- use allocator class to wrap the stream pointers instead of passing
them into ISstream, OSstream and using a dynamic cast to delete
then. This is especially important if we will have a bidirectional
stream (can't delete twice!).
STYLE:
- file stream constructors with std::string (C++11)
- for rewind, explicit about in|out direction. This is not currently
important, but avoids surprises with any future bidirectional access.
- combined string streams in StringStream.H header.
Similar to <sstream> include that has both input and output string
streams.
Community contribution from Johan Roenby, DHI
IsoAdvector is a geometric Volume-of-Fluid method for advection of a
sharp interface between two incompressible fluids. It works on both
structured and unstructured meshes with no requirements on cell shapes.
IsoAdvector is as an alternative choice for the interface compression
treatment with the MULES limiter implemented in the interFoam family
of solvers.
The isoAdvector concept and code was developed at DHI and was funded
by a Sapere Aude postdoc grant to Johan Roenby from The Danish Council
for Independent Research | Technology and Production Sciences (Grant-ID:
DFF - 1337-00118B - FTP).
Co-funding is also provided by the GTS grant to DHI from the Danish
Agency for Science, Technology and Innovation.
The ideas behind and performance of the isoAdvector scheme is
documented in:
Roenby J, Bredmose H, Jasak H. 2016 A computational method for sharp
interface advection. R. Soc. open sci. 3: 160405.
[http://dx.doi.org/10.1098/rsos.160405](http://dx.doi.org/10.1098/rsos.160405)
Videos showing isoAdvector's performance with a number of standard
test cases can be found in this youtube channel:
https://www.youtube.com/channel/UCt6Idpv4C8TTgz1iUX0prAA
Project contributors:
* Johan Roenby <jro@dhigroup.com> (Inventor and main developer)
* Hrvoje Jasak <hrvoje.jasak@fsb.hr> (Consistent treatment of
boundary faces including processor boundaries, parallelisation,
code clean up
* Henrik Bredmose <hbre@dtu.dk> (Assisted in the conceptual
development)
* Vuko Vukcevic <vuko.vukcevic@fsb.hr> (Code review, profiling,
porting to foam-extend, bug fixing, testing)
* Tomislav Maric <tomislav@sourceflux.de> (Source file
rearrangement)
* Andy Heather <a.heather@opencfd.co.uk> (Integration into OpenFOAM
for v1706 release)
See the integration repository below to see the full set of changes
implemented for release into OpenFOAM v1706
https://develop.openfoam.com/Community/Integration-isoAdvector
- Remove the unused enums() method since it delivers wholly unreliable
results. It is not guaranteed to cover the full enumeration range,
but only the listed names.
- Remove the unused strings() method.
Duplicated functionality of the words(), but was never used.
- Change access of words() method from static to object.
Better code isolation. Permits the constructor to take over
as the single point of failure for bad input.
- Add values() method
- do not expose internal (HashTable) lookup since it makes it more
difficult to enforce constness and the implementation detail should
not be exposed. However leave toc() and sortedToc() for the interface.
STYLE: relocated NamedEnum under primitives (was containers)
- internal typedef as 'value_type' for some consistency with STL conventions
- ensure that the string-related classes have consistently similar
matching methods. Use operator()(const std::string) as an entry
point for the match() method, which makes it easier to use for
filters and predicates. In some cases this will also permit using
a HashSet as a match predicate.
regExp
====
- the set method now returns a bool to signal that the requested
pattern was compiled.
wordRe
====
- have separate constructors with the compilation option (was previously
a default parameter). This leaves the single parameter constructor
explicit, but the two parameter version is now non-explicit, which
makes it easier to use when building lists.
- renamed compile-option from REGEX (to REGEXP) for consistency with
with the <regex.h>, <regex> header names etc.
wordRes
====
- renamed from wordReListMatcher -> wordRes. For reduced typing and
since it behaves as an entity only slightly related to its underlying
list nature.
- Provide old name as typedef and include for code transition.
- pass through some list methods into wordRes
hashedWordList
====
- hashedWordList[const word& name] now returns a -1 if the name is is
not found in the list of indices. That has been a pending change
ever since hashedWordList was generalized out of speciesTable
(Oct-2010).
- add operator()(const word& name) for easy use as a predicate
STYLE: adjust parameter names in stringListOps
- reflect if the parameter is being used as a primary matcher, or the
matcher will be derived from the parameter.
For example,
(const char* re), which first creates a regExp
versus (const regExp& matcher) which is used directly.
except turbulence and lagrangian which will also be updated shortly.
For example in the nonNewtonianIcoFoam offsetCylinder tutorial the viscosity
model coefficients may be specified in the corresponding "<type>Coeffs"
sub-dictionary:
transportModel CrossPowerLaw;
CrossPowerLawCoeffs
{
nu0 [0 2 -1 0 0 0 0] 0.01;
nuInf [0 2 -1 0 0 0 0] 10;
m [0 0 1 0 0 0 0] 0.4;
n [0 0 0 0 0 0 0] 3;
}
BirdCarreauCoeffs
{
nu0 [0 2 -1 0 0 0 0] 1e-06;
nuInf [0 2 -1 0 0 0 0] 1e-06;
k [0 0 1 0 0 0 0] 0;
n [0 0 0 0 0 0 0] 1;
}
which allows a quick change between models, or using the simpler
transportModel CrossPowerLaw;
nu0 [0 2 -1 0 0 0 0] 0.01;
nuInf [0 2 -1 0 0 0 0] 10;
m [0 0 1 0 0 0 0] 0.4;
n [0 0 0 0 0 0 0] 3;
if quick switching between models is not required.
To support this more convenient parameter specification the inconsistent
specification of seedSampleSet in the streamLine and wallBoundedStreamLine
functionObjects had to be corrected from
// Seeding method.
seedSampleSet uniform; //cloud; //triSurfaceMeshPointSet;
uniformCoeffs
{
type uniform;
axis x; //distance;
// Note: tracks slightly offset so as not to be on a face
start (-1.001 -0.05 0.0011);
end (-1.001 -0.05 1.0011);
nPoints 20;
}
to the simpler
// Seeding method.
seedSampleSet
{
type uniform;
axis x; //distance;
// Note: tracks slightly offset so as not to be on a face
start (-1.001 -0.05 0.0011);
end (-1.001 -0.05 1.0011);
nPoints 20;
}
which also support the "<type>Coeffs" form
// Seeding method.
seedSampleSet
{
type uniform;
uniformCoeffs
{
axis x; //distance;
// Note: tracks slightly offset so as not to be on a face
start (-1.001 -0.05 0.0011);
end (-1.001 -0.05 1.0011);
nPoints 20;
}
}
The standard naming convention for heat flux is "q" and this is used for the
conductive and convective heat fluxes is OpenFOAM. The use of "Qr" for
radiative heat flux is an anomaly which causes confusion, particularly for
boundary conditions in which "Q" is used to denote power in Watts. The name of
the radiative heat flux has now been corrected to "qr" and all models, boundary
conditions and tutorials updated.
- Could be related to interrupted builds.
So if there are any parts of the build that rely on an explicit
'wmakeLnInclude', make sure that the contents are properly updated.
--
ENH: improved feedback from top-level Allwmake
- Report which section (libraries, applications) is being built.
- Provide final summary of date, version, etc, which can be helpful
for later diagnosis or record keeping.
- The -log=XXX option for Allwmake now accepts a directory name
and automatically appends an appropriate log name.
Eg,
./Allwmake -log=logs/ ->> logs/log.linux64GccDPInt32Opt
The default name is built from the value of WM_OPTIONS.
--
BUG: shell not exiting properly in combination with -log option
- the use of 'tee' causes the shell to hang around.
Added an explicit exit to catch this.
--
- Detecting the '-k' (-non-stop) option at the top-level Allwmake, which
may improve robustness.
- Explicit continue-on-error for foamyMesh (as optional component)
- unify format of script messages for better readability
COMP: reduce warnings when building Pstream (old-style casts in openmpi)
- there was a slight mix of MUST_READ and MUST_READ_IF_MODIFIED
but with no obvious code to handle runtime modified values
of the decomposition, or how this works with alternative
dictionaries.
- Cleanup/centralize handling of -decomposeParDict by relocating
common code into argList. Ensures that all processes receive
identical information about the -decomposeParDict opton.
- Only use alternative decomposeParDict for simpleFoam/motorBike
tutorial so that this will be included in the test loop for snappy.
- Added Mattijs' fix for surfaceRedistributePar.
The normal library system() command uses 'fork', which causes
problems on IB+OPENMPI.
STYLE: add Foam:: qualifier to system calls to make them easier to spot.
- patchFields now get mapped (instead of created)
- with -consistent it now maps all patches except for processor ones (they are
the only ones that are processor-local)
- all constraint patches get evaluated after mapping to bring them up to date.
Patch contributed by Mattijs Janssens
Added the option '-subDict' to specify a sub-dictionary if multiple
replacement sets are present in the same file. This also provides
backward compatibility by setting '-subDict dictionaryReplacement'
