- Uses the user-specified value for outputTemperature:
{
type externalCoupledTemperature;
outputTemperture fluid; // or wall;
}
Otherwises uses 'wall' as a default (for compatibility) and emits a
warning.
The T.out header now reflects the type of output. Eg,
# Values: area Tfluid qDot htc
- tutorials based on squareBend used Default_Boundary_Region explicitly
defined since they predated the defaultPatch renaming (2008).
The name 'Default_Boundary_Region' was for convenience as the default
name when converting to PROSTAR or CCM formation, but can now be
changed to something more generic.
- define wall boundary conditions for squareBend using a general regex
to allow future splitting of wall types by name.
Previously the coordinate system functionality was split between
coordinateSystem and coordinateRotation. The coordinateRotation stored
the rotation tensor and handled all tensor transformations.
The functionality has now been revised and consolidated into the
coordinateSystem classes. The sole purpose of coordinateRotation
is now just to provide a selectable mechanism of how to define the
rotation tensor (eg, axis-angle, euler angles, local axes) for user
input, but after providing the appropriate rotation tensor it has
no further influence on the transformations.
--
The coordinateSystem class now contains an origin and a base rotation
tensor directly and various transformation methods.
- The origin represents the "shift" for a local coordinate system.
- The base rotation tensor represents the "tilt" or orientation
of the local coordinate system in general (eg, for mapping
positions), but may require position-dependent tensors when
transforming vectors and tensors.
For some coordinate systems (currently the cylindrical coordinate system),
the rotation tensor required for rotating a vector or tensor is
position-dependent.
The new coordinateSystem and its derivates (cartesian, cylindrical,
indirect) now provide a uniform() method to define if the rotation
tensor is position dependent/independent.
The coordinateSystem transform and invTransform methods are now
available in two-parameter forms for obtaining position-dependent
rotation tensors. Eg,
... = cs.transform(globalPt, someVector);
In some cases it can be useful to use query uniform() to avoid
storage of redundant values.
if (cs.uniform())
{
vector xx = cs.transform(someVector);
}
else
{
List<vector> xx = cs.transform(manyPoints, someVector);
}
Support transform/invTransform for common data types:
(scalar, vector, sphericalTensor, symmTensor, tensor).
====================
Breaking Changes
====================
- These changes to coordinate systems and rotations may represent
a breaking change for existing user coding.
- Relocating the rotation tensor into coordinateSystem itself means
that the coordinate system 'R()' method now returns the rotation
directly instead of the coordinateRotation. The method name 'R()'
was chosen for consistency with other low-level entities (eg,
quaternion).
The following changes will be needed in coding:
Old: tensor rot = cs.R().R();
New: tensor rot = cs.R();
Old: cs.R().transform(...);
New: cs.transform(...);
Accessing the runTime selectable coordinateRotation
has moved to the rotation() method:
Old: Info<< "Rotation input: " << cs.R() << nl;
New: Info<< "Rotation input: " << cs.rotation() << nl;
- Naming consistency changes may also cause code to break.
Old: transformVector()
New: transformPrincipal()
The old method name transformTensor() now simply becomes transform().
====================
New methods
====================
For operations requiring caching of the coordinate rotations, the
'R()' method can be used with multiple input points:
tensorField rots(cs.R(somePoints));
and later
Foam::transformList(rots, someVectors);
The rotation() method can also be used to change the rotation tensor
via a new coordinateRotation definition (issue #879).
The new methods transformPoint/invTransformPoint provide
transformations with an origin offset using Cartesian for both local
and global points. These can be used to determine the local position
based on the origin/rotation without interpreting it as a r-theta-z
value, for example.
================
Input format
================
- Streamline dictionary input requirements
* The default type is cartesian.
* The default rotation type is the commonly used axes rotation
specification (with e1/e2/3), which is assumed if the 'rotation'
sub-dictionary does not exist.
Example,
Compact specification:
coordinateSystem
{
origin (0 0 0);
e2 (0 1 0);
e3 (0.5 0 0.866025);
}
Full specification (also accepts the longer 'coordinateRotation'
sub-dictionary name):
coordinateSystem
{
type cartesian;
origin (0 0 0);
rotation
{
type axes;
e2 (0 1 0);
e3 (0.5 0 0.866025);
}
}
This simplifies the input for many cases.
- Additional rotation specification 'none' (an identity rotation):
coordinateSystem
{
origin (0 0 0);
rotation { type none; }
}
- Additional rotation specification 'axisAngle', which is similar
to the -rotate-angle option for transforming points (issue #660).
For some cases this can be more intuitive.
For example,
rotation
{
type axisAngle;
axis (0 1 0);
angle 30;
}
vs.
rotation
{
type axes;
e2 (0 1 0);
e3 (0.5 0 0.866025);
}
- shorter names (or older longer names) for the coordinate rotation
specification.
euler EulerRotation
starcd STARCDRotation
axes axesRotation
================
Coding Style
================
- use Foam::coordSystem namespace for categories of coordinate systems
(cartesian, cylindrical, indirect). This reduces potential name
clashes and makes a clearer declaration. Eg,
coordSystem::cartesian csys_;
The older names (eg, cartesianCS, etc) remain available via typedefs.
- added coordinateRotations namespace for better organization and
reduce potential name clashes.
- improve doxygen entries for searchable surfaces.
- support selection of searchable surfaces with shorter names.
Eg,
type box | cylinder | ...;
vs type searchableBox | searchableCylinder | ...;
The tutorial demonstrates generation of a C-grid mesh using blockMesh
The geometry is provided by a surface mesh (OBJ file) of the NACA0012 aerofoil
The case is setup with a freestream flow speed of Ma=0.72
Thanks to Kai Bastos at Duke University for the geometry and helpful input.
and replaced rhoPimpleDyMFoam with a script which reports this change.
The rhoPimpleDyMFoam tutorials have been moved into the rhoPimpleFoam directory.
This change is the first of a set of developments to merge dynamic mesh
functionality into the standard solvers to improve consistency, usability,
flexibility and maintainability of these solvers.
Henry G. Weller
CFD Direct Ltd.
rhoReactingFoam: Updated for changes to rhoPimpleFoam files
Now pimpleDyMFoam is exactly equivalent to pimpleFoam when running on a
staticFvMesh. Also when the constant/dynamicMeshDict is not present a
staticFvMesh is automatically constructed so that the pimpleDyMFoam solver can
run any pimpleFoam case without change.
pimpleDyMFoam: Store Uf as an autoPtr for better error handling
pimpleFoam: Set initial deltaT from the Courant number
for improved stability on start-up and compatibility with pimpleDyMFoam
ENH: pimpleFoam: Merged dynamic mesh functionality of pimpleDyMFoam into pimpleFoam
and replaced pimpleDyMFoam with a script which reports this change.
The pimpleDyMFoam tutorials have been moved into the pimpleFoam directory.
This change is the first of a set of developments to merge dynamic mesh
functionality into the standard solvers to improve consistency, usability,
flexibility and maintainability of these solvers.
Henry G. Weller
CFD Direct Ltd.
tutorials/incompressible/pimpleFoam: Updated pimpleDyMFoam tutorials to run pimpleFoam
Renamed tutorials/incompressible/pimpleFoam/RAS/wingMotion/wingMotion2D_pimpleDyMFoam
-> tutorials/incompressible/pimpleFoam/RAS/wingMotion/wingMotion2D_pimpleFoam
Within decomposeParDict, it is now possible to specify a different
decomposition method, methods coefficients or number of subdomains
for each region individually.
The top-level numberOfSubdomains remains mandatory, since this
specifies the number of domains for the entire simulation.
The individual regions may use the same number or fewer domains.
Any optional method coefficients can be specified in a general
"coeffs" entry or a method-specific one, eg "metisCoeffs".
For multiLevel, only the method-specific "multiLevelCoeffs" dictionary
is used, and is also mandatory.
----
ENH: shortcut specification for multiLevel.
In addition to the longer dictionary form, it is also possible to
use a shorter notation for multiLevel decomposition when the same
decomposition method applies to each level.
- Arrhenius viscocity model for incompressible viscocity.
- energyTransport FO for incompressible single and multiple phase
flows and viscousDissipation fvOption source.
- Tutorial to show the use of energyTransport:
multiphase/multiphaseInterFoam/laminar/mixerVessel2D
- Tutorial to show viscousDissipation:
compressible/rhoPimpleFoam/RAS/TJunction
- although this has been supported for many years, the tutorials
continued to use "convertToMeters" entry, which is specific to blockMesh.
The "scale" is more consistent with other dictionaries.
ENH:
- ignore "scale 0;" (treat as no scaling) for blockMeshDict,
consistent with use elsewhere.
- Use on/off vs longer compressed/uncompressed.
For consistency, replaced yes/no with on/off.
- Avoid the combination of binary/compressed,
which is disallowed and provokes a warning anyhow
For example the actuationDiskSource fvOption may now be specified
disk1
{
type actuationDiskSource;
fields (U);
selectionMode cellSet;
cellSet actuationDisk1;
diskDir (1 0 0); // Orientation of the disk
Cp 0.386;
Ct 0.58;
diskArea 40;
upstreamPoint (581849 4785810 1065);
}
rather than
disk1
{
type actuationDiskSource;
active on;
actuationDiskSourceCoeffs
{
fields (U);
selectionMode cellSet;
cellSet actuationDisk1;
diskDir (1 0 0); // Orientation of the disk
Cp 0.386;
Ct 0.58;
diskArea 40;
upstreamPoint (581849 4785810 1065);
}
}
but this form is supported for backward compatibility.
The pitzDaily case uses a lot of mesh grading close to walls and the shear layer.
Prior to v2.4, blockMesh only permitted grading in one direction within a single block,
so the pitzDaily mesh comprised of 13 blocks to accommodate the complex grading pattern.
blockMesh has multi-grading that allows users to divide a block in a given direction and
apply different grading within each division. The mesh generated with blockMesh using
13 blocks has been replaced with a mesh of 5 blocks that use multi-grading. The new
blockMeshDict configuration produces a mesh very similar to the original 13-block mesh.
Both stardard SIMPLE and the SIMPLEC (using the 'consistent' option in
fvSolution) are now supported for both subsonic and transonic flow of all
fluid types.
rhoPimpleFoam now instantiates the lower-level fluidThermo which instantiates
either a psiThermo or rhoThermo according to the 'type' specification in
thermophysicalProperties, see also commit a1c8cde310
