The time step adjustment now starts from the minimum of the deltaT
calculated from Courant condition (and other physical limits), and the
deltaT specified in the system/controlDict.
This means that a small deltaT setting in system/controlDict results in
a gradual increase up to the Courant number limited value. This can be
useful in maintaining stability at the start of a simulation.
This functionality is an accidental side-effect at best. It is being
reinstated as existing cases are reliant upon it. If additional control
of the time step in the initial stages of a simulation is needed, then
that should be achieved with a more explicit user control.
executed with foamRun for single region simulations of foamMultiRun for
multi-region simulations. Replaces pimpleFoam, pisoFoam and simpleFoam and all
the corresponding tutorials have been updated and moved to
tutorials/modules/incompressibleFluid.
Class
Foam::solvers::incompressibleFluid
Description
Solver module for steady or transient turbulent flow of incompressible
isothermal fluids with optional mesh motion and change.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Optional fvModels and fvConstraints are provided to enhance the simulation
in many ways including adding various sources, constraining or limiting
the solution.
Reference:
\verbatim
Greenshields, C. J., & Weller, H. G. (2022).
Notes on Computational Fluid Dynamics: General Principles.
CFD Direct Ltd.: Reading, UK.
\endverbatim
SourceFiles
incompressibleFluid.C
See also
Foam::solvers::fluidSolver
Foam::solvers::isothermalFluid
to avoid name clash with the VoF surfaceTensionModels when both the
multiphaseEulerFoam and compressibleInterFoam libraries are linked into a single
executable.
The new solver modules cannot provide the equivalent functionality of the -list
options available in the solver applications so foamToC has been developed as a
better, more general and flexible alternative, providing a means to print any or
all run-time selection tables in any or all libraries and search the tables for
any particular entries and print which library files the corresponding tables
are in, e.g.
foamToC -solver fluid -table fvPatchScalarField
Contents of table fvPatchScalarField, base type fvPatchField:
advective libfiniteVolume.so
calculated libfiniteVolume.so
codedFixedValue libfiniteVolume.so
codedMixed libfiniteVolume.so
compressible::alphatJayatillekeWallFunctionlibthermophysicalTransportModels.so
compressible::alphatWallFunction libthermophysicalTransportModels.so
compressible::thermalBaffle1D<eConstSolidThermoPhysics>libthermophysicalTransportModels.so
compressible::thermalBaffle1D<ePowerSolidThermoPhysics>libthermophysicalTransportModels.so
compressible::turbulentTemperatureCoupledBaffleMixedlibthermophysicalTransportModels.so
compressible::turbulentTemperatureRadCoupledMixedlibthermophysicalTransportModels.so
.
.
.
foamToC -solver fluid -search compressible::alphatWallFunction
compressible::alphatWallFunction is in tables
fvPatchField
fvPatchScalarField libthermophysicalTransportModels.so
and the very useful -allLibs option allows ALL libraries to be searched to find
in which table and which library file a particular model in in for example:
foamToC -allLibs -search phaseTurbulenceStabilisation
Loading libraries:
libtwoPhaseSurfaceTension.so
libcv2DMesh.so
libODE.so
.
.
.
phaseTurbulenceStabilisation is in tables
fvModel libmultiphaseEulerFoamFvModels.so
Application
foamToC
Description
Run-time selection table of contents printing and interrogation.
The run-time selection tables are populated by the optionally specified
solver class and any additional libraries listed in the \c -libs option or
all libraries using the \c -allLibs option. Once populated the tables can
be searched and printed by a range of options listed below. Table entries
are printed with the corresponding library they are in to aid selection
and the addition of \c libs entries to ensure availability to the solver.
Usage
\b foamToC [OPTION]
- \par -solver \<name\>
Specify the solver class
- \par -libs '(\"lib1.so\" ... \"libN.so\")'
Specify the additional libraries to load
- \par -allLibs
Load all libraries
- \par switches,
List all available debug, info and optimisation switches
- \par all,
List the contents of all the run-time selection tables
- \par tables
List the run-time selection table names (this is the default action)
- \par table \<name\>
List the contents of the specified table or the list sub-tables
- \par search \<name\>
Search for and list the tables containing the given entry
- \par scalarBCs,
List scalar field boundary conditions (fvPatchField<scalar>)
- \par vectorBCs,
List vector field boundary conditions (fvPatchField<vector>)
- \par functionObjects,
List functionObjects
- \par fvModels,
List fvModels
- \par fvConstraints,
List fvConstraints
Example usage:
- Print the list of scalar boundary conditions (fvPatchField<scalar>)
provided by the \c fluid solver without additional libraries:
\verbatim
foamToC -solver fluid -scalarBCs
\endverbatim
- Print the list of RAS momentum transport models provided by the
\c fluid solver:
\verbatim
foamToC -solver fluid -table RAScompressibleMomentumTransportModel
\endverbatim
- Print the list of functionObjects provided by the
\c multicomponentFluid solver with the libfieldFunctionObjects.so
library:
\verbatim
foamToC -solver multicomponentFluid \
-libs '("libfieldFunctionObjects.so")' -functionObjects
\endverbatim
- Print a complete list of all run-time selection tables:
\verbatim
foamToC -allLibs -tables
or
foamToC -allLibs
\endverbatim
- Print a complete list of all entries in all run-time selection tables:
\verbatim
foamToC -allLibs -all
\endverbatim
Application
foamPostProcess
Description
Execute the set of functionObjects specified in the selected dictionary
(which defaults to system/controlDict) or on the command-line for the
selected set of times on the selected set of fields.
The functionObjects are either executed directly or for the solver
optionally specified as a command-line argument.
Usage
\b foamPostProcess [OPTION]
- \par -dict <file>
Read control dictionary from specified location
- \par -solver <name>
Solver name
- \par -libs '(\"lib1.so\" ... \"libN.so\")'
Specify the additional libraries loaded
-\par -region <name>
Specify the region
- \par -func <name>
Specify the name of the functionObject to execute, e.g. Q
- \par -funcs <list>
Specify the names of the functionObjects to execute, e.g. '(Q div(U))'
- \par -field <name>
Specify the name of the field to be processed, e.g. U
- \par -fields <list>
Specify a list of fields to be processed,
e.g. '(U T p)' - regular expressions not currently supported
- \par -time <ranges>
comma-separated time ranges - eg, ':10,20,40:70,1000:'
- \par -latestTime
Select the latest time
- \par -list
List the available configured functionObjects
Example usage:
- Print the list of available configured functionObjects:
\verbatim
foamPostProcess -list
\endverbatim
- Execute the functionObjects specified in the controlDict of the
fluid region for all the available times:
\verbatim
foamPostProcess -region fluid
\endverbatim
- Execute the functionObjects specified in the controlDict
for the 'fluid' solver in the 'cooling' region for the latest time only:
\verbatim
foamPostProcess -solver fluid -region cooling -latestTime
\endverbatim
A postProcess redirection script is provided for backward-compatibility.
in which different solver modules can be selected in each region to for complex
conjugate heat-transfer and other combined physics problems such as FSI
(fluid-structure interaction).
For single-region simulations the solver module is selected, instantiated and
executed in the PIMPLE loop in the new foamRun application.
For multi-region simulations the set of solver modules, one for each region, are
selected, instantiated and executed in the multi-region PIMPLE loop of new the
foamMultiRun application.
This provides a very general, flexible and extensible framework for complex
coupled problems by creating more solver modules, either by converting existing
solver applications or creating new ones.
The current set of solver modules provided are:
isothermalFluid
Solver module for steady or transient turbulent flow of compressible
isothermal fluids with optional mesh motion and mesh topology changes.
Created from the rhoSimpleFoam, rhoPimpleFoam and buoyantFoam solvers but
without the energy equation, hence isothermal. The buoyant pressure
formulation corresponding to the buoyantFoam solver is selected
automatically by the presence of the p_rgh pressure field in the start-time
directory.
fluid
Solver module for steady or transient turbulent flow of compressible fluids
with heat-transfer for HVAC and similar applications, with optional
mesh motion and mesh topology changes.
Derived from the isothermalFluid solver module with the addition of the
energy equation from the rhoSimpleFoam, rhoPimpleFoam and buoyantFoam
solvers, thus providing the equivalent functionality of these three solvers.
multicomponentFluid
Solver module for steady or transient turbulent flow of compressible
reacting fluids with optional mesh motion and mesh topology changes.
Derived from the isothermalFluid solver module with the addition of
multicomponent thermophysical properties energy and specie mass-fraction
equations from the reactingFoam solver, thus providing the equivalent
functionality in reactingFoam and buoyantReactingFoam. Chemical reactions
and/or combustion modelling may be optionally selected to simulate reacting
systems including fires, explosions etc.
solid
Solver module for turbulent flow of compressible fluids for conjugate heat
transfer, HVAC and similar applications, with optional mesh motion and mesh
topology changes.
The solid solver module may be selected in solid regions of a CHT case, with
either the fluid or multicomponentFluid solver module in the fluid regions
and executed with foamMultiRun to provide functionality equivalent
chtMultiRegionFoam but in a flexible and extensible framework for future
extension to more complex coupled problems.
All the usual fvModels, fvConstraints, functionObjects etc. are available with
these solver modules to support simulations including body-forces, local sources,
Lagrangian clouds, liquid films etc. etc.
Converting compressibleInterFoam and multiphaseEulerFoam into solver modules
would provide a significant enhancement to the CHT capability and incompressible
solvers like pimpleFoam run in conjunction with solidDisplacementFoam in
foamMultiRun would be useful for a range of FSI problems. Many other
combinations of existing solvers converted into solver modules could prove
useful for a very wide range of complex combined physics simulations.
All tutorials from the rhoSimpleFoam, rhoPimpleFoam, buoyantFoam, reactingFoam,
buoyantReactingFoam and chtMultiRegionFoam solver applications replaced by
solver modules have been updated and moved into the tutorials/modules directory:
modules
├── CHT
│ ├── coolingCylinder2D
│ ├── coolingSphere
│ ├── heatedDuct
│ ├── heatExchanger
│ ├── reverseBurner
│ └── shellAndTubeHeatExchanger
├── fluid
│ ├── aerofoilNACA0012
│ ├── aerofoilNACA0012Steady
│ ├── angledDuct
│ ├── angledDuctExplicitFixedCoeff
│ ├── angledDuctLTS
│ ├── annularThermalMixer
│ ├── BernardCells
│ ├── blockedChannel
│ ├── buoyantCavity
│ ├── cavity
│ ├── circuitBoardCooling
│ ├── decompressionTank
│ ├── externalCoupledCavity
│ ├── forwardStep
│ ├── helmholtzResonance
│ ├── hotRadiationRoom
│ ├── hotRadiationRoomFvDOM
│ ├── hotRoom
│ ├── hotRoomBoussinesq
│ ├── hotRoomBoussinesqSteady
│ ├── hotRoomComfort
│ ├── iglooWithFridges
│ ├── mixerVessel2DMRF
│ ├── nacaAirfoil
│ ├── pitzDaily
│ ├── prism
│ ├── shockTube
│ ├── squareBend
│ ├── squareBendLiq
│ └── squareBendLiqSteady
└── multicomponentFluid
├── aachenBomb
├── counterFlowFlame2D
├── counterFlowFlame2D_GRI
├── counterFlowFlame2D_GRI_TDAC
├── counterFlowFlame2DLTS
├── counterFlowFlame2DLTS_GRI_TDAC
├── cylinder
├── DLR_A_LTS
├── filter
├── hotBoxes
├── membrane
├── parcelInBox
├── rivuletPanel
├── SandiaD_LTS
├── simplifiedSiwek
├── smallPoolFire2D
├── smallPoolFire3D
├── splashPanel
├── verticalChannel
├── verticalChannelLTS
└── verticalChannelSteady
Also redirection scripts are provided for the replaced solvers which call
foamRun -solver <solver module name> or foamMultiRun in the case of
chtMultiRegionFoam for backward-compatibility.
Documentation for foamRun and foamMultiRun:
Application
foamRun
Description
Loads and executes an OpenFOAM solver module either specified by the
optional \c solver entry in the \c controlDict or as a command-line
argument.
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Usage
\b foamRun [OPTION]
- \par -solver <name>
Solver name
- \par -libs '(\"lib1.so\" ... \"libN.so\")'
Specify the additional libraries loaded
Example usage:
- To run a \c rhoPimpleFoam case by specifying the solver on the
command line:
\verbatim
foamRun -solver fluid
\endverbatim
- To update and run a \c rhoPimpleFoam case add the following entries to
the controlDict:
\verbatim
application foamRun;
solver fluid;
\endverbatim
then execute \c foamRun
Application
foamMultiRun
Description
Loads and executes an OpenFOAM solver modules for each region of a
multiregion simulation e.g. for conjugate heat transfer.
The region solvers are specified in the \c regionSolvers dictionary entry in
\c controlDict, containing a list of pairs of region and solver names,
e.g. for a two region case with one fluid region named
liquid and one solid region named tubeWall:
\verbatim
regionSolvers
{
liquid fluid;
tubeWall solid;
}
\endverbatim
The \c regionSolvers entry is a dictionary to support name substitutions to
simplify the specification of a single solver type for a set of
regions, e.g.
\verbatim
fluidSolver fluid;
solidSolver solid;
regionSolvers
{
tube1 $fluidSolver;
tubeWall1 solid;
tube2 $fluidSolver;
tubeWall2 solid;
tube3 $fluidSolver;
tubeWall3 solid;
}
\endverbatim
Uses the flexible PIMPLE (PISO-SIMPLE) solution for time-resolved and
pseudo-transient and steady simulations.
Usage
\b foamMultiRun [OPTION]
- \par -libs '(\"lib1.so\" ... \"libN.so\")'
Specify the additional libraries loaded
Example usage:
- To update and run a \c chtMultiRegion case add the following entries to
the controlDict:
\verbatim
application foamMultiRun;
regionSolvers
{
fluid fluid;
solid solid;
}
\endverbatim
then execute \c foamMultiRun
Full backward-compatibility is provided which support for both multiComponentMixture and
multiComponentPhaseModel provided but all tutorials have been updated.
Now that the reaction system, chemistry and combustion models are completely
separate from the multicomponent mixture thermophysical properties package that
supports them it is inconsistent that thermo is named reactionThermo and the
name multicomponentThermo better describes the purpose and functionality.
This has required implementation of finer control of stitching in the
fvMesh read constructor and readUpdate methods. Stitching is now
controlled independently of the mesh changers. Full-geometric stitching
is now always the default unless explicitly overridden in the calls to
fvMesh's read methods.
If a "patch" selection is made for a cyclic patch, surfaceFieldValue now
also selects faces on any associated processor cyclic patches. This
ensures that the serial and parallel operations are equivalent.
Points now always get decomposed or reconstructed for the initial face
instance. This means that they are available in the constant directory
even if decomposition/reconstruction begins at a later time which has
its own moved points field.
The cellProc field is the field of cell-processor labels.
The names "distribution" and "dist" have been removed as these are
ambiguous in relation to other forms of distribution and to distance.
The reconstructPar utility now reconstructs the mesh if and when it is
necessary to do so. The reconstructParMesh utility is therefore no
longer necessary and has been removed.
It was necessary/advantagous to consolidate these utilities into one
because in the case of mesh changes it becomes increasingly less clear
which of the separate utilities is responsible for reconstructing data
that is neither clearly physical field nor mesh topology; e.g., moving
points, sets, refinement data, and so on.
This is so that when an executable is removed and replaced by a
placeholder script, a pull, re-build and run now launches the script
rather than an out-of-date executable.
When this option is enabled, non-conformal boundary conditions will be
added to all the fields. It enables exactly the same behaviour as the
"fields" entry that is available when using this utility with a settings
dictionary (system/createNonConformalCouplesDict).
