a8f4c2f25e
interPhaseChangeFoam: Do not correct phi at start of run
...
During restart correct phi would need the dilatation from the previous time-step.
Alternative is to run potentialFoam on 0 fields to initialise phi.
Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=1299
2014-05-20 16:15:07 +01:00
b602e83da5
rhoPimpleDyMFoam/pEqn: Filter use of meshPhi
2014-05-18 21:31:44 +01:00
e4cecfcdb5
rhoPimpleDyMFoam/correctPhi.H: Add compressibility term in pcorr equation
2014-05-18 21:19:26 +01:00
99d47d85a8
twoPhaseEulerFoam/twoPhaseSystem/diameterModels/IATE: Correct coefficient on dilatation term
...
Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=1291
2014-05-16 13:15:11 +01:00
49c5519be8
multiphaseInterFoam: cache the mixture kinematic viscosity for use in fvOptions etc.
2014-05-13 10:34:33 +01:00
7026e6a6a6
rhoPorousSimpleFoam: remove optional constraints on pEqn as this would violate continuity
2014-05-08 11:55:55 +01:00
24679abcc5
twoPhaseEulerFoam: Add fvOptions support and tutorial
2014-05-08 11:45:50 +01:00
f609ccd76f
fvOptions: Rationalise the rhoEqn.H so that all compressible solvers support mass-sources correctly
2014-05-01 16:11:03 +01:00
e4bb5fa666
potentialFreeSurfaceDyMFoam: New DyM version of potentialFreeSurfaceFoam
...
with tutorial
2014-04-30 16:08:03 +01:00
d6b3f44adb
driftFluxFoam/relativeVelocityModels: added access to mixture
2014-04-30 14:49:38 +01:00
85da9e6a54
twoPhaseEulerFoam: Now in fully-conservative form
2014-04-29 15:47:39 +01:00
40cfbdc74f
Retire settlingFoam: replaced by driftFluxFoam
2014-04-29 14:18:57 +01:00
5bc5647827
driftFluxFoam: write Udm
2014-04-29 14:18:13 +01:00
9873774ee9
VoF solvers: rationalize the relationship between VoF solvers
...
Improve code reuse
Add multiphaseInterDyMFoam
Retire MRFinterFoam -> now handled by interFoam with fvOptions
Update tutorials
2014-04-29 14:16:41 +01:00
3885c4933d
driftFluxFoam: add support for alphaMax and d of the dispersed-phase
2014-04-29 11:42:13 +01:00
78eaf506eb
ENH: execFlowFunctionObjects: load dimensionedFields and uniformDimensionedFields
2014-04-29 10:02:22 +01:00
63bef62f8e
driftFluxFoam: Change turbulence modelling to new templated framework
...
Added k-epsilon model with buoyancy correction
2014-04-28 15:31:28 +01:00
a5f0ea6867
multiphaseInterFoam: Added fvOptions support for MRF etc. and added MRF tutorial
...
Deleted MRFMultiphaseInterFoam
2014-04-23 14:34:07 +01:00
6c1f95cc5f
BUG: fluentMeshToFoam: correct sets addressing
2014-04-22 14:46:27 +01:00
7d6ba40e91
ENH: execFlowFunctionObjects: added End printing
2014-04-22 09:44:49 +01:00
0c181744a2
BUG: Mantis #1259 : created lagrangian turbulence library for new turbulent structure
2014-04-15 16:38:06 +01:00
a840324451
BUG: heat transfer Boussinesq solvers - added fvOptions MRF support - mantis #1267
2014-04-11 12:11:36 +01:00
17a85930eb
ENH: twoPhaseEulerFoam: added new interfacial models
2014-04-07 10:23:02 +01:00
d9f39c10a9
BUG: JohnsonJacksonParticleSlipFvPatchVectorField: using solid turbulent visocity rather than thermo viscosity
2014-04-07 09:30:47 +01:00
caaa5c2e49
BUG: twoPhaseEulerFoam: fixed definition of Nu in RanzMarshall heat transfer model
2014-04-04 11:57:39 +01:00
994dee99df
ENH: createBafflesDict: added comment
2014-04-03 12:35:10 +01:00
17df849a1a
COMP: linear: single precision build
2014-04-01 15:06:19 +01:00
2db489b562
BUG: twoPhaseEulerFoam: fixed definition of drag in kineticTheory turbulence model
2014-04-01 09:12:03 +01:00
c07e1e0486
ENH: twoPhaseEulerFoam: added new interfacial models
2014-03-31 16:59:07 +01:00
18fd5c4eec
ENH: mapFields - added mapMethod to arg notes
2014-03-31 16:57:14 +01:00
32aa0b82c6
BUG: twoPhaseEulerFoam: Fixed JohnsonJackson BCs write
2014-03-27 11:58:15 +00:00
57b968044e
Corrected rho used for yPlus
2014-03-26 15:19:39 +00:00
fcbca30a0d
driftFluxFoam: corrected density to get kinematic viscosity for yPlus
2014-03-26 14:31:09 +00:00
7640ec88b0
driftFluxFoam: Changed the laminar viscosity used in the k-epsilon model that of the mixture
2014-03-26 12:49:18 +00:00
17cea5eb7c
BUG: driftFluxFoam: removed divide by alpha from general Udm model
2014-03-25 16:06:03 +00:00
170fd9e5ec
BUG: twoPhaseEulerFoam: Fixed JohnsonJackson Theta BC write
2014-03-25 14:36:18 +00:00
7033b6aa5e
ENH: twoPhaseEulerFoam: Added Johnson-Jackson slip and granular temperature BCs
2014-03-24 10:30:41 +00:00
8e76c66558
ENH: redistributePar: start with all patches present
2014-03-20 16:46:38 +00:00
cab71bd05f
pimpleFoam: Added support for fixedFluxPressure BC
2014-03-20 16:34:31 +00:00
9183fe2060
ENH: twoPhaseEulerFoam: cached some fields in the kinetic theory model for lookup elsewhere
2014-03-20 11:56:27 +00:00
110968a5da
Improved calculation of div(U) using the volumetric flux
2014-03-18 23:19:41 +00:00
acb63f5141
BUG: twoPhaseEulerFoam: corrected the definintion of K in turbulence models and in the segregated drag model
2014-03-18 15:03:41 +00:00
e71b49311c
STYLE: twoPhaseEulerFoam: updated interfacial model headers to reflect changes in the definition of K
2014-03-18 09:07:35 +00:00
cfdd46ef15
Separate convection and diffusion terms in the MULEScorr predictor
...
to remove interaction of the diffusion term with the flux-correction.
2014-03-17 22:38:53 +00:00
e6236340b5
Removed alphaOuterCorrectors option because the mass-flux should be updated for all PIMPLE iterations
...
Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=1225
2014-03-17 21:31:09 +00:00
37c75a8b18
BUG: twoPhaseEulerFoam: removed multiple of the continuous phase fraction from force and heat transfer models
2014-03-17 16:34:32 +00:00
b766becf56
Added makeRelative for MRF
...
Resolves bug report http://www.openfoam.org/mantisbt/view.php?id=1221
2014-03-14 08:25:45 +00:00
c67779b221
ENH: refineHexMesh: add option to keep to 2:1 ratio outside cellSet
2014-03-11 10:51:57 +00:00
dd0efd159d
twoPhaseEulerFoam: added optional alphaMax to phaseModel for MULES limiter
...
Resolves bug-report http://www.openfoam.org/mantisbt/view.php?id=1209
2014-03-07 23:32:00 +00:00
cda70b5eb7
driftFluxFoam: Created special mixture viscosity framework for interacting phases
...
Added Thomas' slurry model
2014-03-06 17:54:27 +00:00
