- ensure that the string-related classes have consistently similar
matching methods. Use operator()(const std::string) as an entry
point for the match() method, which makes it easier to use for
filters and predicates. In some cases this will also permit using
a HashSet as a match predicate.
regExp
====
- the set method now returns a bool to signal that the requested
pattern was compiled.
wordRe
====
- have separate constructors with the compilation option (was previously
a default parameter). This leaves the single parameter constructor
explicit, but the two parameter version is now non-explicit, which
makes it easier to use when building lists.
- renamed compile-option from REGEX (to REGEXP) for consistency with
with the <regex.h>, <regex> header names etc.
wordRes
====
- renamed from wordReListMatcher -> wordRes. For reduced typing and
since it behaves as an entity only slightly related to its underlying
list nature.
- Provide old name as typedef and include for code transition.
- pass through some list methods into wordRes
hashedWordList
====
- hashedWordList[const word& name] now returns a -1 if the name is is
not found in the list of indices. That has been a pending change
ever since hashedWordList was generalized out of speciesTable
(Oct-2010).
- add operator()(const word& name) for easy use as a predicate
STYLE: adjust parameter names in stringListOps
- reflect if the parameter is being used as a primary matcher, or the
matcher will be derived from the parameter.
For example,
(const char* re), which first creates a regExp
versus (const regExp& matcher) which is used directly.
- less clutter and typing to use the default template parameter when
the key is 'word' anyhow.
- use EdgeMap instead of the longhand HashTable version where
appropriate
- the heuristic for matching unresolved intersections is a relatively
simple matching scheme that seems to be more robust than attempting to walk
the geometry or the cuts.
- avoid false positives for self intersection
- adjust for updates in 'develop'
- change surfaceIntersection constructor to take a dictionary of
options.
tolerance | Edge-length tolerance | scalar | 1e-3
allowEdgeHits | Edge-end cuts another edge | bool | true
avoidDuplicates | Reduce the number of duplicate points | bool | true
warnDegenerate | Number of warnings about degenerate edges | label | 0
- use InfoSwitch to disable, or via static method.
- respect the state of the argList banner when deciding to emit
initialization information. Can otherwise end up with unwanted
output rubbish on things like foamDictionary and foamListTimes.
- If the dictionary is named 'surfaces', a 'surfaces' entry is mandatory.
This is a list of wordRe, which is used to load multiple surfaces from
constant/triSurface directory.
- Other dictionaries may contain a 'surfaces' entry.
In which case the behaviour is as above (loading multiple surfaces).
The dictionary name will *NOT* be taken as a surface name itself.
- Regardless of how the surfaces are loaded or features extracted,
an additional selfIntersection test may be used.
Eg,
surfaces
{
extractionMethod extractFromSurface;
surfaces (surface1.stl surface2.nas);
// Generate features from self-intersect
selfIntersection true;
// Base output name (optiona)
output surfaces;
// Tolerance for self-intersect
planarTolerance 1e-3;
extractFromSurfaceCoeffs
{
includedAngle 120;
// Do not mark region edges
geometricTestOnly yes;
}
}
- was generally somewhat fragile. The main problem stems from the fact
that several interfaces may be attached to a boundary. No trivial
means of solving this without too much work for a feature that is only
"nice-to-have".
- Remove the unused enums() method since it delivers wholly unreliable
results. It is not guaranteed to cover the full enumeration range,
but only the listed names.
- Remove the unused strings() method.
Duplicated functionality of the words(), but was never used.
- Change access of words() method from static to object.
Better code isolation. Permits the constructor to take over
as the single point of failure for bad input.
- Add values() method
- do not expose internal (HashTable) lookup since it makes it more
difficult to enforce constness and the implementation detail should
not be exposed. However leave toc() and sortedToc() for the interface.
STYLE: relocated NamedEnum under primitives (was containers)
- internal typedef as 'value_type' for some consistency with STL conventions
except turbulence and lagrangian which will also be updated shortly.
For example in the nonNewtonianIcoFoam offsetCylinder tutorial the viscosity
model coefficients may be specified in the corresponding "<type>Coeffs"
sub-dictionary:
transportModel CrossPowerLaw;
CrossPowerLawCoeffs
{
nu0 [0 2 -1 0 0 0 0] 0.01;
nuInf [0 2 -1 0 0 0 0] 10;
m [0 0 1 0 0 0 0] 0.4;
n [0 0 0 0 0 0 0] 3;
}
BirdCarreauCoeffs
{
nu0 [0 2 -1 0 0 0 0] 1e-06;
nuInf [0 2 -1 0 0 0 0] 1e-06;
k [0 0 1 0 0 0 0] 0;
n [0 0 0 0 0 0 0] 1;
}
which allows a quick change between models, or using the simpler
transportModel CrossPowerLaw;
nu0 [0 2 -1 0 0 0 0] 0.01;
nuInf [0 2 -1 0 0 0 0] 10;
m [0 0 1 0 0 0 0] 0.4;
n [0 0 0 0 0 0 0] 3;
if quick switching between models is not required.
To support this more convenient parameter specification the inconsistent
specification of seedSampleSet in the streamLine and wallBoundedStreamLine
functionObjects had to be corrected from
// Seeding method.
seedSampleSet uniform; //cloud; //triSurfaceMeshPointSet;
uniformCoeffs
{
type uniform;
axis x; //distance;
// Note: tracks slightly offset so as not to be on a face
start (-1.001 -0.05 0.0011);
end (-1.001 -0.05 1.0011);
nPoints 20;
}
to the simpler
// Seeding method.
seedSampleSet
{
type uniform;
axis x; //distance;
// Note: tracks slightly offset so as not to be on a face
start (-1.001 -0.05 0.0011);
end (-1.001 -0.05 1.0011);
nPoints 20;
}
which also support the "<type>Coeffs" form
// Seeding method.
seedSampleSet
{
type uniform;
uniformCoeffs
{
axis x; //distance;
// Note: tracks slightly offset so as not to be on a face
start (-1.001 -0.05 0.0011);
end (-1.001 -0.05 1.0011);
nPoints 20;
}
}
The standard naming convention for heat flux is "q" and this is used for the
conductive and convective heat fluxes is OpenFOAM. The use of "Qr" for
radiative heat flux is an anomaly which causes confusion, particularly for
boundary conditions in which "Q" is used to denote power in Watts. The name of
the radiative heat flux has now been corrected to "qr" and all models, boundary
conditions and tutorials updated.
