- the gcc c++/9 includes now inline strncpy, which obliterates
the previous method of suppressing the warning.
Now simply allocate additional space for the nul character.
COMP: silence some icc warnings
- indexing error in the output of values resulted in uniform output in
most cases.
- allocation error for on-the-fly triangulation
ENH: changed decomposed storage from DynamicList to plain faceList for
clearer allocation control and better overhead
Including `nu` in `DphitEff` even though it is not present in (LUU:Eq. 17)
provided higher level of resemblance to benchmarks for the tests considered,
particularly for the peak skin friction (yet, pressure-related predictions
were unaffected). Users can switch off `nu` in `DphitEff` by using
`includeNu` entry in `kEpsilonPhitFCoeffs` in order to follow the
reference paper thereat. `includeNu` is left `true` by default.
See GitLab issue #1560,
LUU: Laurence, D. R., Uribe, J. C., & Utyuzhnikov, S. V. (2005).
When more than one volumetric B-Splines control boxes are present, the
sensitivity constituents corresponding to the non-active design
variables were not bounded(zeroed) correctly. The resultant
sensitivities, used in the optimization, were bounded correctly, so this
was more a bug pertaining to the output file of the sensitivities rather
than a functional one.
When activeDesignVariables are not set explicitly, all design variables
are treated as active. These were allocated properly when starting from
0 but not when starting from an intermediate optimisation cycle
(e.g. running 5 optimisation cycles, stopping and restarting).
TUT: added a new tutorial including the restart of an optimisation run
to help identify future regression
The controlBoxes wordList was removed from NURBS3DVolume in the
pre-release phase but writeMorpherCPs was not updated accordingly.
TUT: added the invocation of writeMorpherCPs in one of the tutotials to
help identify future regression
- The core of the FatalIOError message was not printed due to exiting
with FatalError instead of FatalIOError
- Changed the TypeName in all derived classes of displacementMethod so
that the toc printed by the FatalIOError corresponds to what the user
should add in dynamicMeshDict
When a contact resistance is used the T field on each coupled
patch is different due to the thermal resistance. Thus, instead
of solving for a unique Tw at the wall, we solve for Tw1 at one side
then, the Tnbr internal becomes Tw2, which is the T of the nbr
patch.
Many possibilities:
- use as a simple calculator with vectors, tensors etc.
- test validity of expression syntax
As a calculator:
foamCalc '(vector(1,2,3) ^ vector(4,5,6)) * sqrt(34)'
The same, but with debugging:
foamCalc -debug-switch fieldExpr=6 \
'mag((vector(1,2,3) ^ vector(4,5,6))) * sqrt(34)'
- previously just reported gcc/clang versions, but these are not
necessarily the ones actually being used (eg, clang-9 vs clang).
Now use the path from `wmake -show-path-cxx` to improve the accuracy,
and also support other compiler types.
1) New skewCorrectedSnGrad for non-orthogonal and skewness corrector
2) New freeSurfacePressure and freeSurfacePressure working with
interfaceTrackingFvMesh
3) New interfaceTrackingFvMesh
- now use debug 2 for scanner and debug 4 for parser.
Provided better feedback about what is being parsed (debug mode)
- relocate debug application to applications/tools/foamExprParserInfo
See GL #1433
Applies corrections to turbulence kinetic energy equation and turbulence
viscosity field for incompressible multiphase flow cases.
Turbulence kinetic energy is over-predicted in VOF solvers at the phase
interface and throughout the water column in nearly-potential flow regions
beneath surface waves.
This fvOption applies corrections based on the references:
Buoyancy source term in turbulence kinetic energy equation:
Devolder, B., Rauwoens, P., and Troch, P. (2017).
Application of a buoyancy-modified k-w SST turbulence model to
simulate wave run-up around a monopile subjected to regular waves
using OpenFOAM.
Coastal Engineering, 125, 81-94.
Correction to turbulence viscosity field:
Larsen, B.E. and Fuhrman, D.R. (2018).
On the over-production of turbulence beneath surface waves in
Reynolds-averaged Navier-Stokes models
J. Fluid Mech, 853, 419-460
Example usage:
multiphaseStabilizedTurbulence1
{
type multiphaseStabilizedTurbulence;
active yes;
multiphaseStabilizedTurbulenceCoeffs
{
// Optional coefficients
lambda2 0.1; // A value of 0 sets the nut correction to 0
Cmu 0.09; // from k-epsilon model
C 1.51; // model coefficient from k-omega model
alpha 1.36; // 1/Prt
}
}
Thanks go to the Turbulence Technical Committee, and the useful discussions
with and code testing by Bjarke Eltard-Larsen and David Fuhrman (Technical
University of Denmark).
ENH: modify fWallFunction for kEpsilonPhitF model
The k-epsilon-phit-f turbulence closure model for incompressible and
compressible flows.
The model is a three-transport-equation linear-eddy-viscosity turbulence
closure model alongside an elliptic relaxation equation:
- Turbulent kinetic energy, \c k,
- Turbulent kinetic energy dissipation rate, \c epsilon,
- Normalised wall-normal fluctuating velocity scale, \c phit,
- Elliptic relaxation factor, \c f.
Reference:
\verbatim
Standard model (Tag:LUU):
Laurence, D. R., Uribe, J. C., & Utyuzhnikov, S. V. (2005).
A robust formulation of the v2−f model.
Flow, Turbulence and Combustion, 73(3-4), 169–185.
DOI:10.1007/s10494-005-1974-8
\endverbatim
The default model coefficients are (LUU:Eqs. 19-20):
\verbatim
kEpsilonPhitFCoeffs
{
Cmu 0.22, // Turbulent viscosity constant
Ceps1a 1.4, // Model constant for epsilon
Ceps1b 1.0, // Model constant for epsilon
Ceps1c 0.05, // Model constant for epsilon
Ceps2 1.9, // Model constant for epsilon
Cf1 1.4, // Model constant for f
Cf2 0.3, // Model constant for f
CL 0.25, // Model constant for L
Ceta 110.0, // Model constant for L
CT 6.0, // Model constant for T
sigmaK 1.0, // Turbulent Prandtl number for k
sigmaEps 1.3, // Turbulent Prandtl number for epsilon
sigmaPhit 1.0, // Turbulent Prandtl number for phit = sigmaK
}
\endverbatim
Note
The name of the original variable replacing 'v2' is 'phi' (LUU:Eq. 14).
However, the name 'phi' preexisted in OpenFOAM; therefore, this name was
replaced by 'phit'
