avoiding problems with mesh generation, pre/post-processing applications
etc. triggering inappropriate changes to the moving and topoChanged states which
are only needed for updates in solvers corresponding to mesh changes.
The topoChanged flag now indicates that the mesh topology has changed at the
start of the current time-step rather than it is changing during the run, for
subsequent time-steps without topology change it is set false until the next
topology change.
This major development provides coupling of patches which are
non-conformal, i.e. where the faces of one patch do not match the faces
of the other. The coupling is fully conservative and second order
accurate in space, unlike the Arbitrary Mesh Interface (AMI) and
associated ACMI and Repeat AMI methods which NCC replaces.
Description:
A non-conformal couple is a connection between a pair of boundary
patches formed by projecting one patch onto the other in a way that
fills the space between them. The intersection between the projected
surface and patch forms new faces that are incorporated into the finite
volume mesh. These new faces are created identically on both sides of
the couple, and therefore become equivalent to internal faces within the
mesh. The affected cells remain closed, meaning that the area vectors
sum to zero for all the faces of each cell. Consequently, the main
benefits of the finite volume method, i.e. conservation and accuracy,
are not undermined by the coupling.
A couple connects parts of mesh that are otherwise disconnected and can
be used in the following ways:
+ to simulate rotating geometries, e.g. a propeller or stirrer, in which
a part of the mesh rotates with the geometry and connects to a
surrounding mesh which is not moving;
+ to connect meshes that are generated separately, which do not conform
at their boundaries;
+ to connect patches which only partially overlap, in which the
non-overlapped section forms another boundary, e.g. a wall;
+ to simulate a case with a geometry which is periodically repeating by
creating multiple couples with different transformations between
patches.
The capability for simulating partial overlaps replaces the ACMI
functionality, currently provided by the 'cyclicACMI' patch type, and
which is unreliable unless the couple is perfectly flat. The capability
for simulating periodically repeating geometry replaces the Repeat AMI
functionality currently provided by the 'cyclicRepeatAMI' patch type.
Usage:
The process of meshing for NCC is very similar to existing processes for
meshing for AMI. Typically, a mesh is generated with an identifiable set
of internal faces which coincide with the surface through which the mesh
will be coupled. These faces are then duplicated by running the
'createBaffles' utility to create two boundary patches. The points are
then split using 'splitBaffles' in order to permit independent motion of
the patches.
In AMI, these patches are assigned the 'cyclicAMI' patch type, which
couples them using AMI interpolation methods.
With NCC, the patches remain non-coupled, e.g. a 'wall' type. Coupling
is instead achieved by running the new 'createNonConformalCouples'
utility, which creates additional coupled patches of type
'nonConformalCyclic'. These appear in the 'constant/polyMesh/boundary'
file with zero faces; they are populated with faces in the finite volume
mesh during the connection process in NCC.
For a single couple, such as that which separates the rotating and
stationary sections of a mesh, the utility can be called using the
non-coupled patch names as arguments, e.g.
createNonConformalCouples -overwrite rotatingZoneInner rotatingZoneOuter
where 'rotatingZoneInner' and 'rotatingZoneOuter' are the names of the
patches.
For multiple couples, and/or couples with transformations,
'createNonConformalCouples' should be run without arguments. Settings
will then be read from a configuration file named
'system/createNonConformalCouplesDict'. See
'$FOAM_ETC/caseDicts/annotated/createNonConformalCouplesDict' for
examples.
Boundary conditions must be specified for the non-coupled patches. For a
couple where the patches fully overlap, boundary conditions
corresponding to a slip wall are typically applied to fields, i.e
'movingWallSlipVelocity' (or 'slip' if the mesh is stationary) for
velocity U, 'zeroGradient' or 'fixedFluxPressure' for pressure p, and
'zeroGradient' for other fields. For a couple with
partially-overlapping patches, boundary conditions are applied which
physically represent the non-overlapped region, e.g. a no-slip wall.
Boundary conditions also need to be specified for the
'nonConformalCyclic' patches created by 'createNonConformalCouples'. It
is generally recommended that this is done by including the
'$FOAM_ETC/caseDicts/setConstraintTypes' file in the 'boundaryField'
section of each of the field files, e.g.
boundaryField
{
#includeEtc "caseDicts/setConstraintTypes"
inlet
{
...
}
...
}
For moving mesh cases, it may be necessary to correct the mesh fluxes
that are changed as a result of the connection procedure. If the
connected patches do not conform perfectly to the mesh motion, then
failure to correct the fluxes can result in noise in the pressure
solution.
Correction for the mesh fluxes is enabled by the 'correctMeshPhi' switch
in the 'PIMPLE' (or equivalent) section of 'system/fvSolution'. When it
is enabled, solver settings are required for 'MeshPhi'. The solution
just needs to distribute the error enough to dissipate the noise. A
smooth solver with a loose tolerance is typically sufficient, e.g. the
settings in 'system/fvSolution' shown below:
solvers
{
MeshPhi
{
solver smoothSolver;
smoother symGaussSeidel;
tolerance 1e-2;
relTol 0;
}
...
}
PIMPLE
{
correctMeshPhi yes;
...
}
The solution of 'MeshPhi' is an inexpensive computation since it is
applied only to a small subset of the mesh adjacent to the
couple. Conservation is maintained whether or not the mesh flux
correction is enabled, and regardless of the solution tolerance for
'MeshPhi'.
Advantages of NCC:
+ NCC maintains conservation which is required for many numerical
schemes and algorithms to operate effectively, in particular those
designed to maintain boundedness of a solution.
+ Closed-volume systems no longer suffer from accumulation or loss of
mass, poor convergence of the pressure equation, and/or concentration
of error in the reference cell.
+ Partially overlapped simulations are now possible on surfaces that are
not perfectly flat. The projection fills space so no overlaps or
spaces are generated inside contiguously overlapping sections, even if
those sections have sharp angles.
+ The finite volume faces created by NCC have geometrically accurate
centres. This makes the method second order accurate in space.
+ The polyhedral mesh no longer requires duplicate boundary faces to be
generated in order to run a partially overlapped simulation.
+ Lagrangian elements can now transfer across non-conformal couplings in
parallel.
+ Once the intersection has been computed and applied to the finite
volume mesh, it can use standard cyclic or processor cyclic finite
volume boundary conditions, with no need for additional patch types or
matrix interfaces.
+ Parallel communication is done using the standard
processor-patch-field system. This is more efficient than alternative
systems since it has been carefully optimised for use within the
linear solvers.
+ Coupled patches are disconnected prior to mesh motion and topology
change and reconnected afterwards. This simplifies the boundary
condition specification for mesh motion fields.
Resolved Bug Reports:
+ https://bugs.openfoam.org/view.php?id=663
+ https://bugs.openfoam.org/view.php?id=883
+ https://bugs.openfoam.org/view.php?id=887
+ https://bugs.openfoam.org/view.php?id=1337
+ https://bugs.openfoam.org/view.php?id=1388
+ https://bugs.openfoam.org/view.php?id=1422
+ https://bugs.openfoam.org/view.php?id=1829
+ https://bugs.openfoam.org/view.php?id=1841
+ https://bugs.openfoam.org/view.php?id=2274
+ https://bugs.openfoam.org/view.php?id=2561
+ https://bugs.openfoam.org/view.php?id=3817
Deprecation:
NCC replaces the functionality provided by AMI, ACMI and Repeat AMI.
ACMI and Repeat AMI are insufficiently reliable to warrant further
maintenance so are removed in an accompanying commit to OpenFOAM-dev.
AMI is more widely used so will be retained alongside NCC for the next
version release of OpenFOAM and then subsequently removed from
OpenFOAM-dev.
This joint allows two bodies to rotate relative to each other at a
specified speed. The relative motion is completely specified, so this
joint has zero degrees of freedom.
It could be used, for example, to attach a rotating propeller to a
moving ship:
bodies
{
hull
{
...
}
propeller
{
type rigidBody;
// Dynamic properties
mass ...;
centreOfMass ...;
inertia ...;
// The propeller is connected to the hull
parent hull;
// The position relative to the hull
transform (1 0 0 0 1 0 0 0 1) (20 0 0);
// Rotation settings
joint
{
type rotating;
omega (6 0 0);
}
}
}
This new mapping structure is designed to support run-time mesh-to-mesh mapping
to allow arbitrary changes to the mesh structure, for example during extreme
motion requiring significant topology change including region disconnection etc.
The polyTopoChangeMap is the map specifically relating to polyMesh topological
changes generated by polyTopoChange and used to update and map mesh related
types and fields following the topo-change.
This is a map data structure rather than a class or function which performs the
mapping operation so polyMeshDistributionMap is more logical and comprehensible
than mapDistributePolyMesh.
Sampled sets and streamlines now write all their fields to the same
file. This prevents excessive duplication of the geometry and makes
post-processing tasks more convenient.
"axis" entries are now optional in sampled sets and streamlines. When
omitted, a default entry will be used, which is chosen appropriately for
the coordinate set and the write format. Some combinations are not
supported. For example, a scalar ("x", "y", "z" or "distance") axis
cannot be used to write in the vtk format, as vtk requires 3D locations
with which to associate data. Similarly, a point ("xyz") axis cannot be
used with the gnuplot format, as gnuplot needs a single scalar to
associate with the x-axis.
Streamlines can now write out fields of any type, not just scalars and
vectors, and there is no longer a strict requirement for velocity to be
one of the fields.
Streamlines now output to postProcessing/<functionName>/time/<file> in
the same way as other functions. The additional "sets" subdirectory has
been removed.
The raw set writer now aligns columns correctly.
The handling of segments in coordSet and sampledSet has been
fixed/completed. Segments mean that a coordinate set can represent a
number of contiguous lines, disconnected points, or some combination
thereof. This works in parallel; segments remain contiguous across
processor boundaries. Set writers now only need one write method, as the
previous "writeTracks" functionality is now handled by streamlines
providing the writer with the appropriate segment structure.
Coordinate sets and set writers now have a convenient programmatic
interface. To write a graph of A and B against some coordinate X, in
gnuplot format, we can call the following:
setWriter::New("gnuplot")->write
(
directoryName,
graphName,
coordSet(true, "X", X), // <-- "true" indicates a contiguous
"A", // line, "false" would mean
A, // disconnected points
"B",
B
);
This write function is variadic. It supports any number of
field-name-field pairs, and they can be of any primitive type.
Support for Jplot and Xmgrace formats has been removed. Raw, CSV,
Gnuplot, VTK and Ensight formats are all still available.
The old "graph" functionality has been removed from the code, with the
exception of the randomProcesses library and associated applications
(noise, DNSFoam and boxTurb). The intention is that these should also
eventually be converted to use the setWriters. For now, so that it is
clear that the "graph" functionality is not to be used elsewhere, it has
been moved into a subdirectory of the randomProcesses library.
replacing the virtual functions overridden in engineTime.
Now the userTime conversion function in Time is specified in system/controlDict
such that the solver as well as all pre- and post-processing tools also operate
correctly with the chosen user-time.
For example the user-time and rpm in the tutorials/combustion/XiEngineFoam/kivaTest case are
now specified in system/controlDict:
userTime
{
type engine;
rpm 1500;
}
The default specification is real-time:
userTime
{
type real;
}
but this entry can be omitted as the real-time class is instantiated
automatically if the userTime entry is not present in system/controlDict.
to provide a single consistent code and user interface to the specification of
physical properties in both single-phase and multi-phase solvers. This redesign
simplifies usage and reduces code duplication in run-time selectable solver
options such as 'functionObjects' and 'fvModels'.
* physicalProperties
Single abstract base-class for all fluid and solid physical property classes.
Physical properties for a single fluid or solid within a region are now read
from the 'constant/<region>/physicalProperties' dictionary.
Physical properties for a phase fluid or solid within a region are now read
from the 'constant/<region>/physicalProperties.<phase>' dictionary.
This replaces the previous inconsistent naming convention of
'transportProperties' for incompressible solvers and
'thermophysicalProperties' for compressible solvers.
Backward-compatibility is provided by the solvers reading
'thermophysicalProperties' or 'transportProperties' if the
'physicalProperties' dictionary does not exist.
* phaseProperties
All multi-phase solvers (VoF and Euler-Euler) now read the list of phases and
interfacial models and coefficients from the
'constant/<region>/phaseProperties' dictionary.
Backward-compatibility is provided by the solvers reading
'thermophysicalProperties' or 'transportProperties' if the 'phaseProperties'
dictionary does not exist. For incompressible VoF solvers the
'transportProperties' is automatically upgraded to 'phaseProperties' and the
two 'physicalProperties.<phase>' dictionary for the phase properties.
* viscosity
Abstract base-class (interface) for all fluids.
Having a single interface for the viscosity of all types of fluids facilitated
a substantial simplification of the 'momentumTransport' library, avoiding the
need for a layer of templating and providing total consistency between
incompressible/compressible and single-phase/multi-phase laminar, RAS and LES
momentum transport models. This allows the generalised Newtonian viscosity
models to be used in the same form within laminar as well as RAS and LES
momentum transport closures in any solver. Strain-rate dependent viscosity
modelling is particularly useful with low-Reynolds number turbulence closures
for non-Newtonian fluids where the effect of bulk shear near the walls on the
viscosity is a dominant effect. Within this framework it would also be
possible to implement generalised Newtonian models dependent on turbulent as
well as mean strain-rate if suitable model formulations are available.
* visosityModel
Run-time selectable Newtonian viscosity model for incompressible fluids
providing the 'viscosity' interface for 'momentumTransport' models.
Currently a 'constant' Newtonian viscosity model is provided but the structure
supports more complex functions of time, space and fields registered to the
region database.
Strain-rate dependent non-Newtonian viscosity models have been removed from
this level and handled in a more general way within the 'momentumTransport'
library, see section 'viscosity' above.
The 'constant' viscosity model is selected in the 'physicalProperties'
dictionary by
viscosityModel constant;
which is equivalent to the previous entry in the 'transportProperties'
dictionary
transportModel Newtonian;
but backward-compatibility is provided for both the keyword and model
type.
* thermophysicalModels
To avoid propagating the unnecessary constructors from 'dictionary' into the
new 'physicalProperties' abstract base-class this entire structure has been
removed from the 'thermophysicalModels' library. The only use for this
constructor was in 'thermalBaffle' which now reads the 'physicalProperties'
dictionary from the baffle region directory which is far simpler and more
consistent and significantly reduces the amount of constructor code in the
'thermophysicalModels' library.
* compressibleInterFoam
The creation of the 'viscosity' interface for the 'momentumTransport' models
allows the complex 'twoPhaseMixtureThermo' derived from 'rhoThermo' to be
replaced with the much simpler 'compressibleTwoPhaseMixture' derived from the
'viscosity' interface, avoiding the myriad of unused thermodynamic functions
required by 'rhoThermo' to be defined for the mixture.
Same for 'compressibleMultiphaseMixture' in 'compressibleMultiphaseInterFoam'.
This is a significant improvement in code and input consistency, simplifying
maintenance and further development as well as enhancing usability.
Henry G. Weller
CFD Direct Ltd.
When using 'simple' or 'hierarchical' decomposition it is useful to slightly rotate a
coordinate-aligned block-mesh to improve the processor boundaries by avoiding
irregular cell distribution at those boundaries. The degree of slight rotation
is controlled by the 'delta' coefficient and a value of 0.001 is generally
suitable so to avoid unnecessary clutter in 'decomposeParDict' 'delta' now
defaults to this value.
The new algorithm provides robust quality triangulations of non-convex
polygons. It also produces a best attempt for polygons that are badly
warped or self intersecting by minimising the area in which the local
normal is in the opposite direction to the overal polygon normal. It is
memory efficient when applied to multiple polygons as it maintains and
reuses its workspace.
This algorithm replaces implementations in the face and
faceTriangulation classes, which have been removed.
Faces can no longer be decomposed into mixtures of tris and
quadrilaterals. Polygonal faces with more than 4 sides are now
decomposed into triangles in foamToVTK and in paraFoam.
The FOAM file format has not changed from version 2.0 in many years and so there
is no longer a need for the 'version' entry in the FoamFile header to be
required and to reduce unnecessary clutter it is now optional, defaulting to the
current file format 2.0.
cpp is no longer used to pre-process Make/files files allowing standard make '#'
syntax for comments, 'ifdef', 'ifndef' conditionals etc. This is make possible
by automatically pre-pending SOURCE += to each of the source file names in
Make/files.
The list of source files compile can be specified either as a simple list of
files in Make/files e.g.
# Note: fileMonitor assumes inotify by default. Compile with -DFOAM_USE_STAT
# to use stat (=timestamps) instead of inotify
fileMonitor.C
ifdef SunOS64
dummyPrintStack.C
else
printStack.C
endif
LIB = $(FOAM_LIBBIN)/libOSspecific
or
or directly as the SOURCE entry which is used in the Makefile:
SOURCE = \
adjointOutletPressure/adjointOutletPressureFvPatchScalarField.C \
adjointOutletVelocity/adjointOutletVelocityFvPatchVectorField.C \
adjointShapeOptimizationFoam.C
EXE = $(FOAM_APPBIN)/adjointShapeOptimizationFoam
In either form make syntax for comments and conditionals is supported.
so that it can be included directly into the wmake Makefile to allow full
support of gmake syntax, variables, functions etc.
The Make/files file handled in the same manner as the Make/options file if it
contains the SOURCE entry otherwise it is first processed by cpp for backward
compatibility.
The standard set of Lagrangian clouds are now selectable at run-time.
This means that a solver that supports Lagrangian modelling can now use
any type of cloud (with some restrictions). Previously, solvers were
hard-coded to use specific cloud modelling. In addition, a cloud-list
structure has been added so that solvers may select multiple clouds,
rather than just one.
The new system is controlled as follows:
- If only a single cloud is required, then the settings for the
Lagrangian modelling should be placed in a constant/cloudProperties
file.
- If multiple clouds are required, then a constant/clouds file should be
created containing a list of cloud names defined by the user. Each
named cloud then reads settings from a corresponding
constant/<cloudName>Properties file. Clouds are evolved sequentially
in the order in which they are listed in the constant/clouds file.
- If no clouds are required, then the constant/cloudProperties file and
constant/clouds file should be omitted.
The constant/cloudProperties or constant/<cloudName>Properties files are
the same as previous cloud properties files; e.g.,
constant/kinematicCloudProperties or constant/reactingCloud1Properties,
except that they now also require an additional top-level "type" entry
to select which type of cloud is to be used. The available options for
this entry are:
type cloud; // A basic cloud of solid
// particles. Includes forces,
// patch interaction, injection,
// dispersion and stochastic
// collisions. Same as the cloud
// previously used by
// rhoParticleFoam
// (uncoupledKinematicParticleFoam)
type collidingCloud; // As "cloud" but with resolved
// collision modelling. Same as the
// cloud previously used by DPMFoam
// and particleFoam
// (icoUncoupledKinematicParticleFoam)
type MPPICCloud; // As "cloud" but with MPPIC
// collision modelling. Same as the
// cloud previously used by
// MPPICFoam.
type thermoCloud; // As "cloud" but with
// thermodynamic modelling and heat
// transfer with the carrier phase.
// Same as the limestone cloud
// previously used by
// coalChemistryFoam.
type reactingCloud; // As "thermoCloud" but with phase
// change and mass transfer
// coupling with the carrier
// phase. Same as the cloud
// previously used in fireFoam.
type reactingMultiphaseCloud; // As "reactingCloud" but with
// particles that contain multiple
// phases. Same as the clouds
// previously used in
// reactingParcelFoam and
// simpleReactingParcelFoam and the
// coal cloud used in
// coalChemistryFoam.
type sprayCloud; // As "reactingCloud" but with
// additional spray-specific
// collision and breakup modelling.
// Same as the cloud previously
// used in sprayFoam and
// engineFoam.
The first three clouds are not thermally coupled, so are available in
all Lagrangian solvers. The last four are thermally coupled and require
access to the carrier thermodynamic model, so are only available in
compressible Lagrangian solvers.
This change has reduced the number of solvers necessary to provide the
same functionality; solvers that previously differed only in their
Lagrangian modelling can now be combined. The Lagrangian solvers have
therefore been consolidated with consistent naming as follows.
denseParticleFoam: Replaces DPMFoam and MPPICFoam
reactingParticleFoam: Replaces sprayFoam and coalChemistryFoam
simpleReactingParticleFoam: Replaces simpleReactingParcelFoam
buoyantReactingParticleFoam: Replaces reactingParcelFoam
fireFoam and engineFoam remain, although fireFoam is likely to be merged
into buoyantReactingParticleFoam in the future once the additional
functionality it provides is generalised.
Some additional minor functionality has also been added to certain
solvers:
- denseParticleFoam has a "cloudForceSplit" control which can be set in
system/fvOptions.PIMPLE. This provides three methods for handling the
cloud momentum coupling, each of which have different trade-off-s
regarding numerical artefacts in the velocity field. See
denseParticleFoam.C for more information, and also bug report #3385.
- reactingParticleFoam and buoyantReactingParticleFoam now support
moving mesh in order to permit sharing parts of their implementation
with engineFoam.
Description
Non-uniform tabulated property function that linearly interpolates between
the values.
To speed-up the search of the non-uniform table a uniform jump-table is
created on construction which is used for fast indirect addressing into
the table.
Usage
\nonUniformTable
Property | Description
values | List of (temperature property) value pairs
\endnonUniformTable
Example for the density of water between 280 and 350K
\verbatim
rho
{
type nonUniformTable;
values
(
(280 999.87)
(300 995.1)
(350 973.7)
);
}
\endverbatim
to splice the SlicedGeometricField into a complete contiguous Field.
e.g. to splice the flux field phi:
scalarField completePhi
(
slicedSurfaceScalarField
(
IOobject
(
"slicedPhi",
runTime.timeName(),
mesh
),
phi,
false
).splice()
);
Integral evaluations have been implemented for all the ramp function1-s,
as well as the sine and square wave. Bounds handling has also been added
to the integration of table-type functions.
In addition, the sine wave "t0" paramater has been renamed "start" for
consistency with the ramp functions.
The general distribution has been extended to accept cumulative
distribution data, by means of a "cumulative" switch. The calculation of
the mean value has also been corrected for this distribution, and
additional header documentation and parameter checking has been added.
In addition, the distribution models now all print some basic
information (min, max and mean) into the log file to help in checking
that the specification is correct.
Patch contributed by Timo Niemi, VTT.
In order to avoid conflict with the use of ':' in model-specific fields,
e.g. "thermo:rho", in the "slash" syntax the '!' character is now used to refer
to the top-level dictionary.
If there is a part of the keyword before the '!' then this is taken to be the
file name of the dictionary from which the entry will be looked-up using the
part of the keyword after the '!'.
For example, given a dictionary file named testSlashDict2:
internalField 5.6;
active
{
type fixedValue;
value.air $internalField;
}
it is now possible to read entries from it directly in the dictionary file testSlashDict:
external
{
value $testSlashDict2!active/value.air;
}
active2
{
$testSlashDict2!active;
}
which expands to
external
{
value 5.6;
}
active2
{
type fixedValue;
value.air 5.6;
}
A new optional "slash" scoping syntax is now provided which is more intuitive
than the current "dot" syntax as it corresponds to the common directory/file
access syntax used in UNIX, and avoids limitations of the "dot" (see below)
e.g.
internalField 3.4;
active
{
type fixedValue;
value.air $internalField;
}
inactive
{
type anotherFixedValue;
value $../active/value.air;
anotherValue $:active/value.air;
sub
{
value $../../active/value.air;
anotherValue $:active/value.air;
}
}
"U.*"
{
solver GAMG;
}
e.air
{
// This does expand
$U.air;
}
"#inputSyntax slash;" selects the new "slash" syntax.
"../" refers to the parent directory.
":" refers to the top-level directory.
The corresponding dictionary using the current "dot" syntax is
internalField 3.4;
active
{
type fixedValue;
value.air $internalField;
}
inactive
{
type anotherFixedValue;
value $..active.value.air;
anotherValue $:active.value.air;
sub
{
value $...active.value.air;
anotherValue $:active.value.air;
}
}
"U.*"
{
solver GAMG;
}
e.air
{
// This doesn't expand
$U.air;
}
Note that the "$U.air" expansion does not work in this case due to the
interference between the use of '.' for scoping and phase-name.
This is a fundamental problem which prompted the development of the new more
intuitive and flexible "slash" syntax.
The new syntax also allows a for planned future development to access entries
in directories in other files, e.g.
active
{
type fixedValue;
value.air $FOAM_CASE/internalFieldValues/value.air;
}
or
active
{
type fixedValue;
value.air :../internalFieldValues/value.air;
}
Currently these deleted function declarations are still in the private section
of the class declarations but will be moved by hand to the public section over
time as this is too complex to automate reliably.
Replaced all uses of complex Xfer class with C++11 "move" constructors and
assignment operators. Removed the now redundant Xfer class.
This substantial changes improves consistency between OpenFOAM and the C++11 STL
containers and algorithms, reduces memory allocation and copy overhead when
returning containers from functions and simplifies maintenance of the core
libraries significantly.
