- field blocking/exclusion added in commit d9ab5d54ef,
but was incorrectly doing a lookup for "blockField" for ensight
although "excludeFields" was documented (and expected).
Now corrected to use "excludeFields"
- functionality similar to that provided by foamToEnsight, foamToVTK
which allows blocking out patches (eg, outer walls, inlet/outlet)
that are not particularly interesting to visualize
- since ensight format is always float and also always written
component-wise, perform the double -> float narrowing when
extracting the components. This reduces the amount of data
transferred between processors.
ENH: avoid vtk/ensight parallel communication of empty messages
- since ensight writes by element type (eg, tet, hex, polyhedral) the
individual written field sections will tend to be relatively sparse.
Skip zero-size messages, which should help reduce some of the
synchronization bottlenecks.
ENH: use 'data chunking' when writing ensight files in parallel
- since ensight fields are written on a per-element basis, the
corresponding segment can become rather sparsely distributed. With
'data chunking', we attempt to get as many send/recv messages in
before flushing the buffer for writing. This should make the
sequential send/recv less affected by the IO time.
ENH: allow use of an external buffer when writing ensight components
STYLE: remove last vestiges of autoPtr<ensightFile> for output routines
- ensightWrite, vtkWrite, fv::cellSetOption
ENH: additional topoSet "ignore" action
- this no-op can be used to skip an action step, instead of removing
the entire entry
- direct construct and reset method for creating a zero-sized (dummy)
subMesh. Has no exposed faces and no parallel synchronization
required.
- core mapping (interpolate) functionality with direct handling
of subsetting in fvMeshSubset (src/finiteVolume).
Does not use dynamicMesh topology changes
- two-step subsetting as fvMeshSubsetter (src/dynamicMesh).
Does use dynamicMesh topology changes.
This is apparently only needed by the subsetMesh application itself.
DEFEATURE: remove deprecated setLargeCellSubset() method
- was deprecated JUL-2018, now removed (see issue #951)
- also disables PointData if manifold cells are detected.
This is a partial workaround for volPointInterpolation problems
with handling manifold cells.
- wrap command-line retrieval of fileName with an implicit validate.
Instead of this:
fileName input(args[1]);
fileName other(args["someopt"]);
Now use this:
auto input = args.get<fileName>(1);
auto other = args.get<fileName>("someopt");
which adds a fileName::validate on the inputs
Because of how it is implemented, it will automatically also apply
to argList getOrDefault<fileName>, readIfPresent<fileName> etc.
- adjust fileName::validate and clean to handle backslash conversion.
This makes it easier to ensure that path names arising from MS-Windows
are consistently handled internally.
- dictionarySearch: now check for initial '/' directly instead of
relying on fileName isAbsolute(), which now does more things
BREAKING: remove fileName::clean() const method
- relying on const/non-const to control the behaviour (inplace change
or return a copy) is too fragile and the const version was
almost never used.
Replace:
fileName sanitized = constPath.clean();
With:
fileName sanitized(constPath);
sanitized.clean());
STYLE: test empty() instead of comparing with fileName::null
- previously introduced `getOrDefault` as a dictionary _get_ method,
now complete the transition and use it everywhere instead of
`lookupOrDefault`. This avoids mixed usage of the two methods that
are identical in behaviour, makes for shorter names, and promotes
the distinction between "lookup" access (ie, return a token stream,
locate and return an entry) and "get" access (ie, the above with
conversion to concrete types such as scalar, label etc).
* Support default values for format/compress enum lookups.
- Avoids situations where the preferred default format is not ASCII.
For example, with dictionary input:
format binar;
The typing mistake would previously have caused formatEnum to
default to ASCII. We can now properly control its behaviour.
IOstream::formatEnum
(
dict.get<word>("format"), IOstream::BINARY
);
Allowing us to switch ascii/binary, using BINARY by default even in
the case of spelling mistakes. The mistakes are flagged, but the
return value can be non-ASCII.
* The format/compression lookup behave as pass-through if the lookup
string is empty.
- Allows the following to work without complaint
IOstream::formatEnum
(
dict.getOrDefault("format", word::null), IOstream::BINARY
);
- Or use constructor-like failsafe method
IOstream::formatEnum("format", dict, IOstream::BINARY);
- Apply the same behaviour with setting stream format/compression
from a word.
is.format("binar");
will emit a warning, but leave the stream format UNCHANGED
* Rationalize versionNumber construction
- constexpr constructors where possible.
Default construct is the "currentVersion"
- Construct from token to shift the burden to versionNumber.
Support token as argument to version().
Now:
is.version(headerDict.get<token>("version"));
or failsafe constructor method
is.version
(
IOstreamOption::versionNumber("version", headerDict)
);
Before (controlled input):
is.version
(
IOstreamOption::versionNumber
(
headerDict.get<float>("version")
)
);
Old, uncontrolled input - has been removed:
is.version(headerDict.lookup("version"));
* improve consistency, default behaviour for IOstreamOption construct
- constexpr constructors where possible
- add copy construct with change of format.
- construct IOstreamOption from streamFormat is now non-explicit.
This is a commonly expected result with no ill-effects
- includes restructuring and simplification of low-level ensight part
handling and refactor of backends to improve code reuse.
foamToEnsight
-------------
* new cellZone support.
This was previously only possible via a separate foamToEnsightParts
utility that was not parallelized.
* support for point fields.
* `-nearCellValue` option (as per foamToVTK)
* data indexing now uses values from the time index.
This is consistent with the ensightWrite function object and
can help with restarts.
* existing ensight directories are removed, unless the -no-overwrite
option is supplied
foamToEnsightParts
------------------
* now redundant and removed.
ensightOutputSurface (new class)
--------------------------------
* a lightweight wrapper for point/face references that is tailored
for the ensightSurfaceWriter. It uses compact face/point information
and is serial only, since this is the format requirements from the
surfaceWriter class.
ensightMesh (revised class)
---------------------------
* now only holds a polyMesh reference, which removes its dependency
on finiteVolume and allows it to be relocated under fileFormats
instead of conversion.
Removed classes: ensightParts, ensighPartFaces, ensightPartCells
- these were used by foamToEnsightParts, but not needed anymore.
- silently deprecate 'startsWith', 'endsWith' methods
(added in 2016: 2b14360662), in favour of
'starts_with', 'ends_with' methods, corresponding to C++20 and
allowing us to cull then in a few years.
- handle single character versions of starts_with, ends_with.
- add single character version of removeEnd and silently deprecate
removeTrailing which did the same thing.
- drop the const versions of removeRepeated, removeTrailing.
Unused and with potential confusion.
STYLE: use shrink_to_fit(), erase()
- changed ensightOutput from a class solely comprising static methods to
a namespace and added in sub-namespaces Detail and Serial.
This makes it easier to "mix-in" functions at different levels.
Refactored and combined some serial/parallel code where possible.
The general ensightOutput namespace has now shifted to be in the
fileFormats lib, while leaving volField outputs in the conversion lib
and cloud outputs in the lagrangian-intermediate lib.
The ensightCloud namespace is now simply folded into the new
ensightOutput namespace.
These changes clean up some code, reduce fragmentation and
duplication and removes the previous libconversion dependency for
sampling.
- use int for ensight nTypes constexpr
Note: issue #1176 is unaffected except for the change in file name:
ensightOutputTemplates.C -> ensightOutputVolFieldTemplates.C
- align input parameters and some of the behaviour with vtkWrite
The output is now postProcessing/<name> for similar reasoning as
mentioned in #866 - better alignment with other function objects, no
data collision with foamToEnsight output.
- separate controls for internal and boundary meshes
- can restrict conversion based on zone names, enclosing volumes,
bounding box.
- more dictionary-like methods, enforce keyType::LITERAL for all
lookups to avoid any spurious keyword matching.
- new readEntry, readIfPresent methods
- The get() method replaces the now deprecate lookup() method.
- Deprecate lookupOrFailsafe()
Failsafe behaviour is now an optional parameter for lookupOrDefault,
which makes it easier to tailor behaviour at runtime.
- output of the names is now always flatted without line-breaks.
Thus,
os << flatOutput(someEnumNames.names()) << nl;
os << someEnumNames << nl;
both generate the same output.
- Constructor now uses C-string (const char*) directly instead of
Foam::word in its initializer_list.
- Remove special enum + initializer_list constructor form since
it can create unbounded lookup indices.
- Removd old hasEnum, hasName forms that were provided during initial
transition from NamedEnum.
- Added static_assert on Enum contents to restrict to enum or
integral values. Should not likely be using this class to enumerate
other things since it internally uses an 'int' for its values.
Changed volumeType accordingly to enumerate on its type (enum),
not the class itself.
New name: findObject(), cfindObject()
Old name: lookupObjectPtr()
Return a const pointer or nullptr on failure.
New name: findObject()
Old name: --
Return a non-const pointer or nullptr on failure.
New name: getObjectPtr()
Old name: lookupObjectRefPtr()
Return a non-const pointer or nullptr on failure.
Can be called on a const object and it will perform a
const_cast.
- use these updated names and functionality in more places
NB: The older methods names are deprecated, but continue to be defined.
- same as !isPattern(), but can be more readable.
- add wordRe enum state 'UNKNOWN', which has the identical value as
'DETECT' but used for a return value.
- for larger problems with a smaller region of interest, can apply a
bounding to limit the size of the ensight geometry and fields created.
Since the implementation uses a fvMeshSubset, there is an additional
per-process memory overhead.
A high output frequency should be avoided with moving meshes, since
this indirectly forces a frequent update of the submesh.
- The iterator for a HashSet dereferences directly to its key.
- Eg,
for (const label patchi : patchSet)
{
...
}
vs.
forAllConstIter(labelHashSet, patchSet, iter)
{
const label patchi = iter.key();
...
}
- IOstreamOption class to encapsulate format, compression, version.
This is ordered to avoid internal padding in the structure, which
reduces several bytes of memory overhead for stream objects
and other things using this combination of data.
Byte-sizes:
old IOstream:48 PstreamBuffers:88 Time:928
new IOstream:24 PstreamBuffers:72 Time:904
====
STYLE: remove support for deprecated uncompressed/compressed selectors
In older versions, the system/controlDict used these types of
specifications:
writeCompression uncompressed;
writeCompression compressed;
As of DEC-2009, these were deprecated in favour of using normal switch
names:
writeCompression true;
writeCompression false;
writeCompression on;
writeCompression off;
Now removed these deprecated names and treat like any other unknown
input and issue a warning. Eg,
Unknown compression specifier 'compressed', assuming no compression
====
STYLE: provide Enum of stream format names (ascii, binary)
====
COMP: fixed incorrect IFstream construct in FIREMeshReader
- spurious bool argument (presumably meant as uncompressed) was being
implicitly converted to a versionNumber. Now caught by making
IOstreamOption::versionNumber constructor explicit.
- bad version specifier in changeDictionary
Improve alignment of its behaviour with std::unique_ptr
- element_type typedef
- release() method - identical to ptr() method
- get() method to get the pointer without checking and without releasing it.
- operator*() for dereferencing
Method name changes
- renamed rawPtr() to get()
- renamed rawRef() to ref(), removed unused const version.
Removed methods/operators
- assignment from a raw pointer was deleted (was rarely used).
Can be convenient, but uncontrolled and potentially unsafe.
Do allow assignment from a literal nullptr though, since this
can never leak (and also corresponds to the unique_ptr API).
Additional methods
- clone() method: forwards to the clone() method of the underlying
data object with argument forwarding.
- reset(autoPtr&&) as an alternative to operator=(autoPtr&&)
STYLE: avoid implicit conversion from autoPtr to object type in many places
- existing implementation has the following:
operator const T&() const { return operator*(); }
which means that the following code works:
autoPtr<mapPolyMesh> map = ...;
updateMesh(*map); // OK: explicit dereferencing
updateMesh(map()); // OK: explicit dereferencing
updateMesh(map); // OK: implicit dereferencing
for clarity it may preferable to avoid the implicit dereferencing
- prefer operator* to operator() when deferenced a return value
so it is clearer that a pointer is involve and not a function call
etc Eg, return *meshPtr_; vs. return meshPtr_();
- disable automatically upgrading copyrights in files since changes to
not automatically imply a change in copyright. Eg, fixing a typo in
comments, or changing a variable from 'loopI' to 'loopi' etc.
- make construct from UList explicit and provide corresponding
assignment operator.
- add construct,insert,set,assignment from FixedList.
This is convenient when dealing with things like edges or triFaces.
