CONFIG: backport of META-INFO information (#1367)

- add support by using updated foamEtcFile from 1806, which also add
  the '-config' short-cut option.

META-INFO/.gitignore

@@ -0,0 +1,9 @@
+# Do not track build information
+build-info
+
+# Do not track time-stamp
+time-stamp
+
+# Do not track any manifest files
+Manifest.txt
+manifest.txt

META-INFO/README.md

@@ -0,0 +1,5 @@
+# META-INFO
+
+Meta-information is for OpenFOAM internal use only.
+
+(Backport from 1812)

META-INFO/api-info

@@ -0,0 +1,2 @@
+api=1706
+patch=180618

applications/solvers/heatTransfer/chtMultiRegionFoam/chtMultiRegionSimpleFoam/fluid/UEqn.H

@@ -16,17 +16,20 @@
 
     fvOptions.constrain(UEqn);
 
-    solve
-    (
-        UEqn
-     ==
-        fvc::reconstruct
+    if (momentumPredictor)
+    {
+        solve
         (
+            UEqn
+        ==
+            fvc::reconstruct
             (
-              - ghf*fvc::snGrad(rho)
-              - fvc::snGrad(p_rgh)
-            )*mesh.magSf()
-        )
-    );
+                (
+                - ghf*fvc::snGrad(rho)
+                - fvc::snGrad(p_rgh)
+                )*mesh.magSf()
+            )
+        );
 
-    fvOptions.correct(U);
+        fvOptions.correct(U);
+    }

applications/solvers/heatTransfer/chtMultiRegionFoam/chtMultiRegionSimpleFoam/fluid/readFluidMultiRegionSIMPLEControls.H

@@ -2,3 +2,6 @@
 
     const int nNonOrthCorr =
         simple.lookupOrDefault<int>("nNonOrthogonalCorrectors", 0);
+
+    const bool momentumPredictor =
+        simple.lookupOrDefault("momentumPredictor", true);

applications/solvers/heatTransfer/thermoFoam/EEqn.H

@@ -15,12 +15,16 @@
             )
           : -dpdt
         )
-      - fvm::laplacian(alphaEff, he)
      ==
         radiation->Sh(thermo, he)
       + fvOptions(rho, he)
     );
 
+    if (turbulence.valid())
+    {
+        EEqn -= fvm::laplacian(turbulence->alphaEff(), he);
+    }
+
     EEqn.relax();
 
     fvOptions.constrain(EEqn);

applications/solvers/heatTransfer/thermoFoam/createFields.H

@@ -35,7 +35,31 @@ volVectorField U
 
 #include "compressibleCreatePhi.H"
 
-#include "setAlphaEff.H"
+autoPtr<compressible::turbulenceModel> turbulence;
+
+IOobject turbulencePropertiesHeader
+(
+    "turbulenceProperties",
+    runTime.constant(),
+    mesh,
+    IOobject::MUST_READ_IF_MODIFIED,
+    IOobject::NO_WRITE,
+    false
+);
+
+if (turbulencePropertiesHeader.typeHeaderOk<IOdictionary>(false))
+{
+    Info<< "Creating turbulence model\n" << endl;
+
+    turbulence =
+        compressible::turbulenceModel::New
+        (
+            rho,
+            U,
+            phi,
+            thermo
+        );
+}
 
 #include "createDpdt.H"
 

applications/solvers/heatTransfer/thermoFoam/setAlphaEff.H

@@ -1,47 +0,0 @@
-Info<< "Creating turbulence model\n" << endl;
-tmp<volScalarField> talphaEff;
-
-IOobject turbulencePropertiesHeader
-(
-    "turbulenceProperties",
-    runTime.constant(),
-    mesh,
-    IOobject::MUST_READ_IF_MODIFIED,
-    IOobject::NO_WRITE,
-    false
-);
-
-if (turbulencePropertiesHeader.typeHeaderOk<IOdictionary>(false))
-{
-    autoPtr<compressible::turbulenceModel> turbulence
-    (
-        compressible::turbulenceModel::New
-        (
-            rho,
-            U,
-            phi,
-            thermo
-        )
-    );
-
-    talphaEff = turbulence->alphaEff();
-}
-else
-{
-    talphaEff = tmp<volScalarField>
-    (
-        new volScalarField
-        (
-            IOobject
-            (
-                "alphaEff",
-                runTime.timeName(),
-                mesh,
-                IOobject::NO_READ,
-                IOobject::NO_WRITE
-            ),
-            mesh,
-            dimensionedScalar("0", dimMass/dimLength/dimTime, 0.0)
-        )
-    );
-}

applications/solvers/heatTransfer/thermoFoam/thermoFoam.C

@@ -54,8 +54,6 @@ int main(int argc, char *argv[])
     #include "createFields.H"
     #include "createFvOptions.H"
 
-    const volScalarField& alphaEff = talphaEff();
-
     // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
     Info<< "\nEvolving thermodynamics\n" << endl;

applications/solvers/multiphase/interFoam/overInterDyMFoam/createDyMControls.H

@@ -23,3 +23,8 @@ bool ddtCorr
 (
     pimple.dict().lookupOrDefault("ddtCorr", true)
 );
+
+bool adjustFringe
+(
+    pimple.dict().lookupOrDefault("oversetAdjustPhi", false)
+);

applications/solvers/multiphase/interFoam/overInterDyMFoam/interDyMFoam.C

@@ -53,6 +53,7 @@ Description
 #include "interpolationCellPoint.H"
 #include "transform.H"
 #include "fvMeshSubset.H"
+#include "oversetAdjustPhi.H"
 
 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
@@ -64,7 +65,7 @@ int main(int argc, char *argv[])
     #include "createTime.H"
     #include "createDynamicFvMesh.H"
     #include "initContinuityErrs.H"
-    #include "createControl.H"
+    pimpleControl pimple(mesh);
     #include "createTimeControls.H"
     #include "createDyMControls.H"
     #include "createFields.H"

applications/solvers/multiphase/interFoam/overInterDyMFoam/pEqn.H

@@ -38,6 +38,13 @@
 
     phiHbyA += phig;
 
+    if (adjustFringe)
+    {
+        fvc::makeRelative(phiHbyA, U);
+        oversetAdjustPhi(phiHbyA, U);
+        fvc::makeAbsolute(phiHbyA, U);
+    }
+
     // Update the pressure BCs to ensure flux consistency
     constrainPressure(p_rgh, U, phiHbyA, rAUf, MRF);
 
@@ -64,7 +71,8 @@
                 "minGradP",
                 fvc::reconstruct((phig - p_rghEqn.flux())/rAUf)
             );
-            U = HbyA + rAU*cellMask*minGradP;
+            //U = HbyA + rAU*cellMask*minGradP;
+            U = fvc::reconstruct(phi);
             U.correctBoundaryConditions();
             fvOptions.correct(U);
         }

applications/solvers/multiphase/interFoam/overInterDyMFoam/readControls.H

@@ -11,5 +11,6 @@ moveMeshOuterCorrectors =
 massFluxInterpolation =
     pimple.dict().lookupOrDefault("massFluxInterpolation", false);
 
-ddtCorr =
-    pimple.dict().lookupOrDefault("ddtCorr", true);
+ddtCorr = pimple.dict().lookupOrDefault("ddtCorr", true);
+
+adjustFringe =  pimple.dict().lookupOrDefault("oversetAdjustPhi", false);

applications/solvers/multiphase/reactingEulerFoam/interfacialModels/dragModels/Ergun/Ergun.C

@@ -63,7 +63,7 @@ Foam::dragModels::Ergun::~Ergun()
 Foam::tmp<Foam::volScalarField> Foam::dragModels::Ergun::CdRe() const
 {
     return
-        (4/3)
+        (4.0/3.0)
        *(
             150
            *max

applications/solvers/multiphase/reactingEulerFoam/interfacialModels/dragModels/Gibilaro/Gibilaro.C

@@ -68,7 +68,7 @@ Foam::tmp<Foam::volScalarField> Foam::dragModels::Gibilaro::CdRe() const
     );
 
     return
-        (4/3)
+        (4.0/3.0)
        *(17.3/alpha2 + 0.336*pair_.Re())
        *max(pair_.continuous(), pair_.continuous().residualAlpha())
        *pow(alpha2, -2.8);

applications/solvers/multiphase/twoPhaseEulerFoam/interfacialModels/dragModels/Ergun/Ergun.C

@@ -63,7 +63,7 @@ Foam::dragModels::Ergun::~Ergun()
 Foam::tmp<Foam::volScalarField> Foam::dragModels::Ergun::CdRe() const
 {
     return
-        (4/3)
+        (4.0/3.0)
        *(
             150
            *max

applications/solvers/multiphase/twoPhaseEulerFoam/interfacialModels/dragModels/Gibilaro/Gibilaro.C

@@ -68,7 +68,7 @@ Foam::tmp<Foam::volScalarField> Foam::dragModels::Gibilaro::CdRe() const
     );
 
     return
-        (4/3)
+        (4.0/3.0)
        *(17.3/alpha2 + 0.336*pair_.Re())
        *max(pair_.continuous(), pair_.continuous().residualAlpha())
        *pow(alpha2, -2.8);

applications/utilities/miscellaneous/foamHelp/foamHelp.C

@@ -45,7 +45,7 @@ int main(int argc, char *argv[])
     #include "addToolOption.H"
 
     // Intercept request for help
-    if ((argc > 0) && (strcmp(argv[1], "-help") == 0))
+    if ((argc > 1) && (strcmp(argv[1], "-help") == 0))
     {
         #include "setRootCase.H"
     }

applications/utilities/preProcessing/wallFunctionTable/tabulatedWallFunction/SpaldingsLaw/SpaldingsLaw.C

@@ -91,7 +91,7 @@ void Foam::tabulatedWallFunctions::SpaldingsLaw::invertFunction()
                 (
                     2*E_*uPlus
                   + exp(kUPlus)*(kUPlus + 1)
-                  - 2/3*pow3(kUPlus)
+                  - 2.0/3.0*pow3(kUPlus)
                   - 1.5*sqr(kUPlus)
                   - 2*kUPlus
                   - 1

bin/foamEtcFile

@@ -3,38 +3,34 @@
 # =========                 |
 # \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
 #  \\    /   O peration     |
-#   \\  /    A nd           | Copyright (C) 2011-2016 OpenFOAM Foundation
-#    \\/     M anipulation  | Copyright (C) 2017 OpenCFD Ltd.
+#   \\  /    A nd           | Copyright (C) 2008-2011, 2017-2018 OpenCFD Ltd.
+#    \\/     M anipulation  |
 #-------------------------------------------------------------------------------
+#                           | Copyright (C) 2011-2016 OpenFOAM Foundation
+#------------------------------------------------------------------------------
 # License
-#     This file is part of OpenFOAM.
-#
-#     OpenFOAM is free software: you can redistribute it and/or modify it
-#     under the terms of the GNU General Public License as published by
-#     the Free Software Foundation, either version 3 of the License, or
-#     (at your option) any later version.
-#
-#     OpenFOAM is distributed in the hope that it will be useful, but WITHOUT
-#     ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-#     FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-#     for more details.
-#
-#     You should have received a copy of the GNU General Public License
-#     along with OpenFOAM.  If not, see <http://www.gnu.org/licenses/>.
+#     This file is part of OpenFOAM, licensed under GNU General Public License
+#     <http://www.gnu.org/licenses/>.
 #
 # Script
 #     foamEtcFile
 #
 # Description
-#     Locate user/group/other files with semantics similar to the
-#     ~OpenFOAM/fileName expansion.
+#     Locate user/group/other file as per '#includeEtc'.
 #
-#     The -mode option can be used to allow chaining from
-#     personal settings to site-wide settings.
+#     The -mode option can be used to allow chaining from personal settings
+#     to site-wide settings.
 #
-#     For example, within the user ~/.OpenFOAM/<VER>/prefs.sh:
+#     For example, within the user ~/.OpenFOAM/<VER>/config.sh/compiler:
 #     \code
-#        eval $(foamEtcFile -sh -mode=go prefs.sh)
+#        eval $(foamEtcFile -sh -mode=go config.sh/compiler)
+#     \endcode
+#
+#     The -mode option is similarly used within etc/{bashrc,cshrc} to ensure
+#     that system prefs are respected:
+#     \code
+#        eval $(foamEtcFile -sh -mode=o  prefs.sh)
+#        eval $(foamEtcFile -sh -mode=ug prefs.sh)
 #     \endcode
 #
 # Environment
@@ -46,42 +42,42 @@
 #     This script must exist in one of these locations:
 #     - $WM_PROJECT_INST_DIR/OpenFOAM-<VERSION>/bin
 #     - $WM_PROJECT_INST_DIR/openfoam-<VERSION>/bin
-#     - $WM_PROJECT_INST_DIR/OpenFOAM+<VERSION>/bin
-#     - $WM_PROJECT_INST_DIR/openfoam+<VERSION>/bin
 #     - $WM_PROJECT_INST_DIR/openfoam<VERSION>/bin  (debian version)
 #
 #-------------------------------------------------------------------------------
-unset optQuiet optSilent
-usage() {
-    [ "${optQuiet:-$optSilent}" = true ] && exit 1
-    exec 1>&2
-    while [ "$#" -ge 1 ]; do echo "$1"; shift; done
+printHelp() {
     cat<<USAGE
 
-Usage: foamEtcFile [OPTION] fileName
+Usage: foamEtcFile [OPTION] fileName [-- args]
        foamEtcFile [OPTION] [-list|-list-test] [fileName]
 
 options:
-  -a, -all          Return all files (otherwise stop after the first match)
-  -l, -list         List directories or files to be checked
+  -all (-a)         Return all files (otherwise stop after the first match)
+  -list (-l)        List directories or files to be checked
   -list-test        List (existing) directories or files to be checked
   -mode=MODE        Any combination of u(user), g(group), o(other)
   -prefix=DIR       Specify an alternative installation prefix
   -version=VER      Specify alternative OpenFOAM version (eg, 3.0, 1612, ...)
-  -csh | -sh        Produce output suitable for a csh or sh 'eval'
-  -csh-verbose | -sh-verbose
-                    As per -csh | -sh, with additional verbosity
-  -q, -quiet        Suppress all normal output
-  -s, -silent       Suppress stderr, except -csh-verbose, -sh-verbose output
+  -csh              Produce 'source FILE' output for a csh eval
+  -sh               Produce '. FILE' output for a sh eval
+  -csh-verbose      As per -csh, with additional verbosity
+  -sh-verbose       As per -sh,  with additional verbosity
+  -config           Add config directory prefix for shell type:
+                        with -csh* for a config.csh/ prefix
+                        with -sh*  for a config.sh/ prefix
+  -show-api         Print api value from wmake/rules, or meta-info and exit
+  -show-patch       Print patch value from meta-info and exit
+  -quiet (-q)       Suppress all normal output
+  -silent (-s)      Suppress stderr, except -csh-verbose, -sh-verbose output
   -help             Print the usage
 
-Locate user/group/other file with semantics similar to the
-~OpenFOAM/fileName expansion.
+Locate user/group/other file as per '#includeEtc'
 
-Single character options must not be grouped. Equivalent options:
-    -mode=MODE,   -mode MODE,   -m MODE
-    -prefix=DIR,  -prefix DIR,  -p DIR
-    -version=VER, -version VER, -v VER
+Do not group single character options.
+Equivalent options:
+  |  -mode=MODE     |  -mode MODE     | -m MODE
+  |  -prefix=DIR    |  -prefix DIR    | -p DIR
+  |  -version=VER   |  -version VER   | -v VER
 
 Exit status
     0  when the file is found. Print resolved path to stdout.
@@ -89,9 +85,10 @@ Exit status
     2  when the file is not found.
 
 USAGE
-    exit 1
+    exit 0  # A clean exit
 }
 
+unset optQuiet optSilent
 # Report error and exit
 die()
 {
@@ -146,13 +143,6 @@ guessVersion()
         version="${version%%*-}" # Extra safety, eg openfoam-version-packager
         ;;
 
-    (OpenFOAM+* | openfoam+*)
-        # Alternative naming: OpenFOAM+<VERSION> or openfoam+<VERSION>
-        dirBase="${projectDirName%%+*}+"
-        version="${projectDirName#*+}"
-        version="${version%%*-}" # Extra safety, eg openfoam-version-packager
-        ;;
-
     (openfoam[0-9]*)
         # Debian naming: openfoam<VERSION>
         dirBase="openfoam"
@@ -198,31 +188,103 @@ setVersion()
 }
 
 
+#-------------------------------------------------------------------------------
+
+# The API locations. See wmake/wmakeBuildInfo
+rulesFile="$projectDir/wmake/rules/General/general"
+metaInfoDir="$projectDir/META-INFO"
+
+# Get api from rules/General/general
+#
+# Failure modes:
+# - No api information (can't find file etc).
+#   -> Fatal for building, but could be OK for a stripped down version
+#
+# Fallback. Get from api-info
+#
+getApi()
+{
+    local value
+
+    value="$(sed -ne '/^ *#/!{ /WM_VERSION.*OPENFOAM=/{ s@^.*OPENFOAM= *\([0-9][0-9]*\).*@\1@p; q }}' $rulesFile 2>/dev/null)"
+    if [ -z "$value" ] && [ -f "$metaInfoDir/api-info" ]
+    then
+        # Fallback. Get from api-info
+        value="$(sed -ne 's@^ *api *= *\([0-9][0-9]*\).*@\1@p' $metaInfoDir/api-info 2>/dev/null)"
+    fi
+
+    if [ -n "$value" ]
+    then
+        echo "$value"
+    else
+        return 1
+    fi
+}
+
+
+# Get patch from meta-info / api-info
+#
+# Failure modes:
+# - No patch information (can't find file etc).
+#
+getPatchLevel()
+{
+    local value
+
+    # Fallback. Get from api-info
+    value="$(sed -ne 's@^ *patch *= *\([0-9][0-9]*\).*@\1@p' $metaInfoDir/api-info 2>/dev/null)"
+
+    if [ -n "$value" ]
+    then
+        echo "$value"
+    else
+        return 1
+    fi
+}
+
+
+#-------------------------------------------------------------------------------
 optMode=ugo         # Default mode is always 'ugo'
-unset optAll optList optShell optVersion
+unset shellOutput verboseOutput
+unset optAll optConfig optList optVersion
 
 # Parse options
 while [ "$#" -gt 0 ]
 do
     case "$1" in
-    -h | -help)
-        usage
+    -h | -help*)
+        printHelp
+        ;;
+    -show-api)
+        # Show API and exit
+        getApi
+        exit $?
+        ;;
+    -show-patch)
+        # Show patch level and exit
+        getPatchLevel
+        exit $?
         ;;
     -a | -all)
         optAll=true
-        unset optShell
+        unset shellOutput verboseOutput
         ;;
     -l | -list)
         optList=true
-        unset optShell
         ;;
     -list-test)
         optList='test'
-        unset optShell
         ;;
-    -csh | -sh | -csh-verbose | -sh-verbose)
-        optShell="${1#-}"
-        unset optAll
+    -csh | -sh)
+        shellOutput="${1#-}"
+        unset verboseOutput
+        ;;
+    -csh-verbose | -sh-verbose)
+        shellOutput="${1#-}"
+        verboseOutput="source "         # Report: "source FILE"
+        ;;
+    -config)
+        optConfig=true
         ;;
     -mode=[ugo]*)
         optMode="${1#*=}"
@@ -276,9 +338,33 @@ do
     shift
 done
 
-
 #-------------------------------------------------------------------------------
 
+# Split arguments into filename (for searching) and trailing bits for shell eval
+# Silently remove leading ~OpenFOAM/ (as per Foam::findEtcFile)
+nArgs=$#
+fileName="${1#~OpenFOAM/}"
+unset evalArgs
+
+if [ "$nArgs" -eq 1 ]
+then
+    if [ "$1" = "--" ]
+    then
+        nArgs=0
+        unset fileName
+    fi
+elif [ "$nArgs" -ge 2 ]
+then
+    if [ "$2" = "--" ]
+    then
+        nArgs=1
+        shift 2
+        evalArgs="$@"
+    fi
+fi
+
+
+# Get version information
 if [ -n "$optVersion" ]
 then
     setVersion $optVersion
@@ -301,12 +387,6 @@ groupDir="${WM_PROJECT_SITE:-$prefixDir/site}"
 #     eval echo "$i=\$$i" 1>&2
 # done
 
-
-# Save the essential bits of information
-# silently remove leading ~OpenFOAM/ (used in Foam::findEtcFile)
-nArgs=$#
-fileName="${1#~OpenFOAM/}"
-
 # Define the various places to be searched:
 unset dirList
 case "$optMode" in (*u*) # (U)ser
@@ -325,27 +405,61 @@ case "$optMode" in (*o*) # (O)ther == shipped
 esac
 set -- $dirList
 
+[ "$#" -ge 1 ] || die "No directories to scan. Programming error?"
+exitCode=2  # Fallback is a FileNotFound error
+
+
+#
+# Preliminaries
+#
+
+# Special handling of config.sh/ , config.csh/ directories
+if [ -n "$optConfig" -a -n "$shellOutput" -a -n "$fileName" ]
+then
+    case "$shellOutput" in
+    csh*)
+        optConfig="config.csh/"
+        ;;
+    sh*)
+        optConfig="config.sh/"
+        ;;
+    *)
+        unset optConfig
+        ;;
+    esac
+
+    if [ -n "$optConfig" ]
+    then
+        case "$fileName" in
+        /* | config.csh* | config.sh*)
+            # Does not need or cannot add a prefix
+            unset optConfig
+            ;;
+        *)
+            fileName="$optConfig$fileName"
+            ;;
+        esac
+    fi
+fi
+
 
 #
 # The main routine
 #
 
-exitCode=0
 if [ -n "$optList" ]
 then
 
     # List directories, or potential file locations
     [ "$nArgs" -le 1 ] || \
-    die "-list expects 0 or 1 filename, but $nArgs provided"
+        die "-list options expect 0 or 1 filename, but $nArgs provided"
 
-    # A silly combination, but -quiet does have precedence
+    # A silly combination, but -quiet has absolute precedence
     [ -n "$optQuiet" ] && exit 0
 
     # Test for directory or file too?
     if [ "$optList" = "test" ]
     then
-        exitCode=2  # Fallback to a general error (file not found)
-
         if [ "$nArgs" -eq 1 ]
         then
             for dir
@@ -368,6 +482,7 @@ then
             done
         fi
     else
+        exitCode=0  # OK, already verified that $# != 0
         for dir
         do
             echo "$dir${fileName:+/}$fileName"
@@ -378,35 +493,44 @@ else
 
     [ "$nArgs" -eq 1 ] || die "One filename expected - $nArgs provided"
 
-    exitCode=2  # Fallback to a general error (file not found)
+    # Output for sourcing files ("source" for csh, "." for POSIX shell)
+    # Only allow sourcing a single file (disallow combination with -all)
+    case "$shellOutput" in
+    csh*)
+        shellOutput="source "   # eg, "source FILE"
+        ;;
+    sh*)
+        shellOutput=". "        # eg, ". FILE"
+        ;;
+    esac
+
+    # Anti-pattern: -all disables shell commands
+    if [ -n "$optAll" ]
+    then
+        unset shellOutput verboseOutput
+    fi
 
     for dir
     do
-        if [ -f "$dir/$fileName" ]
+        resolved="$dir/$fileName"
+        if [ -f "$resolved" ]
         then
-            exitCode=0
-            [ -n "$optQuiet" ] && break
-
-            case "$optShell" in
-            (*verbose)
-                echo "Using: $dir/$fileName" 1>&2
-                ;;
-            esac
-
-            case "$optShell" in
-            csh*)
-                echo "source $dir/$fileName"
+            exitCode=0  # OK
+            if [ -n "$optQuiet" ]
+            then
                 break
-                ;;
-            sh*)
-                echo ". $dir/$fileName"
-                break
-                ;;
-            *)
-                echo "$dir/$fileName"
-                [ -n "$optAll" ] || break
-                ;;
-            esac
+            elif [ -n "$verboseOutput" ]
+            then
+                echo "$verboseOutput$resolved" 1>&2
+            fi
+
+            if [ -n "$shellOutput" ]
+            then
+                echo "$shellOutput$resolved $evalArgs"
+            else
+                echo "$resolved"
+            fi
+            [ -n "$optAll" ] || break
         fi
     done
 

doc/Doxygen/Doxyfile

@@ -51,7 +51,7 @@ PROJECT_BRIEF          = "The open source CFD toolbox"
 # pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
 # the logo to the output directory.
 
-PROJECT_LOGO           = OpenFOAM-logo2-55x55.png
+PROJECT_LOGO           = OpenFOAMlogo.png
 
 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
 # into which the generated documentation will be written. If a relative path is

etc/caseDicts/createZeroDirectoryTemplates/boundaryConditions/fluid/incompressible/inletOptions

@@ -41,7 +41,7 @@ flowSpecification
         U
         {
             type        flowRateInletVelocity;
-            volumeFlowRate ${:VALUE.volumeFlowRate};
+            volumetricFlowRate ${:VALUE.volumetricFlowRate};
             value       ${:VALUE.U};
         }
         p

src/OpenFOAM/containers/Lists/List/List.C

@@ -231,12 +231,10 @@ Foam::List<T>::List(const PtrList<T>& lst)
 }
 
 
-// Note: using first/last is not entirely accurate.
-// But since the list size is correct, last() is actually ignored.
 template<class T>
 Foam::List<T>::List(const SLList<T>& lst)
 :
-    List<T>(lst.first(), lst.last(), lst.size())
+    List<T>(lst.begin(), lst.end(), lst.size())
 {}
 
 

src/OpenFOAM/db/functionObjects/timeControl/timeControlFunctionObject.C

@@ -724,7 +724,8 @@ bool Foam::functionObjects::timeControl::read(const dictionary& dict)
         executeControl_.read(dict);
         readControls();
 
-        return true;
+        // Forward to underlying function object
+        return foPtr_->read(dict);
     }
     else
     {

src/TurbulenceModels/turbulenceModels/RAS/kOmegaSSTLM/kOmegaSSTLM.C

@@ -373,7 +373,8 @@ kOmegaSSTLM<BasicTurbulenceModel>::kOmegaSSTLM
         alphaRhoPhi,
         phi,
         transport,
-        propertiesName
+        propertiesName,
+        typeName
     ),
 
     ca1_
@@ -477,7 +478,12 @@ kOmegaSSTLM<BasicTurbulenceModel>::kOmegaSSTLM
         this->mesh_,
         dimensionedScalar("0", dimless, 0)
     )
-{}
+{
+    if (type == typeName)
+    {
+        this->printCoeffs(type);
+    }
+}
 
 
 // * * * * * * * * * * * * * * * Member Functions  * * * * * * * * * * * * * //

src/conversion/vtk/output/foamVtkPatchWriter.C

@@ -245,7 +245,7 @@ Foam::vtk::patchWriter::patchWriter
     nFaces_(0)
 {
     outputOptions opts(outOpts);
-    opts.append(false);  // No append
+    opts.append(false);  // No append supported
 
     os_.open((baseName + (legacy_ ? ".vtk" : ".vtp")).c_str());
     format_ = opts.newFormatter(os_);

src/conversion/vtk/output/foamVtkSurfaceMeshWriter.C

@@ -193,7 +193,7 @@ Foam::vtk::surfaceMeshWriter::surfaceMeshWriter
     os_()
 {
     outputOptions opts(outOpts);
-    opts.legacy(true);  // No append supported
+    opts.append(false);  // No append supported
 
     os_.open((baseName + (legacy_ ? ".vtk" : ".vtp")).c_str());
     format_ = opts.newFormatter(os_);

src/fileFormats/nas/NASCore.C

@@ -34,28 +34,33 @@ Foam::fileFormats::NASCore::NASCore()
 
 // * * * * * * * * * * * * * * Member Functions  * * * * * * * * * * * * * * //
 
-Foam::scalar Foam::fileFormats::NASCore::parseNASCoord
-(
-    const string& s
-)
+Foam::scalar Foam::fileFormats::NASCore::parseNASCoord(const string& s)
 {
-    size_t expSign = s.find_last_of("+-");
+    scalar value = 0;
 
-    if (expSign != string::npos && expSign > 0 && !isspace(s[expSign-1]))
+    const size_t expSign = s.find_last_of("+-");
+
+    if (expSign != std::string::npos && expSign > 0 && !isspace(s[expSign-1]))
     {
-        scalar mantissa = readScalar(IStringStream(s.substr(0, expSign))());
-        scalar exponent = readScalar(IStringStream(s.substr(expSign+1))());
+        scalar exponent = 0;
+
+        // Parse as per strtod/strtof - allowing trailing space or [Ee]
+        readScalar(s.substr(0, expSign).c_str(), value);  // mantissa
+        readScalar(s.substr(expSign+1).c_str(),  exponent);
 
         if (s[expSign] == '-')
         {
             exponent = -exponent;
         }
-        return mantissa * pow(10, exponent);
+
+        value *= ::pow(10, exponent);
     }
     else
     {
-        return readScalar(IStringStream(s)());
+        readScalar(s.c_str(), value);
     }
+
+    return value;
 }
 
 

src/fileFormats/nas/NASCore.H

@@ -55,8 +55,8 @@ public:
 
     // Public Member Functions
 
-        //- Do weird things to extract number
-        static scalar parseNASCoord(const string&);
+        //- Extract numbers from things like "-2.358-8" (same as "-2.358e-8")
+        static scalar parseNASCoord(const string& s);
 
 
     // Constructors

src/finiteVolume/fields/fvPatchFields/derived/fan/fanFvPatchField.C

@@ -3,7 +3,7 @@
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
     \\  /    A nd           | Copyright (C) 2011-2015 OpenFOAM Foundation
-     \\/     M anipulation  |
+     \\/     M anipulation  | Copyright (C) 2017 OpenCFD Ltd.
 -------------------------------------------------------------------------------
 License
     This file is part of OpenFOAM.
@@ -49,7 +49,10 @@ Foam::fanFvPatchField<Type>::fanFvPatchField
     uniformJumpFvPatchField<Type>(p, iF),
     phiName_("phi"),
     rhoName_("rho"),
-    uniformJump_(false)
+    uniformJump_(false),
+    nonDimensional_(false),
+    rpm_(0.0),
+    dm_(0.0)
 {}
 
 
@@ -64,8 +67,17 @@ Foam::fanFvPatchField<Type>::fanFvPatchField
     uniformJumpFvPatchField<Type>(p, iF, dict),
     phiName_(dict.lookupOrDefault<word>("phi", "phi")),
     rhoName_(dict.lookupOrDefault<word>("rho", "rho")),
-    uniformJump_(dict.lookupOrDefault<bool>("uniformJump", false))
-{}
+    uniformJump_(dict.lookupOrDefault<bool>("uniformJump", false)),
+    nonDimensional_(dict.lookupOrDefault<Switch>("nonDimensional", false)),
+    rpm_(dict.lookupOrDefault<scalar>("rpm", 0.0)),
+    dm_(dict.lookupOrDefault<scalar>("dm", 0.0))
+{
+    if (nonDimensional_)
+    {
+        dict.lookup("rpm") >> rpm_;
+        dict.lookup("dm") >> dm_;
+    }
+}
 
 
 template<class Type>
@@ -80,7 +92,10 @@ Foam::fanFvPatchField<Type>::fanFvPatchField
     uniformJumpFvPatchField<Type>(ptf, p, iF, mapper),
     phiName_(ptf.phiName_),
     rhoName_(ptf.rhoName_),
-    uniformJump_(ptf.uniformJump_)
+    uniformJump_(ptf.uniformJump_),
+    nonDimensional_(ptf.nonDimensional_),
+    rpm_(ptf.rpm_),
+    dm_(ptf.dm_)
 {}
 
 
@@ -93,7 +108,10 @@ Foam::fanFvPatchField<Type>::fanFvPatchField
     uniformJumpFvPatchField<Type>(ptf),
     phiName_(ptf.phiName_),
     rhoName_(ptf.rhoName_),
-    uniformJump_(ptf.uniformJump_)
+    uniformJump_(ptf.uniformJump_),
+    nonDimensional_(ptf.nonDimensional_),
+    rpm_(ptf.rpm_),
+    dm_(ptf.dm_)
 {}
 
 
@@ -107,7 +125,10 @@ Foam::fanFvPatchField<Type>::fanFvPatchField
     uniformJumpFvPatchField<Type>(ptf, iF),
     phiName_(ptf.phiName_),
     rhoName_(ptf.rhoName_),
-    uniformJump_(ptf.uniformJump_)
+    uniformJump_(ptf.uniformJump_),
+    nonDimensional_(ptf.nonDimensional_),
+    rpm_(ptf.rpm_),
+    dm_(ptf.dm_)
 {}
 
 
@@ -138,6 +159,12 @@ void Foam::fanFvPatchField<Type>::write(Ostream& os) const
     (
         os, "uniformJump", false, uniformJump_
     );
+    this->template writeEntryIfDifferent<bool>
+    (
+        os, "nonDimensional", false, nonDimensional_
+    );
+    this->template writeEntryIfDifferent<scalar>(os, "rpm", 0, rpm_);
+    this->template writeEntryIfDifferent<scalar>(os, "dm", 0, dm_);
 }
 
 

src/finiteVolume/fields/fvPatchFields/derived/fan/fanFvPatchField.H

@@ -3,7 +3,7 @@
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
     \\  /    A nd           | Copyright (C) 2011-2016 OpenFOAM Foundation
-     \\/     M anipulation  |
+     \\/     M anipulation  | Copyright (C) 2017 OpenCFD Ltd.
 -------------------------------------------------------------------------------
 License
     This file is part of OpenFOAM.
@@ -34,6 +34,24 @@ Description
     The jump is specified as a \c Function1 type, to enable the use of, e.g.
     contant, polynomial, table values.
 
+    The switch nonDimensional can be used for a non-dimensional table. It needs
+    inputs rpm and dm of the fan. It should be used with uniformJump true.
+
+    The nonDimensional flux for the table is calculate as :
+
+        phi = 4.0*mDot/(rho*sqr(PI)*dm^3*omega)
+        where:
+            dm is the mean diameter.
+            omega is rad/sec.
+
+    The nonDimensinal pressure :
+
+        Psi = 2 deltaP/(rho*(sqr(PI*omega*dm)))
+        where:
+            deltaP is the pressure drop
+
+    The non-dimensional table should be given as Psi = F(phi).
+
 Usage
     \table
         Property     | Description             | Required    | Default value
@@ -43,6 +61,9 @@ Usage
         rho          | density field name      | no          | none
         uniformJump  | applies a uniform pressure based on the averaged
                        velocity | no | false
+        nonDimensional | uses non-dimensional table | no | false
+        rpm          | fan rpm for non-dimensional table | no | 0.0
+        dm           | mean diameter for non-dimensional table | no | 0.0
     \endtable
 
     Example of the boundary condition specification:
@@ -114,6 +135,17 @@ class fanFvPatchField
         //- Uniform pressure drop
         bool uniformJump_;
 
+        //- Swtich for using non-dimensional curve
+        Switch nonDimensional_;
+
+        // Parameters for non-dimensional table
+
+            //- Fan rpm
+            scalar rpm_;
+
+            //- Fan mean diameter
+            scalar dm_;
+
 
     // Private Member Functions
 

src/finiteVolume/fields/fvPatchFields/derived/fan/fanFvPatchFields.C

@@ -3,7 +3,7 @@
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
     \\  /    A nd           | Copyright (C) 2011-2017 OpenFOAM Foundation
-     \\/     M anipulation  |
+     \\/     M anipulation  | Copyright (C) 2017 OpenCFD Ltd.
 -------------------------------------------------------------------------------
 License
     This file is part of OpenFOAM.
@@ -48,6 +48,15 @@ void Foam::fanFvPatchField<Foam::scalar>::calcFanJump()
         {
             scalar area = gSum(patch().magSf());
             Un = gSum(Un*patch().magSf())/area;
+
+            if (nonDimensional_)
+            {
+                // Create an adimensional volumetric flow rate
+                Un =
+                    120.0*Un/pow3(constant::mathematical::pi)
+                  * patch().magSf()
+                  / pow3(dm_)/rpm_;
+            }
         }
 
         if (phi.dimensions() == dimDensity*dimVelocity*dimArea)
@@ -55,7 +64,18 @@ void Foam::fanFvPatchField<Foam::scalar>::calcFanJump()
             Un /= patch().lookupPatchField<volScalarField, scalar>(rhoName_);
         }
 
-        this->jump_ = max(this->jumpTable_->value(Un), scalar(0));
+        if (nonDimensional_)
+        {
+            scalarField deltap = this->jumpTable_->value(Un);
+            // Convert adimensional deltap from curve into deltaP
+            scalarField pdFan =
+                deltap*pow4(constant::mathematical::pi)*sqr(dm_*rpm_)/1800;
+            this->jump_ = max(pdFan, scalar(0));
+        }
+        else
+        {
+            this->jump_ = max(this->jumpTable_->value(Un), scalar(0));
+        }
     }
 }
 
@@ -73,7 +93,10 @@ Foam::fanFvPatchField<Foam::scalar>::fanFvPatchField
     uniformJumpFvPatchField<scalar>(p, iF),
     phiName_(dict.lookupOrDefault<word>("phi", "phi")),
     rhoName_(dict.lookupOrDefault<word>("rho", "rho")),
-    uniformJump_(dict.lookupOrDefault<bool>("uniformJump", false))
+    uniformJump_(dict.lookupOrDefault<bool>("uniformJump", false)),
+    nonDimensional_(dict.lookupOrDefault<Switch>("nonDimensional", false)),
+    rpm_(dict.lookupOrDefault<scalar>("rpm", 0.0)),
+    dm_(dict.lookupOrDefault<scalar>("dm", 0.0))
 {
     if (this->cyclicPatch().owner())
     {

src/finiteVolume/fields/fvPatchFields/derived/fanPressure/fanPressureFvPatchScalarField.C

@@ -181,7 +181,7 @@ void Foam::fanPressureFvPatchScalarField::updateCoeffs()
     {
         // Create an adimensional flow rate
         volFlowRate =
-            120.0*volFlowRate/pow3(constant::mathematical::pi)/pow3(dm_);
+            120.0*volFlowRate/pow3(constant::mathematical::pi)/pow3(dm_)/rpm_;
     }
 
     // Pressure drop for this flow rate
@@ -190,7 +190,7 @@ void Foam::fanPressureFvPatchScalarField::updateCoeffs()
     if (nonDimensional_)
     {
         // Convert the adimensional deltap from curve into deltaP
-        pdFan = pdFan*pow4(constant::mathematical::pi)*rpm_*sqr(dm_)/1800;
+        pdFan = pdFan*pow4(constant::mathematical::pi)*sqr(dm_*rpm_)/1800;
     }
 
     totalPressureFvPatchScalarField::updateCoeffs

src/finiteVolume/finiteVolume/ddtSchemes/steadyStateDdtScheme/steadyStateDdtScheme.C

@@ -280,7 +280,7 @@ steadyStateDdtScheme<Type>::fvcDdtUfCorr
     const GeometricField<Type, fvsPatchField, surfaceMesh>& Uf
 )
 {
-    return tmp<fluxFieldType>
+    tmp<fluxFieldType> tCorr
     (
         new fluxFieldType
         (
@@ -299,6 +299,10 @@ steadyStateDdtScheme<Type>::fvcDdtUfCorr
             )
         )
     );
+
+    tCorr.ref().setOriented();
+
+    return tCorr;
 }
 
 
@@ -310,7 +314,7 @@ steadyStateDdtScheme<Type>::fvcDdtPhiCorr
     const fluxFieldType& phi
 )
 {
-    return tmp<fluxFieldType>
+    tmp<fluxFieldType> tCorr
     (
         new fluxFieldType
         (
@@ -329,6 +333,10 @@ steadyStateDdtScheme<Type>::fvcDdtPhiCorr
             )
         )
     );
+
+    tCorr.ref().setOriented();
+
+    return tCorr;
 }
 
 
@@ -341,7 +349,7 @@ steadyStateDdtScheme<Type>::fvcDdtUfCorr
     const GeometricField<Type, fvsPatchField, surfaceMesh>& Uf
 )
 {
-    return tmp<fluxFieldType>
+    tmp<fluxFieldType> tCorr
     (
         new fluxFieldType
         (
@@ -362,6 +370,10 @@ steadyStateDdtScheme<Type>::fvcDdtUfCorr
             )
         )
     );
+
+    tCorr.ref().setOriented();
+
+    return tCorr;
 }
 
 
@@ -374,7 +386,7 @@ steadyStateDdtScheme<Type>::fvcDdtPhiCorr
     const fluxFieldType& phi
 )
 {
-    return tmp<fluxFieldType>
+    tmp<fluxFieldType> tCorr
     (
         new fluxFieldType
         (
@@ -395,6 +407,10 @@ steadyStateDdtScheme<Type>::fvcDdtPhiCorr
             )
         )
     );
+
+    tCorr.ref().setOriented();
+
+    return tCorr;
 }
 
 

src/finiteVolume/fvMatrices/solvers/isoAdvection/isoAdvection/isoAdvection.C

@@ -80,7 +80,7 @@ Foam::isoAdvection::isoAdvection
 
     // Tolerances and solution controls
     nAlphaBounds_(dict_.lookupOrDefault<label>("nAlphaBounds", 3)),
-    vof2IsoTol_(dict_.lookupOrDefault<scalar>("vof2IsoTol", 1e-8)),
+    isoFaceTol_(dict_.lookupOrDefault<scalar>("isoFaceTol", 1e-8)),
     surfCellTol_(dict_.lookupOrDefault<scalar>("surfCellTol", 1e-8)),
     gradAlphaBasedNormal_
     (
@@ -249,7 +249,7 @@ void Foam::isoAdvection::timeIntegratedFlux()
             (
                 celli,
                 alpha1In_[celli],
-                vof2IsoTol_,
+                isoFaceTol_,
                 maxIter
             );
 

src/finiteVolume/fvMatrices/solvers/isoAdvection/isoAdvection/isoAdvection.H

@@ -119,7 +119,7 @@ class isoAdvection
             label nAlphaBounds_;
 
             //- Tolerance for search of isoFace giving specified VOF value
-            scalar vof2IsoTol_;
+            scalar isoFaceTol_;
 
             //- Tolerance for marking of surface cells:
             //  Those with surfCellTol_ < alpha1 < 1 - surfCellTol_

src/finiteVolume/fvMatrices/solvers/isoAdvection/isoCutCell/isoCutCell.C

@@ -361,6 +361,23 @@ Foam::label Foam::isoCutCell::calcSubCell
         // Cell cut at least at one face
         cellStatus_ = 0;
         calcIsoFaceCentreAndArea();
+
+        // In the rare but occuring cases where a cell is only touched at a
+        // point or a line the isoFaceArea_ will have zero length and here the
+        // cell should be treated as either completely empty or full.
+        if (mag(isoFaceArea_) < 10*SMALL)
+        {
+            if (fullySubFaces_.empty())
+            {
+                // Cell fully above isosurface
+                cellStatus_ = 1;
+            }
+            else
+            {
+                // Cell fully below isosurface
+                cellStatus_ = -1;
+            }
+        }
     }
     else if (fullySubFaces_.empty())
     {

src/functionObjects/doc/functionObjects.dox

@@ -0,0 +1,97 @@
+/*---------------------------------------------------------------------------*\
+  =========                 |
+  \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
+   \\    /   O peration     |
+    \\  /    A nd           | Copyright (C) 2012-2014 OpenFOAM Foundation
+     \\/     M anipulation  | Copyright (C) 2015-2017 OpenCFD Ltd.
+-------------------------------------------------------------------------------
+License
+    This file is part of OpenFOAM.
+
+    OpenFOAM is free software: you can redistribute it and/or modify it under
+    the terms of the GNU General Public License as published by the Free
+    Software Foundation, either version 3 of the License, or (at your option)
+    any later version.
+
+    OpenFOAM is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+    details.
+
+    You should have received a copy of the GNU General Public License along with
+    OpenFOAM.  If not, see <http://www.gnu.org/licenses/>.
+
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+
+\page pagePostProcessing Post-processing
+
+\section secFunctionObjects Function objects
+
+OpenFOAM includes a collection of \ref grpFunctionObjects that offer users the
+opportunity to closely manage their computational analyses.  These objects can
+be applied to manipulate the workflow process, and provide a mechanism to
+extract predicted field and derived quantities at run-time.  Alternatively,
+the actions can be executed afterwards using the \c execFlowFunctionObjects
+utility.
+
+\linebreak
+The current range of features comprises of:
+- \ref grpFieldFunctionObjects
+- \ref grpForcesFunctionObjects
+- \ref grpGraphicsFunctionObjects
+- \ref grpLagrangianFunctionObjects
+- \ref grpSolversFunctionObjects
+- \ref grpUtilitiesFunctionObjects
+
+\linebreak
+\subsection secFieldFunctionObjectUsage Using function objects
+
+Function objects are defined by additional entries in the
+$FOAM_CASE/system/controlDict input dictionary.  Each object is listed in a
+\c functions sub-dictionary entry, e.g. the following shows the input options
+applicable to `output' -type objects:
+
+\verbatim
+functions
+{
+    myFunctionObject    // user-defined name of function object entry
+    {
+        type                functionObjectType;
+        libs                ("libMyFunctionObjectlib.so");
+        region              defaultRegion;
+        enabled             yes;
+        timeStart           0;
+        timeEnd             10;
+        evaluateControl     timeStep;
+        evaluateInterval    1;
+        writeControl        outputTime;
+        writeInterval       1;
+        ...
+    }
+}
+\endverbatim
+
+Where:
+\table
+    Property | Description                           | Required | Default value
+    type     | type of function object               | yes      |
+    libs     | libraries containing object implementation | yes |
+    region   | name of region for multi-region cases | no       |
+    enabled  | on/off switch                         | no       | yes
+    timeStart| start time                            | no       |
+    timeEnd  | end time                              | no       |
+    evaluateControl | when to evaluate: either 'writeTime' or 'timeStep'| no | timeStep
+    evaluateInterval| steps between evaluation when evaluateControl=timeStep | no | 1
+    writeControl | when to output: either 'writeTime' or 'timeStep'| no | timeStep
+    writeInterval| steps between output when writeControl=timeStep | no | 1
+\endtable
+
+The sub-dictionary name \c myFunctionObject is chosen by the user, and is
+typically used as the name of the output directory for any derived data.  The
+\c type entry defines the type of function object properties that follow.
+Since the function objects are packaged into separate libraries, the user must
+tell the code where to find the function object implementation, identified
+using the \c functionObjectLibs entry.
+
+
+\*---------------------------------------------------------------------------*/

src/functionObjects/field/Curle/Curle.C

@@ -99,7 +99,7 @@ bool Foam::functionObjects::Curle::calc()
 
         volScalarField& pDash = tpDash.ref();
         const volVectorField d(scopedName("d"), C - x0_);
-        pDash = 4*mathematical::pi/c0_*(d/magSqr(d) & dfdt);
+        pDash = (d/magSqr(d) & dfdt)/(4.0*mathematical::pi*c0_);
 
         return store(resultName_, tpDash);
     }

src/functionObjects/field/Curle/Curle.H

@@ -33,7 +33,7 @@ Description
     Curle's analogy is implemented as:
 
     \f[
-        p' = 4 \frac{\pi}{c_0}\frac{\vec d}{|\vec d|^2}\frac{d(F)}{d(t)} 
+        p' = \frac{1}{4 \pi c_0}\frac{\vec d}{|\vec d|^2}\frac{d(F)}{d(t)}
     \f]
 
 
@@ -68,8 +68,8 @@ Usage
         type         | Type name: Curle             | yes      |
         field        | Pressure field name          | no       | p
         result       | Acoustic pressure field name | no       | Curle
-        patches      | Sound generation patch names | yes      | 
-        c0           | Reference speed of sound     | yes      | 
+        patches      | Sound generation patch names | yes      |
+        c0           | Reference speed of sound     | yes      |
     \endtable
 
 

src/functionObjects/field/DESModelRegions/DESModelRegions.C

@@ -172,6 +172,8 @@ bool Foam::functionObjects::DESModelRegions::write()
         << "    writing field " << DESModelRegions.name() << nl
         << endl;
 
+    DESModelRegions.write();
+
     return true;
 }
 

src/functionObjects/field/externalCoupled/externalCoupledTemperatureMixed/externalCoupledTemperatureMixedFvPatchScalarField.C

@@ -3,7 +3,7 @@
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
     \\  /    A nd           | Copyright (C) 2013-2016 OpenFOAM Foundation
-     \\/     M anipulation  |
+     \\/     M anipulation  | Copyright (C) 2017 OpenCFD Ltd.
 -------------------------------------------------------------------------------
 License
     This file is part of OpenFOAM.
@@ -196,7 +196,7 @@ void Foam::externalCoupledTemperatureMixedFvPatchScalarField::writeData
     const scalarField Tc(patchInternalField());
 
     // Heat transfer coefficient [W/m2/K]
-    const scalarField htc(qDot/(Tp - Tc + ROOTVSMALL));
+    const scalarField htc(qDot/(Tp - Tc + 1e-3));
 
     const Field<scalar>& magSf(this->patch().magSf());
 

src/functionObjects/forces/forces/forces.H

@@ -111,8 +111,12 @@ Note
         coordinateSystem
         {
             origin  (0 0 0);
-            e3      (0 0 1);
-            e1      (1 0 0);
+            coordinateRotation
+            {
+                type    axesRotation;
+                e3      (0 0 1);
+                e1      (1 0 0);
+            }
         }
     \endverbatim
 
@@ -346,11 +350,11 @@ protected:
         //- Write binned data
         void writeBins();
 
-        //- Disallow default bitwise copy construct
-        forces(const forces&);
+        //- No copy construct
+        forces(const forces&) = delete;
 
-        //- Disallow default bitwise assignment
-        void operator=(const forces&);
+        //- No copy assignment
+        void operator=(const forces&) = delete;
 
 
 public:

src/functionObjects/utilities/thermoCoupleProbes/thermoCoupleProbes.C

@@ -128,13 +128,13 @@ void Foam::functionObjects::thermoCoupleProbes::derivatives
     scalarField Re(rhoc*Uc*d_/muc);
     scalarField Pr(Cpc*muc/kappac);
     Pr = max(ROOTVSMALL, Pr);
-    scalarField Nu(2.0 + (0.4*sqrt(Re) + 0.06*pow(Re, 2/3))*pow(Pr, 0.4));
+    scalarField Nu(2.0 + (0.4*sqrt(Re) + 0.06*pow(Re, 2.0/3.0))*pow(Pr, 0.4));
     scalarField htc(Nu*kappac/d_);
 
     const scalar sigma = physicoChemical::sigma.value();
 
     scalar area = 4*constant::mathematical::pi*sqr(0.5*d_);
-    scalar volume = (4/3)*constant::mathematical::pi*pow3(0.5*d_);
+    scalar volume = (4.0/3.0)*constant::mathematical::pi*pow3(0.5*d_);
 
     dydx =
         (epsilon_*(G/4 - sigma*pow4(y))*area + htc*(Tc - y)*area)

src/fvOptions/sources/interRegion/interRegionExplicitPorositySource/interRegionExplicitPorositySource.H

@@ -43,8 +43,13 @@ Description
 
             coordinateSystem
             {
-                e1  (0.70710678 0.70710678 0);
-                e2  (0 0 1);
+                origin      (0 0 0);
+                coordinateRotation
+                {
+                    type axesRotation;
+                    e1  (0.70710678 0.70710678 0);
+                    e2  (0 0 1);
+                }
             }
         }
     }

src/lagrangian/intermediate/submodels/Thermodynamic/SurfaceFilmModel/ThermoSurfaceFilm/ThermoSurfaceFilm.C

@@ -318,7 +318,7 @@ void Foam::ThermoSurfaceFilm<CloudType>::wetSplashInteraction
         const scalar epsilon = 0.993 - theta*(1.76 - theta*(1.56 - theta*0.49));
 
         // Update parcel velocity
-        U = -epsilon*(Un) + 5/7*(Ut);
+        U = -epsilon*(Un) + 5.0/7.0*(Ut);
 
         keepParticle = true;
         return;

src/meshTools/coordinateSystems/coordinateSystem.C

@@ -129,9 +129,21 @@ Foam::coordinateSystem::coordinateSystem
 {
     const entry* entryPtr = dict.lookupEntryPtr(typeName_(), false, false);
 
-    // non-dictionary entry is a lookup into global coordinateSystems
-    if (entryPtr && !entryPtr->isDict())
+    if (!entryPtr)
     {
+        // No 'coordinateSystem' entry
+        init(dict, obr);
+    }
+    else if (entryPtr->isDict())
+    {
+        // 'coordinateSystem' as dictionary entry - use it
+        init(entryPtr->dict(), obr);
+    }
+    else
+    {
+        // 'coordinateSystem' as non-dictionary entry
+        // - this is a lookup into global coordinateSystems
+
         keyType key(entryPtr->stream());
 
         const coordinateSystems& lst = coordinateSystems::New(obr);
@@ -152,15 +164,11 @@ Foam::coordinateSystem::coordinateSystem
                 << exit(FatalError);
         }
 
-        // copy coordinateSystem, but assign the name as the typeName
+        // Copy from coordinateSystem, but assign the name as the typeName
         // to avoid strange things in writeDict()
         operator=(lst[index]);
         name_ = typeName_();
     }
-    else
-    {
-        init(dict, obr);
-    }
 }
 
 

src/meshTools/output/foamVtkWriteCellSetFaces.C

@@ -41,7 +41,7 @@ void Foam::vtk::writeCellSetFaces
 )
 {
     outputOptions opts(outOpts);
-    opts.legacy(true);  // Legacy only, no append
+    opts.legacy(true);  // Legacy only, no xml, no append
 
     const bool legacy_(opts.legacy());
 

src/meshTools/output/foamVtkWriteFaceSet.C

@@ -41,7 +41,7 @@ void Foam::vtk::writeFaceSet
 )
 {
     outputOptions opts(outOpts);
-    opts.legacy(true);  // Legacy only, no append
+    opts.legacy(true);  // Legacy only, no xml, no append
 
     const bool legacy_(opts.legacy());
 

src/meshTools/output/foamVtkWritePointSet.C

@@ -40,7 +40,7 @@ void Foam::vtk::writePointSet
 )
 {
     outputOptions opts(outOpts);
-    opts.legacy(true);  // Legacy only, no append
+    opts.legacy(true);  // Legacy only, no xml, no append
 
     const bool legacy_(opts.legacy());
 

src/parallel/decompose/Allwmake

@@ -7,11 +7,30 @@ cd ${0%/*} || exit 1    # Run from this directory
 : ${FOAM_EXT_LIBBIN:=/usr/lib$WM_COMPILER_LIB_ARCH}  # Extra safety
 export FOAM_EXT_LIBBIN
 
+# Check for the existence of any of the files
+# On success, echoes the file found and returns 0, otherwise returns 2
+findFirstFile()
+{
+    local file
+    for file
+    do
+        if [ -f "$file" -a -r "$file" ]
+        then
+            echo "$file"
+            return 0
+        fi
+    done
+
+    return 2
+}
+
+
 # Test for metis.
 # - return 0 and export METIS_ARCH_PATH on success
 hasMetis()
 {
     local warning="==> skip metis"
+    local header label settings
 
     unset METIS_ARCH_PATH METIS_VERSION
     settings=$($WM_PROJECT_DIR/bin/foamEtcFile config.sh/metis) || {
@@ -27,28 +46,30 @@ hasMetis()
     fi
 
     # Header
-    local header=$METIS_ARCH_PATH/include/metis.h
-    if [ "${METIS_ARCH_PATH##*-}" = system ]
-    then
-        [ -f "$header" ] || header=/usr/include/metis.h
-    fi
-    [ -f "$header" ] || {
+    header=$(findFirstFile \
+        $METIS_ARCH_PATH/include/metis.h \
+        /usr/include/metis.h \
+    ) || {
         echo "$warning (no header)"
         return 2  # file not found
     }
 
     # Library
-    [ -r $FOAM_EXT_LIBBIN/libmetis.so ] || \
-    [ -r $METIS_ARCH_PATH/lib/libmetis.so ] || \
-    [ -r $METIS_ARCH_PATH/lib$WM_COMPILER_LIB_ARCH/libmetis.so ] || \
-    [ "${METIS_ARCH_PATH##*-}" = system ] || {
+    [ "${METIS_ARCH_PATH##*-}" = system ] || \
+    findFirstFile \
+        $FOAM_EXT_LIBBIN/libmetis.so \
+        $METIS_ARCH_PATH/lib/libmetis.a \
+        $METIS_ARCH_PATH/lib/libmetis.so \
+        $METIS_ARCH_PATH/lib$WM_COMPILER_LIB_ARCH/libmetis.a \
+        $METIS_ARCH_PATH/lib$WM_COMPILER_LIB_ARCH/libmetis.so \
+    > /dev/null || {
         echo "$warning (missing library)"
         return 2
     }
 
     # Ensure consistent sizes between OpenFOAM and metis header
     # Extract IDXTYPEWIDTH from metis.h: regex as per ThirdParty Allwmake
-    local label=$(sed -ne 's/^.*#define  *IDXTYPEWIDTH  *\([1-9][0-9]\).*/\1/p' $header)
+    label=$(sed -ne 's/^.*#define  *IDXTYPEWIDTH  *\([1-9][0-9]\).*/\1/p' $header)
     : ${label:=unknown}
 
     if [ "$WM_LABEL_SIZE" = "$label" ]
@@ -67,6 +88,7 @@ hasMetis()
 hasScotch()
 {
     local warning="==> skip scotch"
+    local header label settings
 
     unset SCOTCH_ARCH_PATH SCOTCH_VERSION
     settings=$($WM_PROJECT_DIR/bin/foamEtcFile config.sh/scotch) || {
@@ -82,33 +104,54 @@ hasScotch()
     fi
 
     # Header
-    local header=$SCOTCH_ARCH_PATH/include/scotch.h
-    if [ "${SCOTCH_ARCH_PATH##*-}" = system ]
-    then
-        [ -f "$header" ] || header=/usr/include/scotch.h
-    fi
-    [ -f "$header" ] || {
+    header=$(findFirstFile \
+        $SCOTCH_ARCH_PATH/include/scotch.h \
+        /usr/include/scotch/scotch.h \
+        /usr/include/scotch.h
+    ) || {
         echo "$warning (no header)"
         return 2  # file not found
     }
 
     # Library
-    [ -r $FOAM_EXT_LIBBIN/libscotch.so ] || \
-    [ -r $SCOTCH_ARCH_PATH/lib/libscotch.so ] || \
-    [ -r $SCOTCH_ARCH_PATH/lib$WM_COMPILER_LIB_ARCH/libscotch.so ] || \
-    [ "${SCOTCH_ARCH_PATH##*-}" = system ] || {
+    [ "${SCOTCH_ARCH_PATH##*-}" = system ] || \
+    findFirstFile \
+        $FOAM_EXT_LIBBIN/libscotch.so \
+        $SCOTCH_ARCH_PATH/lib/libscotch.a \
+        $SCOTCH_ARCH_PATH/lib/libscotch.so \
+        $SCOTCH_ARCH_PATH/lib$WM_COMPILER_LIB_ARCH/libscotch.a \
+        $SCOTCH_ARCH_PATH/lib$WM_COMPILER_LIB_ARCH/libscotch.so \
+    > /dev/null || {
         echo "$warning (missing library)"
         return 2
     }
 
     # Ensure consistent sizes between OpenFOAM and scotch header
     # extract 'typedef int64_t SCOTCH_Num' or equivalent
-    local label=$(sed -ne \
+    label=$(sed -ne \
         's/^.*typedef *\([^ ]*\) *SCOTCH_Num.*/\1/ip' \
         "$header")
 
     : ${label:=unknown}
 
+    # No SCOTCH_VERSION set? Try to obtain from header
+    # extract #define SCOTCH_VERSION, SCOTCH_RELEASE, SCOTCH_PATCHLEVEL
+    [ -n "$SCOTCH_VERSION" ] || \
+    SCOTCH_VERSION=$(
+        eval $(
+            sed -ne \
+            's/^ *#define *SCOTCH_\(VERSION\|RELEASE\|PATCHLEVEL\) *\([0-9][0-9]*\).*$/\1=\2/p' \
+            "$header"
+        )
+
+        set -- $VERSION $RELEASE $PATCHLEVEL
+        IFS="."
+        [ "$#" -gt 0 ] && echo "scotch-$*"
+    )
+
+    # Failsafe value
+    : ${SCOTCH_VERSION:=scotch}
+
     case "$WM_LABEL_SIZE:$label" in
     (32:int32_t | 32:int | 64:int64_t | 64:long)
         echo "Scotch (label=$label) - $SCOTCH_ARCH_PATH"
@@ -168,4 +211,5 @@ fi
 wmake $targetType decompositionMethods
 wmake $targetType decompose
 
+
 #------------------------------------------------------------------------------

src/parallel/decompose/decompositionMethods/multiLevelDecomp/multiLevelDecomp.C

@@ -3,7 +3,7 @@
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
     \\  /    A nd           | Copyright (C) 2011-2017 OpenFOAM Foundation
-     \\/     M anipulation  |
+     \\/     M anipulation  | Copyright (C) 2017 OpenCFD Ltd.
 -------------------------------------------------------------------------------
 License
     This file is part of OpenFOAM.
@@ -99,7 +99,7 @@ void Foam::multiLevelDecomp::subsetGlobalCellCells
         forAll(cCells, i)
         {
             // Get locally-compact cell index of neighbouring cell
-            label nbrCelli = oldToNew[cCells[i]];
+            const label nbrCelli = oldToNew[cCells[i]];
             if (nbrCelli == -1)
             {
                 cutConnections[allDist[cCells[i]]]++;
@@ -109,10 +109,10 @@ void Foam::multiLevelDecomp::subsetGlobalCellCells
                 // Reconvert local cell index into global one
 
                 // Get original neighbour
-                label celli = set[subCelli];
-                label oldNbrCelli = cellCells[celli][i];
+                const label celli = set[subCelli];
+                const label oldNbrCelli = cellCells[celli][i];
                 // Get processor from original neighbour
-                label proci = globalCells.whichProcID(oldNbrCelli);
+                const label proci = globalCells.whichProcID(oldNbrCelli);
                 // Convert into global compact numbering
                 cCells[newI++] = globalSubCells.toGlobal(proci, nbrCelli);
             }
@@ -127,15 +127,16 @@ void Foam::multiLevelDecomp::decompose
     const labelListList& pointPoints,
     const pointField& points,
     const scalarField& pointWeights,
-    const labelList& pointMap,      // map back to original points
-    const label levelI,
+    const labelUList& pointMap,     // map back to original points
+    const label currLevel,
+    const label leafOffset,
 
-    labelField& finalDecomp
+    labelList& finalDecomp
 )
 {
     labelList dist
     (
-        methods_[levelI].decompose
+        methods_[currLevel].decompose
         (
             pointPoints,
             points,
@@ -143,30 +144,62 @@ void Foam::multiLevelDecomp::decompose
         )
     );
 
-    forAll(pointMap, i)
+    // The next recursion level
+    const label nextLevel = currLevel+1;
+
+    // Number of domains at this current level
+    const label nCurrDomains = methods_[currLevel].nDomains();
+
+    // Calculate the domain remapping.
+    // The decompose() method delivers a distribution of [0..nDomains-1]
+    // which we map to the final location according to the decomposition
+    // leaf we are on.
+
+    labelList domainLookup(nCurrDomains);
     {
-        label orig = pointMap[i];
-        finalDecomp[orig] += dist[i];
+        label sizes = 1;  // Cumulative number of domains
+        for (label i = 0; i <= currLevel; ++i)
+        {
+            sizes *= methods_[i].nDomains();
+        }
+
+        // Distribution of domains at this level
+        sizes = this->nDomains() / sizes;
+
+        forAll(domainLookup, i)
+        {
+            domainLookup[i] = i * sizes + leafOffset;
+        }
     }
 
-    if (levelI != methods_.size()-1)
+    if (debug)
+    {
+        Info<< "Distribute at level " << currLevel
+            << " to domains" << nl
+            << flatOutput(domainLookup) << endl;
+    }
+
+    // Extract processor+local index from point-point addressing
+    forAll(pointMap, i)
+    {
+        const label orig = pointMap[i];
+        finalDecomp[orig] = domainLookup[dist[i]];
+    }
+
+    if (nextLevel < methods_.size())
     {
         // Recurse
 
         // Determine points per domain
-        label n = methods_[levelI].nDomains();
-        labelListList domainToPoints(invertOneToMany(n, dist));
-
-        // 'Make space' for new levels of decomposition
-        finalDecomp *= methods_[levelI+1].nDomains();
+        labelListList domainToPoints(invertOneToMany(nCurrDomains, dist));
 
         // Extract processor+local index from point-point addressing
         if (debug && Pstream::master())
         {
-            Pout<< "Decomposition at level " << levelI << " :" << endl;
+            Pout<< "Decomposition at level " << currLevel << " :" << endl;
         }
 
-        for (label domainI = 0; domainI < n; domainI++)
+        for (label domainI = 0; domainI < nCurrDomains; domainI++)
         {
             // Extract elements for current domain
             const labelList domainPoints(findIndices(dist, domainI));
@@ -180,7 +213,7 @@ void Foam::multiLevelDecomp::decompose
             labelList nOutsideConnections;
             subsetGlobalCellCells
             (
-                n,
+                nCurrDomains,
                 domainI,
                 dist,
 
@@ -196,12 +229,12 @@ void Foam::multiLevelDecomp::decompose
             Pstream::listCombineScatter(nOutsideConnections);
             label nPatches = 0;
             label nFaces = 0;
-            forAll(nOutsideConnections, i)
+            for (const label nConnect : nOutsideConnections)
             {
-                if (nOutsideConnections[i] > 0)
+                if (nConnect > 0)
                 {
-                    nPatches++;
-                    nFaces += nOutsideConnections[i];
+                    ++nPatches;
+                    nFaces += nConnect;
                 }
             }
 
@@ -224,7 +257,8 @@ void Foam::multiLevelDecomp::decompose
                 subPoints,
                 subWeights,
                 subPointMap,
-                levelI+1,
+                nextLevel,
+                domainLookup[domainI], // The offset for this level and leaf
 
                 finalDecomp
             );
@@ -238,24 +272,30 @@ void Foam::multiLevelDecomp::decompose
         if (debug)
         {
             // Do straight decompose of two levels
-            label nNext = methods_[levelI+1].nDomains();
-            label nTotal = n*nNext;
+            const label nNext = methods_[nextLevel].nDomains();
+            const label nTotal = nCurrDomains * nNext;
 
-            // Retrieve original level0 dictionary and modify number of domains
-            dictionary::const_iterator iter =
-                decompositionDict_.optionalSubDict(typeName + "Coeffs").begin();
-            dictionary myDict = iter().dict();
-            myDict.set("numberOfSubdomains", nTotal);
+            // Get original level0 dictionary and modify numberOfSubdomains
+            dictionary level0Dict;
+            forAllConstIter(dictionary, methodsDict_, iter)
+            {
+                if (iter().isDict())
+                {
+                    level0Dict = iter().dict();
+                    break;
+                }
+            }
+            level0Dict.set("numberOfSubdomains", nTotal);
 
             if (debug && Pstream::master())
             {
-                Pout<< "Reference decomposition with " << myDict << " :"
+                Pout<< "Reference decomposition with " << level0Dict << " :"
                     << endl;
             }
 
             autoPtr<decompositionMethod> method0 = decompositionMethod::New
             (
-                myDict
+                level0Dict
             );
             labelList dist
             (
@@ -267,12 +307,12 @@ void Foam::multiLevelDecomp::decompose
                 )
             );
 
-            for (label blockI = 0; blockI < n; blockI++)
+            for (label blockI = 0; blockI < nCurrDomains; blockI++)
             {
                 // Count the number inbetween blocks of nNext size
 
                 label nPoints = 0;
-                labelList nOutsideConnections(n, 0);
+                labelList nOutsideConnections(nCurrDomains, 0);
                 forAll(pointPoints, pointi)
                 {
                     if ((dist[pointi] / nNext) == blockI)
@@ -283,7 +323,7 @@ void Foam::multiLevelDecomp::decompose
 
                         forAll(pPoints, i)
                         {
-                            label distBlockI = dist[pPoints[i]] / nNext;
+                            const label distBlockI = dist[pPoints[i]] / nNext;
                             if (distBlockI != blockI)
                             {
                                 nOutsideConnections[distBlockI]++;
@@ -301,12 +341,12 @@ void Foam::multiLevelDecomp::decompose
                 Pstream::listCombineScatter(nOutsideConnections);
                 label nPatches = 0;
                 label nFaces = 0;
-                forAll(nOutsideConnections, i)
+                for (const label nConnect : nOutsideConnections)
                 {
-                    if (nOutsideConnections[i] > 0)
+                    if (nConnect > 0)
                     {
-                        nPatches++;
-                        nFaces += nOutsideConnections[i];
+                        ++nPatches;
+                        nFaces += nConnect;
                     }
                 }
 
@@ -330,31 +370,37 @@ void Foam::multiLevelDecomp::decompose
 Foam::multiLevelDecomp::multiLevelDecomp(const dictionary& decompositionDict)
 :
     decompositionMethod(decompositionDict),
-    methodsDict_(decompositionDict_.optionalSubDict(typeName + "Coeffs"))
+    methodsDict_(decompositionDict_.subDict(typeName + "Coeffs"))
 {
     methods_.setSize(methodsDict_.size());
-    label i = 0;
+    label nLevels = 0;
     forAllConstIter(dictionary, methodsDict_, iter)
     {
-        methods_.set(i++, decompositionMethod::New(iter().dict()));
+        // Ignore primitive entries which may be there for additional control
+        if (iter().isDict())
+        {
+            methods_.set(nLevels++, decompositionMethod::New(iter().dict()));
+        }
     }
 
-    label n = 1;
+    methods_.setSize(nLevels);
+
+    label nTot = 1;
     Info<< "decompositionMethod " << type() << " :" << endl;
     forAll(methods_, i)
     {
         Info<< "    level " << i << " decomposing with " << methods_[i].type()
             << " into " << methods_[i].nDomains() << " subdomains." << endl;
 
-        n *= methods_[i].nDomains();
+        nTot *= methods_[i].nDomains();
     }
 
-    if (n != nDomains())
+    if (nTot != nDomains())
     {
         FatalErrorInFunction
             << "Top level decomposition specifies " << nDomains()
             << " domains which is not equal to the product of"
-            << " all sub domains " << n
+            << " all sub domains " << nTot
             << exit(FatalError);
     }
 }
@@ -385,7 +431,7 @@ Foam::labelList Foam::multiLevelDecomp::decompose
     CompactListList<label> cellCells;
     calcCellCells(mesh, identity(cc.size()), cc.size(), true, cellCells);
 
-    labelField finalDecomp(cc.size(), 0);
+    labelList finalDecomp(cc.size(), 0);
     labelList cellMap(identity(cc.size()));
 
     decompose
@@ -395,6 +441,7 @@ Foam::labelList Foam::multiLevelDecomp::decompose
         cWeights,
         cellMap,      // map back to original cells
         0,
+        0,
 
         finalDecomp
     );
@@ -410,7 +457,7 @@ Foam::labelList Foam::multiLevelDecomp::decompose
     const scalarField& pointWeights
 )
 {
-    labelField finalDecomp(points.size(), 0);
+    labelList finalDecomp(points.size(), 0);
     labelList pointMap(identity(points.size()));
 
     decompose
@@ -420,6 +467,7 @@ Foam::labelList Foam::multiLevelDecomp::decompose
         pointWeights,
         pointMap,       // map back to original points
         0,
+        0,
 
         finalDecomp
     );

src/parallel/decompose/decompositionMethods/multiLevelDecomp/multiLevelDecomp.H

@@ -3,7 +3,7 @@
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
     \\  /    A nd           | Copyright (C) 2011-2015 OpenFOAM Foundation
-     \\/     M anipulation  |
+     \\/     M anipulation  | Copyright (C) 2017 OpenCFD Ltd.
 -------------------------------------------------------------------------------
 License
     This file is part of OpenFOAM.
@@ -71,21 +71,22 @@ class multiLevelDecomp
             labelList& cutConnections
         ) const;
 
-        //- Decompose level methodI without addressing
+        //- Decompose at 'currLevel' without addressing
         void decompose
         (
             const labelListList& pointPoints,
             const pointField& points,
             const scalarField& pointWeights,
-            const labelList& pointMap,  // map back to original points
-            const label levelI,
+            const labelUList& pointMap,  // map back to original points
+            const label currLevel,
+            const label leafOffset,
 
-            labelField& finalDecomp
+            labelList& finalDecomp
         );
 
         //- Disallow default bitwise copy construct and assignment
-        void operator=(const multiLevelDecomp&);
-        multiLevelDecomp(const multiLevelDecomp&);
+        void operator=(const multiLevelDecomp&) = delete;
+        multiLevelDecomp(const multiLevelDecomp&) = delete;
 
 
 public:

src/sampling/sampledSet/face/faceOnlySet.C

@@ -164,7 +164,6 @@ void Foam::faceOnlySet::calcSamples
         // Set points and cell/face labels to empty lists
         //Info<< "calcSamples : Both start_ and end_ outside domain"
         //    << endl;
-        const_cast<polyMesh&>(mesh()).moving(oldMoving);
 
         const_cast<polyMesh&>(mesh()).moving(oldMoving);
         return;

src/sampling/sampledSurface/readers/ensight/ensightSurfaceReaderTemplates.C

@@ -2,7 +2,7 @@
   =========                 |
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
-    \\  /    A nd           | Copyright (C) 2015-2016 OpenCFD Ltd.
+    \\  /    A nd           | Copyright (C) 2015-2017 OpenCFD Ltd.
      \\/     M anipulation  |
 -------------------------------------------------------------------------------
 License
@@ -75,7 +75,7 @@ Foam::tmp<Foam::Field<Type>> Foam::ensightSurfaceReader::readField
 
     std::ostringstream oss;
     label nMask = 0;
-    for (size_t chari = 0; chari < fieldFileName.size(); chari++)
+    for (size_t chari = 0; chari < fieldFileName.size(); ++chari)
     {
         if (fieldFileName[chari] == '*')
         {
@@ -130,7 +130,7 @@ Foam::tmp<Foam::Field<Type>> Foam::ensightSurfaceReader::readField
     label n = surfPtr_->size();
     forAll(values, cmptI)
     {
-        values.setSize(n);
+        values[cmptI].setCapacity(n);
     }
 
     // Read data file using schema generated while reading the surface

src/sampling/sampledSurface/sampledTriSurfaceMesh/sampledTriSurfaceMesh.C

@@ -3,7 +3,7 @@
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
     \\  /    A nd           | Copyright (C) 2011-2016 OpenFOAM Foundation
-     \\/     M anipulation  | Copyright (C) 2016-2017 OpenCFD Ltd.
+     \\/     M anipulation  | Copyright (C) 2016-2018 OpenCFD Ltd.
 -------------------------------------------------------------------------------
 License
     This file is part of OpenFOAM.
@@ -647,7 +647,7 @@ Foam::sampledTriSurfaceMesh::sampledTriSurfaceMesh
             surfaceName,
             mesh.time().constant(), // instance
             "triSurface",           // local
-            mesh,                   // registry
+            mesh.time(),            // registry
             IOobject::MUST_READ,
             IOobject::NO_WRITE,
             false
@@ -679,7 +679,7 @@ Foam::sampledTriSurfaceMesh::sampledTriSurfaceMesh
             dict.lookup("surface"),
             mesh.time().constant(), // instance
             "triSurface",           // local
-            mesh,                   // registry
+            mesh.time(),            // registry
             IOobject::MUST_READ,
             IOobject::NO_WRITE,
             false
@@ -712,7 +712,7 @@ Foam::sampledTriSurfaceMesh::sampledTriSurfaceMesh
             name,
             mesh.time().constant(), // instance
             "triSurface",           // local
-            mesh,                   // registry
+            mesh.time(),            // registry
             IOobject::NO_READ,
             IOobject::NO_WRITE,
             false

src/sampling/surface/triSurfaceMesh/discreteSurface.C

@@ -3,7 +3,7 @@
   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
    \\    /   O peration     |
     \\  /    A nd           | Copyright (C) 2011-2016 OpenFOAM Foundation
-     \\/     M anipulation  | Copyright (C) 2016 OpenCFD Ltd.
+     \\/     M anipulation  | Copyright (C) 2016-2018 OpenCFD Ltd.
 -------------------------------------------------------------------------------
 License
     This file is part of OpenFOAM.
@@ -642,7 +642,7 @@ Foam::discreteSurface::discreteSurface
             surfaceName,
             mesh.time().constant(), // instance
             "triSurface",           // local
-            mesh,                   // registry
+            mesh.time(),            // registry
             IOobject::MUST_READ,
             IOobject::NO_WRITE,
             false
@@ -680,7 +680,7 @@ Foam::discreteSurface::discreteSurface
             dict.lookup("surface"),
             mesh.time().constant(), // instance
             "triSurface",           // local
-            mesh,                   // registry
+            mesh.time(),            // registry
             IOobject::MUST_READ,
             IOobject::NO_WRITE,
             false
@@ -716,7 +716,7 @@ Foam::discreteSurface::discreteSurface
             name,
             mesh.time().constant(), // instance
             "triSurface",           // local
-            mesh,                   // registry
+            mesh.time(),            // registry
             IOobject::NO_READ,
             IOobject::NO_WRITE,
             false

src/surfMesh/triSurface/interfaces/NAS/readNAS.C

@@ -36,6 +36,7 @@ Description
 \*---------------------------------------------------------------------------*/
 
 #include "triSurface.H"
+#include "NASCore.H"
 #include "IFstream.H"
 #include "IStringStream.H"
 
@@ -47,25 +48,9 @@ namespace Foam
 // * * * * * * * * * * * * * * * Member Functions  * * * * * * * * * * * * * //
 
 // Do weird things to extract number
-static scalar parseNASCoord(const string& s)
+static inline scalar parseNASCoord(const string& s)
 {
-    size_t expSign = s.find_last_of("+-");
-
-    if (expSign != string::npos && expSign > 0 && !isspace(s[expSign-1]))
-    {
-        scalar mantissa = readScalar(IStringStream(s.substr(0, expSign))());
-        scalar exponent = readScalar(IStringStream(s.substr(expSign+1))());
-
-        if (s[expSign] == '-')
-        {
-            exponent = -exponent;
-        }
-        return mantissa*pow(10, exponent);
-    }
-    else
-    {
-        return readScalar(IStringStream(s)());
-    }
+    return fileFormats::NASCore::parseNASCoord(s);
 }
 
 
@@ -311,8 +296,8 @@ bool triSurface::readNAS(const fileName& fName)
             // GRID*      126   0 -5.55999875E+02 -5.68730474E+02
             // *         2.14897901E+02
             label index =
-                readLabel(IStringStream(readNASToken(line, 8, linei))());
-            readNASToken(line, 8, linei);
+                readLabel(IStringStream(readNASToken(line, 16, linei))());
+            readNASToken(line, 16, linei);
             scalar x = parseNASCoord(readNASToken(line, 16, linei));
             scalar y = parseNASCoord(readNASToken(line, 16, linei));
 

tutorials/incompressible/simpleFoam/motorBike/constant/transportProperties

@@ -16,6 +16,6 @@ FoamFile
 
 transportModel  Newtonian;
 
-nu              .5e-05;
+nu              1.5e-05;
 
 // ************************************************************************* //