New reactingFoam tutorial counterFlowFlame2DLTS_GRI_TDAC demonstrates this new
functionality.
Additionally the ISAT table growth algorithm has been further optimized
providing an overall speedup of between 15% and 38% for the tests run so far.
Updates to TDAC and ISAT provided by Francesco Contino.
Implementation updated and integrated into OpenFOAM-dev by
Henry G. Weller, CFD Direct Ltd with the help of Francesco Contino.
Original code providing all algorithms for chemistry reduction and
tabulation contributed by Francesco Contino, Tommaso Lucchini, Gianluca
D’Errico, Hervé Jeanmart, Nicolas Bourgeois and Stéphane Backaert.
e.g. in tutorials/heatTransfer/buoyantSimpleFoam/externalCoupledCavity/0/T
hot
{
type externalCoupledTemperature;
commsDir "${FOAM_CASE}/comms";
file "data";
initByExternal yes;
log true;
value uniform 307.75; // 34.6 degC
}
Previously both 'file' and 'fileName' were used inconsistently in different
classes and given that there is no confusion or ambiguity introduced by using
the simpler 'file' rather than 'fileName' this change simplifies the use and
maintenance of OpenFOAM.
e.g.
motorBike
{
type triSurfaceMesh;
file "motorBike.obj";
}
Based on patch provided by Mattijs Janssens
Resolves part of bug-report https://bugs.openfoam.org/view.php?id=2396
e.g. in the reactingFoam/laminar/counterFlowFlame2DLTS tutorial:
PIMPLE
{
momentumPredictor no;
nOuterCorrectors 1;
nCorrectors 1;
nNonOrthogonalCorrectors 0;
maxDeltaT 1e-2;
maxCo 1;
alphaTemp 0.05;
alphaY 0.05;
Yref
{
O2 0.1;
".*" 1;
}
rDeltaTSmoothingCoeff 1;
rDeltaTDampingCoeff 1;
}
will limit the LTS time-step according to the rate of consumption of 'O2'
normalized by the reference mass-fraction of 0.1 and all other species
normalized by the reference mass-fraction of 1. Additionally the time-step
factor of 'alphaY' is applied to all species. Only the species specified in the
'Yref' sub-dictionary are included in the LTS limiter and if 'alphaY' is omitted
or set to 1 the reaction rates are not included in the LTS limiter.
Combined 'dQ()' and 'Sh()' into 'Qdot()' which returns the heat-release rate in
the normal units [kg/m/s3] and used as the heat release rate source term in
the energy equations, to set the field 'Qdot' in several combustion solvers
and for the evaluation of the local time-step when running LTS.
defined by functionObjects, e.g. wallHeatFlux, wallShearStress and yPlus.
Patch contributed by Bruno Santos
Resolves bug-report http://bugs.openfoam.org/view.php?id=2353
which provided warning about backward-compatibility issue with setting div
schemes for steady-state. It caused confusion by generating incorrect warning
messages for compressible cases for which the 'bounded' should NOT be applied to
the 'div(phid,p)'.
