WIP: makeUMPIRE

|       v2312       |       v2406       |   comment     |
|-------------------|-------------------|---------------|
| ADIOS2-2.9.2      | ADIOS2-2.10.1     | updates       |
| ParaView-v5.11.2  | ParaView-v5.12.1  | updates       |

Allwmake

@@ -7,7 +7,7 @@
 #    \\/     M anipulation  |
 #------------------------------------------------------------------------------
 #     Copyright (C) 2011-2016 OpenFOAM Foundation
-#     Copyright (C) 2016-2020 OpenCFD Ltd.
+#     Copyright (C) 2016-2023 OpenCFD Ltd.
 #------------------------------------------------------------------------------
 # License
 #     This file is part of OpenFOAM, distributed under GPL-3.0-or-later.
@@ -48,7 +48,10 @@ echo Build MPI libraries if required
 echo "    $MPI_ARCH_PATH"
 case "$WM_MPLIB" in
 (OPENMPI | MPICH)
-    ./make"$WM_MPLIB" -test "$MPI_ARCH_PATH" || ./make"$WM_MPLIB"
+    if ! ./make"$WM_MPLIB" -test "$MPI_ARCH_PATH"
+    then
+        ./make"$WM_MPLIB"
+    fi
     ;;
 esac
 

BUILD.md

@@ -40,11 +40,11 @@ Usage: makeFFTW [OPTION] [fftw-VERSION]
 
 0. Review the [system requirements][link openfoam-require]
    and decide on the following:
-   * compiler type/version - if the system compiler is not relatively recent,
+   - compiler type/version - if the system compiler is not relatively recent,
      you will need a [third-party compiler](#makeGcc) installation.
-   * MPI type/version.
-   * ParaView type/version.
-   * CMake type/version, ...
+   - MPI type/version.
+   - ParaView type/version.
+   - CMake type/version, ...
 1. If you are using a system MPI (eg, openmpi), ensure that this environment
    has also been properly activated for your user.
    Often (but not always) a `mpi-selector` command is available for this purpose.
@@ -135,7 +135,7 @@ CC=clang CXX=clang++  ./makeGcc gmp-6.1.2 mpfr-4.0.0 gcc-system
 gmp_version=gmp-6.1.2
 mpfr_version=mpfr-4.0.0
 export GMP_ARCH_PATH=$WM_THIRD_PARTY_DIR/platforms/$WM_ARCH$WM_COMPILER_ARCH/$gmp_version
-export GMP_ARCH_PATH=$WM_THIRD_PARTY_DIR/platforms/$WM_ARCH$WM_COMPILER_ARCH/$mpfr_version
+export MPFR_ARCH_PATH=$WM_THIRD_PARTY_DIR/platforms/$WM_ARCH$WM_COMPILER_ARCH/$mpfr_version
 ```
 * Update update the OpenFOAM environment (eg, `wmRefresh`) again.
 
@@ -419,6 +419,7 @@ you may have additional hurdles to using the newest versions of clang.
 | [boost][page boost]   | [download][link boost]
 | [CGAL][page CGAL]     | [download][link CGAL]
 | [FFTW][page FFTW]     | [download][link FFTW]
+| [HDF5][page HDF5]     | [download][link HDF5]
 | [PETSC][page PETSC]   | [download][link PETSC]
 | [HYPRE][page HYPRE]   | [repo][repo HYPRE] or [download][link HYPRE]
 | [ADF/CGNS][page CGNS], ccm | [link ccmio][link ccmio]
@@ -431,7 +432,7 @@ you may have additional hurdles to using the newest versions of clang.
 |-----------------------|------------------------
 | [openmpi][page openmpi] | [download][link openmpi]. ***Some openmpi2/openmpi3 versions exhibit [stability issues](https://github.com/open-mpi/ompi/issues/5375)***
 | [adios][page adios]   | [repo][repo adios] or [github download][link adios]
-| [scotch, ptscotch][page scotch] | [repo][repo scotch] or [download][link scotch] or [older][older scotch] or [even older][oldest scotch]
+| [scotch, ptscotch][page scotch] | [repo][repo scotch] or [download][link scotch] or [older][older scotch]
 | [kahip][page kahip] | [download][link kahip] or [older][older kahip]
 | [metis][page metis] | [download][link metis]
 
@@ -526,21 +527,28 @@ easier to use `grep` and find the relevant pages and links.
 <!-- parallel -->
 [page adios]:     https://csmd.ornl.gov/software/adios2
 [repo adios]:     https://github.com/ornladios/ADIOS2
-[link adios]:     https://github.com/ornladios/ADIOS2/archive/v2.7.1.tar.gz
+[link adios]:     https://github.com/ornladios/ADIOS2/archive/v2.10.2.tar.gz
+
+[page hdf5]:      https://www.hdfgroup.org
+[repo hdf5]:      https://github.com/HDFGroup/hdf5
+[link hdf5]:      https://github.com/HDFGroup/hdf5/archive/refs/tags/hdf5_1.14.4.3.tar.gz
 
 [page zfp]:       http://computation.llnl.gov/projects/floating-point-compression/zfp-versions
 
 [page scotch]:    https://www.labri.fr/perso/pelegrin/scotch/
 [repo scotch]:    https://gitlab.inria.fr/scotch/scotch
-[link scotch]:    https://gforge.inria.fr/frs/download.php/file/38352/scotch_6.1.0.tar.gz
+[link scotch]:    https://gitlab.inria.fr/scotch/scotch/-/archive/v6.1.3/scotch-v6.1.3.tar.gz
 [link scotch60_10]:  https://gforge.inria.fr/frs/download.php/file/38350/scotch_6.0.10.tar.gz
 [link scotch60_9]:   https://gforge.inria.fr/frs/download.php/file/38187/scotch_6.0.9.tar.gz
-[older scotch]:   https://gforge.inria.fr/frs/download.php/file/38114/scotch_6.0.8.tar.gz
-[oldest scotch]:  https://gforge.inria.fr/frs/download.php/file/37622/scotch_6.0.6.tar.gz
+[link scotch61_0]:   https://gforge.inria.fr/frs/download.php/file/38352/scotch_6.1.0.tar.gz
+[link scotch61_3]:   https://gitlab.inria.fr/scotch/scotch/-/archive/v6.1.3/scotch-v6.1.3.tar.gz
+[older scotch]:   https://gforge.inria.fr/frs/download.php/file/38352/scotch_6.1.0.tar.gz
+[newer scotch]:   https://gitlab.inria.fr/scotch/scotch/-/archive/v7.0.1/scotch-v7.0.1.tar.gz
+[newest scotch]:  https://gitlab.inria.fr/scotch/scotch/-/archive/v7.0.6/scotch-v7.0.6.tar.gz
 
 [page kahip]:     http://algo2.iti.kit.edu/documents/kahip/
-[older kahip]:    http://algo2.iti.kit.edu/schulz/software_releases/KaHIP_2.12.tar.gz
-[link kahip]:     https://github.com/KaHIP/KaHIP/archive/v3.14.tar.gz
+[older kahip]:    https://github.com/KaHIP/KaHIP/archive/v3.15.tar.gz
+[link kahip]:     https://github.com/KaHIP/KaHIP/archive/v3.18.tar.gz
 
 [page metis]:     http://glaros.dtc.umn.edu/gkhome/metis/metis/overview
 [link metis]:     http://glaros.dtc.umn.edu/gkhome/fetch/sw/metis/metis-5.1.0.tar.gz
@@ -550,30 +558,32 @@ easier to use `grep` and find the relevant pages and links.
 [link openmpi]:   https://download.open-mpi.org/release/open-mpi/v4.1/openmpi-4.1.2.tar.bz2
 
 [page mpich]:     http://www.mpich.org/
-[link mpich]:     http://www.mpich.org/static/downloads/3.4.2/mpich-3.4.2.tar.gz
+[older mpich]:    http://www.mpich.org/static/downloads/3.4.2/mpich-3.4.2.tar.gz
+[link mpich]:     https://www.mpich.org/static/downloads/4.2.3/mpich-4.2.3.tar.gz
 
 [page mvpapich]:  http://mvapich.cse.ohio-state.edu/
-[link mvpapich]:  http://mvapich.cse.ohio-state.edu/download/mvapich/mv2/mvapich2-2.3.6.tar.gz
+[link mvpapich]:  https://mvapich.cse.ohio-state.edu/download/mvapich/mv2/mvapich2-2.3.7-1.tar.gz
 
 <!-- general -->
 [page cmake]:     http://www.cmake.org/
 [link cmake]:     https://cmake.org/files/v3.8/cmake-3.8.2.tar.gz
 
 [page boost]:     http://boost.org
-[link boost]:     https://sourceforge.net/projects/boost/files/boost/1.74.0/boost_1_74_0.tar.bz2
+[link boost]:     https://sourceforge.net/projects/boost/files/boost/1.87.0/boost_1_87_0.tar.bz2
 
 [page CGAL]:      http://cgal.org
-[link CGAL]:      https://github.com/CGAL/cgal/releases/download/releases/CGAL-4.14.3/CGAL-4.14.3.tar.xz
+[old  CGAL]:      https://github.com/CGAL/cgal/releases/download/releases/CGAL-4.14.3/CGAL-4.14.3.tar.xz
+[link CGAL]:      https://github.com/CGAL/cgal/releases/download/v6.0.1/CGAL-6.0.1-library.tar.xz
 
 [page FFTW]:      http://www.fftw.org/
 [link FFTW]:      http://www.fftw.org/fftw-3.3.10.tar.gz
 
-[page petsc]:     https://www.mcs.anl.gov/petsc/
-[link petsc]:     https://ftp.mcs.anl.gov/pub/petsc/release-snapshots/petsc-lite-3.17.2.tar.gz
+[page petsc]:     https://petsc.org/
+[link petsc]:     https://web.cels.anl.gov/projects/petsc/download/release-snapshots/petsc-lite-3.22.4.tar.gz
 
 [page hypre]:     https://computing.llnl.gov/projects/hypre-scalable-linear-solvers-multigrid-methods/
 [repo hypre]:     https://github.com/hypre-space/hypre/
-[link hypre]:     https://github.com/hypre-space/hypre/archive/v2.24.0.tar.gz
+[link hypre]:     https://github.com/hypre-space/hypre/archive/v2.31.0.tar.gz
 
 [page cgns]:      http://cgns.github.io/
 [link ccmio]:     http://portal.nersc.gov/project/visit/third_party/libccmio-2.6.1.tar.gz (check usage conditions)
@@ -586,17 +596,25 @@ easier to use `grep` and find the relevant pages and links.
 [link zlib]:      https://sourceforge.net/projects/libpng/files/zlib/1.2.11/zlib-1.2.11.tar.xz
 
 
+<!-- profiling -->
+
+[link extrae]:     https://github.com/bsc-performance-tools/extrae/archive/refs/tags/4.1.7.tar.gz
+[link libunwind]:  https://github.com/libunwind/libunwind/releases/download/v1.8.1/libunwind-1.8.1.tar.gz
+[link papi]:       http://icl.utk.edu/projects/papi/downloads/papi-7.0.1.tar.gz
+
 <!-- Visualization -->
 
 [page ParaView]:  http://www.paraview.org/
 [download ParaView]: https://www.paraview.org/download/
-[link ParaView54]: http://www.paraview.org/files/v5.4/ParaView-v5.4.1.tar.gz
-[link ParaView55]: http://www.paraview.org/files/v5.5/ParaView-v5.5.2.tar.xz
 [link ParaView56]: http://www.paraview.org/files/v5.6/ParaView-v5.6.3.tar.xz
 [link ParaView57]: http://www.paraview.org/files/v5.7/ParaView-v5.7.0.tar.xz
 [link ParaView58]: http://www.paraview.org/files/v5.8/ParaView-v5.8.1.tar.xz
 [link ParaView59]: http://www.paraview.org/files/v5.9/ParaView-v5.9.1.tar.xz
-[link ParaView]:   http://www.paraview.org/files/v5.10/ParaView-v5.10.1.tar.xz
+[link ParaView510]: http://www.paraview.org/files/v5.10/ParaView-v5.10.1.tar.xz
+[link ParaView511]: http://www.paraview.org/files/v5.11/ParaView-v5.11.2.tar.xz
+[link ParaView512]: http://www.paraview.org/files/v5.12/ParaView-v5.12.1.tar.xz
+[link ParaView513]: http://www.paraview.org/files/v5.13/ParaView-v5.13.2.tar.xz
+[link ParaView]:    http://www.paraview.org/files/v5.13/ParaView-v5.13.2.tar.xz
 
 [page mesa]:  http://mesa3d.org/
 [link mesa]:  ftp://ftp.freedesktop.org/pub/mesa/mesa-17.1.1.tar.xz
@@ -610,4 +628,4 @@ easier to use `grep` and find the relevant pages and links.
 
 ---
 
-Copyright 2016-2022 OpenCFD Ltd
+Copyright 2016-2025 OpenCFD Ltd

SOURCES.md

@@ -1,6 +1,54 @@
 Third-party software (shipped) versions according to OpenFOAM version
 
-# OpenFOAM-2112
+# OpenFOAM-2406, OpenFOAM-2412
+
+- ADIOS2-2.10.1      *update*
+- CGAL-4.14.3
+- ParaView-v5.12.1   *update*
+- boost_1_74_0
+- fftw-3.3.10
+- openmpi-4.1.2
+- scotch_6.1.0
+- kahip-3.15
+
+
+# OpenFOAM-2312
+
+- ADIOS2-2.9.2       *update*
+- CGAL-4.14.3
+- ParaView-v5.11.2   *update*
+- boost_1_74_0
+- fftw-3.3.10
+- openmpi-4.1.2
+- scotch_6.1.0
+- kahip-3.15
+
+
+# OpenFOAM-2306
+
+- ADIOS2-2.8.3
+- CGAL-4.14.3
+- ParaView-v5.11.1   *update*
+- boost_1_74_0
+- fftw-3.3.10
+- openmpi-4.1.2
+- scotch_6.1.0
+- kahip-3.15         *update*
+
+
+# OpenFOAM-2212
+
+- ADIOS2-2.8.3       *new*
+- CGAL-4.14.3
+- ParaView-v5.11.0   *new*
+- boost_1_74_0
+- fftw-3.3.10
+- openmpi-4.1.2
+- scotch_6.1.0
+- kahip-3.14
+
+
+# OpenFOAM-2206
 
 - ADIOS2-2.7.1
 - CGAL-4.14.3

etc/makeFiles/scotch/Makefile.inc.Darwin.shlib

@@ -60,7 +60,9 @@ MKDIR       = mkdir
 MV          = mv
 RANLIB      = echo
 
-LEX         = flex "-Pscotchyy$(SCOTCH_NAME_SUFFIX)" -olex.yy.c
-YACC        = bison "-pscotchyy$(SCOTCH_NAME_SUFFIX)" -y -b y
+FLEX        = flex "-Pscotchyy$(SCOTCH_NAME_SUFFIX)" -olex.yy.c
+BISON       = bison "-pscotchyy$(SCOTCH_NAME_SUFFIX)" -y -b y
+LEX         = $(FLEX)
+YACC        = $(BISON)
 
 #------------------------------------------------------------------------------

etc/makeFiles/scotch/Makefile.inc.Linux-Mingw.shlib

@@ -26,7 +26,8 @@ OBJ         = .o
 # Separate the cross-compilation flags from regular CFLAGS to ensure that
 # system gcc does not use them for the scotch build toolchain
 
-CFLAGS_CROSS = -DCOMMON_WINDOWS -DCOMMON_STUB_FORK
+# cross-compile broken for scotch-v7
+CFLAGS_CROSS = -DCOMMON_STUB_FORK -DCOMMON_WINDOWS
 
 # Flags for including windows MPI information (MSMPI)
 CFLAGS_WINMPI = -I$(MPI_ARCH_PATH)/include \
@@ -76,7 +77,9 @@ MKDIR       = mkdir
 MV          = mv
 RANLIB      = echo
 
-LEX         = flex "-Pscotchyy$(SCOTCH_NAME_SUFFIX)" -olex.yy.c
-YACC        = bison "-pscotchyy$(SCOTCH_NAME_SUFFIX)" -y -b y
+FLEX        = flex "-Pscotchyy$(SCOTCH_NAME_SUFFIX)" -olex.yy.c
+BISON       = bison "-pscotchyy$(SCOTCH_NAME_SUFFIX)" -y -b y
+LEX         = $(FLEX)
+YACC        = $(BISON)
 
 #------------------------------------------------------------------------------

etc/makeFiles/scotch/Makefile.inc.Linux.shlib

@@ -60,7 +60,9 @@ MKDIR       = mkdir
 MV          = mv
 RANLIB      = echo
 
-LEX         = flex "-Pscotchyy$(SCOTCH_NAME_SUFFIX)" -olex.yy.c
-YACC        = bison "-pscotchyy$(SCOTCH_NAME_SUFFIX)" -y -b y
+FLEX        = flex "-Pscotchyy$(SCOTCH_NAME_SUFFIX)" -olex.yy.c
+BISON       = bison "-pscotchyy$(SCOTCH_NAME_SUFFIX)" -y -b y
+LEX         = $(FLEX)
+YACC        = $(BISON)
 
 #------------------------------------------------------------------------------

etc/patches/scotch-v7.0.1

@@ -0,0 +1,48 @@
+--- scotch_6.0.6/src/libscotch/Makefile.orig	2019-04-29 14:59:53.957103493 +0200
++++ scotch_6.0.6/src/libscotch/Makefile	2019-04-29 18:50:42.560080675 +0200
+@@ -51,6 +51,12 @@
+ 
+ .PHONY				:	ptscotch	scotch	ptinstall	install	clean	realclean
+ 
++ifeq ($(WM_OSTYPE),MSwindows)
++
++libscotch			:	libscotch$(LIB) scotch.h
++
++endif
++
+ scotch				:
+ 					$(MAKE) CC="$(CCS)" CCD="$(CCS)"	\
+ 					scotch.h				\
+@@ -438,6 +444,11 @@
+ 			wgraph_part_zr$(OBJ)  			\
+ 			wgraph_store$(OBJ)
+ 
++ifeq ($(WM_OSTYPE),MSwindows)
++## Add into libscotch instead of having a separate library
++LIBSCOTCHDEPS += library_error_exit$(OBJ)
++endif
++
+ ##
+ ##  Todo list.
+ ##
+--- scotch_6.0.6/src/Makefile.orig	2018-07-14 17:24:49.000000000 +0200
++++ scotch_6.0.6/src/Makefile	2019-04-29 18:39:16.365132864 +0200
+@@ -89,9 +89,18 @@
+ $(mandir)/man1			:	$(mandir)
+ 					-$(MKDIR) $(mandir)/man1
+ 
++ifeq ($(WM_OSTYPE),MSwindows)
++
++libscotch			:	required
++					(cd libscotch ;      $(MAKE) VERSION=$(VERSION) RELEASE=$(RELEASE) PATCHLEVEL=$(PATCHLEVEL) libscotch && $(MAKE) install)
++
++else
++
+ libscotch			:	required
+ 					(cd libscotch ;      $(MAKE) VERSION=$(VERSION) RELEASE=$(RELEASE) PATCHLEVEL=$(PATCHLEVEL) scotch && $(MAKE) install)
+ 
++endif
++
+ scotch				:	libscotch
+ 					(cd scotch ;         $(MAKE) VERSION=$(VERSION) RELEASE=$(RELEASE) PATCHLEVEL=$(PATCHLEVEL) scotch && $(MAKE) install)
+ 					(cd libscotchmetis ; $(MAKE)                                                                scotch && $(MAKE) install)

etc/tools/CMakeFunctions

@@ -0,0 +1,57 @@
+#---------------------------------*- sh -*-------------------------------------
+# =========                 |
+# \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
+#  \\    /   O peration     |
+#   \\  /    A nd           | www.openfoam.com
+#    \\/     M anipulation  |
+#------------------------------------------------------------------------------
+#     Copyright (C) 2023 OpenCFD Ltd.
+#------------------------------------------------------------------------------
+# License
+#     This file is part of OpenFOAM, distributed under GPL-3.0-or-later.
+#
+# File
+#     etc/tools/CMakeFunction
+#
+# Description
+#     CMake make/install helper functions
+#
+#------------------------------------------------------------------------------
+
+# Variables referenced by the functions. Initialization at the end of the file.
+unset CMAKE_VARIABLES
+unset withVERBOSE
+BUILD_TYPE=Release  # The cmake build type
+
+#------------------------------------------------------------------------------
+
+#
+# Set CMake cache variables.
+# Automatically adds -D prefix it needed
+#
+addCMakeVariable()
+{
+    local i
+    for i
+    do
+        case "$i" in
+        ('') ;;  # empty
+        (-*) CMAKE_VARIABLES="${CMAKE_VARIABLES} ${i}" ;;
+        (*)  CMAKE_VARIABLES="${CMAKE_VARIABLES} -D${i}" ;;
+        esac
+    done
+}
+
+#
+# Verbose makefiles
+#
+addVerbosity()
+{
+    if [ "${withVERBOSE:=false}" = true ]
+    then
+        addCMakeVariable "CMAKE_VERBOSE_MAKEFILE=TRUE"
+    fi
+}
+
+
+#------------------------------------------------------------------------------

etc/tools/ParaViewFunctions

@@ -6,7 +6,7 @@
 #    \\/     M anipulation  |
 #------------------------------------------------------------------------------
 #     Copyright (C) 2011-2016 OpenFOAM Foundation
-#     Copyright (C) 2016-2021 OpenCFD Ltd.
+#     Copyright (C) 2016-2023 OpenCFD Ltd.
 #------------------------------------------------------------------------------
 # License
 #     This file is part of OpenFOAM, distributed under GPL-3.0-or-later.
@@ -16,6 +16,7 @@
 #
 # Description
 #     ParaView make/install helper functions
+#     To be loaded *after* etc/tools/CMakeFunctions
 #
 # Note
 #     Obtaining paths via 'python-config' may not always resolve properly:
@@ -132,23 +133,8 @@ setParaViewVersion()
 
 #------------------------------------------------------------------------------
 
-#
-# Set CMake cache variables.
-# Automatically adds -D prefix it needed
-#
-addCMakeVariable()
-{
-    local i
-    for i
-    do
-        case "$i" in
-        ('') ;;  # empty
-        (-*) CMAKE_VARIABLES="${CMAKE_VARIABLES} ${i}" ;;
-        (*)  CMAKE_VARIABLES="${CMAKE_VARIABLES} -D${i}" ;;
-        esac
-    done
-}
-
+# addCMakeVariable : defined in etc/tools/CMakeFunctions
+# addVerbosity : defined in etc/tools/CMakeFunctions
 
 #
 # General settings (version-dependent)
@@ -165,18 +151,6 @@ addGeneral()
 }
 
 
-#
-# Verbose makefiles
-#
-addVerbosity()
-{
-    if [ "${withVERBOSE:=false}" = true ]
-    then
-        addCMakeVariable "CMAKE_VERBOSE_MAKEFILE=TRUE"
-    fi
-}
-
-
 #
 # MPI support for PARAVIEW
 #

etc/tools/vtkFunctions

@@ -5,7 +5,7 @@
 #   \\  /    A nd           | www.openfoam.com
 #    \\/     M anipulation  |
 #------------------------------------------------------------------------------
-#     Copyright (C) 2016-2021 OpenCFD Ltd.
+#     Copyright (C) 2016-2023 OpenCFD Ltd.
 #------------------------------------------------------------------------------
 # License
 #     This file is part of OpenFOAM, distributed under GPL-3.0-or-later.
@@ -15,7 +15,7 @@
 #
 # Description
 #     VTK (library) make/install helper functions.
-#     To be loaded *after* etc/tools/ParaViewFunctions
+#     To be loaded *after* etc/tools/CMakeFunctions, ParaViewFunctions
 #
 #------------------------------------------------------------------------------
 

makeAdios2

@@ -5,7 +5,7 @@
 #   \\  /    A nd           | www.openfoam.com
 #    \\/     M anipulation  |
 #------------------------------------------------------------------------------
-#     Copyright (C) 2018-2021 OpenCFD Ltd.
+#     Copyright (C) 2018-2023 OpenCFD Ltd.
 #------------------------------------------------------------------------------
 # License
 #     This file is part of OpenFOAM, distributed under GPL-3.0-or-later.
@@ -59,6 +59,7 @@ then
     }
 fi
 . "${WM_THIRD_PARTY_DIR:?}"/etc/tools/ThirdPartyFunctions
+. "${WM_THIRD_PARTY_DIR:?}"/etc/tools/CMakeFunctions
 #------------------------------------------------------------------------------
 # Obtain version from OpenFOAM etc/config.sh file:
 _foamConfig adios2
@@ -82,6 +83,7 @@ options:
   -gcc              Force use of gcc/g++
   -cmake PATH       With cmake from the given path
   -mpi-home PATH    With hint for MPI_HOME
+  -DNAME=VALUE      add cmake variable
   -list             List available unpacked source versions
   -help             Display usage help
 
@@ -124,6 +126,9 @@ do
     adios2-[0-9]* | adios2-git* | adios-[0-9]* | adios-git*)
         PACKAGE="${1%%/}"
         ;;
+    -D[A-Z]*=* | [A-Z]*=*)  # cmake variables
+        addCMakeVariable "$1"
+        ;;
     *)
         die "unknown option/argument: '$1'"
         ;;

makeHDF5

@@ -0,0 +1,235 @@
+#!/bin/sh
+#------------------------------------------------------------------------------
+# \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
+#  \\    /   O peration     |
+#   \\  /    A nd           | www.openfoam.com
+#    \\/     M anipulation  |
+#------------------------------------------------------------------------------
+#     Copyright (C) 2024 OpenCFD Ltd.
+#------------------------------------------------------------------------------
+# License
+#     This file is part of OpenFOAM, distributed under GPL-3.0-or-later.
+#
+# Script
+#     makeHDF5
+#
+# Description
+#     Build script for HDF5
+#
+# ----------------------------------------------
+# NO USER-CONFIGURABLE SETTINGS WITHIN THIS FILE
+#------------------------------------------------------------------------------
+# Dynamic library ending (default is .so)
+[ "$(uname -s)" = Darwin ] && EXT_SO=.dylib || EXT_SO=.so
+
+# Short-circuit test for an installation
+if [ "$1" = "-test" ]
+then
+    [ "$#" -eq 2 ] || { echo "${0##*/} -test : needs 1 argument"; exit 1; }
+    dir="${2%/}" # <- *_ARCH_PATH
+    [ -d "$dir/include" ] || exit 2
+
+    package="hdf5"
+    libName="hdf5"
+    for lib in \
+        "$dir/lib/$libName$EXT_SO" \
+        "$dir/lib$WM_COMPILER_LIB_ARCH/$libName$EXT_SO" \
+        ;
+    do
+        if [ -r "$lib" ]
+        then
+            echo "    $package include: $dir/include"
+            echo "    $package library: ${lib%/*}"
+            exit 0
+        fi
+    done
+    exit 2
+fi
+#------------------------------------------------------------------------------
+if :    # Run from third-party directory
+then
+    cd "${0%/*}" || exit
+    wmakeCheckPwd "$WM_THIRD_PARTY_DIR" 2>/dev/null || {
+        echo "Error (${0##*/}) : not located in \$WM_THIRD_PARTY_DIR"
+        echo "    Check your OpenFOAM environment and installation"
+        exit 1
+    }
+fi
+. "${WM_THIRD_PARTY_DIR:?}"/etc/tools/ThirdPartyFunctions
+. "${WM_THIRD_PARTY_DIR:?}"/etc/tools/CMakeFunctions
+#------------------------------------------------------------------------------
+# Obtain version from OpenFOAM etc/config.sh file:
+_foamConfig hdf5
+
+PACKAGE="${hdf5_version:-none}"
+
+# Hint for cmake findMPI
+if [ -d "$MPI_ARCH_PATH" ]
+then
+    export MPI_HOME="$MPI_ARCH_PATH"
+fi
+
+#------------------------------------------------------------------------------
+printVersions() { listPackageVersions hdf5; exit 0; }
+printHelp() {
+    cat<<USAGE
+
+Usage: ${0##*/} [OPTION] [HDF5-VERSION]
+options:
+  -force            Force compilation, even if include/library already exists
+  -gcc              Force use of gcc/g++
+  -cmake PATH       With cmake from the given path
+  -mpi-home PATH    With hint for MPI_HOME
+  -DNAME=VALUE      add cmake variable
+  -list             List available unpacked source versions
+  -help             Display usage help
+
+* Build HDF5
+      ${PACKAGE:-[unspecified]}
+
+USAGE
+    showDownloadHint hdf5
+    exit 0  # Clean exit
+}
+#------------------------------------------------------------------------------
+exportCompiler minimal  # Minimal compiler info for CMake/configure
+
+unset optForce
+
+# Parse options
+while [ "$#" -gt 0 ]
+do
+    case "$1" in
+    '') ;;      # Ignore empty
+    -h | -help*) printHelp;;
+    -list)      printVersions;;
+    -gcc)       useGcc  ;;
+    -force)     optForce=true ;;
+
+    -cmake)
+        [ "$#" -ge 2 ] || die "'$1' option requires an argument"
+        CMAKE_PATH="${2%%/}"
+        shift
+        ;;
+    -mpi-home) # mpi with hint
+        [ "$#" -ge 2 ] || die "'$1' option requires an argument"
+        export MPI_HOME="${2%%/}"
+        case "${MPI_HOME:-none}" in (false|none) unset MPI_HOME;; esac
+        shift
+        ;;
+
+    hdf/* | hdf5/* | sources/hdf* | \
+    hdf5[-_][0-9]* | hdf5-git* )
+        PACKAGE="${1%%/}"
+        ;;
+    -D[A-Z]*=* | [A-Z]*=*)  # cmake variables
+        addCMakeVariable "$1"
+        ;;
+    *)
+        die "unknown option/argument: '$1'"
+        ;;
+    esac
+    shift
+done
+
+if [ -z "$PACKAGE" ]
+then
+    die "The HDF5 package/version not specified"
+elif _foamIsNone "$PACKAGE" || _foamIsSystem "$PACKAGE"
+then
+    echo "Using none/system (skip ThirdParty build of HDF5)"
+    exit 0
+fi
+
+# Known build issues for mingw (various things)
+case "$WM_COMPILER" in
+(Mingw*)
+    if [ "$optForce" = true ]
+    then
+        echo "Warning: hdf5 - likely compilation issues with $WM_COMPILER"
+    else
+        echo "Skipping hdf5 - likely compilation issues with $WM_COMPILER"
+        exit 0
+    fi
+    ;;
+esac
+
+#------------------------------------------------------------------------------
+#
+# Build HDF5
+#   *PACKAGE : name-version of the package
+#   *SOURCE  : location of original sources
+#   *PREFIX  : installation directory
+
+PKG_SOURCE="$(findSourceDir "$PACKAGE")"
+PACKAGE="$(basename "$PACKAGE")"
+PKG_PREFIX="$installBASE/$PACKAGE"
+export GIT_DIR="$PKG_SOURCE/.git"
+
+: "${FOAM_MPI:=dummy}"
+
+# FUTURE:
+#
+# Manual installation of parallel libraries
+# from libdir to -> $FOAM_EXT_LIBBIN/$FOAM_MPI
+#
+
+echo
+echo ========================================
+echo "Build hdf5 library $PACKAGE for $FOAM_MPI"
+echo
+
+# Needs future adjustment
+# - for mpi-specific library locations
+if [ -z "$optForce" ] \
+&& [ -f "$PKG_PREFIX/include/hdf5.h" ] \
+&& {
+    [ -r "$PKG_PREFIX/lib/libhdf5$EXT_SO" ] \
+ || [ -r "$PKG_PREFIX/lib$WM_COMPILER_LIB_ARCH/libhdf5$EXT_SO" ]
+}
+then
+    echo "    HDF5 already built : $PKG_PREFIX"
+else
+    # CMake options often lag the configure ones
+    echo "Starting build: $PACKAGE (using cmake)"
+    echo
+    (
+        PKG_BUILD="$buildBASE/$PACKAGE"
+        cd "$PKG_SOURCE" || exit
+
+        applyPatch "$PACKAGE" "$PKG_SOURCE"
+
+        # Remove any existing build folder and recreate
+        rm -rf "$PKG_PREFIX"
+        rm -rf "$PKG_BUILD"
+        mkdir -p "$PKG_BUILD"
+
+        # May not work properly with FOAM_MPI = dummy
+        if [ "$FOAM_MPI" != dummy ]
+        then
+            CC=mpicc
+            CXX=mpicxx
+        fi
+
+        cmake=$(findCMake)
+
+        # Installs into lib64/
+        cd "$PKG_BUILD" && set -x && \
+        ${cmake:?} \
+            -DCMAKE_INSTALL_PREFIX="$PKG_PREFIX" \
+            -DCMAKE_BUILD_TYPE=Release \
+            -DHDF5_BUILD_FORTRAN=FALSE \
+            -DHDF5_BUILD_TESTING=FALSE \
+            -DHDF5_BUILD_STATIC_LIBS=FALSE \
+            ${WM_QUIET:+-DCMAKE_RULE_MESSAGES=OFF} \
+            "$PKG_SOURCE" \
+        && make -j $WM_NCOMPPROCS all \
+        && make install \
+        && echo "Built: $PACKAGE"
+    ) || {
+        echo "Error building: $PACKAGE"
+        exit 1
+    }
+fi
+
+# -----------------------------------------------------------------------------

makeParaView

@@ -36,6 +36,7 @@ then
     }
 fi
 . "${WM_THIRD_PARTY_DIR:?}"/etc/tools/ThirdPartyFunctions
+. "${WM_THIRD_PARTY_DIR:?}"/etc/tools/CMakeFunctions
 . "${WM_THIRD_PARTY_DIR:?}"/etc/tools/ParaViewFunctions
 #------------------------------------------------------------------------------
 

makeUMPIRE

@@ -0,0 +1,233 @@
+#!/bin/sh
+#------------------------------------------------------------------------------
+# \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
+#  \\    /   O peration     |
+#   \\  /    A nd           | www.openfoam.com
+#    \\/     M anipulation  |
+#------------------------------------------------------------------------------
+#     Copyright (C) 2025 OpenCFD Ltd.
+#------------------------------------------------------------------------------
+# License
+#     This file is part of OpenFOAM, distributed under GPL-3.0-or-later.
+#
+# Script
+#     makeUMPIRE
+#
+# Description
+#     Build script for UMPIRE
+#
+# ----------------------------------------------
+# NO USER-CONFIGURABLE SETTINGS WITHIN THIS FILE
+#------------------------------------------------------------------------------
+# Dynamic library ending (default is .so)
+[ "$(uname -s)" = Darwin ] && EXT_SO=.dylib || EXT_SO=.so
+
+# Short-circuit test for an installation
+if [ "$1" = "-test" ]
+then
+    [ "$#" -eq 2 ] || { echo "${0##*/} -test : needs 1 argument"; exit 1; }
+    dir="${2%/}" # <- *_ARCH_PATH
+    [ -d "$dir/include/umpire" ] || exit 2
+
+    package="umpire"
+    libStatic="libumpire.a"
+    for lib in \
+        "$dir/lib/$libStatic" \
+        "$dir/lib$WM_COMPILER_LIB_ARCH/$libStatic" \
+        ;
+    do
+        if [ -r "$lib" ]
+        then
+            echo "    $package include: $dir/include"
+            echo "    $package library: ${lib%/*}"
+            exit 0
+        fi
+    done
+    exit 2
+fi
+#------------------------------------------------------------------------------
+if :    # Run from third-party directory
+then
+    cd "${0%/*}" || exit
+    wmakeCheckPwd "$WM_THIRD_PARTY_DIR" 2>/dev/null || {
+        echo "Error (${0##*/}) : not located in \$WM_THIRD_PARTY_DIR"
+        echo "    Check your OpenFOAM environment and installation"
+        exit 1
+    }
+fi
+. "${WM_THIRD_PARTY_DIR:?}"/etc/tools/ThirdPartyFunctions
+. "${WM_THIRD_PARTY_DIR:?}"/etc/tools/CMakeFunctions
+#------------------------------------------------------------------------------
+# Obtain version from OpenFOAM etc/config.sh file:
+_foamConfig umpire
+
+PACKAGE="${umpire_version:-none}"
+
+# Hint for cmake findMPI
+if [ -d "$MPI_ARCH_PATH" ]
+then
+    export MPI_HOME="$MPI_ARCH_PATH"
+fi
+
+#------------------------------------------------------------------------------
+printVersions() { listPackageVersions umpire; exit 0; }
+printHelp() {
+    cat<<USAGE
+
+Usage: ${0##*/} [OPTION] [umpire-VERSION]
+options:
+  -force            Force compilation, even if include/library already exists
+  -gcc              Force use of gcc/g++
+  -cmake PATH       With cmake from the given path
+  -mpi-home PATH    With hint for MPI_HOME
+  -DNAME=VALUE      add cmake variable
+  -list             List available unpacked source versions
+  -help             Display usage help
+
+* Build UMPIRE
+      ${PACKAGE:-[unspecified]}
+
+USAGE
+    showDownloadHint umpire
+    exit 0  # Clean exit
+}
+#------------------------------------------------------------------------------
+exportCompiler minimal  # Minimal compiler info for CMake/configure
+
+unset optForce
+
+# Parse options
+while [ "$#" -gt 0 ]
+do
+    case "$1" in
+    '') ;;      # Ignore empty
+    -h | -help*) printHelp;;
+    -list)      printVersions;;
+    -gcc)       useGcc  ;;
+    -force)     optForce=true ;;
+
+    -cmake)
+        [ "$#" -ge 2 ] || die "'$1' option requires an argument"
+        CMAKE_PATH="${2%%/}"
+        shift
+        ;;
+    -mpi-home) # mpi with hint
+        [ "$#" -ge 2 ] || die "'$1' option requires an argument"
+        export MPI_HOME="${2%%/}"
+        case "${MPI_HOME:-none}" in (false|none) unset MPI_HOME;; esac
+        shift
+        ;;
+
+    umpire/* | sources/umpire* | umpire-[0-9]* | umpire-git*)
+        PACKAGE="${1%%/}"
+        ;;
+    -D[A-Z]*=* | [A-Z]*=*)  # cmake variables
+        addCMakeVariable "$1"
+        ;;
+    *)
+        die "unknown option/argument: '$1'"
+        ;;
+    esac
+    shift
+done
+
+if [ -z "$PACKAGE" ]
+then
+    die "The UMPIRE package/version not specified"
+elif _foamIsNone "$PACKAGE" || _foamIsSystem "$PACKAGE"
+then
+    echo "Using none/system (skip ThirdParty build of UMPIRE)"
+    exit 0
+fi
+
+# Known build issues for mingw (various things)
+case "$WM_COMPILER" in
+(Mingw*)
+    if [ "$optForce" = true ]
+    then
+        echo "Warning: umpire - not tested with $WM_COMPILER"
+    else
+        echo "Skipping umpire - not tested with $WM_COMPILER"
+        exit 0
+    fi
+    ;;
+esac
+
+#------------------------------------------------------------------------------
+#
+# Build UMPIRE
+#   *PACKAGE : name-version of the package
+#   *SOURCE  : location of original sources
+#   *PREFIX  : installation directory
+
+PKG_SOURCE="$(findSourceDir "$PACKAGE")"
+PACKAGE="$(basename "$PACKAGE")"
+PKG_PREFIX="$installBASE/$PACKAGE"
+export GIT_DIR="$PKG_SOURCE/.git"
+
+echo
+echo ========================================
+echo "Build umpire library $PACKAGE"
+echo
+
+if [ -z "$optForce" ] \
+&& [ -f "$PKG_PREFIX/include/umpire/Umpire.hpp" ] \
+&& {
+    [ -r "$PKG_PREFIX/lib/libumpire.a" ] \
+ || [ -r "$PKG_PREFIX/lib$WM_COMPILER_LIB_ARCH/libumpire.a" ]
+}
+then
+    echo "    UMPIRE already built : $PKG_PREFIX"
+else
+    # CMake options often lag the configure ones
+    echo "Starting build: $PACKAGE (using cmake)"
+    echo
+    (
+        PKG_BUILD="$buildBASE/$PACKAGE"
+        cd "$PKG_SOURCE" || exit
+
+        applyPatch "$PACKAGE" "$PKG_SOURCE"
+
+        # Remove any existing build folder and recreate
+        rm -rf "$PKG_PREFIX"
+        rm -rf "$PKG_BUILD"
+        mkdir -p "$PKG_BUILD"
+
+        # With MPI?
+        # -DENABLE_FIND_MPI=ON
+
+        cmake=$(findCMake)
+
+        # By default installs into lib64/,
+        # but libcamp installs into lib/ so use that here as well !
+        #
+        # Also note that the umpire currently (2025-04-03) doesn't properly
+        # handle a relative directory for CMAKE_INSTALL_LIBDIR
+        # (https://github.com/LLNL/Umpire/issues/952)
+
+        libdir="$PKG_PREFIX/lib"
+
+        cd "$PKG_BUILD" && set -x && \
+        ${cmake:?} \
+            -DCMAKE_INSTALL_PREFIX="$PKG_PREFIX" \
+            -DCMAKE_INSTALL_LIBDIR="$libdir" \
+            -DCMAKE_BUILD_TYPE=Release \
+            -DCAMP_ENABLE_TESTS=OFF \
+            -DENABLE_ASTYLE=OFF \
+            -DENABLE_DOCS=OFF \
+            -DENABLE_DOXYGEN=OFF \
+            -DENABLE_EXAMPLES=OFF \
+            -DENABLE_FORTRAN=OFF \
+            -DENABLE_TESTS=OFF \
+            ${WM_QUIET:+-DCMAKE_RULE_MESSAGES=OFF} \
+            "$PKG_SOURCE" \
+        && make -j $WM_NCOMPPROCS all \
+        && make install \
+        && echo "Built: $PACKAGE"
+    ) || {
+        echo "Error building: $PACKAGE"
+        exit 1
+    }
+fi
+
+# -----------------------------------------------------------------------------

makeVTK

@@ -6,7 +6,7 @@
 #   \\  /    A nd           | www.openfoam.com
 #    \\/     M anipulation  |
 #------------------------------------------------------------------------------
-#     Copyright (C) 2016-2021 OpenCFD Ltd.
+#     Copyright (C) 2016-2023 OpenCFD Ltd.
 #------------------------------------------------------------------------------
 # License
 #     This file is part of OpenFOAM, distributed under GPL-3.0-or-later.
@@ -37,6 +37,7 @@ then
     }
 fi
 . "${WM_THIRD_PARTY_DIR:?}"/etc/tools/ThirdPartyFunctions
+. "${WM_THIRD_PARTY_DIR:?}"/etc/tools/CMakeFunctions
 . "${WM_THIRD_PARTY_DIR:?}"/etc/tools/ParaViewFunctions
 . "${WM_THIRD_PARTY_DIR:?}"/etc/tools/vtkFunctions
 #------------------------------------------------------------------------------