|
||||
// (extruder.setRefinement only does fixed expansionRatio)
|
||||
// The regionPoints and nLayers are looped in the same way as in
|
||||
// createShellMesh
|
||||
|
||||
@ -69,8 +69,8 @@ public:
|
||||
|
||||
// Controls
|
||||
|
||||
//- Minimum cell size below which protusions through the surface are
|
||||
// not split
|
||||
//- Minimum cell size below which protrusions through the surface
|
||||
// are not split
|
||||
scalar minCellSize_;
|
||||
|
||||
//- Square of minCellSize
|
||||
@ -114,14 +114,14 @@ public:
|
||||
//- Square of span
|
||||
scalar span2_;
|
||||
|
||||
//- Minimum edge-length of the cell size below which protusions
|
||||
//- Minimum edge-length of the cell size below which protrusions
|
||||
// through the surface are not split
|
||||
scalar minEdgeLen_;
|
||||
|
||||
//- Square of minEdgeLen
|
||||
scalar minEdgeLen2_;
|
||||
|
||||
//- Maximum notch size below which protusions into the surface are
|
||||
//- Maximum notch size below which protrusions into the surface are
|
||||
// not filled
|
||||
scalar maxNotchLen_;
|
||||
|
||||
|
||||
@ -456,7 +456,7 @@ private:
|
||||
|
||||
//- Return false if the line is entirely outside the current processor
|
||||
// domain, true is either point is inside, or the processor domain
|
||||
// bounadry is intersected (i.e. the points are box outside but the
|
||||
// boundary is intersected (i.e. the points are box outside but the
|
||||
// line cuts. The points will be moved onto the box where they
|
||||
// intersect.
|
||||
bool clipLineToProc
|
||||
|
||||
@ -636,7 +636,7 @@ bool Foam::autoDensity::fillBox
|
||||
}
|
||||
|
||||
// Using the sampledPoints as the first test locations as they are
|
||||
// randomly shuffled, but unfiormly sampling space and have wellInside
|
||||
// randomly shuffled, but uniformly sampling space and have wellInside
|
||||
// and size data already
|
||||
|
||||
maxDensity = 1/pow3(max(minCellSize, small));
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2013-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2013-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -773,7 +773,7 @@ void Foam::CV2D::newPoints()
|
||||
if (!is_infinite(ec)) break;
|
||||
} while (++ec != ecStart);
|
||||
|
||||
// Store the start-end of the first non-infinte edge
|
||||
// Store the start-end of the first non-infinite edge
|
||||
point2D de0 = toPoint2D(circumcenter(ec->first));
|
||||
|
||||
// Keep track of the maximum edge length^2
|
||||
|
||||
@ -68,7 +68,7 @@ Description
|
||||
randomiseInitialGrid yes;
|
||||
|
||||
// Perturbation fraction, 1 = cell-size.
|
||||
randomPurturbation 0.1;
|
||||
randomPerturbation 0.1;
|
||||
|
||||
// Number of relaxation iterations.
|
||||
nIterations 5;
|
||||
|
||||
@ -169,14 +169,14 @@ public:
|
||||
|
||||
// Friend Functions
|
||||
|
||||
//- Do the two given vertices consitute a boundary point-pair
|
||||
//- Do the two given vertices constitute a boundary point-pair
|
||||
friend bool pointPair <Gt, Vb>
|
||||
(
|
||||
const indexedVertex<Gt, Vb>& v0,
|
||||
const indexedVertex<Gt, Vb>& v1
|
||||
);
|
||||
|
||||
//- Do the three given vertices consitute a boundary triangle
|
||||
//- Do the three given vertices constitute a boundary triangle
|
||||
friend bool boundaryTriangle <Gt, Vb>
|
||||
(
|
||||
const indexedVertex<Gt, Vb>& v0,
|
||||
@ -184,7 +184,7 @@ public:
|
||||
const indexedVertex<Gt, Vb>& v2
|
||||
);
|
||||
|
||||
//- Do the three given vertices consitute an outside triangle
|
||||
//- Do the three given vertices constitute an outside triangle
|
||||
friend bool outsideTriangle <Gt, Vb>
|
||||
(
|
||||
const indexedVertex<Gt, Vb>& v0,
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2011-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2011-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -1142,7 +1142,7 @@ void Foam::meshDualiser::setRefinement
|
||||
);
|
||||
}
|
||||
// Detect whether different dual cells on either side of a face. This
|
||||
// would neccesitate having a dual face built from the face and thus a
|
||||
// would necessitate having a dual face built from the face and thus a
|
||||
// dual point at the face centre.
|
||||
for (label facei = 0; facei < mesh_.nInternalFaces(); facei++)
|
||||
{
|
||||
@ -1189,7 +1189,7 @@ void Foam::meshDualiser::setRefinement
|
||||
}
|
||||
|
||||
// Detect whether different dual cells on either side of an edge. This
|
||||
// would neccesitate having a dual face built perpendicular to the edge
|
||||
// would necessitate having a dual face built perpendicular to the edge
|
||||
// and thus a dual point at the mid of the edge.
|
||||
// Note: not really true - the face can be built without the edge centre!
|
||||
const labelListList& edgeCells = mesh_.edgeCells();
|
||||
|
||||
@ -185,7 +185,7 @@ class vtkPVblockMesh
|
||||
//- Selected curved edges
|
||||
boolList edgeStatus_;
|
||||
|
||||
//- First instance and size of bleckMesh blocks
|
||||
//- First instance and size of blockMesh blocks
|
||||
// used to index into blockStatus_
|
||||
arrayRange arrayRangeBlocks_;
|
||||
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2011-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2011-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -56,7 +56,7 @@ class tabulatedWallFunction
|
||||
{
|
||||
protected:
|
||||
|
||||
// Proteced data
|
||||
// Protected data
|
||||
|
||||
//- Main dictionary
|
||||
const dictionary dict_;
|
||||
|
||||
@ -446,7 +446,7 @@ void Foam::chemkinReader::addReaction
|
||||
|
||||
|
||||
// Calculate the unit conversion factor for the A coefficient
|
||||
// for the change from mol/cm^3 to kmol/m^3 concentraction units
|
||||
// for the change from mol/cm^3 to kmol/m^3 concentration units
|
||||
const scalar concFactor = 0.001;
|
||||
scalar sumExp = 0.0;
|
||||
forAll(lhs, i)
|
||||
|
||||
@ -118,7 +118,7 @@ surfaceConformation
|
||||
|
||||
// Maximum allowable protrusion through the surface before
|
||||
// conformation points are added - fraction of the local target
|
||||
// cell size. These small protusions are (hopefully) done by mesh filtering
|
||||
// cell size. These small protrusions are (hopefully) done by mesh filtering
|
||||
// instead.
|
||||
maxSurfaceProtrusionCoeff 0.1;
|
||||
|
||||
|
||||
@ -76,7 +76,7 @@ protected:
|
||||
|
||||
// Protected Member Functions
|
||||
|
||||
//- Return the nomalized scalar error
|
||||
//- Return the normalized scalar error
|
||||
scalar normalizeError
|
||||
(
|
||||
const scalarField& y0,
|
||||
|
||||
@ -55,7 +55,7 @@ class adaptiveSolver
|
||||
//- Cache for dydx at the initial time
|
||||
mutable scalarField dydx0_;
|
||||
|
||||
//- Temprorary for the test-step solution
|
||||
//- Temporary for the test-step solution
|
||||
mutable scalarField yTemp_;
|
||||
|
||||
|
||||
|
||||
@ -128,7 +128,7 @@ private:
|
||||
|
||||
// Static data
|
||||
|
||||
//- Relative peturbation tolerance. Determines when point is
|
||||
//- Relative perturbation tolerance. Determines when point is
|
||||
// considered to be close to face/edge of bb of node.
|
||||
// The tolerance is relative to the bounding box of the smallest
|
||||
// node.
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2011-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2011-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -21,7 +21,7 @@ License
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with OpenFOAM. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
InNamspace
|
||||
InNamespace
|
||||
Foam
|
||||
|
||||
Description
|
||||
|
||||
@ -346,7 +346,7 @@ public:
|
||||
};
|
||||
|
||||
//- Return physical processor number (i.e. processor number in
|
||||
// worldComm) given communicator and procssor
|
||||
// worldComm) given communicator and processor
|
||||
static int baseProcNo(const label myComm, const int procID);
|
||||
|
||||
//- Return processor number in communicator (given physical processor
|
||||
|
||||
@ -1119,7 +1119,7 @@ Foam::label Foam::fileOperation::splitProcessorPath
|
||||
|
||||
if (f.size() && f[0] == 's')
|
||||
{
|
||||
// "processsorsNNN"
|
||||
// "processorsNNN"
|
||||
|
||||
f = f.substr(1);
|
||||
|
||||
|
||||
@ -312,7 +312,7 @@ public:
|
||||
// ) const = 0;
|
||||
|
||||
|
||||
// (reg)IOobject functinality
|
||||
// (reg)IOobject functionality
|
||||
|
||||
//- Generate disk file name for object. Opposite of filePath.
|
||||
// Optional wanted typeName.
|
||||
@ -494,7 +494,7 @@ public:
|
||||
virtual void flush() const;
|
||||
|
||||
//- Generate path (like io.path) from root+casename with any
|
||||
// 'processorXXX' replaced by procDir (usually 'processsors')
|
||||
// 'processorXXX' replaced by procDir (usually 'processors')
|
||||
fileName processorsCasePath
|
||||
(
|
||||
const IOobject&,
|
||||
@ -502,7 +502,7 @@ public:
|
||||
) const;
|
||||
|
||||
//- Generate path (like io.path) with provided instance and any
|
||||
// 'processorXXX' replaced by procDir (usually 'processsors')
|
||||
// 'processorXXX' replaced by procDir (usually 'processors')
|
||||
fileName processorsPath
|
||||
(
|
||||
const IOobject&,
|
||||
|
||||
@ -641,7 +641,7 @@ public:
|
||||
// ) const;
|
||||
|
||||
|
||||
// (reg)IOobject functinality
|
||||
// (reg)IOobject functionality
|
||||
|
||||
//- Search for an object. checkGlobal : also check undecomposed case
|
||||
virtual fileName filePath
|
||||
|
||||
@ -108,7 +108,7 @@ Foam::fileName Foam::fileOperations::uncollatedFileOperation::filePathInfo
|
||||
}
|
||||
}
|
||||
|
||||
// Check if parallel "procesors" directory
|
||||
// Check if parallel "processors" directory
|
||||
if (io.time().processorCase())
|
||||
{
|
||||
tmpNrc<dirIndexList> pDirs
|
||||
|
||||
@ -207,7 +207,7 @@ public:
|
||||
// ) const;
|
||||
|
||||
|
||||
// (reg)IOobject functinality
|
||||
// (reg)IOobject functionality
|
||||
|
||||
//- Search for an object. checkGlobal : also check undecomposed case
|
||||
virtual fileName filePath
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2011-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2011-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -235,7 +235,7 @@ void Foam::LduMatrix<Type, DType, LUType>::residual
|
||||
|
||||
// Parallel boundary initialisation.
|
||||
// Note: there is a change of sign in the coupled
|
||||
// interface update to add the contibution to the r.h.s.
|
||||
// interface update to add the contribution to the r.h.s.
|
||||
|
||||
FieldField<Field, LUType> mBouCoeffs(interfacesUpper_.size());
|
||||
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2011-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2011-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -89,7 +89,7 @@ void Foam::TGaussSeidelSmoother<Type, DType, LUType>::smooth
|
||||
// Parallel boundary initialisation. The parallel boundary is treated
|
||||
// as an effective jacobi interface in the boundary.
|
||||
// Note: there is a change of sign in the coupled
|
||||
// interface update to add the contibution to the r.h.s.
|
||||
// interface update to add the contribution to the r.h.s.
|
||||
|
||||
FieldField<Field, LUType> mBouCoeffs(matrix_.interfacesUpper().size());
|
||||
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2013-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2013-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -136,7 +136,7 @@ bool Foam::eagerGAMGProcAgglomeration::agglomerate()
|
||||
)
|
||||
);
|
||||
|
||||
// Use procesor agglomeration maps to do the actual
|
||||
// Use processor agglomeration maps to do the actual
|
||||
// collecting.
|
||||
if (Pstream::myProcNo(levelComm) != -1)
|
||||
{
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2013-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2013-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -183,7 +183,7 @@ bool Foam::manualGAMGProcAgglomeration::agglomerate()
|
||||
)
|
||||
);
|
||||
|
||||
// Use procesor agglomeration maps to do the actual
|
||||
// Use processor agglomeration maps to do the actual
|
||||
// collecting
|
||||
if (Pstream::myProcNo(levelMesh.comm()) != -1)
|
||||
{
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2013-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2013-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -123,7 +123,7 @@ bool Foam::masterCoarsestGAMGProcAgglomeration::agglomerate()
|
||||
)
|
||||
);
|
||||
|
||||
// Use procesor agglomeration maps to do the actual collecting.
|
||||
// Use processor agglomeration maps to do the actual collecting.
|
||||
if (Pstream::myProcNo(levelComm) != -1)
|
||||
{
|
||||
GAMGProcAgglomeration::agglomerate
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2013-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2013-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -303,7 +303,7 @@ bool Foam::procFacesGAMGProcAgglomeration::agglomerate()
|
||||
);
|
||||
|
||||
|
||||
// Use procesor agglomeration maps to do the actual
|
||||
// Use processor agglomeration maps to do the actual
|
||||
// collecting.
|
||||
GAMGProcAgglomeration::agglomerate
|
||||
(
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2013-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2013-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -384,7 +384,7 @@ Foam::lduPrimitiveMesh::lduPrimitiveMesh
|
||||
const lduInterfacePtrsList interfaces =
|
||||
mesh(myMesh, otherMeshes, procMeshI).interfaces();
|
||||
|
||||
// Inialise all boundaries as merged
|
||||
// Initialise all boundaries as merged
|
||||
boundaryMap[procMeshI].setSize(interfaces.size(), -1);
|
||||
boundaryFaceMap[procMeshI].setSize(interfaces.size());
|
||||
|
||||
|
||||
@ -135,7 +135,7 @@ public:
|
||||
//- Return interpolated addressing
|
||||
virtual const labelListList& addressing() const;
|
||||
|
||||
//- Return interpolaion weights
|
||||
//- Return interpolation weights
|
||||
virtual const scalarListList& weights() const;
|
||||
|
||||
//- Are there any inserted points
|
||||
|
||||
@ -143,7 +143,7 @@ public:
|
||||
//- Return interpolated addressing
|
||||
virtual const labelListList& addressing() const;
|
||||
|
||||
//- Return interpolaion weights
|
||||
//- Return interpolation weights
|
||||
virtual const scalarListList& weights() const;
|
||||
|
||||
|
||||
|
||||
@ -134,7 +134,7 @@ public:
|
||||
//- Return interpolated addressing
|
||||
virtual const labelListList& addressing() const;
|
||||
|
||||
//- Return interpolaion weights
|
||||
//- Return interpolation weights
|
||||
virtual const scalarListList& weights() const;
|
||||
|
||||
//- Are there any inserted cells
|
||||
|
||||
@ -138,7 +138,7 @@ public:
|
||||
//- Return interpolated addressing
|
||||
virtual const labelListList& addressing() const;
|
||||
|
||||
//- Return interpolaion weights
|
||||
//- Return interpolation weights
|
||||
virtual const scalarListList& weights() const;
|
||||
|
||||
//- Return flux flip map
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2011-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2011-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -148,7 +148,7 @@ Foam::vector Foam::eigenVector
|
||||
scalar sd0, sd1, sd2;
|
||||
scalar magSd0, magSd1, magSd2;
|
||||
|
||||
// Sub-determinants for a unique eivenvalue
|
||||
// Sub-determinants for a unique eigenvalue
|
||||
sd0 = A.yy()*A.zz() - A.yz()*A.zy();
|
||||
sd1 = A.zz()*A.xx() - A.zx()*A.xz();
|
||||
sd2 = A.xx()*A.yy() - A.xy()*A.yx();
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2011-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2011-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -21,7 +21,7 @@ License
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with OpenFOAM. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
InNamspace
|
||||
InNamespace
|
||||
Foam
|
||||
|
||||
Description
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2012-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2012-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -21,7 +21,7 @@ License
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with OpenFOAM. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
InNamspace
|
||||
InNamespace
|
||||
Foam
|
||||
|
||||
Description
|
||||
|
||||
@ -38,7 +38,7 @@ Description
|
||||
<magSfN> <valueN> <qDotN> <htcN>
|
||||
\endverbatim
|
||||
|
||||
and received as the constituent pieces of the `mixed' condition, i.e.
|
||||
and received as the constitutent pieces of the `mixed' condition, i.e.
|
||||
|
||||
\verbatim
|
||||
# Patch: <patch name>
|
||||
|
||||
@ -38,8 +38,8 @@ Description
|
||||
where
|
||||
|
||||
\vartable
|
||||
\alpha_t| turblence thermal diffusivity
|
||||
\mu_t | turblence viscosity
|
||||
\alpha_t| turbulence thermal diffusivity
|
||||
\mu_t | turbulence viscosity
|
||||
Pr_t | turblent Prandtl number
|
||||
\endvartable
|
||||
|
||||
|
||||
@ -35,8 +35,8 @@ Description
|
||||
where
|
||||
|
||||
\vartable
|
||||
epsilon | turblence dissipation field
|
||||
G | turblence generation field
|
||||
epsilon | turbulence dissipation field
|
||||
G | turbulence generation field
|
||||
\endvartable
|
||||
|
||||
The model switches between laminar and turbulent functions based on the
|
||||
|
||||
@ -38,7 +38,7 @@ Description
|
||||
pc is considered from the IFC solution.
|
||||
omegaFuelBar is calculated solving a relaxation equation which tends to
|
||||
omegaEq. This omegaEq is obtained from the flamelet solution for
|
||||
different strain rates and fit using a expential distribution.
|
||||
different strain rates and fit using a exponential distribution.
|
||||
|
||||
The spacial distribution of the consumption speed (omega) is obtained also
|
||||
from a strained flamelet solution and it is assumed to have a gaussian
|
||||
@ -93,7 +93,7 @@ class FSD
|
||||
//- Fuel mass concentration on the fuel stream
|
||||
dimensionedScalar YFuelFuelStream_;
|
||||
|
||||
//- Oxygen mass concentration on the oxydizer stream
|
||||
//- Oxygen mass concentration on the oxidizer stream
|
||||
dimensionedScalar YO2OxiStream_;
|
||||
|
||||
//- Similarity constant for the sub-grid ft fluctuations
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2011-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2011-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -624,7 +624,7 @@ Body:
|
||||
|
||||
where boundaryType is truncated to 4 characters from one of the following:
|
||||
INLET
|
||||
PRESSSURE
|
||||
PRESSURE
|
||||
OUTLET
|
||||
BAFFLE
|
||||
etc,
|
||||
|
||||
@ -848,7 +848,7 @@ void Foam::boundaryMesh::writeTriSurface(const fileName& fName) const
|
||||
|
||||
// Get index in this (boundaryMesh) of face nearest to each boundary face in
|
||||
// pMesh.
|
||||
// Origininally all triangles/faces of boundaryMesh would be bunged into
|
||||
// Originally all triangles/faces of boundaryMesh would be bunged into
|
||||
// one big octree. Problem was that faces on top of each other, differing
|
||||
// only in sign of normal, could not be found separately. It would always
|
||||
// find only one. We could detect that it was probably finding the wrong one
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2011-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2011-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -520,7 +520,7 @@ Foam::multiDirRefinement::multiDirRefinement
|
||||
}
|
||||
|
||||
|
||||
// Construct from directionary and directions to refine.
|
||||
// Construct from dictionary and directions to refine.
|
||||
Foam::multiDirRefinement::multiDirRefinement
|
||||
(
|
||||
polyMesh& mesh,
|
||||
|
||||
@ -255,7 +255,7 @@ Foam::displacementLayeredMotionMotionSolver::faceZoneEvaluate
|
||||
}
|
||||
else if (type == "uniformFollow")
|
||||
{
|
||||
// Reads name of name of patch. Then get average point dislacement on
|
||||
// Reads name of name of patch. Then get average point displacement on
|
||||
// patch. That becomes the value of fld.
|
||||
const word patchName(dict.lookup("patch"));
|
||||
label patchID = mesh().boundaryMesh().findPatchID(patchName);
|
||||
|
||||
@ -67,7 +67,7 @@ class rotatingMotion
|
||||
//- Axis vector
|
||||
const vector axis_;
|
||||
|
||||
//- Angular velocty (rad/sec)
|
||||
//- Angular velocity (rad/sec)
|
||||
autoPtr<Function1<scalar>> omega_;
|
||||
|
||||
|
||||
|
||||
@ -247,7 +247,7 @@ public:
|
||||
return owner_;
|
||||
}
|
||||
|
||||
//- Return neighour cell
|
||||
//- Return neighbour cell
|
||||
label neighbour() const
|
||||
{
|
||||
return neighbour_;
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2011-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2011-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -104,7 +104,7 @@ void Foam::duplicatePoints::setRefinement
|
||||
|
||||
|
||||
|
||||
// Modfify faces according to face region
|
||||
// Modify faces according to face region
|
||||
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
face newFace;
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2012-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2012-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -449,7 +449,7 @@ void Foam::tetDecomposer::setRefinement
|
||||
label nextFp = f.fcIndex(fp);
|
||||
|
||||
|
||||
// Triangle triI consisiting of f[fp0], f[fp], f[nextFp]
|
||||
// Triangle triI consisting of f[fp0], f[fp], f[nextFp]
|
||||
|
||||
|
||||
// 1. Front triangle (decomposition of face itself)
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2011-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2011-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -384,7 +384,7 @@ void Foam::slidingInterface::coupleInterface(polyTopoChange& ref) const
|
||||
// cutPointEdgePairMap
|
||||
|
||||
// Note. "Processing slave edges" code is repeated twice in the
|
||||
// sliding intergace coupling in order to allow the point
|
||||
// sliding interface coupling in order to allow the point
|
||||
// projection to be done separately from the actual cutting.
|
||||
// Please change consistently with slidingInterfaceProjectPoints.C
|
||||
//
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2011-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2011-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -729,7 +729,7 @@ bool Foam::slidingInterface::projectPoints() const
|
||||
scalarField masterPointEdgeDist(masterLocalPoints.size(), great);
|
||||
|
||||
// Note. "Processing slave edges" code is repeated twice in the
|
||||
// sliding intergace coupling in order to allow the point
|
||||
// sliding interface coupling in order to allow the point
|
||||
// projection to be done separately from the actual cutting.
|
||||
// Please change consistently with coupleSlidingInterface.C
|
||||
//
|
||||
|
||||
@ -104,7 +104,7 @@ class MRFZone
|
||||
//- Axis vector
|
||||
vector axis_;
|
||||
|
||||
//- Angular velocty (rad/sec)
|
||||
//- Angular velocity (rad/sec)
|
||||
autoPtr<Function1<scalar>> omega_;
|
||||
|
||||
|
||||
|
||||
@ -81,7 +81,7 @@ protected:
|
||||
//- Axis of rotation, a direction vector which passes through the origin
|
||||
vector axis_;
|
||||
|
||||
//- SRF model coeficients dictionary
|
||||
//- SRF model coefficients dictionary
|
||||
dictionary SRFModelCoeffs_;
|
||||
|
||||
//- Angular velocity of the frame (rad/s)
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2011-2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2011-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -76,7 +76,7 @@ bool Foam::setRefCell
|
||||
label sumHasRef = returnReduce<label>(hasRef, sumOp<label>());
|
||||
|
||||
// If reference cell no found use octree search
|
||||
// with cell tet-decompositoin
|
||||
// with cell tet-decomposition
|
||||
if (sumHasRef != 1)
|
||||
{
|
||||
refCelli = field.mesh().findCell(refPointi);
|
||||
|
||||
@ -153,10 +153,10 @@ public:
|
||||
//- Return true if all convergence checks are satisfied
|
||||
virtual bool criteriaSatisfied() const = 0;
|
||||
|
||||
//- Flag to indicate whether convergance has been reached
|
||||
//- Flag to indicate whether convergence has been reached
|
||||
bool converged();
|
||||
|
||||
//- End the run if convergance has been reached
|
||||
//- End the run if convergence has been reached
|
||||
bool endIfConverged(Time& time);
|
||||
|
||||
|
||||
|
||||
@ -72,8 +72,8 @@ protected:
|
||||
// than PISO mode
|
||||
bool simpleRho_;
|
||||
|
||||
//- Flag to control whether turblence is solved just on the final pimple
|
||||
// iteration, or on every pimple iteration
|
||||
//- Flag to control whether turbulence is solved just on the final
|
||||
// pimple iteration, or on every pimple iteration
|
||||
bool turbOnFinalIterOnly_;
|
||||
|
||||
|
||||
|
||||
@ -25,7 +25,7 @@ Class
|
||||
Foam::calculatedFvPatchField
|
||||
|
||||
Description
|
||||
This boundary condition is not designed to be evaluated; it is assmued
|
||||
This boundary condition is not designed to be evaluated; it is assumed
|
||||
that the value is assigned via field assignment, and not via a call to
|
||||
e.g. \c updateCoeffs or \c evaluate.
|
||||
|
||||
|
||||
@ -40,7 +40,7 @@ Usage
|
||||
|
||||
Note
|
||||
The outer boundary of the patch pairs must be similar, i.e. if the owner
|
||||
patch is transformed to the neighbour patch, the outer perimiter of each
|
||||
patch is transformed to the neighbour patch, the outer perimeter of each
|
||||
patch should be identical (or very similar).
|
||||
|
||||
See also
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
========= |
|
||||
\\ / F ield | OpenFOAM: The Open Source CFD Toolbox
|
||||
\\ / O peration | Website: https://openfoam.org
|
||||
\\ / A nd | Copyright (C) 2018 OpenFOAM Foundation
|
||||
\\ / A nd | Copyright (C) 2018-2019 OpenFOAM Foundation
|
||||
\\/ M anipulation |
|
||||
-------------------------------------------------------------------------------
|
||||
License
|
||||
@ -40,7 +40,7 @@ Usage
|
||||
|
||||
Note
|
||||
The outer boundary of the patch pairs must be similar, i.e. if the owner
|
||||
patch is transformed to the neighbour patch, the outer perimiter of each
|
||||
patch is transformed to the neighbour patch, the outer perimeter of each
|
||||
patch should be identical (or very similar).
|
||||
|
||||
See also
|
||||
|
||||
@ -35,7 +35,7 @@ Usage
|
||||
Property | Description | Required | Default value
|
||||
phi | flux field name | no | phi
|
||||
tangentialVelocity | tangential velocity field | no |
|
||||
omega | angular velocty of the frame [rad/s] | yes |
|
||||
omega | angular velocity of the frame [rad/s] | yes |
|
||||
\endtable
|
||||
|
||||
Example of the boundary condition specification:
|
||||
|
||||
@ -37,7 +37,7 @@ Usage
|
||||
psi | compressibility field name | no | none
|
||||
gamma | ratio of specific heats (Cp/Cv) | yes |
|
||||
p0 | static pressure reference | yes |
|
||||
omega | angular velocty of the frame [rad/s] | yes |
|
||||
omega | angular velocity of the frame [rad/s] | yes |
|
||||
\endtable
|
||||
|
||||
Example of the boundary condition specification:
|
||||
|
||||
@ -32,7 +32,7 @@ Usage
|
||||
Property | Description | Required | Default value
|
||||
origin | origin of rotation in Cartesian co-ordinates | yes|
|
||||
axis | axis of rotation | yes |
|
||||
omega | angular velocty of the frame [rad/s] | yes |
|
||||
omega | angular velocity of the frame [rad/s] | yes |
|
||||
\endtable
|
||||
|
||||
Example of the boundary condition specification:
|
||||
|
||||
@ -26,7 +26,7 @@ Class
|
||||
|
||||
Description
|
||||
This boundary condition provides a velocity boundary condition for
|
||||
multphase flow based on a user-specified volumetric flow rate.
|
||||
multiphase flow based on a user-specified volumetric flow rate.
|
||||
|
||||
The flow rate is made proportional to the phase fraction alpha at each
|
||||
face of the patch and alpha is ensured to be bound between 0 and 1.
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user