- When OpenFOAM is under git control and a 'debian/' directory exists,
this could mean two things:
1) Additional debian control has been added to OpenFOAM
2) OpenFOAM has been imported into a debian project
For the case that OpenFOAM has been imported into a debian project,
using the git information would be highly misleading. There will be no
OpenFOAM SHA1 correspondence.
However, if additional debian control has been added to OpenFOAM the
SHA1 will be valid.
The ad hoc solution is to use an additional "openfoam.debian"
directory to flag the addition of debian controls into openfoam.
When a "debian/" directory exists without a "openfoam.debian", assume
that the OpenFOAM has been imported into debian and do not use the SHA1.
- affects ensightSurfaceReader only.
If there are no `*` characters, protect against replacement.
Otherwise it would attempt to replace a zero-length string with
a single `0`, which results in prepending the name.
STYLE: ensightSurfaceReader constructor explicit
- start of work to create a 1-to-1 face mapping across AMI patches
- faces are inserted according to the AMI addressing based on Horacio's method
- removed 'updated' flag and reworked some demand driven updates
- updated to handle 'walking' through baffles
- use bitSet instead of boolList
- moved update of meshPhi to movePoints() functions at fvPatch level
- moved scaling of areas to movePoints() functions at fvPatch level
- rehomed topology change code to own file
- added warning re: geometry construction
ACMI
- split srcMask into srcMask and srcAreaMask
- former in range 0-1, and latter has bounding or tol to (1-tol) to avoid
sigFpe's
- useful for supporting a variety of different predefined
configuration files. Bypasses the regular etc/bashrc entirely.
- minor refactoring in foamCreateModuleInclude
- related to change c3571b7357 (does not affect 1912 or older).
Remnant check for data() should have used valid() method instead.
TUT: add fluxSummary cellZoneAndDirection to angledDuct/implicit
- For some cases it can be helpful to test if additional libraries can
be properly resolved.
This can be useful in scripts to test for additional capability:
if foamHasLibrary geometricVoF
then ...
fi
But also directly from the command-line to help resolve configuration
issues:
foamHasLibrary -verbose petscFoam
Could not load "petscFoam"
libpetsc.so.3.13: cannot open shared object file: No such file or directory
- when installed in-source, use PETSC_ARCH to find additional include
directory and the correct library directory
CONFIG: bump to new hypre version
- add -hint option for have_adios2, have_hypre, have_petsc
The function object now computes the acoustic pressure at a list of user
specified locations, or from the face centres of a user-supplied surface.
When operating on an input surface, the output can be written back to the
surface or as a list of point values.
Example of function object specification:
Curle1
{
type Curle;
libs ("libfieldFunctionObjects.so");
...
patches (surface1 surface2);
c0 330;
// Input - either points or surface
input points;
observerPositions ((0 0 0)(1 0 0));
//input surface;
//surface "inputSurface.obj"
// Output - either points or surface
output points;
//output surface;
//surfaceType ensight;
}
Where the entries comprise:
Property | Description | Required | Default value
type | Type name: Curle | yes |
p | Pressure field name | no | p
patches | Sound generation patch names | yes |
c0 | Reference speed of sound | yes |
input | Input type | yes |
observerPositions | List of observer positions (x y z) | no |
surface | Input surface file name | no |
output | Output type | yes |
surfaceType | Output surface type | no |
- the earlier implementation of externally controlled lumped point
motion (see merge request !120 and OpenFOAM-v1706 release notes) was
conceived for the motion of simple structures such as buildings or
simple beams. The motion controller was simply defined in terms of
an orientation axis and divisions along that axis.
To include complex structures, multiple motion controllers are
defined in terms of support points and connectivity.
The points can have additional node Ids associated with them, which
makes it easier to map to/from FEA models.
OLD system/lumpedPointMovement specification
--------------------------------------------
//- Reference axis for the locations
axis (0 0 1);
//- Locations of the lumped points
locations (0 0.05 .. 0.5);
NEW system/lumpedPointMovement specification
--------------------------------------------
// Locations of the lumped points
points
(
(0 0 0.00)
(0 0 0.05)
...
(0 0 0.50)
);
//- Connectivity for motion controllers
controllers
{
vertical
{
pointLabels (0 1 2 3 4 5 6 7 8 9 10);
}
}
And the controller(s) must be associated with the given
pointDisplacement patch. Eg,
somePatch
{
type lumpedPointDisplacement;
value uniform (0 0 0);
controllers ( vertical ); // <-- NEW
}
TUT: adjust building motion tutorial
- use new controllor definitions
- replace building response file with executable
- add updateControl in dynamicMeshDict for slowly moving structure
- use simpler decomposeParDict in tutorials, several had old
'boilerplate' decomposeParDict
- use simpler libs () format
- update surface sampling to use dictionary format
- Removed some unnecessary dynamicMeshDicts.
- Removed the writeActiveDesignVariables execution from the Allrun
scripts, since it is no longer necessary to execute it before
adjointOptimisationFoam.
- Updated the entries in dynamicMeshDict according to efbc9fc99.
for all objective functions.
- The normalization is useful for practically all update methods dealing
with constraints (e.g. SQP, MMA). The normalization factor can be either
given explicitly or, if not given, will be the value of the objective
function in the first optimisation cycle.
- The target value is useful when using the objective as a constraint in
constrained optimisation problems (e.g. drag - dragTarget). It should
only be used with update methods that understand the value of the
constraint (e.g. SQP, MMA) but not when the objective in hand is the
only objective of the optimisation problem. In such a case, a squared
objective should be used (e.g. sqr(drag - dragTarget))
- Objective now inherits from localIOdictionary and writes the mean
objective value under the uniform folder, each time mesh.write() is
called. This is crucial for getting the correct old merit function value
if the simulation is continued from a previous state and lineSearch is
used.
- Objectives are now computed and written even if the corresponding
adjoint solver is inactive. This, among others, is also essential for
getting the correct old merit function value in case of continuation.
- Writing of the objective function (and its mean, if present) history
has now moved to updatePrimalBasedQuantities, instead of the preLoop
part of the adjoint solvers. This was decided to get the objective
values to files, even if the adjoint solver is inactive. Arguably, an
even better place to write the objective functions would be the postLoop
part of the primal solvers, however this might cause multiple writes of
the objective value for the inner iterations of lineSearch, if one is
used.
Moved part common to all derived classes (e.g. update) to the base
class to avoid code duplication. Practically, only the protected
updateDesignVariables has to be overwritten in each derived class now.
steadyOptimisation was also affected in a minor way.
- Added function returning the underlaying surface sensitivities
- Added boolean to control whether to write the underlaying sensitivity
map (defaults to false)
Encapsulates all terms that are common in both E(SI) and FI
formulations, like direct sensitivities and sensitivities due to
primal boundary conditions. Added the latter to all derived sensitivity
types, except for sensitivity maps.
Same as adjointWallVelocity but also returns the contribution
of the differentiation of the rotatingWallVelocity BC wrt the
face centres, to be added to the sensitivity derivatives.
Main reason was the insertion of a templated virtual function
returning the contribution of the differentiation of the primal
boundary condition, in the case the latter directly depends on a
a geometric quantity (e.g. rotatingWallVelocity).
Example usage:
removeParcels1
{
type removeParcels;
log yes;
resetOnWrite no;
resetOnStart no;
faceZones (cycLeft cycRight);
}
Number and mass of particles removed are written to file
to geometricVoF
sampledInterface was linked to interfaceProperties thorugh geometricVoF,
and interfaceProperties created a conflict on surfaceTension table
when linked in the reactingEuler solvers by the sampling lib
Example usage:
cloudFunctions
{
WeberNumber1
{
type WeberNumber;
}
}
This will calculate and write the Weber number field as a 'standard'
cloud field, available for post-processing alongside other lagrangian
fields in the lagrangian/<cloudName> directory.
ENH: add log FO
ENH: improve log with scale, and offset entries
BUG: ensure extrueMesh does not fail in parallel with wedge extrusion
BUG: add missing clone and mapping funcs to copiedFixedValue, fixedMultiPhaseHeatFlux
ENH: meshToMesh0::cellAddressing slight speed up for some geometries
BUG:0003495: Divide-by-zero in SHF particle break-up model
BUG:0003492: The formula in the OF is inconsistent with the Rosin-Rammler distribution theory formula
- missing minThreshold in activePressureForceBaffleVelocity
- update names of cyclics
- increase tolerance for zero-thickness baffles
- velocity field "U" instead of "UBet"
- viscosity field "nut" instead of "mut"
- replace ':' scoping with IOobject::scopedName(), which automatically
uses '_' for Windows compilations where the ':' is a meta-character
(drive separator)
- apply similar local change for the momentum function object.
*** This topic will be revisited in the future ***
- overrides normal deltaT for testing accelerated motion.
Can be useful to test mesh motions with constant/dynamicMeshDict
entries (updateControl, updateInterval) where the mesh motion is
much slower than any of the fluid physics.
see commit 87bba9ae14
Please refer to the header file documentation for complete set of details.
ENH: add new fvOptions for ABL modelling
- atmAmbientTurbSource
- atmBuoyancyTurbSource
- atmCoriolisUSource
- atmLengthScaleTurbSource
- atmPlantCanopyTurbSource
- atmPlantCanopyUSource
- atmPlantCanopyTSource
- atmNutSource
ENH: add new boundary conditions for ABL modelling
with PatchFunction1 and TimeFunction1 support
- atmAlphatkWallFunction
- atmEpsilonWallFunction
- atmNutkWallFunction
- atmNutUWallFunction
- atmNutWallFunction
- atmOmegaWallFunction
- atmTurbulentHeatFluxTemperature
STYLE: change names of nutkAtmRoughWallFunction -> atmNutkWallFunction by
ensuring the bitwise backward compatibility
ENH: add new variable-scaling force computation method to actuationDiskSource
ENH: review actuationDiskSource and radialActuationDiskSource
ENH: add new function object, ObukhovLength
ENH: add new ABL tutorials/verifications
- verificationAndValidation/atmosphericModels/atmFlatTerrain
- verification with the Leipzig field experiment
- illustration of precursor/successor field mapping
- verificationAndValidation/atmosphericModels/atmForestStability
- verification with the Sweden field experiment
- update incompressible/simpleFoam/turbineSiting
1) Implementation of the compressibleIsoInterFOam solver
2) Implementation of a new PLIC interpolation scheme.
3) New tutorials associated with the solvers
This implementation was carried out by Henning Scheufler (DLR) and Johan
Roenby (DHI), following :
\verbatim
Henning Scheufler, Johan Roenby,
Accurate and efficient surface reconstruction from volume fraction data
on general meshes, Journal of Computational Physics, 2019, doi
10.1016/j.jcp.2019.01.009
\endverbatim
The integration of the code was carried out by Andy Heather and Sergio
Ferraris from OpenCFD Ltd.
ENH: update libs of etc/caseDicts/postProcess items
ENH: ensure destructor=default
ENH: ensure constness
ENH: ensure no 'copy construct' and 'no copy assignment' exist
TUT: add examples of function objects with full set
of settings into a TUT if unavailable
TUT: update pisoFoam/RAS/cavity tutorial in terms of usage
The PIMPLE option finalOnLastPimpleIterOnly allows the call the Final
solver only in the last PIMPLE loop. The default is false which is
the present behavior.
- When compiling additional modules or user code, we need more control
for the installation locations beyond the usual FOAM_USER_LIBBIN,
FOAM_SITE_LIBBIN, FOAM_LIBBIN, and wish to have these values be
modifiable without editing files.
- provide wmake rules for handling standard defaults:
* GENERAL_RULES/module-path-user
* GENERAL_RULES/module-path-group
* GENERAL_RULES/module-path-project
which are incorporated as follows:
Make/options:
include $(GENERAL_RULES)/module-path-user
Make/files:
LIB = $(FOAM_MODULE_LIBBIN)/libMyLibrary
By default these would compile into FOAM_USER_{APPBIN,LIBBIN} but
could be adjusted at compilation time. For example,
```
wmake -module-prefix=/path/my-install-location
```
Or
```
./Allwmake -module-prefix=/path/my-install-location
./Allwmake -prefix=/path/my-install-location
```
Or
```
FOAM_MODULE_PREFIX=/path/my-install-location ./Allwmake
```
ENH: add -no-recursion option for AllwmakeParseArguments
- more descriptive naming than the -fromWmake option (still supported)
- remove wmake/scripts/wmake.{cmake,wmake}-args since the -prefix
handling and -no-recursion is now directly handled by AllwmakeParseArguments
- now list compiler versions in reverse order (newest first) similar
to how they are listed on the gcc/llvm sites. Add comments to
mention which compiler series are now considered unsupported.
ENH: add generalised log-law type ground-normal inflow boundary conditions for
wind velocity and turbulence quantities for homogeneous, two-dimensional,
dry-air, equilibrium and neutral atmospheric boundary layer (ABL) modelling
ENH: remove `zGround` entry, which is now automatically computed
ENH: add `displacement height` entry, `d`
ENH: add generalised atmBoundaryLayerInletOmega boundary condition
ENH: add a verification case for atmBoundaryLayerInlet BCs
DOC: improve atmBoundaryLayerInlet header documentation
BUG: fix value-entry behaviour in atmBoundaryLayerInlet (fixes#1578)
Without this change:
- for serial-parallel computations, if `value` entry is available in
an `atmBoundaryLayerInlet` BC, the theoretical ABL profile expressions
are not computed, and the `value` entry content is used as a profile data
- for parallel computations, if `value` entry is not available, `decomposePar`
could not be executed.
With this change:
- assuming `value` entry is always be present, the use of `value` entry for
the ABL profile specification is determined by a flag `initABL`
- the default value of the optional flag `initABL` is `true`, but whenever
`initABL=true` is executed, `initABL` is overwritten as `false` for the
subsequent runs, so that `value` entry can be safely used.
Thanks Per Jørgensen for the bug report.
BUG: ensure atmBoundaryInlet conditions are Galilean-invariant (fixes#1692)
Related references:
The ground-normal profile expressions (tag:RH):
Richards, P. J., & Hoxey, R. P. (1993).
Appropriate boundary conditions for computational wind
engineering models using the k-ε turbulence model.
In Computational Wind Engineering 1 (pp. 145-153).
DOI:10.1016/B978-0-444-81688-7.50018-8
Modifications to preserve the profiles downstream (tag:HW):
Hargreaves, D. M., & Wright, N. G. (2007).
On the use of the k–ε model in commercial CFD software
to model the neutral atmospheric boundary layer.
Journal of wind engineering and
industrial aerodynamics, 95(5), 355-369.
DOI:10.1016/j.jweia.2006.08.002
Expression generalisations to allow height
variation for turbulence quantities (tag:YGCJ):
Yang, Y., Gu, M., Chen, S., & Jin, X. (2009).
New inflow boundary conditions for modelling the neutral equilibrium
atmospheric boundary layer in computational wind engineering.
J. of Wind Engineering and Industrial Aerodynamics, 97(2), 88-95.
DOI:10.1016/j.jweia.2008.12.001
The generalised ground-normal profile expression for omega (tag:YGJ):
Yang, Y., Gu, M., & Jin, X., (2009).
New inflow boundary conditions for modelling the
neutral equilibrium atmospheric boundary layer in SST k-ω model.
In: The Seventh Asia-Pacific Conference on Wind Engineering,
November 8-12, Taipei, Taiwan.
Reproduced benchmark:
Rectangular prism shown in FIG 1 of
Hargreaves, D. M., & Wright, N. G. (2007).
On the use of the k–ε model in commercial CFD software
to model the neutral atmospheric boundary layer.
Journal of wind engineering and
industrial aerodynamics, 95(5), 355-369.
DOI:10.1016/j.jweia.2006.08.002
Benchmark data:
HW, 2007 FIG 6
TUT: update simpleFoam/turbineSiting tutorial accordingly
STDMD (i.e. Streaming Total Dynamic Mode Decomposition) is a variant of
a data-driven dimensionality reduction method.
STDMD is being used as a mathematical post-processing tool to compute
a set of dominant modes out of a given flow (or dataset) each of which is
associated with a constant frequency and decay rate, so that dynamic
features of a given flow may become interpretable, and tractable.
Among other Dynamic Mode Decomposition (DMD) variants, STDMD is presumed
to provide the general DMD method capabilities alongside economised and
feasible memory and CPU usage.
Please refer to the header file documentation for further details.
ENH: add new STDMD tutorial, pimpleFoam/laminar/cylinder2D
ENH: add Test-EigenMatrix application
The new iterative eigen decomposition functionality is
derived from:
Passalacqua et al.'s OpenQBMM (openqbmm.org/),
which is mostly derived from JAMA (math.nist.gov/javanumerics/jama/).
- generates a vtk file in an ASCII, XML format (blockTopology.vtu).
More information than the equivalent obj file since it includes
connectivity, cell shapes and cell IDs (equivalent to the block
numbers).
- new vtk::internalMeshWriter, vtk::patchMeshWriter
intermediate classes without finiteVolume dependencies.
Enables direct use with a polyMesh.
Makes vtk::internalWriter, vtk::patchWriter header/template only.
- bundled of boolean values as a vector of 3 components with
element access using x(), y() and z() member functions.
It also has some methods similar to bitSet.
- Not derived from Vector or VectorSpace since it does not share very
many vector-like characteristics.
- support construct from initializer_list, which can help simplify
code with constant coefficients.
- add default constructor for polynomialFunction and Istream reading
to support resizable lists of polynomialFunction.
A default constructed polynomialFunction is simply equivalent to
a constant zero.
- no special IO handling for Polynomial required,
it is the same as VectorSpace anyhow.
The phase systems tables for multiphase solvers create conflict
between each other as they are defined in the same namespace and using
similar class names.
Therefore a special htc function object for reactingEulerSolver was
added (reactingEulerHtcModel), located under
src/phaseSystemModels/reactingEulerFoam/functionObjects/
This commit includes the following:
- Relocate solvers/reactingEulerFoam functionObjects to
src/phaseSystemModels
- Remove links for fieldFunctionObject to multiphase libs to avoid
conflicts
- New FO for htc for reactingEulerFoam called reactingEulerHtcModel
- previously introduced `getOrDefault` as a dictionary _get_ method,
now complete the transition and use it everywhere instead of
`lookupOrDefault`. This avoids mixed usage of the two methods that
are identical in behaviour, makes for shorter names, and promotes
the distinction between "lookup" access (ie, return a token stream,
locate and return an entry) and "get" access (ie, the above with
conversion to concrete types such as scalar, label etc).
- Favour use of argList methods that are more similar to dictionary
method names with the aim of reducing the cognitive load.
* Silently deprecate two-parameter get() method in favour of the
more familiar getOrDefault.
* Silently deprecate opt() method in favour of get()
These may be verbosely deprecated in future versions.
- before (-lreactingPhaseSystem -ltwoPhaseReactingTurbulenceModels)
after (-ltwoPhaseReactingTurbulenceModels -lreactingPhaseSystem)
to fix symbol resolution issue on clang.
- similar to the behaviour of std::ignore and consistent with the
no input / no output nature of nullObject. Similarly accept a
const reference for its Istream operator.
- make most nullObject methods constexpr
- mostly wraps std::chrono so can inline much of it, which is potentially
helpful when used for inner timings.
- add elapsedTime() method for direct cast to double and for
naming similarity with wall-clock method.
Potential breaking change (minor):
- clockValue construct with a bool parameter is now simply tagged
dispatch (value is ignored) and always queries the current clock
value. This avoids needless branching.
Since this constructor form has primarily been used internally (eg,
clockTime), breakages in user code are not expected.
- have printBuildInfo output to std::ostream
- removed extraneous include "stdFoam.H"
ENH: revert to pre-processor defines for hard-coded paths (#1712)
- redundant information, but more robust at run-time without relying
on initialization order
- previously could only run from the project directory
- strip surrounding double quotes on input of path names
since they are added automatically when editing.
- previously relied on presence/absence of command-line options.
Can now explicitly disable individually
- provide shorter constructors for dealing with these types of cases.
Make construction with non-default names for "system" and "constant"
lengthier so there is no ambiguity.
multiphaseReactingTurbulenceModels and twoPhaseReactingTurbulenceModels
add models to the same table TurbulenceModel. These two libs were removed
from libreactingPhaseSystem which created the conflict.
The multiphaseReactingTurbulenceModels was added to
reactingMultiPhaseEulerFoam solver and twoPhaseReactingTurbulenceModels to
twoPhaseReactingEulerFoam solver
The FO heatTransferCoeffs for libfieldFunctionObjects needs
twoPhaseReactingTurbulenceModels.
These change avoids linking conflict from multiphaseReactingTurbulenceModels
and twoPhaseReactingTurbulenceModels being linked in the same lib.
- Provide Allwmake-mpi scripts for handling the MPI-only build segment.
- Adjust Make/options to support a FOAM_MPI_LIBBIN target location.
This will simply default to FOAM_LIBBIN/FOAM_MPI, but allows different
types of builds with out-of-tree targets.
Example,
Build OpenFOAM with default MPI settings (eg, system openmpi)
```
./Allwmake
```
Rebuild MPI-layers with different MPI.
For any given and known type
```
othermpi()
{
export WM_MPLIB=OPENMPI
export FOAM_MPI=openmpi-3.1.3
export OPAL_PREFIX=$WM_THIRD_PARTY_DIR/platforms/$WM_ARCH$WM_COMPILER/$FOAM_MPI
export MPI_ARCH_PATH="$OPAL_PREFIX"
}
```
May wish to build/rebuild ptscotch
```
(
othermpi
$WM_THIRD_PARTY_DIR/makeSCOTCH
)
```
Rebuild the mpi-dependent parts. Can also provide install location
```
for script in $(find src -name Allwmake-mpi)
do
(
other_mpi
export FOAM_MPI_LIBBIN="$HOME/tmp/install-prefix/lib/$FOAM_MPI"
)
done
```
The final leak can only be decided once all cells have been
deleted. So only exit on final invocation and give warning-only
beforehand. This avoids a lot of false positives.
The tutorial itself didn't actually produce a mesh with leakage
with the old settings. Upped the refinement level to force it
to go through the hole in the geometry.
- scripts/wmake.wmake-args partial logic for Allwmake scripts.
- handle '-quiet' as synonym for '-silent'
- Do not specify '-j' option for wrapped cmake creation to avoid
the warning:
make[1]: warning: -jN forced in submake: disabling jobserver mode.
ENH: defaulting for destructors where possible
STYLE: clear() instead of setSize(0) for plain Lists
STYLE: use bool operator instead of valid()/empty() for autoPtr tests
- enumerated values are (points | topology) which can be optionally
specified in the blockMeshDict. Default is 'topology'.
If the command-line option `blockMesh -merge-points` is specified,
this has absolute priority over any blockMeshDict entry.
STYLE: changed blockMesh "-blockTopology" option to "-write-obj"
- this is more specific to what it does. Potentially wish to add a
"-write-vtk" option in the future.
TUT: adjust tutorials to use preferred or necessary merge strategies:
* channel395DFSEM - topology
* nozzleFlow2D - points
* pipeCyclic - points
- dependency handling relocated from cmakeFunctions to wmakeFunctions
and reused for mpi-versioned builds. This allows more checks for
configuration parameters and removes hard-code build path
information.
CONFIG: remove spurious mplibHPMPI entries
CONFIG: remove ADIOS1 rules (antiquated)
- initial split of wmake-related commands into "plumbing" and
"porcelain" akin to how git handles things.
- wmakeBuildInfo (very low-level), now relocated to the wmake/scripts
and accessible for the user as "wmake -build-info".
This satisfies a long-standing desire to access build information
in a fashion similar to the api/patch information.
CONFIG: avoid git information when building with a debian/ directory
- when a 'debian/' directory exists, there is a high probability that
the '.git/' directory is from debian and not from OpenFOAM (ie,
useless here). This corresponds to an implicit '-no-git', which has
no effect when building from pristine sources.
ENH: wmakeCheckPwd becomes scripts/wmake-check-dir
- accessible for the user as "wmake -check-dir" and with 1 or 2
directory names. A wmakeCheckPwd symlink left for compatibility.
- less frequently used, but the information was previously inaccessible
under etcFiles.C.
Now exposed within the foamVersion namespace and defined under
<global.Cver> to improve configuration possibilities.
- convenient way to use alternative plugin installations
- provide separate -help-build information and reduce the noisy output
when a reader module cannot be located.
- adds into the include-quoted search list instead the general (-Idir)
search list.
* makes it less subject to ordering (since it will now generally be
searched first) and makes it less subject to how duplicate removal
is implemented. In some compilers (#1627), the last instance of
a duplicate directory would be used and not the first instance.
* removes clutter in some Make/options files
COMP: add missing linkage libraries
- improve handling of changes in ParaView/VTK or cmake parameters (#1693)
* adjust internals to support recording of an unlimited number of
configuration parameters and use file `cmp` instead of trying
to check strings ourselves.
ENH: new wmake/scripts/wmake.cmake-args handler
- additional handling of -prefix=... as CMAKE_INSTALL_PREFIX export.
- in some contexts, can use instead of AllwmakeParseArguments
- this specifically arises in the case we have used the `#eval` syntax
to generate a value.
However, since the expressions produce scalar/vector/tensor etc, the
tokenized value will *not* be introduced into the dictionary as a
label, even if it appears to be an integer value.
Eg, eval "2*5", eval "sqrt(100)" both yield `scalar(100)`, which
will not be suitable for any consumer expecting a label value.
With the `#calc` version, this problem is glossed over since it uses a
string buffer for the output (which can suppress the decimal)
and re-parses the string into tokens, which causes a label to be
recognized.
- Since we obviously already support implicit handling of ints as
floats (when reading), now also allow conversion of float
representations of integral values.
Uses the ad hoc value of 1e-4 for deciding if the value deviates too
far from being integral.
- As a side-effect, can now also support scientific notation when
specifying integers. Eg, (10 100 1e+3) for cell counts.
- simplified templating, which cleans up code and does not appear to
break any normal user coding.
ENH: unique_ptr instead of homegrown demand-driven handling.
For a given point within a given mesh, the existing `meshWave` method gives
the orthogonal distance to a patch. In meshes with very steep terrain (e.g.
a hill of 90 [deg], this might be problematic for the fields that require
the distance to the patch associated with the terrain surface.
`directionalMeshWave` is a variant of `meshWave` distance-to-patch method,
which ignores the component in the specified direction. Can be used e.g. to
calculate the distance in the z-direction only.
TUT: add example of directionalMeshWave to mesh/moveDynamicMesh/SnakeCanyon
Requirement by CENER
Implementation by Mattijs Janssens
- takes a search string and a replacement character.
The replacement character can also be a nul char ('\0'), which
simply removes the characters.
Possible uses:
* Replace reserved characters
str.replaceAny("<>:", '_');
* Remove shell meta-characters or reserved filesystem characters
str.replaceAny("*?<>{}[]:", '\0');
- construct from dimensioned/value, defaulting name from value.
Can be convenient for these type of operations:
max(.., dimensionedScalar(somedims, 0.5))
- construct from dimensioned/one, forwarding to pTraits::one.
Can be convenient for constructors:
volScalarField( ..., dimensionedScalar(somedims, one{}))
ENH: minor updates to zero/one classes.
- add global 'One' constant for symmetry with 'Zero'.
- clearer than passing a reference to a dummy variable,
or relying on move occuring within the copy constructor
(historical, but should be deprecated)
STYLE: consistent autoPtr syntax for uncollated file operations
- can help in circumstances when an zero-sized entry is written on
some processors, but the compound-type may be useful for determining
a particular code path when re-reading the files. Ensures that the
information is consistent on all processors.
STYLE: adjust separation of includes between List.H and UList.H
- bin/tools/create-mpi-config to query/write values for system openmpi.
In some cases this can be used to avoid an mpicc requirement at runtime.
- adjust openfoam session to include -test-tutorial forwarding to the
tutorials/AutoTest. This helps with writing installation tests.
- adjust foamConfigurePaths to latest version
- removal of gperftools default config, as per develop
1) Add interfaceHeatResistance model to icoReactingMultiphaseInterFoam
This model uses a spread source for the continuity Eq.
It is recommended for cases with good mesh resolution.
2) Adding iso-surface type of calculation for the interface for
the kineticGasEvaporation model
3) Add switch for option to take into account volume change
4) Add poolEvaporation tutorial
- remove MSWindows components (code and makefiles)
- use cxx, hxx extensions to reduce possible confusion with other
"list" and "vector" classes
- use C++ versions for C headers
- align wmake have_* scripts to support version query as per current
develop branch
- use config.sh/ fallbacks when the corresponding *_ARCH_PATH is empty
(eg, BOOST, CGAL, FFTW).
This aids when building outside of the regular OpenFOAM environment.
- add '[-+.~]' to the recognized qualifiers.
This allows simple readable names such as
WM_COMPILER=Clang-vendor
but also opens the FUTURE (not yet supported) possibility of
combining in additional information. For example,
WM_COMPILER=Clang~openmp
WM_COMPILER=Clang+cuda~openmp
by using '+' (add) and '~' (subtract) notation similar to what
spack uses.
CONFIG: support 'override' rules
- if present, compiler-family 'override' rules are included after
compiler-family 'general' rules have been included. This allows a
central means for including dynamically generated content to
override some values.
Some examples:
To handle different gcc versions (system compiler):
wmake/rules/...Gcc/override
```
ifneq (,$(findstring 9, $(WM_COMPILER)))
cc := gcc-9
CC := g++-9 -std=c++11
endif
```
To handle different openmp on Darwin (#1656):
wmake/rules/darwin64Clang/override
```
# Use libomp (not libgomp) unless openmp is disabled
ifeq (,$(findstring "~openmp", "$(WM_COMPILER)"))
COMP_OPENMP = -DUSE_OMP -Xpreprocessor -fopenmp
LINK_OPENMP = -lomp
else
include $(GENERAL_RULES)/no-openmp
endif
```
This treatment arguably fits into wmake/rules/darwin64Clang/general,
but it serves to illustrate a possible use case.
1) The sign of radiative flux (qr) for modes Power and HeatFlux was
corrected.
2) Relaxation factor implementation was incomplete. Now caching
valueFraction and refValue from the previous time step.
- use Clang instead of Gcc for Darwin since this is its system
compiler. The user can force use of Gcc by using Gcc92 etc.
- make etc/cshrc sed check more robust.
- replace tcsh (${%var}) syntax with ("${var}" != "")
[Fixes and ideas from Alexey Matveichev]
CONFIG: do not source the gperftools environment by default
- this is now an used feature, but can be re-enabled by advanced users
if required.
- as a side-effect of recent changes, command-line stripping of .gz
extensions on input was lost. For example,
OK: surfaceTransformPoints file.stl ...
Fail: surfaceTransformPoints file.stl.gz ...
- restore the previous behaviour of silently stripping the '.gz'
extension on input.
ENH: add triSurface::New selector entry point
- for symmetry with MeshedSurface
Now the thermal baffle can be extrapolated from a patch which is
coupled to the bottom patch of the solid region.
The user can set the T bc on the 'top' patch of the solid.
The new keyword is 'internal' and its default is true. Check new
tutorial for an example:
tutorials/heatTransfer/buoyantSimpleFoam/roomWithThickCeiling/
- reads/write shell elements
Output elements are "bunched" according to type and their set
without reordering.
- preliminary reading of solids without extraction.
Handling of *Surface specifications is not implemented
- enhancement and potential breaking change.
Nastran surface writer previously used the keyword 'scale' for
field scaling, which was applied uniformly to all output fields.
Change the meaning of 'scale' to be geometric scaling
(consistent with reading triSurfaceMesh etc).
New 'fieldScale' entry is an optional dictionary of scaling
parameters.
Example,
nastran
{
scale 1000; // [m] -> [mm]
fieldScale
{
"p.*" 0.01; // [Pa] -> [mbar]
}
}
- adjustments to internal handling to improve run-time addition of
other formats (eg, with additional user library)
For example, to write a binary STL with a '.stl' extension:
$ surfaceMeshConvert input.obj -write-format stlb output.stl
Or in a sampler,
to specify the input type without ambiguity:
surf
{
type meshedSurface;
surface sampling.inp;
fileType starcd;
scale 0.001;
...
}
STYLE: regularize naming for input/output scaling
* -read-scale (compat: -scaleIn)
* -write-scale (compat: -scaleOut)
CONFIG: change edge/surface selection name for STARCD format
- now select as "starcd" instead of "inp" to avoid naming ambiguity
with abaqus
- had a PrimitivePatch with SubField, but now use const pointField&.
There is no derivation path from a pointIOField to SubField<point>,
so a const reference makes more sense.
- face_type, point_type (similar to STL value_type, etc).
The naming avoids potential confusion with template parameters.
- rename private typedef from ParentType to MeshReference for more
consistency with polySurface etc.
- regression introduced by 431c9632f9
The triSurface dictionary constructor applies the scaling,
and thus it can be reported, but not applied in triSurfaceMesh
- previously used a Pstream::exit() invoked from the argList
destructor to handle all MPI shutdown, but this has the unfortunate
side-effect of using a fixed return value for the program exit.
Instead use the Pstream::shutdown() method in the destructor and allow
the normal program exit codes as usual. This means that the
following code now works as expected.
```
argList args(...);
if (...)
{
InfoErr<< "some error\n";
return 1;
}
```
- preferentially handle Allwmake.override, which allows packaging
tools to define alternative make scripts, or selectively disable
components.
- remove legacy handling of 'Optional' directory.
Conditionals have since migrated into scripts themselves and/or
use the wmake/scripts/have_* framework.
BUG: missed passing -debug for Allwmake scripts
- missed detection of system libraries when installed with multiarch
paths like /usr/lib/x86_64-linux-gnu
CONFIG: improve handling of group/user config files (#928)
- changed bashrc handling of FOAM_CONFIG_NOUSER to use
FOAM_CONFIG_MODE instead. Propagate into foamEtcFile to make this
a stickier control.
This change allows better control, but also enables cluster
installations to define their own value within the OpenFOAM prefs.sh
file to prevent users accidentally mis-configuring things if
necessary.
- remove undocumented handling of an (a)ll mode in foamEtcFile to
avoid potential pitfalls.
- add support for FOAM_CONFIG_ETC handling.
This allows injection of an extra search layer when finding
project etc files
ENH: improvements to foamConfigurePaths (#928)
- handle FOAM_CONFIG_ETC implicitly, or explicitly with the new
-etc option.
STYLE: more explicit wording in foamConfigurePaths usage (#1602)
- document that an absolute path (eg, -scotch-path) overrides/ignores
the equivalent ThirdParty setting (eg, -scotch)
- longer options -system-compiler and -third-compiler for -system
and -third, respectively. Clearer as to their purpose.
- adjust the location sanity check to look for META-INFO directory.
- '-c' option (as per shell), '-Dkey[=value]' option to provide
preferences via the command-line. For example,
etc/openfoam -DWM_COMPILER=Clang -int64 ./Allwmake -j -s -l
These can also be combined with other options. Eg,
etc/openfoam -DWM_COMPILER=Clang \
-c 'wmake -show-path-cxx -show-cxxflags'
- relocated from bin/tools/ => etc/ for easier access
- bin/tools/openfoam.in : for autoconfig-style installation
- Auto-detect if the shell script was executed with openfoam and
interpret accordingly.
Simple example,
--------------
#!/usr/bin/openfoam
cd "${0%/*}" || exit # Run -*-sh-*- from this dir
blockMesh
simpleFoam
--------------
Note it is NOT currently possible to provide any other parameters
this way. Eg,
`#!/usr/bin/openfoam -sp` (NOT)
This will either fail to run, or result in infinite recursion.
- base level surface container is now a meshedSurface instead of
a triSurface. This avoid automatic triangulation of surfaces
when they are read, and simplifies the internals.
- sampling types:
* "meshedSurface" (compat: "sampledTriSurfaceMesh")
* "meshedSurfaceNormal" (compat: "sampledTriSurfaceMeshNormal")
- uses MeshedSurface instead of triSurface to prevent automatic
triangulation.
- supports '-patches' and '-excludePatches' controls as per foamToVTK.
For example,
surfaceSplitByPatch -patches '( ".*rider.*" )' motorBike.obj
ENH: use MeshedSurface for surfaceSubset
- removed swapZones method (unused, potentially fragile)
- add subsetMesh by name
BUG: incorrect zone assignment in MeshedSurface::subsetMesh
- used the new (zero-sized) zone when determining the old zone ending
instead of the original zone bounds.
- refactor logic from triSurfaceMesh for triSurface, MeshedSurface,
UnsortedMeshedSurface.
Makes it easier to locate and use surface files without the
triSurfaceMesh (meshTools) infrastructure.
STYLE: remove unused sampledTriSurfaceMesh constructors
Often we want to copy a field and replace boundary conditions, e.g. change type
to calculated for some patches. This has typically been achieved by creating a
word list of new patch types which are then fed through to the fvPatchField::New
factory method. This is OK for types that require no additional input (usually
from dictionary) but leaves other more complex types partially
constructed/usable.
The new constructor clones all BCs except those with indices specified, for
which the fvPatchField::New method is called for the supplied patch field type.
- avoid face copying.
Maintain separate offsets/list for non tri/quad face decomposition,
which eliminates copying for tri/quad types that represent the bulk
of geometries
- report inappropriate use of PLOAD2 for higher-ranks only once per
field instead of per face. For this case, write its magnitude
instead of 0.
- perform field output scaling prior to calling the write face
function. This will make it easier to handle different per-field
scaling in the future (#1612)
BUG: nastran quad written as "CTRIA3" instead of "CQUAD4"
- missed detection of system libraries when installed with multiarch
paths like /usr/lib/x86_64-linux-gnu
CONFIG: improve handling of group/user config files (#928)
- changed bashrc handling of FOAM_CONFIG_NOUSER to use
FOAM_CONFIG_MODE instead. Propagate into foamEtcFile to make this
a stickier control.
This change allows better control, but also enables cluster
installations to define their own value within the OpenFOAM prefs.sh
file to prevent users accidentally mis-configuring things if
necessary.
- remove undocumented handling of an (a)ll mode in foamEtcFile to
avoid potential pitfalls.
- add support for FOAM_CONFIG_ETC handling.
This allows injection of an extra search layer when finding
project etc files
ENH: improvements to foamConfigurePaths (#928)
- handle FOAM_CONFIG_ETC implicitly, or explicitly with the new
-etc option.
STYLE: more explicit wording in foamConfigurePaths usage (#1602)
- document that an absolute path (eg, -scotch-path) overrides/ignores
the equivalent ThirdParty setting (eg, -scotch)
- longer options -system-compiler and -third-compiler for -system
and -third, respectively. Clearer as to their purpose.
- adjust the location sanity check to look for META-INFO directory.
- string expansions have supported "${var:-default}" syntax for
several versions, but this did not apply plain dictionary expansions.
Eg, the following did not parse
massFlow ${entry1:-100};
ENH: remove content and length restriction on '${..}' quoted variables
- allows this type of content:
velocity2 ${velocity1:- ( 0 -100 10) };
- accept empty parameter strings for entries. This allows the
following expansion to work as expected:
hex (n1 n2..) ${inletBlock:-} (10 10 10) simpleGrading (1 1 1)
ie, optionally define the cellZone name for a given block
ENH: add single parameter dictionary writeEntry method.
- the dictionary knows its own name (dictName), which can be used
when writing content
Style changes:
- use std algorithm for some stringOps internals
- pass SubStrings iterators by const reference
ENH: special nullptr handling for ISstream getLine
- pass through to istream::ignore to support read and discard
1) Adding interfaceHeight FO
2) Adding interfaceHeatResistance mass transfer model to
interCondensatingEvaporatingFoam with spread source approach
3) Reworking framework for icoReactingMultiphaseInterFoam
* Support default values for format/compress enum lookups.
- Avoids situations where the preferred default format is not ASCII.
For example, with dictionary input:
format binar;
The typing mistake would previously have caused formatEnum to
default to ASCII. We can now properly control its behaviour.
IOstream::formatEnum
(
dict.get<word>("format"), IOstream::BINARY
);
Allowing us to switch ascii/binary, using BINARY by default even in
the case of spelling mistakes. The mistakes are flagged, but the
return value can be non-ASCII.
* The format/compression lookup behave as pass-through if the lookup
string is empty.
- Allows the following to work without complaint
IOstream::formatEnum
(
dict.getOrDefault("format", word::null), IOstream::BINARY
);
- Or use constructor-like failsafe method
IOstream::formatEnum("format", dict, IOstream::BINARY);
- Apply the same behaviour with setting stream format/compression
from a word.
is.format("binar");
will emit a warning, but leave the stream format UNCHANGED
* Rationalize versionNumber construction
- constexpr constructors where possible.
Default construct is the "currentVersion"
- Construct from token to shift the burden to versionNumber.
Support token as argument to version().
Now:
is.version(headerDict.get<token>("version"));
or failsafe constructor method
is.version
(
IOstreamOption::versionNumber("version", headerDict)
);
Before (controlled input):
is.version
(
IOstreamOption::versionNumber
(
headerDict.get<float>("version")
)
);
Old, uncontrolled input - has been removed:
is.version(headerDict.lookup("version"));
* improve consistency, default behaviour for IOstreamOption construct
- constexpr constructors where possible
- add copy construct with change of format.
- construct IOstreamOption from streamFormat is now non-explicit.
This is a commonly expected result with no ill-effects
- align Switch more with Enum.
Now have find(), found() static methods.
Constructors with failsafe option.
The find() method makes for clearer coding:
OLD
Switch sw(some_string, true); // NB: true = allowBad
if (sw.valid()) ...
NOW
Switch sw = Switch::find(some_string);
if (sw.good()) ...
or
if (Switch::found(some_string)) ...
- improve construct from dictionary to handle all valid token types.
Previously just read in a word.
- Remove asText() method - replaced by c_str() and str() several
versions ago.
- renamed 'core/' -> 'base/' to avoid gitignore masking when re-adding
files
- rename 'nas/' to 'nastran/' for more clarity
- relocated OBJstream from surfMesh to fileFormats
STYLE: remove unused parseNASCoord. Was deprecated 2017-09
- `tensor` and `tensor2D` returns complex eigenvalues/vectors
- `symmTensor` and `symmTensor2D` returns real eigenvalues/vectors
- adds new test routines for eigendecompositions
- improves numerical stability by:
- using new robust algorithms,
- reordering the conditional branches in root-type selection
- In the course of time, global funcs/opers of Tensor types expanded
leaving funcs/opers unordered.
- Therefore, by following the order designated in Matrix class, the order
of global funcs and global opers are reordered:
- oper+ oper- oper* oper/ inner-product double-inner-product outer-product
- ensures each Tensor-container operates for the following base types:
- floatScalar
- doubleScalar
- complex
- adds/improves test applications for each container and base type:
- constructors
- member functions
- global functions
- global operators
- misc:
- silently removes `invariantIII()` for `tensor2D` and `symmTensor2D`
since the 3rd invariant does not exist for 2x2 matrices
- fixes `invariantII()` algorithm for `tensor2D` and `symmTensor2D`
- adds `Cmpt` multiplication to `Vector2D` and `Vector`
- adds missing access funcs for symmetric containers
- improves func/header documentations
- includes restructuring and simplification of low-level ensight part
handling and refactor of backends to improve code reuse.
foamToEnsight
-------------
* new cellZone support.
This was previously only possible via a separate foamToEnsightParts
utility that was not parallelized.
* support for point fields.
* `-nearCellValue` option (as per foamToVTK)
* data indexing now uses values from the time index.
This is consistent with the ensightWrite function object and
can help with restarts.
* existing ensight directories are removed, unless the -no-overwrite
option is supplied
foamToEnsightParts
------------------
* now redundant and removed.
ensightOutputSurface (new class)
--------------------------------
* a lightweight wrapper for point/face references that is tailored
for the ensightSurfaceWriter. It uses compact face/point information
and is serial only, since this is the format requirements from the
surfaceWriter class.
ensightMesh (revised class)
---------------------------
* now only holds a polyMesh reference, which removes its dependency
on finiteVolume and allows it to be relocated under fileFormats
instead of conversion.
Removed classes: ensightParts, ensighPartFaces, ensightPartCells
- these were used by foamToEnsightParts, but not needed anymore.
- '-c' option (as per shell), '-Dkey[=value]' option to provide
preferences via the command-line. For example,
etc/openfoam -DWM_COMPILER=Clang -int64 ./Allwmake -j -s -l
These can also be combined with other options. Eg,
etc/openfoam -DWM_COMPILER=Clang \
-c 'wmake -show-path-cxx -show-cxxflags'
- relocated from bin/tools/ => etc/ for easier access
- bin/tools/openfoam.in : for autoconfig-style installation
- Auto-detect if the shell script was executed with openfoam and
interpret accordingly.
Simple example,
--------------
#!/usr/bin/openfoam
cd "${0%/*}" || exit # Run -*-sh-*- from this dir
blockMesh
simpleFoam
--------------
Note it is NOT currently possible to provide any other parameters
this way. Eg,
`#!/usr/bin/openfoam -sp` (NOT)
This will either fail to run, or result in infinite recursion.
- simplifies code, covers most cases.
Can use wmake -show-api or wmakeBuildInfo to query the make rules.
STYLE: Allwmake script adjustments
- use bin/foamEtcFile instead of relying on PATH.
The make environment may not have the OpenFOAM bin/ in it.
- simpler shell syntax
Issues:
- neighbouring processors use different ray since always from
owner cc to nbr cc
- growing cellZones did not correctly unmark intersections
- stand-alone baffles now always removed (if inside 'grow' region,
i.e. within 1 cell of cellZone)
- the foamConfigurePaths script is quite simplistic and aggressive in
what it changes. This was particularly evident when using it to
change gcc/clang versions.
Restructured the corresponding compiler settings to define default
versions (eg, "default_gcc_version") that limits the scope of
changes performed by foamConfigurePaths and makes it easier to
understand if changing manually.
- provides an indirect access to a sub-section of a list that is
somewhat less efficient than a Foam::SubList, but supports the
following:
* adjustment of its addressing range after construction
* recovery of the original, underlying list at any time
This can be more convenient for some coding cases.
For example,
template<class Addr>
void renumberFaces(IndirectListBase<face, Addr>& faces, ...);
which can be called for
* Specific faces:
UIndirectList<face>(mesh.faces(), facesToChange)
* A sub-range of faces:
IndirectSubList<face>(mesh.faces(), pp.range())
* All faces:
IndirectSubList<face>(mesh.faces())
CONFIG: added IndirectListsFwd.H with some common forwarding
- make read construct from Istream explicit
BUG: sph(const SymmTensor2D<Cmpt>&)
- had incorrect constant, but the 2D routines still need more attention
(#1575)
- the vtkCellArray internal structure was still largely oriented on
the VTK legacy format, but has now been revised.
https://gitlab.kitware.com/vtk/vtk/merge_requests/5682
The `VTK_CELL_ARRAY_V2` define from vtkCellArray.h indicates
that the newer version is being used.
* In VTK-8.2.0 and older, sizes are interwoven (prefixed) in the
connectivity.
Connectivity: [n1, verts..., n2, verts... ]
When using these in vtkUnstructuredGrid, also needed a secondary
list of offsets for each of the starting locations.
* The update version now resembles a CompactListList. For example
Connectivity: [verts..., verts... ]
Offsets: [0, n1, n1+n2, n1+n2+n3... ]
The offsets are properly handled within vtkCellArray, and dropped as
an additional input for vtkUnstructuredGrid.
- make stream constructors explicit
- remove "using std::ifstream", "using std::iofstream" statements
for a cleaner namespace.
* copy/move assignments for ITstream
* IStringStream: default construct and construct from std::string
instead of Foam::string
- reduce some overhead in masterOFstream
- simplify Pstream handling of string variants (#1525)
- this submodule (https://develop.openfoam.com/modules/visualization)
consolidates VTK-related visualization routines:
* catalyst
* paraview-plugins
* runTimePostProcessing
A benefit of this is make it easier to mix and match
different combinations of VTK/ParaView versions and capabilities
(Eg, MESA, MPI etc).
The catalyst submodule is now obsolete
OpenQBMM is a suite of solvers to simulate polydisperse multiphase flows using
Quadrature-Based Moment Methods (QBMM). For more information, please see
https://www.openqbmm.org/
Main author: Alberto Passalacqua
- avoid stealing autoPtr in interpolationTable copy operations
- improve local memory requirements of readers
- make OpenFOAM table reader default constructible
- more code alignment between csvTableReader and Function1::CSV
(fix#1498 for csvTableReader as well)
- remove (unused) Istream constructors, prune some unused methods,
rationalize write() vs writeDict().
Deprecate inconsistent construction order.
- handle empty names for ".ftr" surface patches (for plain triSurface
format) with double-quoted strings for more reliable streaming.
Written on a single line.
This is _backward_ compatible, but if users have been parsing these
files manually, they will need to adjust their code.
Previously:
```
(
frt-fairing:001%1
empty
windshield:002%2
empty
...
)
```
Updated (with example handling of empty name):
```
(
frt-fairing:001%1 empty
windshield:002%2 ""
...
)
```
- was in surfMesh/triSurface/patches/
now in OpenFOAM/meshes/Identifiers/surface/
This places the code closer to other identifier classes,
which aids in maintaining consistency
- previously the store() method just set the ownedByRegistry flag.
Now ensure that it is indeed registered first.
- support register/store of tmp<> items.
The tmp parameter is not cleared, but changed from PTR to CREF
to allow further use.
The implicit registration allows code simplification using the
GeometricField::New factory method, for example.
Old Code
========
volScalarField* ptr = new volScalarField
(
IOobject
(
fieldName,
mesh.time().timeName(),
mesh,
IOobject::NO_READ,
IOobject::NO_WRITE,
true // Register
),
mesh,
dimless,
zeroGradientFvPatchField<scalar>::typeName
);
ptr->store();
New Code
========
auto tptr = volScalarField::New
(
fieldName,
mesh,
dimless,
zeroGradientFvPatchField<scalar>::typeName
);
regIOobject::store(tptr);
or even
regIOobject::store
(
volScalarField::New
(
fieldName,
mesh,
dimless,
zeroGradientFvPatchField<scalar>::typeName
)
);
The collated container ('decomposedBlockData') is always binary
but the 'payload' might be ascii so use that header information
instead of the decomposeBlockData header.
- kEpsilonPhitF is a kEpsilon-based model which originated
from (Durbin, 1995)’s v2-f methodology. However, the majority of
v2-f model variants proved to be numerically stiff for segregated
solution algorithms due to the coupled formulations of v2 and f fields,
particularly on wall boundaries.
The v2-f variant (i.e. OpenFOAM’s v2f model) due to
(Lien and Kalitzin, 2001) reformulated the original v2-f model to enable
segregated computations; however, a number of shortcomings regarding
the model fidelity were reported in the literature.
To overcome the shortcomings of the v2-f methodology, the v2-f approach
was re-evaluated by (Laurence et al., 2005) by transforming v2 scale into
its equivalent non-dimensional form, i.e. phit, to reduce the numerical
stiffness.
This variant, i.e. kEpsilonPhitF, is believed to provide numerical
robustness, and insensitivity to grid anomalies while retaining the
theoretical model fidelity of the original v2-f model.
Accordingly the v2f RANS model is deprecated in favour of the variant
kEpsilonPhitF model.
When a contact resistance is used the T field on each coupled
patch is different due to the thermal resistance. Thus, instead
of solving for a unique Tw at the wall, we solve for Tw1 at one side
then, the Tnbr internal becomes Tw2, which is the T of the nbr patch.
OpenFOAM is a free, open source CFD software [released and developed by OpenCFD Ltd since 2004](http://www.openfoam.com/history/).
It has a large user base across most areas of engineering and science, from both commercial and academic organisations.
OpenFOAM has an extensive range of features to solve anything from complex fluid flows involving chemical reactions, turbulence and heat transfer, to acoustics, solid mechanics and electromagnetics.
@ -11,7 +11,7 @@ individual and group contributors, integrations
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
