- fits better into the general sampling framework, improves flexibilty
and allows code reduction.
ENH: include surface fields on sampledSurfaces that support it
- tutorials based on squareBend used Default_Boundary_Region explicitly
defined since they predated the defaultPatch renaming (2008).
The name 'Default_Boundary_Region' was for convenience as the default
name when converting to PROSTAR or CCM formation, but can now be
changed to something more generic.
- define wall boundary conditions for squareBend using a general regex
to allow future splitting of wall types by name.
- 'signed' input parameter only mandatory for distance > 0.
A distance <= 0 is always signed and the input parameter is ignored.
- Use normal distance when distance == 0. This has no effect when
the surface has no open edges, but improves on rounding issues
around the zero crossing when the surface has open edges.
This may still need future revisiting.
- takes a direct approach of determining which cells are cut and walks
the cell faces directly to build the resulting surface.
- better handling of corner cases.
* Avoids redundant points when the cut passes exactly through a
mesh point.
* Supresses generation of duplicates faces when the plane cut
coincides exactly with a mesh face.
- for severely concave cells where the plane cuts a face multiple times
there is currently no remedial action taken, except to note the
failure and unwind the insertion of the corresponding points and
faces.
- some paraview versions (eg, on windows) don't support float, only double.
This mostly affected the vtkSurfaceWriter.
The foamToVTK is also affected, but since it also supports the XML
output formats (vtp, vtu) these can be used instead.
- the problem arises since the various surface writers are stateless.
The collated output format hacks around this limitation by adding in
its own fieldDict caching (to disk).
Now include an updateMesh() method to hook into geometry changes.
This is considered a stop-gap measure until the surface output
handling is improved.
- improvement documentation for surface sampling.
- can now specify alternative sampling scheme for obtaining the
face values instead of just using the "cell" value. For example,
sampleScheme cellPoint;
This can be useful for cases when the surface is close to a boundary
cell and there are large gradients in the sampled field.
- distanceSurface now handles non-closed surfaces more robustly.
Unknown regions (not inside or outside) are marked internally and
excluded from consideration. This allows use of 'signed' surfaces
where not previously possible.
Within decomposeParDict, it is now possible to specify a different
decomposition method, methods coefficients or number of subdomains
for each region individually.
The top-level numberOfSubdomains remains mandatory, since this
specifies the number of domains for the entire simulation.
The individual regions may use the same number or fewer domains.
Any optional method coefficients can be specified in a general
"coeffs" entry or a method-specific one, eg "metisCoeffs".
For multiLevel, only the method-specific "multiLevelCoeffs" dictionary
is used, and is also mandatory.
----
ENH: shortcut specification for multiLevel.
In addition to the longer dictionary form, it is also possible to
use a shorter notation for multiLevel decomposition when the same
decomposition method applies to each level.
- although this has been supported for many years, the tutorials
continued to use "convertToMeters" entry, which is specific to blockMesh.
The "scale" is more consistent with other dictionaries.
ENH:
- ignore "scale 0;" (treat as no scaling) for blockMeshDict,
consistent with use elsewhere.
Both stardard SIMPLE and the SIMPLEC (using the 'consistent' option in
fvSolution) are now supported for both subsonic and transonic flow of all
fluid types.
rhoSimpleFoam now instantiates the lower-level fluidThermo which instantiates
either a psiThermo or rhoThermo according to the 'type' specification in
thermophysicalProperties, e.g.
thermoType
{
type hePsiThermo;
mixture pureMixture;
transport sutherland;
thermo janaf;
equationOfState perfectGas;
specie specie;
energy sensibleInternalEnergy;
}
instantiates a psiThermo for a perfect gas with JANAF thermodynamics, whereas
thermoType
{
type heRhoThermo;
mixture pureMixture;
properties liquid;
energy sensibleInternalEnergy;
}
mixture
{
H2O;
}
instantiates a rhoThermo for water, see new tutorial
compressible/rhoSimpleFoam/squareBendLiq.
In order to support complex equations of state the pressure can no longer be
unlimited and rhoSimpleFoam now limits the pressure rather than the density to
handle start-up more robustly.
For backward compatibility 'rhoMin' and 'rhoMax' can still be used in the SIMPLE
sub-dictionary of fvSolution which are converted into 'pMax' and 'pMin' but it
is better to set either 'pMax' and 'pMin' directly or use the more convenient
'pMinFactor' and 'pMinFactor' from which 'pMax' and 'pMin' are calculated using
the fixed boundary pressure or reference pressure e.g.
SIMPLE
{
nNonOrthogonalCorrectors 0;
pMinFactor 0.1;
pMaxFactor 1.5;
transonic yes;
consistent yes;
residualControl
{
p 1e-3;
U 1e-4;
e 1e-3;
"(k|epsilon|omega)" 1e-3;
}
}
