- freeCommmunicatorComponents needs an additional bounds check.
When MPI is initialized outside of OpenFOAM, there are no
UPstream communicator equivalents
- was using UPstream::procIDs(), which returns the sub-ranks with
respect to the parent communicator. This is normally just an
identity list (single-world) but with multi-world the indexing
is incorrect. Use UPstream::allProcs() instead.
- the output write scaling should be applied *after* undoing the
effects of the specified rotation centre. Fixes#2566
ENH: update option names for transformPoints and surfaceTransformPoints
- prefer '-auto-centre' and '-centre', but also accept the previous
options '-auto-origin' and '-origin' as aliases.
Changing to '-centre' avoids possible confusion with
coordinate system origin().
- add overflow() method to the SHA1 streambuf. Previously could rely
on xsputn for adding to sha1 content, but streams now check pptr()
first to test for the buffering range and thus overflow() is needed.
- when used for example with wallShearStress, the stress field is
initially created as incompressible but later updated with the
correct compressible/incompressible dimensions.
If this field is sampled as a surface and stored on the registry
the dimensions should be reset() and not '=' assigned, since that
causes a dimension check which will obviously fail.
- occurs with newer gcc on ubuntu impish (gcc-11.2.0), but may perhaps
actually be related to `-flto=auto` or to the destruction order of
the static variables (race condition?).
Leaving the compat table around for automatic cleanup does not
impact on other lookups (which are nullptr checked anyhow).
- partial revert for 13740de427 (#2158)
MS-MPI does not currently have a MPI_Comm_create_group(),
so keep using MPI_Comm_create() there.
Only affects multi-world simulations.
CONFIG: retain dummy version of libPstream.dll
- retain as libPstream.dll-dummy so that it is available for
manual replacement of the regular libPstream.dll (#2290)
Keep extra copy of libPstream.dll as libPstream.dll-msmpi
(for example) for manual replacement.
- this is now consistent with what the internal
"get(Vol|Surface|Point)Field" methods deliver
(ie, zero-gradient for volume, calculated otherwise).
Still some slight inconsistencies with what the internal
"new(Vol|Surface|Point)Field" methods deliver however.
There they are always "calculated"
Enables particles to interact with mesh faces (decsribed using faceZones).
faceInteraction1
{
type faceInteraction;
faceZones
(
(blockageFaces stick)
// (blockageFaces escape)
// (blockageFaces rebound) // not applicable for this test case (!)
);
dMin 0;
dMax 1;
}
The faceZones entry is a list of (faceZoneName interactionType), where
interaction type is either stick, escape or rebound.
The parcel initial velocity can now be set using the new `velocityType`
entry, taking one of the following options:
- fixedValue : (default) same as earlier versions, requires U0
- patchValue : velocity set to seed patch face value
- zeroGradient : velocity set to seed patch face adjacent cell value
Example usage:
model1
{
type patchInjection;
massTotal 1;
SOI 0;
parcelBasisType mass;
patch cylinder;
duration 10;
parcelsPerSecond 100;
velocityType patchValue;
//velocityType zeroGradient;
//U0 (-10 0 0);
flowRateProfile constant 1;
sizeDistribution
{
type normal;
normalDistribution
{
expectation 1e-3;
variance 1e-4;
minValue 1e-5;
maxValue 2e-3;
}
}
}
See the new $FOAM_TUTORIALS/lagrangian/kinematicParcelFoam/spinningDisk tutorial
The turbulentTemperatureCoupledBaffleMixed boundary condition
has been superseded by the turbulentTemperatureRadCoupledMixed condition
TUT: injectorPipe: remove an unused entry
TUT: waveMakerFlap: remove uncompressed entry
ENH: Copying alphatLiquid value to alphatVapour for boiling regimes.
When using correlations for boiling regimes the phases next to the
wall are not relevant to these. Therefore the alphat is copied
accordingly from the alphat for liquid.
Only in the sub-cooling RPI model the partition of heat flux
between vapour and liquid is considered.
Calculates propeller performance and wake field properties.
Controlled by executeControl:
- Propeller performance
- Thrust coefficient, Kt
- Torque coefficient, 10*Kq
- Advance coefficient, J
- Open water efficiency, etaO
- Written to postProcessing/<name>/<time>/propellerPerformance.dat
Controlled by writeControl:
- Wake field text file
- Wake: 1 - UzMean/URef
- Velocity in cylindrical coordinates at xyz locations
- Written to postProcessing/<name>/<time>/wake.dat
- Axial wake field text file
- 1 - Uz/URef at r/R and angle
- Written to postProcessing/<name>/<time>/axialWake.dat
- Velocity surface
- Written to postProcessing/<name>/surfaces/time>/disk.<fileType>
Usage
Example of function object specification:
\verbatim
propellerInfo1
{
type propellerInfo;
libs (forces);
writeControl writeTime;
patches ("propeller.*");
URef 5; // Function1 type; 'constant' form shown here
rho rhoInf; // incompressible
rhoInf 1.2;
// Optionally write propeller performance data
writePropellerPerformance yes;
// Propeller data:
// Radius
radius 0.1;
rotationMode specified; // specified | MRF
// rotationMode = specified:
origin (0 -0.1 0);
n 25.15;
axis (0 1 0);
// Optional reference direction for angle (alpha) = 0
alphaAxis (1 0 0);
//// rotationMode = mrf
//// MRF MRFZoneName;
//// (origin, n and axis retrieved from MRF model)
// Optionally write wake text files
// Note: controlled by writeControl
writeWakeFields yes;
// Sample plane (disk) properties
// Note: controlled by writeControl
sampleDisk
{
surfaceWriter vtk;
r1 0.05;
r2 0.2;
nTheta 36;
nRadial 10;
interpolationScheme cellPoint;
errorOnPointNotFound false;
}
}
\endverbatim
Where the entries comprise:
\table
Property | Description | Required | Deflt value
type | Type name: propellerInfo | yes |
log | Write to standard output | no | no
patches | Patches included in the forces calculation | yes |
p | Pressure field name | no | p
U | Velocity field name | no | U
rho | Density field name | no | rho
URef | Reference velocity | yes |
rotationMode | Rotation mode (see below) | yes |
origin | Sample disk centre | no* |
n | Revolutions per second | no* |
axis | Propeller axis | no* |
alphaAxis | Axis that defines alpha=0 dir | no |
MRF | Name of MRF zone | no* |
originOffset | Origin offset for MRF mode | no | (0 0 0)
writePropellerPerformance| Write propeller performance text file | yes |
writeWakeFields | Write wake field text files | yes |
surfaceWriter | Sample disk surface writer | no* |
r1 | Sample disk inner radius | no | 0
r2 | Sample disk outer radius | no* |
nTheta | Divisions in theta direction | no* |
nRadial | Divisions in radial direction | no* |
interpolationScheme | Sampling interpolation scheme | no* | cell
\endtable
Note
- URef is a scalar Function1 type, i.e. supports constant, table, lookup values
- rotationMode is used to set the origin, axis and revolutions per second
- if set to 'specified' all 3 entries are required
- note: origin is the sample disk origin
- if set to 'MRF' only the MRF entry is required
- to move the sample disk away from the MRF origin, use the originOffset
- if writePropellerPerformance is set to on|true:
- propellerPerformance text file will be written
- if writeWakeFields is set to on|true:
- wake and axialWake text files will be written
- if the surfaceWriter entry is set, the sample disk surface will be written
- extents set according to the r1 and r2 entries
- discretised according to the nTheta and nRadial entries
- provides a simple means of defining/modifying fields. For example,
```
<name1>
{
type exprField;
libs (fieldFunctionObjects);
field pTotal;
expression "p + 0.5*(rho*magSqr(U))";
dimensions [ Pa ];
}
```
It is is also possible to modify an existing field.
For example, to modify the previous one.
```
<name2>
{
type exprField;
libs (fieldFunctionObjects);
field pTotal;
action modify;
// Static pressure only in these regions
fieldMask
#{
(mag(pos()) < 0.05) && (pos().y() > 0)
|| cellZone(inlet)
#};
expression "p";
}
```
To use as a simple post-process calculator, simply avoid storing the
result and only generate on write:
```
<name2>
{
store false;
executionControl none;
writeControl writeTime;
...
}
```
- literal lookups only for expression strings
- code reduction for setExprFields.
- changed keyword "condition" to "fieldMask" (option -field-mask).
This is a better description of its purpose and avoids possible
naming ambiguities with functionObject triggers (for example)
if we apply similar syntax elsewhere.
BUG: erroneous check in volumeExpr::parseDriver::isResultType()
- not triggered since this method is not used anywhere
(may remove in future version)
Based on:
Cao, L., Sun, F., Chen, T., Tang, Y., & Liao, D. (2018).
Quantitative prediction of oxide inclusion defects inside
the casting and on the walls during cast-filling processes.
International Journal of Heat and Mass Transfer, 119, 614-623.
DOI:10.1016/j.ijheatmasstransfer.2017.11.127
Co-authored-by: Kutalmis Bercin <kutalmis.bercin@esi-group.com>
- this refines commit c233961d45, which added prefix scoping.
Default is now off (v2106 behaviour).
The 'useNamePrefix' keyword can be specified on a per function basis
or at the top-level of "functions".
```
functions
{
errors warn;
useNamePrefix true;
func1
{
type ...;
useNamePrefix false;
}
func2
{
type ...;
// Uses current default for useNamePrefix
}
}
```
- at the moment there is no significant difference since FieldBase is
essentially just a refCount anyhow, but changing the inheritance
ensures that reinterpret casting from SubField -> Field will
continue to work if FieldBase is changed in the future.
A Helmholtz-like filter is applied to the original field of sensitivity
derivatives. The corresponding PDE is solved on the sensitivity patches,
using the finite area infrastructure. A smoothing radius is needed,
which is computed based on the average 'length' of the boundary faces,
if not provided by the user explicitly.
If an faMesh is provided, it will be used; otherwise it will be created
on the fly based on either an faMeshDefinition dictionary in system or
one constructed internally based on the sensitivity patches.
Surface gradient scheme with under-/over-relaxed
full or limited explicit non-orthogonal correction.
A minimal example by using system/fvSchemes:
snGradSchemes
{
snGrad(<term>) relaxed;
}
and by using system/fvSolution:
relaxationFactors
{
fields
{
snGrad(<term>) <relaxation factor>;
}
}
A second-order gradient scheme using face-interpolation,
Gauss' theorem and iterative skew correction.
Minimal example by using system/fvSchemes:
gradSchemes
{
grad(<term>) iterativeGauss <interpolation scheme> <number of iters>;
}
- fix overly aggressive match in the API value
- allow `INTELMPI*` generic value, this can be used to specify something
like INTELMPI_custom and populate the corresponding wmake rule
manually
STYLE: mention FOAM_BUILDROOT in wmake -help-full output
STYLE: adjust openfoam shell session welcome information
- adjust internal variable names to reduce collision potential
- improve handling of openfoam -etc=...
Description
Writes point data in glTF v2 format
Two files are generated:
- filename.bin : a binary file containing all scene entities
- filename.gltf : a JSON file that ties fields to the binary data
The output can contain both geometry and fields, with additional support
for colours using a user-supplied colour map, and animation of particle
tracks.
Controls are provided via the optional formatOptions dictionary.
For non-particle track data:
\verbatim
formatOptions
{
// Apply colours flag (yes | no ) [optional]
colours yes;
// List of options per field
fieldInfo
{
p
{
// Colour map [optional]
colourMap <colourMap>;
// Colour map minimum and maximum limits [optional]
// Uses field min and max if not specified
min 0;
max 1;
// Alpha channel [optional] (uniform | field)
alpha uniform;
alphaValue 0.5;
//alpha field;
//alphaField T;
//normalise yes;
}
}
}
\verbatim
For particle tracks:
\verbatim
formatOptions
{
// Apply colours flag (yes | no) [optional]
colours yes;
// Animate tracks (yes | no) [optional]
animate yes;
// Animation properties [optional]
animationInfo
{
// Colour map [optional]
colourMap <colourMap>;
// Colour [optional] (uniform | field)
colour uniform;
colourValue (1 0 0); // RGB in range [0-1]
//colour field;
//colourField d;
// Colour map minimum and maximum limits [optional]
// Note: for colour = field option
// Uses field min and max if not specified
min 0;
max 1;
// Alpha channel [optional] (uniform | field)
alpha uniform;
alphaValue 0.5;
//alpha field;
//alphaField T;
//normalise yes;
}
}
\endverbatim
Note
When writing particle animations, the particle field and colour properties
correspond to initial particle state (first data point) and cannot be
animated (limitation of the file format).
For more information on the specification see
https://www.khronos.org/registry/glTF/
The utility will now add field data to all tracks (previous version only
created the geometry)
The new 'fields' entry can be used to output specific fields.
Example
cloud reactingCloud1;
sampleFrequency 1;
maxPositions 1000000;
fields (d U); // includes wildcard support
STYLE: minor typo fix
- specify any of these
./Allwmake -build-root=...
wmake -build-root=...
FOAM_BUILDROOT=... wmake
these specify an alternative root where build artifacts are to land.
Currently only used as an alternative for the 'build/' hierarchy
since the 'platforms/' target normally includes inputs as well.
Possible use:
```
(
export WM_MPLIB="%{foam_mplib}"
export FOAM_MPI="%{foam_mpi}"
export MPI_ARCH_PATH="%{mpi_prefix}"
export FOAM_BUILDROOT=/tmp/mpibuild
export FOAM_MPI_LIBBIN="$FOAM_BUILDROOT/platforms/$WM_OPTIONS/lib/$FOAM_MPI"
src/Pstream/Allwmake-mpi
)
```
- exposed by the new embedded function handling.
Requires local copies of dictionary content instead
(similar to coded BCs handling)
BUG: incorrect formatting for expression function output
ENH: simpler copyDict version taking wordList instead of wordRes
- corresponds to the most common use case at the moment
ENH: expression string writeEntry method
- write as verbatim for better readability
- this revises the changes made in 95cd8ee75c to replace the
SFINAE-type of handling of string hashes with direct definitions.
This places a bit more burden on the developer if creating hashable
classes derived from std::string or variants of Foam::string, but
improves reliability when linking.
STYLE: drop template key defaulting from HashSet
- this was never used and `HashSet<>` is much less transparent
than writing `HashSet<word>` or `wordHashSet`
- Generic thermophysical properties class for a liquid in which the
functions and coefficients for each property are run-time selected.
Code adapted from openfoam.org
- had lookups into the merge-point map instead of
determining/remapping the duplicate points directly.
The result was a jumble of face/point addressing.
STYLE: additional debug/verbosity comment for mergePoints
- marks if the value is considered to be independent of 'x'.
Propagate into PatchFunction1 instead ad hoc checks there.
- adjust method name in PatchFunction1 to 'whichDb()' to reflect
final changes in Function1 method names.
ENH: add a Function1 'none' placeholder function
- This is principally useful for interfaces that expect a Function1
but where it is not necessarily used by a particular submodel.
TUT: update Function1 creation to use objectRegistry
- allows an additional HashTable of pointers to reference external
content which not otherwise directly available via an
objectRegistry.
This could typically be used to provide a function-local "rho"
to the expression evaluation.
- for cell quantities, these evaluate on the faceCells associated with
that patch to produce a field of true/false values
- for face quantities, these simply correspond to the mesh faces
associated with that patch to produce a field of true/false values
- similar idea to swak timelines/lookuptables but combined together
and based on Function1 for more flexibility.
Specified as 'functions<scalar>' or 'functions<vector>'.
For example,
functions<scalar>
{
intakeType table ((0 0) (10 1.2));
p_inlet
{
type sine;
frequency 3000;
scale 50;
level 101325;
}
}
These can be referenced in the expressions as a nullary function or a
unary function.
Within the parser, the names are prefixed with "fn:" (function).
It is thus possible to define "fn:sin()" that is different than
the builtin "sin()" function.
* A nullary call uses time value
- Eg, fn:p_inlet()
* A unary call acts as a remapper function.
- Eg, fn:intakeType(6.25)
- previously simply reused the scan token, which works fine for
non-nested tokenizations but becomes too fragile with nesting.
Now changed to use tagged unions that can be copied about
and still retain some rudimentary knowledge of their types,
which can be manually triggered with a destroy() call.
- provide an 'identifier' non-terminal as an additional catch
to avoid potential leakage on parsing failure.
- adjust lemon rules and infrastructure:
- use %token to predefine standard tokens.
Will reduce some noise on the generated headers by retaining the
order on the initial token names.
- Define BIT_NOT, internal token rename NOT -> LNOT
- handle non-terminal vector values.
Support vector::x, vector::y and vector::z constants
- permit fieldExpr access to time().
Probably not usable or useful for an '#eval' expression,
but useful for a Function1.
- provisioning for hooks into function calls. Establishes token
names for next commit(s).
Returns a 0/1 value corresponding to function object trigger levels.
Usage:
\verbatim
<entryName> functionObjectTrigger;
<entryName>Coeffs
{
triggers (1 3 5);
defaultValue false; // Default when no triggers activated
}
\endverbatim
ENH: add reset() method for Constant Function1
ENH: allow forced change of trigger index
- the triggers are normally increase only,
but can now override this optionally
Description
Function1 wrapper that maps the input value prior to it being used by
another Function1.
Example usage for limiting a polynomial:
\verbatim
<entryName>
{
type inputValueMapper;
mode minMax;
min 0.4;
max 1.4;
value polynomial
(
(5 1)
(-2 2)
(-2 3)
(1 4)
);
}
\endverbatim
Here the return value will be:
- poly(0.4) for x <= 0.4;
- poly(1.4) for x >= 1.4; and
- poly(x) for 0.4 < x < 1.4.
Example usage for supplying a patch mass flux for a table lookup:
\verbatim
<entryName>
{
type inputValueMapper;
mode function;
function
{
type functionObjectValue;
functionObject surfaceFieldValue1;
functionObjectResult sum(outlet,phi);
}
value
{
type table;
file "<system>/fanCurve.txt";
}
}
\endverbatim
Where:
\table
Property | Description | Required
mode | Mapping mode (see below) | yes
function | Mapping Function1 | no*
min | Minimum input value | no*
max | Maximum input value | no*
value | Function of type Function1<Type> | yes
\endtable
Mapping modes include
- none : the input value is simply passed to the 'value' Function1
- function : the input value is passed through the 'function' Function1
before being passed to the 'value' Function1
- minMax : limits the input value to 'min' and 'max' values before being
passed to the 'value' Function1
Note
Replaces the LimitRange Function1 (v2106 and earlier)
Returns a value retrieved from a function object result.
Usage:
<entryName> functionObjectValue;
<entryName>Coeffs
{
functionObject <name>;
functionObjectResult <function object result field name>
}
Function1 can now be created with an object registry, e.g. time or mesh
database. This enables access to other stored objects, e.g. fields,
dictionaries etc. making Function1 much more flexible.
Note: will allow TimeFunction1 to be deprecated
- created new functionObjects::properties class derived from IOdictionary
- replaces raw state IOdictionary owned by functionObjectList
- state dictionary access/manipulators moved from stateFunctionObject
- stateFunctionObject now acts as a light wrapper around
functionObjecties::properties
- updated dependent code
- more closely reflect what the binaries report
- report the installation path
- change PS1 case/separator to roughly correspond to package names
STYLE: adjust README to mention upcoming v2112
- use `#word` to concatenate, expand content with the resulting string
being treated as a word token. Can be used in dictionary or
primitive context.
In dictionary context, it fills the gap for constructing dictionary
names on-the-fly. For example,
```
#word "some_prefix_solverInfo_${application}"
{
type solverInfo;
libs (utilityFunctionObjects);
...
}
```
The '#word' directive will automatically squeeze out non-word
characters. In the block content form, it will also strip out
comments. This means that this type of content should also work:
```
#word {
some_prefix_solverInfo
/* Appended with application name (if defined) */
${application:+_} // Use '_' separator
${application} // The application
}
{
type solverInfo;
libs (utilityFunctionObjects);
...
}
```
This is admittedly quite ugly, but illustrates its capabilities.
- use `#message` to report expanded string content to stderr.
For example,
```
T
{
solver PBiCG;
preconditioner DILU;
tolerance 1e-10;
relTol 0;
#message "using solver: $solver"
}
```
Only reports on the master node.
- use FACE_DATA (was SURFACE_DATA) for similarity with polySurface
ENH: add expression value enumerations and traits
- simple enumeration of standard types (bool, label, scalar, vector)
that can be used as a value type-code for internal bookkeeping.
GIT: relocate pTraits into general traits/ directory
- releases ownership of the pointer. A no-op (and returns nullptr)
for references.
Naming consistent with unique_ptr and autoPtr.
DOC: adjust wording for memory-related classes
- add is_const() method for tmp, refPtr.
Drop (ununsed and confusing looking) isTmp method from refPtr
in favour of is_pointer() or movable() checks
ENH: noexcept for some pTraits methods, remove redundant 'inline'
- test for const first for tmp/refPtr (simpler logic)
- previously had codeAddSup used for both incompressible and
compressible source terms. However, it was not actually possible to
use it for compressible sources since any references to the 'rho'
parameter would cause a compilation error for the incompressible case.
Added 'codeAddSupRho' to distinguish the compressible case.
User must supply one or both of them on input.
- decomposePar: -no-fields to suppress decomposition of fields
- makeFaMesh: -no-decompose to suppress creation of *ProcAddressing
and fields, -no-fields to suppress decomposition of fields only
- switch from default topology merge to point merge if degenerate
blocks are detected. This should alleviate the problems noted in
#1862.
NB: this detection only works for blocks with duplicate vertex
indices, not ones with geometrically duplicate points.
ENH: add patch block/face summary in blockMesh generation
- add blockMesh -verbose option to override the static or dictionary
settings. The -verbose option can be used multiple times to increase
the verbosity.
ENH: extend hexCell handling with more cellShape-type methods
- allows better reuse in blockMesh.
Remove blockMesh-local hex edge definitions that shadowed the
hexCell values.
ENH: simplify some of the block-edge internals
- similar to -dry-run handling, can be interrogated from argList,
which makes it simpler to add into utilities.
- support multiple uses of -dry-run and -verbose to increase the
level. For example, could have
someApplication -verbose -verbose
and inside of the application:
if (args.verbose() > 2) ...
BUG: error with empty distributed roots specification (fixes#2196)
- previously used the size of distributed roots to transmit if the
case was running in distributed mode, but this behaves rather poorly
with bad input. Specifically, the following questionable setup:
distributed true;
roots ( /*none*/ );
Now transmit the ParRunControl distributed() value instead,
and also emit a gentle warning for the user:
WARNING: running distributed but did not specify roots!
COMP: implicit cast scope name to C++-string in IOobject::scopedName
- handles 'const char*' and allows a check for an empty scope name
COMP: avoid potential name conflict in local function (Istream)
- reportedly some resolution issues (unconfirmed) with Fujitsu clang
- added -dry-run, -write-vtk options.
Additional mesh information after creation.
- add parallel reductions and more information for checkFaMesh
ENH: minor cleanup of faPatch internals
- align pointLabels and pointEdges creation more closely with coding
patterns used in PrimitivePatch
- use fileHandler when loading "S0" field.
- previous handling did not correctly account for off-processor
connections (SEGFAULT).
- revised the point/area normal calculations to use the dual of the
faces. This simplifies the logic and reduces the depth of loops.
Point corrections from the neighbouring patches is handled
centrally by the new halo face information, which properly handles
on-processor or off-processor faces irrespective of any explicit
processor patches.
STYLE: local function and add comments for finiteArea area weighting
- following the original Tukovic code, the area-weighted normal
for a vector pair (defining a triangle) is weighted by
(1) area : larger weight for larger areas
(2) sin : lower weight for narrow angles (eg, shards)
(3) invDist squared : lower weights for distant points
Refactored to eliminate intermediate operations, some additional
divide-by-zero protection - similar to vector normalise()
- the finiteArea is typically restricteed to one or more patches on a
polyMesh but will have an external connectivity to other parts of
the polyMesh. For proper determination of the point normals (for
example), the neighbouring information is needed.
These outside 'halo' faces can be located on different processors,
but not correspond to an internal processor-processor interface.
Add a dedicated form of mapDistribute for swapping this type of
information. Since this is a collective operation, locate
corresponding methods directly on the faMesh level instead of
the faPatch level.
- the case of 'fan-like' processor was previously assumed to be
rare (see merge-request !490 and issue #2084).
However, Vaggelis Papoutsis noticed that even fairly normal geometries
can trigger problems.
- replaced the old patch/patch matching style with a more general
edge-based synchronisation and matching that appears to handle
the corner cases inherently. The internal communication overhead
is essentially unchanged, and the logic is simpler.
ENH: additional framework for managing patch connectivity
- the patch remapping in faFieldDecomposer calls weights
internalField() which can trigger parallel communication on the
complete mesh for some processors only (ie, blocks).
Force a priori creation of weights instead.
- ensure that the complete mesh (reconstruction helper)
is serial when adding patches.
- when creating a finite-area mesh in parallel, need to determine
the equivalent ProcAddressing for the faMesh.
In the faceProcAddressing the collected and sorted order was being
scattered directly back to the individual processors instead of only
the sections relevant to each particular processor.
This caused the observed jumbled order for reconstructed fields.
- this makes the lookup and use of tables slightly cleaner and
provides a hook for update (compat) messages
The singleton-style method returns the function pointer directly,
or nullptr on not-found.
NEW access method (mnemonic: 'ctor' prefix for constructors)
```
auto* ctorPtr = dictionaryConstructorTable(modelType);
if (!ctorPtr)
{
...
}
return autoPtr<myModel>(ctorPtr(dict, ...));
```
OLD method, which also still works, but without any compat handling:
```
auto ctorIter = dictionaryConstructorTablePtr_->cfind(modelType);
if (!ctorIter.found())
{
...
}
return autoPtr<myModel>(ctorIter()(dict, ...));
```
- a Pstream::master with a Pstream::parRun guard in case Pstream has
not yet been initialised, as will be the case for low-level messages
during startup.
- propagate relativeName handling into IOstreams
- better distinction between content and storage type
by appending 'Type' to the typedef.
old: 'Class::abcConstructorTable* tablePtr'
new: 'Class::abcConstructorTableType* tablePtr'
Was rarely used in any exposed code.
BREAKING: LESdelta::New with additional table
- parameter change to dictionaryConstructorTableType
(was dictionaryConstructorTable)
Example using mean turbulence fields (mean fields should be available e.g. from
a fieldAverage function object)
proudmanAcousticPower1
{
// Mandatory entries (unmodifiable)
type proudmanAcousticPower;
libs (fieldFunctionObjects);
...
// Turbulence field names (if not retrieved from the turb model)
k kMean;
epsilon epsilonMean;
omega none; // omegaMean
}
- was taking from the current head instead from specified commit-ish
ENH: add -debian=NUM convenience option to foamPackRelease
STYLE: relocate compile begin/end messages
COMP: suppress more clang warnings (needed for boost)
- provide a plain stream() method on messageStream to reduce reliance
on casting operators and slightly opaque operator()() calls etc
- support alternative stream for messageStream serial output.
This can be used to support local redirection of output.
For example,
refPtr<OFstream> logging; // or autoPtr, unique_ptr etc
// Later...
Info.stream(logging.get())
<< "Detailed output ..." << endl;
This will use the stdout semantics in the normal case, or allow
redirection to an output file if a target output stream is defined,
but still effectively use /dev/null on non-master processes.
This is mostly the same as this ternary
(logging ? *logging : Info())
except that the ternary could be incorrect on sub-processes,
requires more typing etc.
ENH: use case-relative names of dictionary, IOstream for FatalIOError
- normally yields more easily understandable information
- argList::envExecutable() static method.
This is identical to getEnv("FOAM_EXECUTABLE"), where the name of
the executable has typically been set from the argList construction.
Provides a singleton access to this value from locations that
do not have knowledge of the originating command args (argList).
This is a similar rationale as for the argList::envGlobalPath() static.
- additional argList::envRelativePath() static method.
- make -dry-run handling more central and easier to use by adding into
argList itself.
STYLE: drop handling of -srcDoc (v1706 option)
- replaced with -doc-source for 1712 and never used much anyhow
- for compilers such as gcc and clang, may have several different
variants installed on the computer. Use WM_COMPILER_CONTROL to
specify the preferred variant.
Eg,
WM_COMPILER=Gcc
WM_COMPILER_CONTROL="version=8"
will compile with "gcc-8" and "g++-8"
Good practice would be to tag output directory names with the
version too. Eg
WM_COMPILER=Clang110
WM_COMPILER_CONTROL="version=11.0"
STYLE: modify message for change of gcc -> clang (darwin)
- using the proximityRegions filter when there is no enclosing surface
to segregate domains causes a surface of zero-faces to be created.
In most cases, this means that a simpler proximityFaces filter would
have been more appropriate. To increase overall robustness, revert
to the simpler proximityFaces filter logic when the proximityRegions
would otherwise result in zero faces (globally seen).
- reuse single component buffer within an Ensight output method.
Use direct UPstream read/write to avoid Pstream char buffers
- replace blocking transfer with scheduled for Ensight cloud output
- UPstream::mpiGather (MPI_Gather) - used by Pstream::listGatherValues
- UPstream::mpiScatter (MPI_Scatter) - used by Pstream::listScatterValues
These are much simpler forms for gather/scatter of fixed-sized
contiguous types data types (eg, primitives, simple pairs etc).
In the gather form, creates a list of gathered values on the master
process. The subranks have a list size of zero.
Similarly, scatter will distribute a list of values to single values
on each process.
Instead of
labelList sendSizes(Pstream::nProcs());
sendSizes[Pstream::myProcNo()] = sendData.size();
Pstream::gatherList(sendSizes);
Can write
const labelList sendSizes
(
UPstream::listGatherValues<label>(sendData.size())
);
// Less code, lower overhead and list can be const.
For scattering an individual value only,
instead of
labelList someValues;
if (Pstream::master()) someValues = ...;
Pstream::gatherList(sendSizes);
const label localValue
(
someValues[Pstream::myProcNo()]
);
Can write
labelList someValues;
if (Pstream::master()) someValues = ...;
Pstream::gatherList(sendSizes);
const label localValue
(
UPstream::listScatterValues<label>(someValues)
);
Can of course also mix listGatherValues to assemble a list on master
and use Pstream::scatterList to distribute.
ENH: adjusted globalIndex gather methods
- added mpiGather() method [contiguous data only] using MPI_Gatherv
- respect localSize if gathering master data to ensure that a
request for 0 master elements is properly handled.
- Pstreams can be ascii/binary but are always currentVersion
- rename UIPstream externalBuf_ to 'recvBuf_' for similar naming as
PstreamBuffers and symmetry with UOPstream::sendBuf_
- specific enum size for commsType (for more compact structures in the
future). Default construct lists items.
BUG: possible incidental indexing in UIPstream::read(char*, std::streamsize)
- raw reading had been split into beginRawRead(), readRaw().
However, this could change the current input position (due to word
boundary alignment), even if the expected count is zero. Make a
no-op for count == 0. This mirrors UOPstream::write behaviour.
- construct or reset from a list of local sizes. It is generally
easier and safer to assemble sizes and let globalIndex determine the
corresponding offsets, when working with raw values.
- Can use reset() from sizes or fine-tune offsets with setLocalSize()
instead of using the potentially more fragile non-const access to
the offsets.
- add globalIndex const_iterator to iterate across the access ranges.
This is makes it simpler to use with the List slice() method to
access or operate on a sub-section of list.
For example,
scalarField allValues = ...;
globalIndex procAccess = ...;
for (const labelRange& range : procAccess)
{
someOutput(allValues.slice(range));
}
- the size of a List often requires adjustment prior to an operation,
but old values (if any) are not of interest and will be overwritten.
In these cases can use the _nocopy versions to avoid additional memory
overhead of the intermediate list and the copy/move overhead of
retaining the old values (that we will subsequently discard anyhow).
No equivalent for PtrList/UPtrList - this would be too fragile.
- add swap DynamicField with DynamicList
BUG: fixed Dynamic{Field,List} setCapacity corner case
- for the case when the newly requested capacity coincides with the
current addressable size, the resize of the underlying list would have
been bypassed - ie, the real capacity was not actually changed.
- remove (unused) PtrDynList setCapacity method as too fragile
- previously returned the range slice as a UList,
but this prevents convenient assignment.
Apply similar handling for Field/SubField
Allows the following
labelRange range(...);
fullList.slice(range) = identity(range.size());
and
fullList.slice(range) = UIndirectList<T>(other, addr);
ENH: create SubList from full FixedList (simplifies interface)
- allow default constructed SubList. Use shallowCopy to 'reset' later
- simply adds in the reinterpret_cast, which simplifies coding for
binary data movement.
Name complements the size_bytes() method for contiguous data
STYLE: container IO.C files into main headers for better visibility
STYLE: include CompactListList.H in polyTopoChange
- avoids future mismatches if the CompactListList template signature
changes
GIT: relocate CompactListList into CompactLists/ directory
- previously used an indirect patch to get the sampling locations,
but this doesn't take account of the face flips. Now use
the faceZone intrinsic for generating a properly flipped patch
and provide the sampling locations separately.
STYLE: adjust compatiblity header for surfaceMeshWriter
- it is now possible to include the selected mpi version in the
top-level bashrc or prefs.sh file. For example,
WM_MPLIB=OPENMPI-4.1.1 or WM_MPLIB=openmpi-4.1.1
after evaluation of the config.sh/mpi, this will define
WM_MPLIB=OPENMPI-4.1.1 and FOAM_MPI=openmpi-4.1.1
During the wmake, the mpi-rules will first load the MPI 'family'
rules (OPENMPI in this example) before trying to load
version-specific rules if they exist.
NOTE: the regular user-defined prefs system is unaffected by this
change. This means it is still possible to use a file such as
'prefs.openmpi' to define the preferred version instead or as well.
However, it does mean inconsistent naming can be specified.
For example, specify WM_MPLIB=OPENMPI-4.1.1 at the top-level but
actually have FOAM_MPI=openmpi-4.0.6 in the prefs.openmpi file.
This will make the value of WM_MPLIB misleading.
CONFIG: foamConfigurePaths support for sys-openmpi major version
CONFIG: cleanup any shadow env variables
- migrate to c++14 for most compilers *except* gcc.
There are still many systems in use with gcc-4.8.5, which does not
support c++14.
- initial rules for nvidia compilers (pgi is will soon be defunct).
Not fully tested...
CONFIG: provide fallback value for the user directory name
- in containers may have an unset USER env variable.
Default to 'user' to prevent ugly looking directory names.
- supports redistributePar -decompose -fileHandler collated
- supports redistributePar -reconstruct
- does not support redistributePar with collated in redistribution mode
- noticed by Robin Knowles with `decomposePar -fields -copyZero`
The internals for the Foam:cp method combine the behaviour of
a regular `cp` and `cp -R` combined.
When source and target are both directories, the old implementation
created a subdirectory for the contents.
This normally fine,
ok: cp "path1/0/" to "path2/1" -> "path2/1/2"
BUT: cp "path1/0/" to "path2/0" -> "path2/0/0" !!
Now add check for the basenames first.
If they are identical, we probably meant to copy directory contents
only, without the additional subdir layer.
BUG: decomposePar -fields -copyZero copies the wrong directory
- was using the current time name (usually latest) instead of copying
the 0 directory
ENH: accept 0.orig directories as a fallback to copy if the 0 directory
is missing
- use orte-info to determine prefix/libdir for openmpi.
This removes a run-time dependency on mpicc, which is actually
only needed for building with MPI (not running with MPI).
The corresponding openmpi devel package (deb/rpm) will not
necessarily be installed on a particular system.
- retain mpicc logic if the new logic using orte-info does not
deliver an answer. Final fallback to using 'orterun' to
infer prefix/libdir.
- Additional logic for intel and msmpi to make it easier to
locate these vendor packages within ThirdParty
(ie, under ThirdParty/opt/...)
CONFIG: improve robustness
- add check for absolute path when adding PATH/LD_LIBRARY_PATH etc.
- prefix more variables with '_foam*' to prevent accidental overwrite
of userspace shell variables when sourcing
- avoid deprecated autoPtr check
- bundle bool values in fvPatchField for compacter allocation
- change useImplicit to a set method taking an argument instead of
allowing direct access.
- top-level faceCells() on the boundary list simplifies the creation
of lduAddressing etc, can also be useful on its own
STYLE: replace isA/refCast combination with a single isA
- helps avoid the creation of small face cuts (near corners, edges)
that result in zero-size faces on output.
CONFIG: make default iso-surface topo regularisation less aggressive
- The full (diagcell) regularisation no longer includes cleaning of
non-manifold surfaces by removing open edges.
This can be selected by the 'clean' regularisation option instead.
ie, 'clean' = 'full' + erode open edges
ENH: additional debug modes for iso-surface topo
- with (debug & 8) dumps out a VTK file of the tets to be cut and the
calculated open edges.
- PstreamBuffers for parallel VTK output.
- avoids MPI overflows for larger meshes
- new vtk::lineWriter for writing edges
- vtk::fileWriter::writeUniform now also supports processor-specific
uniform values instead of assuming that they are identical everywhere.
- support simple mesh subsetting to vtu formats to enable debug output
for a subsection of an existing polyMesh
- rudimentary support for VTK from cellShapes is intended for handling
basic primitive cell shapes without a full blown polyMesh description.
For example,
// Create an empty polyMesh with points only
polyMesh debugMesh
(
io,
std::move(points),
faceList(), // faces
labelList(), // owner
labelList(), // neighbour
true // syncPar
);
// Establish the appropriate VTK sizing for the TET shapes
vtk::vtuCells vtuCells;
vtuCells.resetShapes(debugCutTets);
vtuCells.nPoints(debugMesh.nPoints());
NOTE
Since the vtk::internalMeshWriter only uses the polyMesh reference
for the points, it is also possible to create the vtuCells
description without a pointField (or from a different mesh
description) and write out the connectivity using the pointField
from a different mesh.
This intercepts all vector/tensor AMI interpolations and
does the interpolation in cylindrical coordinates.
Use (component) 'coupled' linear solver to enable this in
the linear solver sweeps.
- previously used the size of distributed roots to transmit if the
case was running in distributed mode, but this behaves rather poorly
with bad input. Specifically, the following questionable setup:
distributed true;
roots ( /*none*/ );
Now transmit the ParRunControl distributed() value instead,
and also emit a gentle warning for the user:
WARNING: running distributed but did not specify roots!
- use dictionary methods directly in LduMatrix::solver::readControls.
Deprecate the redundant LduMatrix::solver::readControl helper-function
- define solver log-level outside of the loop,
narrow log flag to int.
- reinstate API-compatible parameters for SolverPerformance
- allows reuse of an int64_t scotch library with label-size 32
and/or label-size 64.
COMP: prefer scotch/metis/kahip libraries with label-size qualifiers
- as noted in #2200, mpirun may insert mpi libraries higher in the
library loader which can cause masking of our ThirdParty libraries
of the same name. With scotch (for example), the operating system
may have an int32 version installed but we have an int64 version
compiled under ThirdParty. Runing in serial is fine, but in parallel
we resolve to the (incorrect) system version due to the adjustments
in mpirun.
- adjust the ThirdParty make scripts to also create corresponding
links (eg, 'ln -s libscotch.so libscotch-int64.so') and prefer
linkage with these qualified libraries.
Eg, -L$(SCOTCH_LIB_DIR) -lscotch$(SCOTCH_LIBNAME_SUFFIX)
this prevent accidental runtime linkage with the system versions.
STYLE: simplify scotch interface code by using local functions
- allows reuse similar to refPtr for wrapping different content.
- additional control for when contents are copied back,
instead of waiting for the adaptor to go out of scope.
Eg,
if (adaptor.active())
{
adaptor.commit();
adaptor.clear();
}
- static ConstPrecisionAdaptor::get method renamed to 'select' as a
better description of its purpose and avoid confusion with
non-static 'get' method.
Was previously only used within GAMGPreconditioner, but even there
it is better just to use the ConstPrecisionAdaptor directly.
For cases where the number of injectors exceeded the number of parcels to
inject, processing the injectors sequentially led to not all injector locations
being active and yielding non-physical spatial distributions.
Previous naming conventions for input variables in the
normal, multiNormal, RosinRammler, and massRosinRammler
distributions were heuristic and did not reflect
the de facto conventions being used in statistics.
BUG: distributionModel: disallow any distribution
where input min is equal to input max
ENH: distributionModel: ensure execution of check() at ctor level
Previously, for basic incompressible and compressible simulations,
the "force" function object has not been using the user-specified "UName"
for the "devRhoReff" computation (affecting the tangential component),
but using the "U" of the latest available step. In contrast,
the user-specified "pName" has always been being used correctly.
This has been causing issues for users when they wish to use a specific
"UMean" field in various force and forceCoeff function object computations.
Introduces a new optional keyword of label type 'log'
to linear-solver dictionaries to enable variable-specific
debug statements. For example, in fvOptions file:
solvers
{
p
{
solver GAMG;
...
log 2;
}
U
{
...
log 0;
}
}
The meanings of values of 'log' are:
log 0; <!-- no output
log 1; <!-- standard output
log 2; <!-- debug output
// values higher than 2 are expected to have no effect
This keyword does not directly affect the operations of various
DebugSwitches and backward compatibility has been ensured in exchange
of code cleanness. The related DebugSwitches are:
DebugSwitches
{
SolverPerformance 0;
GAMG 0;
PCG 0;
PBiCG 0;
smoothSolver 0;
}
- previously reported the WM_PROJECT_VERSION in the top banner
but this makes it overly sensitive to arbitrary user naming.
Change to the current API in the comment banner, include the
WM_PROJECT_VERSION as part of the reported "Build: ..."
string instead.
- previously had a patch-size check, which caused a zero-sized patch
to be "sticky" as uniform Zero regardless of what the original input
stated (eg, "constant 0.5")
This was caused by short-circuiting logic that circumvented reading
on zero-size patches.
- support non-uniform scaling, prescaling and cartesian coordinate
transformations.
Eg, stretch in one direction and then rotate
```
prescale (1.5 1 1);
transform
{
origin (0 0 0);
rotation
{
type axisAngle;
axis (0 0 1);
angle 45;
}
}
```
- support "transformed" versions of blockMesh vertices, topology.
With the additional of transformations etc, a simplistic application
of a single scale parameter is no longer sufficient.
new: blMesh.vertices(true);
old: blMesh.vertices() * blMesh.scaleFactor();
new: blMesh.topology(true);
old: N/A
- add individual edge access for blockDescriptor.
Saves copying and duplicate calculations.
- handle '(block face)' specification for curved faces,
which is ok for external block faces, but likely somewhat
questionable if used for internal block faces.
- Can specify
```
transform
{
origin (1 2 3);
rotation none;
}
```
instead of the longer form
```
transform
{
origin (1 2 3);
e1 (1 0 0);
e3 (0 0 1);
}
```
COMPAT: remove old (pre-1812) Euler and STARCD keywords
- use "angles", remove old compat name "rotation"
as clutter and possible confusion with "coordinate rotation"
STYLE: remove coordinate rotation move constructors
- an unnecessary holdover from older code.
- for v2106 restricted the input conversion of string types to disallow
treating verbatim strings as possible word input.
However, it was too strict in just allowing quoted strings
and should have also permitted '$'-sigil variables as well.
- ensure that errors for bad string -> word input conversion
are raised from within the '>>' read operator. These were
previously triggered during the stripping process, which
made error tracing more difficult.
The original thermoSurfaceFilm sub-models were divided between kinematicSurfaceFilm and thermoSurfaceFilm in order to use the surfaceFilm model in a kinematicCloud.
The film interaction models are now in a kinematicSurface class which can be used in a kinematic cloud adding constant thermal properties (p and T) for some sub-models, e.g. drySplashInteraction/wetSplashInteraction.
pRef and Tref were added to the kinematicSurfaceFilm as entry to the regionFilm when used with a kinematic cloud.
In the finite area surface film model Tref, pRef are stored in filmSubModelBase.
TUT: kinematicParcelFoam: new tutorial pitzDailySprinkles
ENH: Several additions to thinFilm models
1) Changing the faSolution entry nonOrthoCorr to nFilmCorr entry.
This entry specify the number of iterations on the film thickness
Eq which does not correct for laplacian non-orthogonality.
2) Changing laminar turbulent model for the skin friction exerted by
the flow to the film.
3) Adding optional relaxation factors for source terms coming from
the added mass of the lagragian particles into the film such as
rhoSp, pnSp and Usp. Similarly the film pressure (pf) can be
relaxed in the inner loops.
4) Adding optional entries to curvatureSepration injection model.
minimum (fThreshold) force and minimum curvature (minInvR1) for
separation were added to have more control on determining the
points of film separation
ENH: ThermoSurfaceFilm in lagragian to search for finiteArea film models
- new model framework: liquidFilm
- new film turbulence models: filmTurbulenceModel with friction models
- new velocity boundary condition: velocityFilmShell to handle/evolve regionFa film
- new function object: setTimeStep to control the simulation time-step based on regionFa Courant number
- add support for the absorption of Lagrangian particles into films
Issue first shows up on gcc-11 with these types of library symbols:
U Foam::tableReader<double>::dictionaryConstructorTablePtr_[abi:cxx11]
xx B Foam::tableReader<double>::dictionaryConstructorTablePtr_
Use concrete hasher functor for runtime selection tables, which
avoids any additional template resolutions (introduced with
95cd8ee75c). The library symbols now resolve _without_ an
additional abi:cxx11 tag.
- need to change requireUpdate_ at the beginning of calculateCache
otherwise it is not updated for "ALL" selection (causing unnecessary
repeated calculations). For other modes, it would have tripped
an error in FULLDEBUG.
- all flags before loaders. Avoids "uninitialized when used here"
warning while preserving the field ownership logic.
- relocate override of updateT basicThermo into constructor body
for clearer logic and initialization
STYLE: plain bool instead of Switch for dpdt flag
1) Adding subMesh capabilities to momentumError and div FOs.
- A subMesh is created from cellZones.
- The operators (div, etc) are only calculated in the subMesh.
2) Optionally, halo cells can be added to the cellZones.
3) New helper class to handle the subMesh creation and field mapping.
- add setter/getter methods for number of grow/shrink steps,
which allows reuse of the same object.
- remove the lower input hard-limit of 1 step, to allow definition of
a no-op filter.
- drop early exit from grow/shrink cycle (potential parallel issues).
- previously a function (unlike the csh version) but since bashrc and
setup have been split -> replace with inline definition
STYLE: formatting/wording for openfoam starters
TUT: simplify controlDict modification, add default substitution
ENH: accept '/' for end-of-options terminator (etc/openfoam)
- makes the application or service more apparent.
* eg. /usr/bin/openfoam / blockMesh
* vs. /usr/bin/openfoam -- blockMesh
Accept lone '-' as the end-of-options terminator, as per bash
- Adjust handling of openfoam '-c' option to flag that a command-string
will appear, but continue with option parsing.
Consistent with bash definition.
- in the 'auto' mode (now the default), it will use cleanCase and also
remove the 0/ directory if a 0.orig/ directory also exists.
This corresponds to a frequent idiom and can be used quite safely
for most cases.
ENH: add -serial / -parallel preference for foamRunTutorials
- adjust commented-out evaluation to avoid warnings.
With code like this
```
#if 0
nxin #eval{ round($nxin / 5) };
#endif
```
The handling of the "#if 0 / #endif" clause uses the plain ISstream
parser to tokenize. This means that the "round(" is parsed as a word
with a mismatched closing ')', whereas the "#eval" parser will slurp
everything in until the closing brace and send it off as a string
to the expression parser.
- Added new faceAreaWeightAMI2D AMIMethod:
- performs intersection using a new 2D triangle class;
- candidate face matches set using an AABBTree method (vs advancing front for
faceAreaWeightAMI).
- Use by setting the AMIMethod entry when specifying the AMI in the
constant/polyMesh/boundary file, e.g.
AMI
{
type cyclicACMI;
AMIMethod faceAreaWeightAMI2D; // new method
Cbb 0.1; // optional coefficient
nFaces 1000;
startFace 100000;
matchTolerance 0.0001;
transform noOrdering;
neighbourPatch AMI1;
nonOverlapPatch AMI1_non_overlap;
}
- The optional Cbb coeffcient controls the size of the bounding box used when
looking for candidate pairs; the value of 0.1 is the default and worked well
for a large range of test cases. For badly matched AMI patches this may need
to be increased.
- Deprecated the partialFaceAreaWeightAMI class - primarily used by ACMI:
- functionality now offered by the AMI variants.
- prghPermeableAlphaTotalPressure for p_rgh
- pressurePermeableAlphaInletOutletVelocity for U
- new helper class for pressure-related BCs: updateableSnGrad
Wrapper that clones the supplied object for each region.
Simplifies the setup of identical post-processing requirements for
multi-region cases.
Applies the supplied function to all regions by default.
Example of function object specification:
multiRegion
{
type multiRegion;
libs (utilityFunctionObjects);
...
function
{
// Actual object specification
type fieldMinMax;
libs (fieldFunctionObjects);
fields (<field1> .. <fieldN>);
}
// Optional entries
regions (region1 region2);
}
Where the entries comprise:
Property | Description | Reqd | Default
type | Type name: multiRegion | yes |
function | Function object sub-dictionary | yes |
regions | List of region names | no | all
Computes a selected operation between multiple \c fieldValue function
objects.
The operation is applied to all results of each \c fieldValue object.
Note
Each object must generate the same number and type of results.
Usage
Minimal example by using \c system/controlDict.functions:
multiFieldValue1
{
// Mandatory entries (unmodifiable)
type multiFieldValue;
libs (fieldFunctionObjects);
// Mandatory entries (runtime modifiable)
operation subtract;
// List of fieldValue function objects as dictionaries
functions
{
region1
{
...
}
region2
{
...
}
...
regionN
{
...
}
}
// Optional (inherited) entries
...
}
where the entries mean:
Property | Description | Type | Req'd | Dflt
type | Type name: multiFieldValue | word | yes | -
libs | Library name: fieldFunctionObjects | word | yes | -
operation | Operation type to apply to values | word | yes | -
functions | List of fieldValue function objects | dict | yes | -
\endtable
Options for the \c operation entry:
add | add
subtract | subtract
min | minimum
max | maximum
average | average
Deprecated fieldValueDelta
- The fieldValueDelta function object was originally written to compute the
difference between two fieldValue-type function objects. The multiFieldValue
object name better describes its purpose whilst being able to operate on an
arbitrary number of fieldValue-type objects.
Currently only applied to the fanFvPatchField, e.g.
plane
{
type fan;
patchType cyclic;
jump uniform 0;
value uniform 0;
uniformJump false;
// Optional under-relaxation
relax 0.2;
...
}
- combines region-based and proximity-based filtering
proxityRegions (post-filter):
Checks the distance of the resulting faces against the original
search surface. Filters based on the area-weighted distance
of each topologically connected region.
If the area-weighted distance of a region is greater than
\c absProximity, the entire region is rejected.
STYLE: 'proxityFaces' as newer synonym for 'proximity' filter
- snGrad, internalField, neighbourField.
Functional use as per swak: "... + internalField(T) ..."
ENH: additional volume/patch expressions
- deltaT()
STYLE: rename exprDriverWriter -> fvExprDriverWriter
- the original class name was a misnomer since it holds a reference
to fvExprDriver
BUG: expression faceToPoint/pointToFace definitions were flipped
ENH: refactor expression hierarchy and code style
- handle TimeState reference at the top-level for simpler derivations
- unified internal search parameters (cruft)
- support wordRes for selecting patch names
- ownerPolyPatch specification is now optional, which simplifies input
and also supports a faMesh spanning different patches but with a
single boundary condition.
Alternatively, can specify more granularity if required.
```
polyMeshPatches ( "top.*" );
boundary
{
inlet1
{
type patch;
ownerPolyPatch top1; // <- specific to this portion
neighbourPolyPatch inlet;
}
inlet2
{
type patch;
ownerPolyPatch top2; // <- specific to this portion
neighbourPolyPatch inlet;
}
outlet
{
type patch;
neighbourPolyPatch outflow;
}
bound
{
type symmetry;
neighbourPolyPatch bound;
}
}
```
- additional -serial/-parallel option:
prefer Allrun-serial or Allrun-parallel if available
- optional -output=DIR to preserve output
ENH: report missing tutorials/ directory in RunFunctions
- add to wmakeFunctions to ensure it works even without 'make' being
installed. Exit immediately after -show-api for consistency with
-version.
foamEtcFile:
- drop warnings for some old (pre-v1812) defunct options
and simply flag as unknown options.
- handle -version, --version as equivalent to -show-api
Prior to the commit, initial residual fields were registered by
the `setResidualField()` function of a linear solver with a field name
prefixed by `residual:`. However, `solverInfo` FO could only access to
the initial residual fields prefixed by `initialResidual:`.
Due to this discrepancy, using `solverInfo` FO with `writeResidualFields=true`
option was resulting in empty residual fields to be output.
- ENH: turbulentDFSEMInlet: add normalisation factors for
input Reynolds stresses, mean velocity and integral-length
scales as entries `Uref` and `Lref`.
- ENH: turbulentDFSEMInlet: add scaling factor entries, `scale`
and `m`, to enable users to tune C1 normalisation coefficient,
if need be.
- BUG: turbulentDFSEM: (fixes#1004#1744#2089)
- see #2090 for theoretical issues related to the DFSEM method.
three macros:
- makeParcelCloudFunctionObjects for kinematic parcels
- makeThermoParcelCloudFunctionObjects for thermo parcels
- makeReactingParcelCloudFunctionObjects for reacting parcels
code style and quality improvements
renamed recon::centre to interfaceCentre.{groupName}
ranmed recon::normal to interfaceNormal.{groupName}
centre and normal field are not written by default
- makes it easier to use for local or alternative storage.
Eg,
```
tmp<volScalarField> tfld;
tfld.cref(obj.cfindObject<volScalarField>("name"));
if (!tfld)
{
tfld = volScalarField::New("name", ...);
}
```
- in some cases, additional dictionary inputs are useful for extending
the input parameters or functionality of dynamic coded conditions.
Typically this can be used to provide a simple set of dictionary
inputs that are used to drive specific code, but allows changing the
inputs without causing a recompilation.
Accessed with this type of code:
```
const dictionary& dict = this->codeContext();
```
boundary conditions and function objects:
* specify an additional codeContext dictionary entry:
```
codeContext
{
...
}
```
PatchFunction1:
* The code context dictionary is simply the dictionary used to specify
the PatchFunction1 coefficients.
To replicated persistant data, use local member static data.
Eg,
```
code
#{
// Persistent (Member) Data
static autoPtr<Function1<scalar>> baseVel;
static autoPtr<Function1<vector>> baseDir;
...
#}
```
fvOptions:
* currently not applicable
- meshTools include/library for many (most) coded items
- add PatchFunction1 include for coded BCs to provide ready access
to Function1 and PatchFunction1
- resizes to current fieldNames_ size and assigns everything to
false to avoid any "stickiness" if the field ordering changes
between reads.
ENH: additional debugging faOption/fvOption (#2110)
- aids tracing which sources are being used/ignored
- update code style
STYLE: rename CodedSource -> CodedFvSource
- avoid future name clashes with CodedFaSource
- with the changes in vtkCellArray, the legacy files now have
OFFSET, CONNECTIVITY information.
- support reading of both versions.
- continue to generate legacy format 2.0, since this is what
many programs still expect
- consider the neighbour polyPatch addressing on the connecting edge,
even when the neighbouring processor does not have a corresponding
section of the finiteArea mesh.
These "dangling" edges now propagate their real connectivity across.
- A bare-bones reconstructor for finiteArea meshes when processor
meshes are available (in parallel) but an equivalent serial faMesh
is needed for reconstruction or decomposition.
In these situations, a serial version of the faMesh is needed,
but preferably without reconstructing the entire volume mesh.
It uses the finiteVolume faceProcAddressing in addition to
the geometric information available from the underlying polyMesh.
The resulting equivalent faMesh can be used for basic operations,
but caution should be exercised before attempting large operations.
- adjust surfactantFoam/planeTransport tutorial to have partial
coverage of the plate by the finiteArea mesh.
Depending on the decomposition, the outflow boundary may coincide
with a processor patch (good for testing purposes).
- additional Allrun-parallel versions for targetted future behaviour
- improved separation of patch creation that is also parallel-aware,
which now allows creation in parallel
- memory-safe use of PtrList for adding patches, with a more generalized
faPatchData helper
- use uindirectPrimitivePatch instead of indirectPrimitivePatch
for internal patch handling.
- align boundary methods with polyMesh equivalents
- system/faMeshDefinition instead of constant/faMesh/faMeshDefinition
as per blockMesh convention. Easier to manage definitions, easier
for cleanup.
- drop inheritence from GeoMesh.
- depending on how the finiteArea is split up across processors,
it is possible that some processors have failed to register
fields in their object registry.
Now ensure that the field names are synchronized in parallel before
attempting a write. Replace locally missing fields with a dummy
zero-sized field.
- refine definition of patch boundary faces to distinguish between
boundaryFaces() and uniqBoundaryFaces().
* boundaryFaces() for edge to face lookup on boundary edges.
* uniqBoundaryFaces() for accessing quantities such as face areas
or eroding an outer layer
ENH: LabelledItem container, replaces unused 'Keyed' container
- method names in alignment with objectHit, pointIndexHit etc.
Top-level name aligns with labelledTri.
- provide '-clean' option for removing old files
- handle out of order '-decomposeParDict' as per RunFunctions
- implicit no-prompt '-yes' with the shortcuts (eg, -log, -xterm)
and set -local if not already defined
- accept <return> to select defaults
This is a partial fix for #2103. If there are no points
extruded for a stand-alone mesh (so not adding to mesh)
it should still include the original patch points. Not
doing so would generate illegal faces (also copiedPatchPoints
would not get set).
- can now drop older Test-decomposePar for exploration purposes
and simply use -dry-run with the -domains and -method options.
- write VTK file instead of volScalarField in combination
with -dry-run and -cellDist.
Avoids adding any OpenFOAM fields and is usually faster to load.
Also easier to rename than a volScalarField would be when exploring
multiple decompositions.
* removed internal upper limit on word/string length for parsed input.
- Although it has not caused many problems, no reason to retain
these limits.
- simplify some of the internal logic for reading string-like items.
- localize parsers for better separation from the header
- expose new function seekCommentEnd_Cstyle(), as useful
handler of C-style comments
* exclude imbalanced closing ')' from word/variable
- previously included this into the word/variable, but makes more
sense to leave on the parser for the following token.
Prevents content like 'vector (10 20 $zmax);' from being parsed
as '$zmax)' instead of as '$zmax' followed by a ')'.
No conceivable reason that the former would actually be desirable,
but can still be obtained with brace notation: Eg, '${zmax)}'
* consistent handling of ${{ ... }} expressions
- within a dictionary content, the following construct was
incorrectly processed:
value ${{2*sqrt(0.5)}};
Complains about no dictionary/env variable "{2*sqrt(0.5)}"
Now trap expressions directly and assign their own token type
while reading. Later expansion can then be properly passed to
the exprDriver (evalEntry) instead of incorrectly trying
variable expansion.
Does not alter the use of expressions embedded within other
expansions. Eg, "file${{10*2}}"
* improve #eval { ... } brace slurping
- the initial implementation of this was rudimentary and simply
grabbed everything until the next '}'. Now continue to grab
content until braces are properly balanced
Eg, the content: value #eval{${radius}*2};
would have previously terminated prematurely with "${radius" for
the expression!
NOTE:
both the ${{ expr }} parsed input and the #eval { ... } input
discard C/C++ comments during reading to reduce intermediate
overhead for content that will be discarded before evaluation
anyhow.
* tighten recognition of verbatim strings and expressions.
- parser was previously sloppy and would have accepted content such
as "# { ..." (for example) as an verbatim string introducer.
Now only accept parse if there are no intermediate characters
discarded.
- minor simplification of #if/#endif handling
ENH: improve input robustness with negative-prefixed expansions (#2095)
- especially in blockMeshDict it is useful to negate an value directly.
Eg,
```
xmax 100;
xmin -$xmax;
```
However, this fails since the dictionary expansion is a two-step
process of tokenization followed by expansion. After the expansion
the given input would now be the following:
```
xmax 100;
xmin - 100;
```
and retrieving a scalar value for 'xmin' fails.
Counteract this by being more generous on tokenized input when
attempting to retrieve a label or scalar value.
If a '-' is found where a number is expected, use it to negate the
subsequent value.
The previous solution was to invoke an 'eval':
```
xmax 100;
xmin #eval{-$xmax};
```
which adds additional clutter.
- intended for the following type of use:
auto oldHandler = fileHandler(fileOperation::NewUncollated());
... do something that only works with uncollated
// Restore previous (if any)
if (oldHandler)
{
fileHandler(std::move(oldHandler));
}
ENH: make fileOperation distributed(bool) mutable
- use is "static-like" and akin to Pstream::parRun(bool),
thus allow toggling of the switch without a const_cast
- return internalEdges() and boundaryEdges() sub lists directly
- calculate and return boundaryFaces() to identify faces attached to
boundary edges.
- minor code cleanup, and add PrimitivePatchBase class for
non-templated code.
STYLE: mark unused parameter in globalMeshData mergePoints
- this constructor was added for similarity with std::vector,
but continues to cause various annoyances.
The main problem is that the templated parameter tends to grab
anything that is not a perfect match for other constructors.
Typically seen with two integers (in 64-bit mode), but various other
cases as well.
If required, the ListOps::create() function provides a lengthier
alternative but one that can also incorporate transformations.
Eg,
pointField pts = ....;
List<scalar> mags
(
List<scalar>::create
(
pts.begin(),
pts.end(),
[](const vector& v){ return magSqr(v); }
);
- additional rcEdge(), rcEdges() methods for reverse order walk
- accept generic edge() method as alternative to faceEdge() for
single edge retrieval.
- edge() method with points -> returns the vector
- reduce the number of operations in edgeDirection methods
DEFEATURE: remove longestEdge global function
- deprecated and replaced by face::longestEdge() method (2017-04)
Historically the "geometry" for static meshes was placed under
directly in the EnSight case directory.
Eg,
ensight/ensight.case
ensight/geometry
ensight/data/000001
ensight/data/000002 ...
This generally works ok, but relocating it to a constant data directory
Eg
ensight/ensight.case
ensight/data/constant/geometry
ensight/data/000001
ensight/data/000002 ...
Improves handling and avoids potential collisions when adding in
additional mesh regions
- reduces code, simplifies creation of new, specialized polyData
writers.
- new templated vtk::GenericPatchWriter, which adds support for
writing both uindirectPrimitivePatch + indirectPrimitivePatch types.
- handle geometric fields separately from regular fields with
* vtk:GenericPatchGeoFieldsWriter
* vtk:indirectPatchGeoFieldsWriter
* vtk:uindirectPatchGeoFieldsWriter
- can be used for block-like meshes that are not aligned with the global
coordinate directions. Alternatively, for general testing purposes.
Example,
method simple;
coeffs
{
n ( 2 2 2 );
transform
{
origin (-0.15 0.15 0);
e1 (1 1 0);
e3 (0 0 1);
}
}
Step 1.
include "addAllRegionOptions.H"
Adds the -allRegions, -regions and -region options to argList.
Step 2.
include "getAllRegionOptions.H"
Processes the options with -allRegions selecting everything
from the regionProperties.
OR use -regions to specify multiple regions (from
regionProperties), and can also contain regular expressions
OR use the -region option
Specifying a single -regions NAME (not a regular expresssion)
is the same as -region NAME and doesn't use regionProperties
Creates a `wordList regionNames`
Step 3.
Do something with the region names.
Either directly, or quite commonly with the following
include "createNamedMeshes.H"
Creates a `PtrList<fvMesh> meshes`
STYLE: add description to some central include files
- make regionName an optional constructor parameter, which eliminates
a separate set of constructors and construction tables. Adjust
internals to treat a missing/empty regionName as a no-op.
- pass in fallback dictionary content via new IOdictionary constructor
with a pointer
ENH: further relax check for matching number of processor dirs
- if the "numberOfSubdomains" entry is missing (or even zero)
ignore checks of processor dirs as meaningless.
- additional debug information
- improve support for dictionary specification of constant, polynomial
and table entries. These previously only worked properly for
primitiveEntry, which causes confusion.
- extend table Function1 to include TableFile functionality.
Simplifies switching and modifying content.
- additional default construct
- add explicit zero-size constructor for ITstream.
For tagged dispatching, without ambiguity
- elminate mandatory name for parsing versions.
This makes it easier to use ITstream, IStringStream, UListStream
interchangeable.
- some code used copy construct from dictionary::null instead.
The result is the same but suggests that something else may be intended.
Only need dictionary::null for const-ref usage.
- allows use of surface names starting with a digit
(by quoting the name).
User is responsible for not generating bad names for output files.
Eg "bad.**.name", since these will be difficult to handle from the
shell
- largely as per patch from Jong-Gwan (Jason) Do
NB: the intel-one setup adds in paths for intelmpi.
Its mpicc version does not harmonize with the OpenFOAM
system openmpi setup (using mpicc --showme:link).
Needs adjustment, or use intelmpi instead.
- update name mappings for newer gcc, clang versions
Checking for the sum of species mass fraction in multiComponentMixture.
It can't be zero at the internal field or patches. A fatal error is thrown.
A warning was added if the mixture sum is different from one. In a
re-start the mass fraction can be slightly unbounded and new
normalization is required.
- The keyType is primarily used within dictionary reading, whereas
wordRe and wordRes are used for selectors in code.
Unifying on wordRe and wordRes reduces the number matching options.
- additional dummy template parameter to assist with supporting
derived classes. Currently just used for string types, but can be
extended.
- provide hash specialization for various integer types.
Removes the need for any forwarding.
- change default hasher for HashSet/HashTable from 'string::hash'
to `Hash<Key>`. This avoids questionable hashing calls and/or
avoids compiler resolution problems.
For example,
HashSet<label>::hasher and labelHashSet::hasher now both properly
map to Hash<label> whereas previously HashSet<label> would have
persistently mapped to string::hash, which was incorrect.
- standardize internal hashing functors.
Functor name is 'hasher', as per STL set/map and the OpenFOAM
HashSet/HashTable definitions.
Older code had a local templated name, which added unnecessary
clutter and the template parameter was always defaulted.
For example,
Old: `FixedList<label, 3>::Hash<>()`
New: `FixedList<label, 3>::hasher()`
Unchanged: `labelHashSet::hasher()`
Existing `Hash<>` functor namings are still supported,
but deprecated.
- define hasher and Hash specialization for bitSet and PackedList
- add symmetric hasher for 'face'.
Starts with lowest vertex value and walks in the direction
of the next lowest value. This ensures that the hash code is
independent of face orientation and face rotation.
NB:
- some of keys for multiphase handling (eg, phasePairKey)
still use yet another function naming: `hash` and `symmHash`.
This will be targeted for alignment in the future.
- wrap command-line retrieval of fileName with an implicit validate.
Instead of this:
fileName input(args[1]);
fileName other(args["someopt"]);
Now use this:
auto input = args.get<fileName>(1);
auto other = args.get<fileName>("someopt");
which adds a fileName::validate on the inputs
Because of how it is implemented, it will automatically also apply
to argList getOrDefault<fileName>, readIfPresent<fileName> etc.
- adjust fileName::validate and clean to handle backslash conversion.
This makes it easier to ensure that path names arising from MS-Windows
are consistently handled internally.
- dictionarySearch: now check for initial '/' directly instead of
relying on fileName isAbsolute(), which now does more things
BREAKING: remove fileName::clean() const method
- relying on const/non-const to control the behaviour (inplace change
or return a copy) is too fragile and the const version was
almost never used.
Replace:
fileName sanitized = constPath.clean();
With:
fileName sanitized(constPath);
sanitized.clean());
STYLE: test empty() instead of comparing with fileName::null
- simplify compile/uncompile, reading, assignment
- implicit construct wordRe from keyType (was explicit) to simplify
future API changes.
- make Foam::isspace consistent with std::isspace (C-locale)
by including vertical tab and form feed
ENH: improve #ifeq float/label comparisons
- originally had tests for regex meta characters strewn across
regExp classes as well as wordRe, keyType, string.
And had special-purpose quotemeta static function within string
that relied on special naming convention for testing the meta
characters.
The regex meta character testing/handling now relegated entirely
to the regExp class(es).
Relocate quotemeta to stringOps, with a predicate.
- avoid code duplication. Reuse some regExpCxx methods in regExpPosix
It was only looking for faces that were used in both
endpoints but not actually checking whether they were indeed
an edge (== consecutive vertex) in all faces. So if one
face had an additional crossing edge and another didn't it
would find more edgeFaces than the proper
'primitiveMesh::edgeFaces()' routine.
This occasionally happened inside snappyHexMesh
(e.g. motorBike tutorial)
When extruding an edge to a patch face make sure to extrude
all the patch faces connected to that edge and cell. This
will handle cyclicACMI (has duplicate patches - AMI and non-overlap)
fvMesh::readUpdate calls polyMesh::readUpdate which updates
the ACMI (including mesh areas etc). So we should not call
polyMesh::clearOut again inside fvMesh::readUpdate to avoid
having to re-do all the ACMI.
For example,
```
entry #eval 10 { vector(rand(), 0, 0) };
```
ENH: be more generous and ignore trailing ';' in expressions
STYLE: adjust parse token name for tensor::I
- previously had a very old (likely irrelevant) setting for solaris
systems only.
- support site-specific customization.
Eg, using etc/config.{csh,sh}/prefs.fjmpi
- remove erroneous shell redirects present in cshell files
- less important for VTK (may help in future though) but preserve
the face point 0 when flipping faces to ensure that the result
is the same as having called face::reverseFace()
- overCompressibleInterDyMFoam: Overset solver for two compressible,
non-isothermal, immiscible fluids using a VOF (i.e. volume of fluid)
phase-fraction based interface capturing approach.
- overInterPhaseChangeDyMFoam: Overset solver for two incompressible,
isothermal, immiscible fluids with phase-change (e.g. cavitation) using
VoF (i.e. volume of fluid) phase-fraction based interface capturing approach.
- adds new tutorials:
- multiphase/overCompressibleInterDyMFoam/compressibleTwoSimpleRotors
- multiphase/overInterPhaseChangeDyMFoam/twoSimpleRotors
Signed-off-by: Kutalmis Bercin <kutalmis.bercin@esi-group.com>
- useful when used in a batch process to trap the exit signal,
e.g. stop the run when the velocity magnitude exceeds a given
threshold:
runTimeControl
{
type runTimeControl;
libs ("libutilityFunctionObjects.so");
nWriteStep 1;
// Optional end 'action'
satisfiedAction abort; // end; // setTrigger
conditions
{
maxU
{
type minMax;
functionObject MinMax;
fields ("max(mag(U))");
value 1e6;
mode maximum;
}
}
}
- if the system/decomposeParDict is missing, skip check for matching
number of processor dirs. This can make job dispatch easier.
Does not apply if -decomposeParDict was explicitly specified.
STYLE: adjust naming of host/slaves in argList
- ensure that the processor directory cache is consistently available
by providing appropriate synthesized names. If the expected files
really do not exist, it will still fail at a later point (but not in
the caching).
This addresses cases that have been manually distributed
(different content on different nodes, but the same root path),
while still maintaining the readDir on master only for massively
parallel cases (#1946). It also addresses regular cases with
gaps in the processor directories.
- new '-ascii' option to write in ASCII format instead of the
controlDict setting. This can be useful when generating fields that
should be parsed with other tools, or for visual inspection.
- correct mismatch of option names and lookups
- can use either command-line option "-load-fields" or dictionary
entry "readFields" to specify field names to be preloaded.
Essentially the same functionality as with a readFields function
object but with a lot less typing.
- tutorial examples provided by Ryan Danks <ryan.danks@rwdi.com>
illustrate using setExpr* utilities to calculate a quantity
as a post-processing step.
- simplifies local toggling.
- centralize fileModification static variables into IOobject.
They were previously scattered between IOobject and regIOobject
to operate with overset
1) Adding zoneMotion to rigidBodyMotion
2) Introducing PID to prescribedRotation restraint
3) Making drivenLinearMotion read total displacement
4) When drivenLinearMotion is used sixDof and rigid-body solvers
write total displacement
- currently add to mesh zones to provide a table of contents
of the zone names that allows downstream consumers quick access to
the information without needing to parse the entire file.
- support selective enable/disable of the file banner.
ENH: improve code isolation for decomposedBlockData
- use readBlockEntry/writeBlockEntry to encapsulate the IO handling,
which ensures more consistency
- new decomposedBlockData::readHeader for chaining into the
block header information.
- remove unused constructors for decomposedBlockData
ENH: minor cleanup of collated fileOperations
- improves interface and data consistency.
Older signatures are still active (via the Foam_IOstream_extras
define).
- refine internals for IOstreamOption streamFormat, versionNumber
ENH: improve data alignment for IOstream and IOobject
- fit sizeof label/scalar into unsigned char
STYLE: remove dead code
- read/write lists of character data in binary only.
This is the only means of preserving data.
If character data are written as an ASCII list, there is no means of
determining if spaces or newlines are content or separators.
- handle binary/contiguous first as being the most obvious, followed
by increasing complexity of ascii.
Structure reading and writing routines similarly by introducing a
readList method to compliment the writeList method.
- override casename, procesorCase flags to guarantee reconstructed
case to be written to the undecomposed directory
- alternative is to construct a Zero mesh on the undecomposed
runTime and add all other bits to that but that has not been
pursued
- patch point ordering was affected by the EnSight face sorting
(tri, quad, nsided). This did not affect other point fields,
since they use the internal field values.
- for use when the is_contiguous check has already been done outside
the loop. Naming as per std::span.
STYLE: use data/cdata instead of begin
ENH: replace random_shuffle with shuffle, fix OSX int64 ambiguity
- direct check of punctuation.
For example,
while (!tok.isPunctuation(token::BEGIN_LIST)) ..
instead of
while (!(tok.isPunctuation() && tok.pToken() == token::BEGIN_LIST)) ..
Using direct comparison (tok != token::BEGIN_LIST) can be fragile
when comparing int values:
int c = readChar(is);
while (tok != c) .. // Danger, uses LABEL comparison!
- direct check of word.
For example,
if (tok.isWord("uniform")) ..
instead of
if (tok.isWord() && tok.wordToken() == "uniform") ..
- make token lineNumber() a setter method
ENH: adjust internal compound method empty() -> moved()
- support named compound tokens
STYLE: setter method for stream indentation
- pointPatches may or may not have a "value" type.
Use the patch value field where possible and the internal field
otherwise. Previously always used the internal field.
- the raw surface writer simply outputs x/y/z and field values.
This additional flag allows recovery of some geometric information.
- optional user-specified output precision
Example,
```
formatOptions
{
raw
{
normal yes;
precision 10;
}
}
```
- centralises existing functions (erfInv, incGamma*, invIncGamma*).
Provides a location for additional functions in the future.
- adjusted existing models to use these functions
(e.g. distributionModels::normal)
- eliminates a potentially invalid code branch.
Since it essentially had the same internals as std::swap anyhow,
make that more evident.
ENH: use std::swap for basic types
- makes it clearer that they do not rely on any special semantics
- since the wrapped cmake calls generally use the regular build
locations, add in MPI information to properly handle changes
in that as well. This makes it easier to build for multiple MPI
instances.
- ensure surface writing is time-step and nFields aware.
This avoids overwriting (ignoring) previous output fields.
- allow sampled surfaces to be used for weight fields as well.
Not sure why this restriction was still there.
- remove old compatibility reading of orientedFields.
Last used in v1612, now removed.
- only use face sampling. For surfaceFieldValue we can only do
something meaningful with face values.
ENH: modify interface methods for surfaceWriter
- replace direct modification of values with setter methods.
Eg,
old: writer.isPointData() = true;
new: writer.isPointData(true);
This makes it possible to add internal hooks to catch state changes.
ENH: allow post-construction change to sampledSurface interpolation
- rename interpolate() method to isPointData() for consistency with
other classes and to indicate that it is a query.
- additional isPointData(bool) setter method to change the expected
representation type after construction
- remove 'interpolate' restriction on isoSurfacePoint which was
previously flagged as an error but within sampledSurfaces can use
sampleScheme cellPoint and obtain representative samples.
Relax this restriction since this particular iso-surface algorithm
is slated for removal in the foreseeable future.
1) Small modification to the tracking logic for detA zero.
2) Adding small vector displacement to locate function to avoid error where
particle is inserted at the cell centre.
- setup writer outside the data loop to ensure that the number of
output fields is correct (VTK format).
- ignore 'interpolate' on sampled surfaces to ensure proper
face sampling, never allow point sampling
BUG: incorrect debug-switch for sampledIsoSurface
- get: uses access operation to get values for each list item
Example,
PtrListOps::get(mesh.boundaryMesh(), nameOp<polyPatch>());
- names: the name() of each list item filtered for matches
- firstMatching: index of first item with a matching name()
- findMatching: indices of items with a matching match name()
Example,
PtrListOps::findMatching(mesh.boundaryMesh(), wordRes( ... ));
STYLE: deprecate transitional getNameOp, getTypeOp
- use nameOp, typeOp (word.H) instead
If the 'writeFields' option is set in surfaceFieldValue, e.g.
surface1
{
type surfaceFieldValue;
libs (fieldFunctionObjects);
operation none;
fields (p);
regionType patch;
name walls;
// Create a surface in VTK format
writeFields yes;
surfaceFormat vtk;
}
... the surface can now be used in runTimePostProcessing, e.g.:
surfaces
{
surfaceFieldValueOutput
{
type functionObjectSurface;
representation surface;
liveObject no;
field p;
colourBy field;
range (0 120000);
functionObject surface1;
}
}
Note: setting 'liveObject' to 'no' to suppress warnings due to the surface
not being retrieved from the object registry (default = 'yes') - this surface
can [currently] only be read from disk.
- modification/continuation of 8d63073b08 and 5c1ec7ecb8 (#595).
Although this protected function is only used internally, the name
`size(label)` is too easily confused with `resize(label)` and
`setSize(label)`. The longer method name eliminates some ambiguity.
Name consistent with PtrListDetail.
- leave size(label) method (for possible compatibility),
but mark as deprecated
- improve sizing consistency for (Istream >> DynamicList)
STYLE: more consistent use of resize vs setSize in DynamicList
- more consistency between DynamicList and DynamicField.
There were some inconsistencies in how construct with a size was
interpreted.
STYLE: more consistent declaration/use of Swap
- this was previously suppressed for ASCII format as being 'clutter',
but without it there is no context for interpreting the type of data
contained in ASCII files: potentially leading to integer overflows
when reading in ParaView etc.
dynamicRefineFvMesh optionally can map fluxes derived from velocities
fields specified in dynamicMeshDict. The surface interpolation was
using old weights. This fix clear the old weights before mapping
the fluxes
The polyMesh construct-from-components will now ignore
the readOpt for the supplied primitives as before.
This again re-allows READ_IF_PRESENT for fv* in
combination with supplied primitives.
This makes the initialisation order of dynamicMesh consistent
with plain ones using the virtual mechanism. It does not
solve the cyclicACMI construction order yet.
Changed IO flag so that new mesh is created
- was using old 'faces', 'owner' etc but then used the new patch starts
Corrected logic for contMap in polyTopoChange
walls
A new user input parameter UrMax is added to the PatchInteractionModel.
In some occasions the partile remains on a patch face due to extremely
low relative U. If this Ur is lower than UrMax the particle is removed
- replaces previous code that used an autoPtr to hold a singleton.
In some circumstances this deletion would conflict with clearing
the objectRegistry - leading to error messages on exit.
Now store directly on the registry (similar to a MeshObject)
- previously hard-coded, now adjustable within PDRsetFieldsDict
// Change some predefined patch names
patchNames
{
ground ground;
outer outer;
}
ENH: additions to PDRutils, improve comments
- expose enumerated expansion names and gridControl (PDRblock).
Not commonly needed, but useful to have access when defining
other grid generators
TUT: update PDRsetFieldsDict and tutorials to use "ground"
- remove tutorial references to unused types and legacy obstacles
- use "ground" for the boundary conditions instead of "seaGround".
Consistent with PDRblockMesh
The new functionality optionally allows the patch-averaged
value to be scaled and/or offset by a pair of specified values.
Example of the boundary condition specification:
```
<patchName>
{
// Mandatory entries (unmodifiable)
type outletMappedFilterInlet;
outletPatch <outletPatchName>;
// Optional entries (unmodifiable)
fraction 0.1;
offset 10; // (1 0 0);
phi phi;
// Optional (inherited) entries
...
}
```
1) PhaseIncompressibleTurbulenceModel class was changed to use
uniform alpha and non-uniform rho templates. This fits the need
of incompressible two phase turbulence models.
2) A new type DPMIncompressibleTurbulenceModel was created for
non-uniform alpha and uniform rho. It is used in single phase flows
in DPM solvers where alpha represents the volumen occupancy.
3) A new type incompressibleRhoTurbulenceModel was created where
non-uniform rho is allowed.
4) A new base templated turbulent class for two-phase VOF named
VoFphaseTurbulentTransportModel was implemented which is created
templating on PhaseIncompressibleTurbulenceModel and
incompressibleRhoTurbulenceModel
5) In order to make the chnage to rho based VOF turbulence a help
class was added incompressibleInterPhaseTransportModel templated
on the mixing.
In reconstruct mode redistributePar will have
- master read undecomposed mesh
- slaves construct dummy mesh (0 faces/points etc.)
but correct patches and zones
so all processors have two valid meshes. This was
all handled inside fvMeshTools::newMesh and this
was behaving differently.
Function1 wrapper that limits the input range of another Function1
Example usage for limiting a polynomial:
limitedPolyTest limitRange;
limitedPolyTestCoeffs
{
min 0.4;
max 1.4;
value polynomial
(
(5 1)
(-2 2)
(-2 3)
(1 4)
);
}
Here the return value will be:
- poly(0.4) for x <= 0.4;
- poly(1.4) for x >= 1.4; and
- poly(x) for 0.4 < x < 1.4.
- previously always called dlclose on opened libraries when destroying
the dlLibraryTable. However, by force closing the libraries the
situation can arise that the library is missing its own code that it
needs on unload (#1524). This is also sometimes evident when closing
VTK libraries for runTimePostProcessing (#354, #1585).
- The new default is to not forcibly dlclose any libraries, unless
the dlcloseOnTerminate OptimisationSwitch specifies otherwise.
- The dlLibraryTable::close() method can be used to explicitly close
all libraries and clear the list.
- The dlLibraryTable::clear() method now only clears the entries,
without a dlclose.
Failures shown in interFoam cases were found to be a result of stale ldu
addressing in fvMesh. Potentially delete lduPtr_ alone, but likely safer to
clear all addressing:
// deleteDemandDrivenData(lduPtr_);
clearAddressing(true);
The FO BilgerMixtureFraction needs access to specieComposition which is
stored in ReactingMixture. A virtual mechanism was added to
basicSpecieMixture to access specieComposition form rho and psi
reationThermos.
ptr was changed to autoPtr to avoid memory leaks (Kutalmis Bercin)
Multiplies a given list of (at least two or more) fields and outputs the
result into a new field.
fieldResult = field1 * field2 * ... * fieldN
Minimal example by using \c system/controlDict.functions:
multiply1
{
// Mandatory entries (unmodifiable)
type multiply;
libs (fieldFunctionObjects);
// Mandatory (inherited) entry (runtime modifiable)
fields (<field1> <field2> ... <fieldN>);
...
}
- now also tracks the previous output time, which aids on restarts
since it allows the FEA side the possibility of determining
the effective deltaT between the output of forces
COMP: fix SP/DP inconsistency in fvGeometryScheme
STYLE: rename polyMesh::updateGeom to polyMesh::updateGeomPoints
- avoids compiler complaints and potential masking of
primitiveMesh::updateGeom / fvMesh::updateGeom
- mark argument as movable, since that is what is happening inside.
GIT: remove merge cruft
TUT: better clean on MPPICInterFoam
The SPL can now be weighted according to the new 'SPLweighting' entry
that can be set to:
- none: no weighting
- dBA : dB(A)
- dBB : dB(B)
- dBC : dB(C)
- dBD : dB(D)
This commit also includes code refactoring of the noiseModel class to
remove the dependency on noiseFFT/declutter.
fvOptionsAdjoint was needlessly duplicating a lot of the functionality
of fvOptions in order to add an interface for computing sensitivity
contributions emerging from fvOptions. To reduce this code duplication:
- fvOptionsAdjoint was removed
- the corresponding sensitivity contributions have moved to fvOptions through
virtual functions (returning a zero contribution in the base so
backwards compatibility is retained)
- all sensitivity classes that were using fvOptionsAdjoint have been
modified appropriately
- all adjoint solvers are now grabbing a reference to an fvOptionList
from the database instead of constructing an fvOptionsAdjointList
Hence, all fvOptions contributions to the adjoint equations
or the sensitivity derivatives can be given through system/fvOptions,
removing the need for separate sub-dictionaries within optimisationDict.
- Expanded the write function in the base class so that it can manage
input coming from the derived ones. This reduces a lot of code
duplication in the latter but keeps the functionality.
- Added a default width for all entries in the objective files.
- If a normalisation factor or a target is set, they are written on the
header of the objective file.
- Cosmetic/code consistency changes in various files.
- Added preLoop, loop and postLoop functions
- Added preIter, mainIter and postIter functions for each SIMPLE
iteration
- Added addMomentumSource and addPressureSource virtual functions, to
allow for additions by derived classes
fvOptions are no longer a member of incompressiblePrimalSolver but are
looked up from the registry in each iteration of each primal solver.
This means that the main system/fvOptions dictionary is read by ALL
instances of the primal solvers and the latter no longer have their
own fvOptions dict in optimisationDict. This is safe since each fvOption
is applied to a specific field and in case of many primal solvers, the
primal fields are named differently for each of them.
In addition, simple is now split in preLoop, loop and postLoop phase.
Furthermore, each SIMPLE iteration is broken down to
a preIter, mainIter and postIter phase, to allow for different behaviour
by derived classes.
Part of the (E)SI shape sensitivities depends of grad(Ua) & nf computed
on the boundary. Up to now, the code was only computing the normal part
of grad(Ua), to avoid the potentially spurious tangential component
which is computed on the cell center and extrapolated to the boundary
faces. However, for some objectives that are strongly related to the
stresses (e.g. moment, stresses), including also the tangential part of
grad(Ua) is necessary for E-SI to replicate the outcome of FI.
Extensive testing on a number of objectives/cases showed
- No regression when including the tangential part
- Improved behaviour in some rare cases (moment, stresses)
Hence, the tangential part is now included by default. The previous code
behaviour can be replicated by setting the useSnGradInTranposeStresses
flag to true.
- controlPointsDefinition is now controled by a class with
runTimeSelection.
- Added a new controlPointsDefinition option that translates, rotates
and scales a given box. The required entries have the same meaning as
in the Paraview 'Transform' filter, facilitating the transition between the
visual placement of control boxes (e.g. in Paraview) and their setup
in the code.
- Improved performance during the parameterization, sensitivity
computation and grid displacement phases by re-using already computed
basis functions.
- adds topology-based segmentation of the surfaces generated with
distance surfaces. This can occur when the surface terminates
close to a thin wall gap in the mesh; resulting in a cuts that
extend into the next region.
The cutting algorithm does not normally distinguish between these
types of "ragged" cuts, and legitimate ones (eg, cutting multiple
pipes). The additional segmentation controls provide for two common
scenarios:
largestRegion (pre-filter):
- The cut cells are checked for topological connectivity and the
region with the most number of cut cells is retained.
This handles the "ragged" edge problem.
nearestPoints (pre-filter):
- The cut cells split into regions, the regions closest to the
user-defined points are retained.
Uses maxDistance for additional control.
proximity (post-filter):
- Checks the resulting faces against the original search surface
and rejects faces with a distance greater than absProximity.
ENH: restructure distance surface geometric filtering
- prefilter cells, which can be used to adjust the distance
calculation in the far field to the real distance
(not the normal distance).
This can also be used to artificially sharpen the transition
between near/far regions, if required in the future.
- generic isoSurfaceBase. Provides simpler cell-cut detection and
various functions that can be used for iso-surfaces or when
preparing prefiltered input for iso-surfaces.
- rudimentary runtime selection
ENH: isoSurface Cell/Topo uses the isoSurfaceBase infrastructure
- simpler cell cut detection, common routines
- ensure that tetMatcher is only called once per cell
ENH: use indirect patch during edge erosion
- lower overhead, allows backtracking (future) if needed
This adds a 'geometry' scheme section to the system/fvSchemes:
geometry
{
type highAspectRatio;
}
These 'fvGeometryMethod's are used to calculate
- deltaCoeffs
- nonOrthoCoeffs
etc and can even modify the basic face/cellCentres calculation.
Creates volume fields whose boundaries are used to store patch interaction
statistics.
Current field output per patch face:
- \<cloud\>\<model\>:count - cumulative particle hits
- \<cloud\>\<model\>:mass - cumuluative mass of hitting particles
Fields can be reset according to:
- none: fields are not reset
- timeStep: reset at each time step
- writeTime: reset at each write time
Usage
patchInteractionFields1
{
type patchInteractionFields;
resetMode writeTime;
}
Member function dKcdTbyKc in thermo.H is calculated from S and G at Pstd.
Thus dGdT was removed from the thermos.
- Add optional hRef, eRef and Tref as optional.
- Use new thermo to multiphase solver icoReactingMuliPhaseFoam
- Remove hRefConst and eRefConst thermos.
TUT: Updated tutorials
The generalizedNewtonian viscocity models were ported from
the org version and added to the laminar turbulence framework.
This allows use in compressible and incompressible solvers
through the turbulence dictionary under the laminar sub-dictionary.
The thermal laminar viscosity is taken from the thermo for solvers
that use thermo library or from the transportProperties dictionary
for incompressible solvers.
At the moment the option to include viscocity models through the
transportDict is still available.
The icoTabulated equation of state was ported from the org version.
STYLE: use 'model' instead of 'laminarModel' in tutorials
- New solver: `acousticFoam`
- New base finite-area region class: `regionFaModel`
- New base shell model classes:
- `vibrationShellModel`
- `thermalShellModel`
- New shell models:
- A vibration-shell model: `KirchhoffShell`
- A thermal-shell model: `thermalShell`
- New finite-area/finite-volume boundary conditions:
- `clampedPlate`
- `timeVaryingFixedValue`
- `acousticWaveTransmissive`
- New base classes for `fvOption` of finite-area methods: `faOption`
- New `faOption`s:
- `contactHeatFluxSource`
- `externalFileSource`
- `externalHeatFluxSource`
- `jouleHeatingSource`
- New tutorial: `compressible/acousticFoam/obliqueAirJet`
Signed-off-by: Kutalmis Bercin <kutalmis.bercin@esi-group.com>
- implicitly enabled when timeStampMaster (default) is used
for the fileModificationChecking
- When running with non-distributed roots (eg, NFS-share) read for
processor directories on master only and send to sub-processes
instead individual reads.
- If disabled (old default, or when running with distributed roots),
uses the regular fileHandler readDir, which may perform readDir
on each processor. Potentially slow startup times on large systems.
Improvements based on analysis from T.Aoyagi(RIST), A.Azami(RIST)
Applies sources on turbulent kinetic energy (i.e. `k`)
and either turbulent kinetic energy dissipation rate (i.e. `epsilon`)
or specific dissipation rate (i.e. `omega`) to incorporate effects
of buoyancy on turbulence in incompressible and compressible flows.
See buoyancyTurbSource.H for details.
- was previously via inheritance, but using member data instead
supports a more flexible internal switching of the storage. It also
ensures that data access remains safe, even in the absence of
an isoSurface.
- better alignment of sampling Cell/Point/Topo inputs
- make exposedPatchName optional for isoSurface, cuttingPlane. This
was a holdover requirement from an older version of fvMeshSubset
- yields cleaner surfaces with few cuts.
Can use isoMethod keyword to select cell/point/topo if they prove
better for any particular case.
CONFIG: change default cuttingPlane algorithm from 'cell' to 'topo'
- bundles selection and control parameters used when creating
iso-surfaces. This simplifies selection and specification
- drop old compatibility handling of "cell" as a bool
- harmonize filter/regularisation flags for iso-surface
- for dictionary input, accept "isoMethod" and "isoAlgorithm" as being
synonymous. Using "isoMethod" is less subject to typing errors.
- for boundary meshes, zones etc. The behaviour with an empty matcher
was either not properly documented, and looped through all
names just to establish there was no match.
STYLE: removed redundant typedefs for point fields
- robuster matching behaviour when encountering paths that themselves
contain the word "processor" in them. For example,
"/path/processor0generation2/case1/processor10/system"
will now correctly match on processor10 instead of failing.
- use procRangeType for encapsulating the processor ranges
- provision for information of distributed vs non-distributed roots.
The information is currently available from the initial setup, but
can useful to access directly within fileOperation.
STYLE: modernize list iteration
- the NullObject singleton can also be cast to a bitSet
(sufficient size and bit-pattern). Useful for places that
need to hold a reference on construction
- (tet, pyr, hex) can be identified from their number of faces
and vertices. For these common shapes can use static `test()`
method instead of the virtual isA() method.
This is much cheaper for calling on an individual basis since
it avoids the overhead of constructing an object.
ENH: tetCell edge/reverseEdge (already had tetEdge)
- avoid potential future mistakes if someone adds a sizing dimension
and finds they have inadvertently called construct labelList with
`{std::initializer_list<label>}` instead of `label`
Shows an example of the new recyclePatchInteraction model
- particles that escape from the outlet are recycled back into the
domain via the second inlet
Signed-off-by: Kutalmis Bercin <kutalmis.bercin@esi-group.com>
Parcels that hit an 'outflow' patch are recycled to an 'inflow' patch, with
optional:
- recycle fraction < 1
Example usage:
RecycleInteractionCoeffs
{
recyclePatches
(
(outlet1 inlet1)
(outlet2 inlet2)
);
recycleFraction 0.8; // [0-1]
}
Signed-off-by: Kutalmis Bercin <kutalmis.bercin@esi-group.com>
- weight fields are combined by multiplication
- volFieldValue:
* 0-N scalar fields
- surfaceFieldValue:
* 0-N scalar fields
* 0-1 vector fields
In some cases this can be used to avoid creating additional
fields.
weightFields (rho U);
vs.
derivedFields (rhoU);
weightField rhoU;
- when sampling onto a meshed surface, the sampling surface may be
outside of the mesh region, or simply too far away to be considered
reasonable.
Can now specify a max search distance and default values for samples
that are too distant.
If a default value is not specified, uses Type(Zero).
Eg,
maxDistance 0.005;
defaultValue
{
"p.*" 1e5;
T 273.15;
U (-100 -100 -100);
}
- additional "names" entry to specify a word/regex list of selections
For example,
{
type patch;
name inlets;
names ("inlet_[0-9].*" inlet);
}
- if "names" exists AND contains a literal (non-regex) that can be used
as a suitable value for "name", the "name" entry becomes optional.
For example,
{
type patch;
names ("inlet_[0-9].*" inlet);
// inferred name = inlet
}
- reduce some overhead in surfaceFieldValue
TUT: surfaceFieldValue on patches : reactingParcelFoam/verticalChannel
- read surfaces which are defined in terms of solid element sides. Eg,
```
*ELEMENT, TYPE=C3D4, ELSET=...
1, ...
2, ...
*SURFACE, NAME=Things, TYPE=ELEMENT
1, S1
2, S1
```
The element and side number are encoded as a synthetic face id
according to
-(10 * elemId + sideNum)
but the underlying solid geometry is discarded, since there is no
reasonable way to pass it through the surface sampling mechanism.
- bitSet and PackedList fill() as per boost dynamic_bitset.
Silently deprecate assign(val), which is potentially confusing
with other forms of assign().
- FixedList fill() as per std::array.
Add missing assignment from Foam::zero
- minor code simplication in bitSet and PackedList
STYLE: fix typo in comment, qualify Foam::zero
Example usage,
wmake -with-bear src/OpenFOAM
src/Allwmake -with-bear -s -j
- bin/tools/vscode-settings
Emit some json content suitable for setting up Visual Studio Code
for use with OpenFOAM.
For example,
bin/tools/vscode-settings > .vscode/settings.json
Ideas from Volker Weissman
----
install-dirs: a general directory installer
Copy installs non-binary (platform) directories.
Eg,
install-dirs -prefix=... -devel
install-dirs -prefix=... -default -no-app
----
install-platform: a platform (binary) installer
This is primarily driven by the need to install into system mpi
directories. The problem noted in issue #1893 is caused by the
rpm-mpi-hooks (fedora and redhat-8).
For the additional mpi library qualifier (openmpi-x86_64) to be
added to the requirements, the mpi-specific libraries (eg,
libPstream.so) need to be installed in the mpi system directory
(eg, /usr/lib64/openmpi).
However, then need symlinks from the system locations back to our
local directories to ensure that the libraries are correctly found
via our LD_LIBRARY_PATH and we don't get dummy libraries.
----
update-mpi-links: a post-install update hook
Expected paths are registered as persistent information into the
hook during packaging. Triggering the hook after installation
completes the creation of the symlinks.
Normal usage,
```
prefix="/tmp/local-install/openfoam"
bin/tools/install-dirs -prefix="$prefix" -common
bin/tools/install-platform -prefix="$prefix"
```
Installs
- /tmp/local-install/openfoam/META-INFO
- /tmp/local-install/openfoam/bin
- /tmp/local-install/openfoam/etc
- /tmp/local-install/openfoam/platforms/linux64GccDPInt32Opt/bin
- /tmp/local-install/openfoam/platforms/linux64GccDPInt32Opt/lib
Can also place architecture-dependent bits elsewhere,
```
prefix="/tmp/local-install/openfoam"
multi_arch="$(dpkg-architecture -qDEB_TARGET_MULTIARCH)"
bin/tools/install-dirs -prefix="$prefix" -common
bin/tools/install-platform -exec-prefix="$prefix/$multi_arch"
```
Installs
- /tmp/local-install/openfoam/META-INFO
- /tmp/local-install/openfoam/bin
- /tmp/local-install/openfoam/etc
- /tmp/local-install/openfoam/x86_64-linux-gnu/bin
- /tmp/local-install/openfoam/x86_64-linux-gnu/lib
Can use it to flatten out platforms entirely,
```
prefix="/tmp/local-install/openfoam"
bin/tools/install-dirs -prefix="$prefix" -common
bin/tools/install-platform -exec-prefix="$prefix"
```
Installs
- /tmp/local-install/openfoam/META-INFO
- /tmp/local-install/openfoam/bin
- /tmp/local-install/openfoam/etc
- /tmp/local-install/openfoam/lib
- findZone(), cfindZone() to return pointer to existing or nullptr if
not found. This fits with methods such as findObject() etc for other
classes and can simplify code without checks for '-1' as not found.
- use simpler constructors for empty cell/face/point zones
- change to a templated implementation instead of relying on
the container's writeList() method.
This inlines the generation while also adding the flexibility to
define different delimiters (at compile time) without the
performance penalty of passing run-time parameters.
- deprecate get(key, deflt) in favour of lookup(key, deflt).
Method name compatibility with HashTable.
- deprecate operator().
The meaning is too opaque and equally served by other means:
- use get(key) instead of operator()(key).
Const access whereas HashTable::operator()(key)
creates missing entry.
- lookup(key, deflt) - instead of operator()(key, deflt).
Const access whereas HashTable::operator()(key, deflt)
creates a missing entry.
- make Enum iterable to allow participation in range-for etc.
- non-uniform offsets are generated due to truncation errors,
which can lead to problems later on (e.g. redistributePar).
Detect if the offsets are close to being uniform.
This also is to do with redistributePar:
this uses subsetMesh to generate parts to
send to different processors.
2) related to 1558: make sure not to choose 'mapped'
patches to move the processor patches into so
we can use the mapper cloning and correctly
size additional data (e.g. offsets). This should
be generalised to hold for any patch type
holding local data ...
- For slow oscillations it can be more intuitive to specify the
period.
ENH: separate mark/space for Square
- makes it easier to tailor the desired intervals.
BUG: incorrect square wave fraction with negative phase shifts
ENH: additional cosine Function1
STYLE: avoid code duplication by inheriting Cosine/Square from Sine.
- deprecated Feb-2018, but not marked as such.
The set() method originally enforce an additional run-time check
(Fatal if pointer was already set), but this was rarely used.
In fact, the set() method was invariably used in constructors
where the pointer by definition was unset.
Can now mark as deprecated to catch the last of these.
We prefer reset() for similarity with std::unique_ptr
Eg,
FOAM_EXTRA_CXXFLAGS="-DFoam_autoPtr_deprecate_setMethod" wmake
- easier support for non-mandatory functions.
In some boundary conditions it can be desirable to support
additional functions, but not necessarily require them. Make this
easier to support with a Function1, PatchFunction1 NewIfPresent()
selector.
- support for compatibility lookups
- harmonize branching logic and error handling between Function1 and
PatchFunction1.
ENH: refactor a base class for Function1, PatchFunction1
- includes base characteristics, patch or scalar information
ENH: additional creation macros
- makeConcreteFunction1, makeConcretePatchFunction1Type for adding a
non-templated function into the correct templated selection table.
makeScalarPatchFunction1 for similarity with makeScalarFunction1
ENH: support construction of zero-sized IndirectList
- useful when addressing is to be generated in-place after construction.
Eg,
indirectPrimitivePatch myPatches
(
IndirectList<face>(mesh.faces(), Zero),
mesh.points()
);
labelList& patchFaces = myPatches.addressing();
patchFaces.resize(...);
// populate patchFaces
STYLE: add noexcept for zero/one fields and remove old dependency files
COMP: correct typedefs for geometricOneField, geometricZeroField
- uses ocountstream for the output, which swallows all output.
Improves portability
ENH: improved efficiency in countstreambuf
- xsputn() instead of overflow
- more consistent seek* methods
Computes a histogram for the distribution of particle diameters
and corresponding number of particles hitting on a given list of patches.
A minimal example by using `constant/reactingCloud1Properties.cloudFunctions`:
```
patchParticleHistogram1
{
// Mandatory entries (unmodifiable)
type patchParticleHistogram;
patches (<patch1> <patch2> ... <patchN>);
nBins 10;
min 0.1;
max 10.0;
maxStoredParcels 20;
}
```
DOC: heatTransferCoeff models: complete remaining header docs
STYLE: heatTransferCoeff models: use auto specifier when appropriate
Optionally, the Nusselt number (i.e. the ratio of convective to conductive
heat transfer at a boundary in a fluid) can be output:
```math
Nu = \frac{h L}{\kappa}
```
where
```
Nu | Nusselt number
h | Convective heat transfer coefficient of the flow
L | Characteristic length that defines the scale of the physical system
\kappa | Thermal conductivity of the fluid
```
It was observed in a MPPICDyMFoam simulation involving a single particle
in a moving mesh that the barocentric trajectory of the particle follows
an unexpected path at some arbitrary instant in time.
The issue was tracked to "hitEqn()" where cubicEqn/quadraticEqn computes
one of the roots wrongly due to the discriminant limit we set, e.g. for:
0x^3 + 1.4334549e-33 x^2 - 9.0869006e-10 x + 0.0027666538
Although the discriminant limit was carefully selected to avoid various
problems at the time, the new change is required more due to its exposition
to a wider spectrum of applications.
From OpenFOAM Foundation e4d89daf5d
The main issue here was that reconstructPar is serial but coupled() in
cyclicAMIFvPatch.C could return true if both sides of the patch was present
(this->size() && neighbFvPatch().size()). However, this would result in an
evaluate call in cyclicAMIFvPatchField. This would only work if both sides
were completely contained on the same processor. The change in logic prevents
coupled() from returning true when called in serial for a decomposed case.
Signed-off-by: Kutalmis Bercin <kutalmis.bercin@esi-group.com>
- prefix FOAM_MPI and library directories with 'sys-' for system
versions for uniform identication.
WM_MPLIB | libdir (FOAM_MPI) | old naming |
SYSTEMMPI | sys-mpi | mpi |
SYSTEMOPENMPI | sys-openmpi | openmpi-system |
- prefix preferences with 'prefs.' to make them more easily
identifiable, and update bin/tools/create-mpi-config accordingly
Old name: config.{csh,sh}/openmpi
New name: config.{csh,sh}/prefs.openmpi
- additional mpi preferences now available:
* prefs.intelmpi
* prefs.mpich
...
CONFIG: added hook for EASYBUILDMPI (eb-mpi), somewhat like USERMPI
- EasyBuild uses mpicc when compiling, so no explicit wmake rules are
used
ENH: support different major versions for system openmpi
- for example, with
WM_MPLIB=SYSTEMOPENMPI2
defines FOAM_MPI=sys-openmpi2 and thus creates lib/sys-openmpi2
ENH: centralize handling of mpi as 'mpi-rules'
Before:
sinclude $(GENERAL_RULES)/mplib$(WM_MPLIB)
sinclude $(DEFAULT_RULES)/mplib$(WM_MPLIB)
ifeq (,$(FOAM_MPI_LIBBIN))
FOAM_MPI_LIBBIN := $(FOAM_LIBBIN)/$(FOAM_MPI)
endif
After:
include $(GENERAL_RULES)/mpi-rules
- also allows variants such as SYSTEMOPENMPI2 to be handled separately
ENH: provide fallback prefix for cmake detection
STYLE: simplify some shell syntax, avoid uname call in sysFunctions
STYLE: report FOAM_MPI during mpiLib builds
- ensures that subsequent Allwmake scripts know about it.
ENH: add bin/tools/query-detect wrapper for wmake have_* scripts
CONFIG: use project/ThirdParty without additional sanity checks
- no need to test for Allwmake or platforms/ if ThirdParty is located
within the project directory itself.
COMP: add simple mpi test to 00-dummy
- for testing library linkage, etc.
- blockMesh <- extrudeModel <- dynamicMesh
COMP: bad constructor in searchableSphere
- used brace initializer instead of bracket initializer, which
triggered component-wise construction instead of copy/move
construction (gcc 4.8)
STYLE: use uint8_t instead of relying on definition of 'direction'
- first sort the cells into their ijk bins, and restrict testing for
face orientation to those faces with an owner or neighbour that has
an ijk bin.
ENH: ensure polyMesh from PDRblockMesh is marked as AUTO_WRITE
- the particular polyMesh constructor inherits the writeOpt, which
makes is dependent on the caller and thus somewhat fragile for the
top level caller.
- a sphere/spheroid can be specified as a single radius or three radii.
If all three values happen to be identical, they are collapsed to a
single value. Examples,
radius 2;
radius (2 2 2);
radius (2 3 4);
radius (2 2 4);
The search for nearest point on an ellipse or ellipsoid follows the
description given by Geometric Tools (David Eberly), which also
include some pseudo code. The content is CC-BY 4.0
In the search algorithm, symmetry is exploited and the searching is
confined to the first (+x,+y,+z) octant, and the radii are ordered
from largest to smallest.
Searching is optimized for sphere, prolate and oblate spheroids.
- code reduction, documentation, code stubs for spheroid (#1901)
- make searchableSurfaceCollection available as 'collection'
for consistency with other objects
- make handling of verbosity more consistent.
Make all setter return the old value, remove (unused) default
parameter as being counter-intuitive. This makes it easier to
restore the original values.
For example,
const bool oldVerbose = sampler.verbose(false);
...
sampler.verbose(oldVerbose);
- can help when designing/debugging blockMesh layouts
- propagate low-level cellModel methods face() and edge() to cellShape
STYLE: relocate blockMesh OBJ output to application only
- remove blockTopology files in cleanCase function
- improve code consistency in top-level blockMesh, PDRblockMesh
generation.
- consistent with FOAM_SIGFPE etc.
- centralize code as error::useAbort() static function to avoid
scattering the logic throughout the code.
ENH: also accept "0" and "1" string values for Switch
- not the normal path for Switch input (eg, from a dictionary), but
consistent with bool definitions and simplifies string parsing.
This means that `FOAM_SIGFPE=1 application` will now also work.
- use refPtr to simplify some logic.
- avoid copying field if an average will be used
- initialize geometric fields with a uniform value instead of Zero
- minor tweak of method names
- apply bugfix #1889 (longer description elsewhere)
- add -recentre option to shift points according to the bounding box
centre before performing other operations
- add -auto-origin to use the bounding box centre as the origin for
rotations. Has lower priority than the -origin option.
- surfaceTransformPoints now has distinct -read-scale, -write-scale
options (as per surfaceMeshConvert). Silently accepts -scale as
equivalent to -write-scale, for backwards compatibility and
similarity with transformPoints
- add -steps option for surfaceRefineRedGreen for successive
refinement
Allows specification of extrusion path using blockMesh 'edges' syntax.
See tutorials/mesh/extrudeMesh/polyline
Contribution by Ivor Clifford/Paul Scherrer Institut
ENH: add some scalar constants for .org compatibility (#1881)
Although it can very much be a moving target, it can prove partly
useful to have some compatibility constants/methods.
- The wholesale change of 'GREAT' -> 'great' etc (JAN-2018), makes
user coding for multiple versions problematic. When
COMPAT_OPENFOAM_ORG is defined, now define constants (aliases) named
as per the openfoam.org version. Values, however, remain identical.
- For type-safe dictionary value retrieval, we have the templated
get<> methods added around NOV-2018 and deprecated the lookupType
method.
The .org version followed suit in NOV-2019, but opted for renaming
the templated lookupType method as a templated 'lookup' method.
Using this is discouraged, but allowed when COMPAT_OPENFOAM_ORG is
defined.
- flips state while preserving the textual representation.
Eg, OFF <-> ON, YES <-> NO etc.
- fix test case to avoid triggering abort(), which we cannot try/catch
- provides a more direct means of generating a compound token without
an Istream
- add transferCompoundToken() without Istream reference
- mark more token methods as noexcept
- was marked as transitional/deprecated (2018-02), now deleted.
- avoids unexpected stealing of the pointer.
Use the move assignment it that is the intention.
- support construct face from subset of labels.
- additional cellModel face() method to return a single face.
- reduce some allocations in cellModel centre/mag methods
STYLE: mark old cellModeller methods as compile-time deprecated
- deprecated in 2017, but not marked as such
STYLE: indentation, spacing in some headers
- in most cases this eliminates manually calculation of circumferential
points.
TUT: improve parameterization of sphere blockMeshDict
- allow separate parameterization of radius, ratio of inner to outer,
and the number of divisions in x/y/z and radial directions
- The arc will frequently enclose an angle less than 180 degrees.
For the case, it is possible to define the arc by its endpoints
and its centre (origin) point. For example,
arc 0 1 origin (0 0 0);
When defined in the way, any discrepancy in the arc radius for the
endpoints is resolved by adjusting the origin to ensure that the
average radius is satisfied.
It is also possible to specify a \em flatness factor as a multiplier
of the radius. For example,
arc 0 1 origin 1.1 (0 0 0);
ENH: minor code cleanup for block edges
ENH: expose point appending as polyList::concat
- contents to be filled with a later assignment.
This can help avoid deduction issues when populating from a list of
tokens, and the templated version is selected:
```
template<class T>
primitiveEntry(const keyType&, const T&);
```
ENH: support construct empty ITstream with given name
- populate contents later by assigment
- provides consistency with identity(label, label) and looks more
familiar than using labelRange::labels()
- relocates labelRange IO operators to IntRange
ENH: make sliceRange interators random access
STYLE: scalarRanges::match() instead of predicate operator
- returns a range of `int` values that can be iterated across.
For example,
for (const int proci : Pstream::subProcs()) { ... }
instead of
for
(
int proci = Pstream::firstSlave();
proci <= Pstream::lastSlave();
++proci
)
{
...
}
- returns a range of `int` values that can be iterated across.
For example,
for (const int proci : Pstream::allProcs()) { ... }
instead of
for (label proci = 0; proci < Pstream::nProcs(); ++proci) { ... }
- timeVaryingUniformFixedValue -> uniformFixedValue
- allows a variety of functions (eg, coded, expressions, tables, ...)
- more similarity to finiteVolume patch type
STYLE: remove unused timeVarying... from etc/controlDict
- add reverse iterators and replace std::iterator
(deprecated in C++17) with full definitions
- simplify construction of iterators
- construct labelRange from a single single parameter.
This creates a (0,len) range.
- make basic constructors forms constexpr.
Remove unused size checks.
- Derive labelRange from new IntRange template class.
Allows reuse of base functionality with different integral sizes.
Deprecations:
- deprecate labelRange::valid() in favour of using
labelRange::empty() or the bool operator.
For example,
if (range) ... vs older if (range.valid()) ...
DEFEATURE: drop labelRange::null, scalarRange::null static variables
- turned out to be not particularly useful.
Can simply use constexpr contructor forms
DEFEATURE: drop labelRange::identity static method
- simply use the single-parameter constructor
1) Adding LiquidEvapFuchsKnudsen model for lagrangian evaporation.
This models is based on a diffusion type of evaporation/
condensation on particles composed of solution (liquid + solid).
2) Adding modes of calculating the particle rho and volume change.
The new keyword in constantProperties is 'volumeUpdateMethod'
which three options:
a) constantRho
b) constantVolume
c) updateRhoAndVol
The old keyword 'constantVolume' true/face is still valid
3) The entry rho0 is now optional for multicomponent parcels.
If defined , it is used, but if it is not the actual mixture
provided is used to calculate rho0 of the particle.
T0 is still used as initial T and Cp0 is over-written in the
multicomponent cloud but still required.
4) Adding tutorial for evaporation/condensation model
BUG: faMatrix::residual changes source vector (fixes#1835)
ENH: improve code alignment between faMatrix and fvMatrix
- support setValues() with a single value
- can use ListOps::appendEqOp as the more general form.
Note that this uses a different template parameter.
Eg,
`globalMeshData::ListPlusEqOp<labelList>()`
vs. `ListOps::appendEqOp<label>()`
- select default nastran PLOAD2 or PLOAD4 based on field type.
Default to PLOAD2 for scalar types and PLOAD4 for vectors etc.
- relocate nastran SHELL/MAT cards.
Previously wrote at the end of the file, now emit when writing the
geometry itself. This improves modularity (of code and files)
- initial support for common geometry file for nastran
- for CAE formats such as abaqus, nastran, starcd, etc, the element id
is already part of the output format itself. For these cases, there
is no use in generating an additional "Ids" field.
ENH: add code to ignore negative face ids
- these will arise from very special cases, such as when a
solid element and side are encoded into a single integer.
BUG: starcd surface values output did not use original face ids
- introduce WM_COMPILE_CONTROL variable to convey control information
into the build rules.
The convention (as per spack):
- '+' to select a feature
- '~' to deselect a feature
Eg, to select the gold linker, and disable openmp
(spaces are not required):
WM_COMPILE_CONTROL="+gold ~openmp"
CONFIG: accept FOAM_EXTRA_LDFLAGS for AMD, gold, Mingw linkers
CONFIG: generalize PROJECT_LIBS (-ldl used almost universally)
- originally (incorrectly) was a Field(0.0), which was generalized
to Field(Zero), but Field() is the correct form
STYLE: rename 'mustGet' to more standard 'mandatory' variable
- read header info once and reuse
- short-circuit logic to avoid unneeded checks
- additional debug information if field cannot be found
STYLE: remove unused old code remnants from #1206
Script to copy/create mingw run-time installation from the Linux
cross-compilation. Packs everything into a tar or a zip file.
To accommodate Windows, all .dll files are also placed in the
platforms bin/ directory where they are easily found via the PATH.
Futhermore, ThirdParty dll files (including those from mingw itself)
are also placed in the same directory.
---
Steps
- bundles common files and directories (bin, etc, META-INFO, ...)
- copies .exe files from FOAM_APPBIN and .dll files from FOAM_LIBBIN
to the new target platforms/win64MingwDPInt32Opt/bin.
- copies mingw sys-root .dll files to the new target
platforms/win64MingwDPInt32Opt/bin
- copies other ThirdParty dll files (scotch, fftw, etc) to
platforms/win64MingwDPInt32Opt/bin
- copies tutorials (can be deactivated)
---
Note
Can only be called when the linux64Mingw environment is active.
- makes it easier to use in combination with various 'New' selectors,
which mostly return an autoPtr.
ENH: add very simple FFT test
- basic sanity test that the library links properly
- previously hidden as Detail::[IO]FstreamAllocator, now exposed
directly as [io]fstreamPointer, which allows reuse for
std::ifstream, std::ofstream wrapping, without the additional
ISstream, OSstream layers.
These stream pointers have some characteristics similar to a
unique_ptr.
- restrict direct gzstream usage to two files (fstreamPointers.C,
gzstream.C) which improves localization and makes it simpler to
enable/disable with the `HAVE_LIBZ` define.
The HAVE_LIBZ define is currently simply hard-coded in the
Make/options.
If compiled WITHOUT libz support:
- reading gz files : FatalError
- writing gz files : emit warning and downgrade to uncompressed
- warn if compression is specified in the case controlDict
and downgrade to uncompressed
ENH: minor updates to gzstream interface for C++11
- support construct/open with std::string for the file names.
CONFIG: provisioning for have_libz detection as wmake/script
- the various information queries MUST be executed with
the '--no-print-directory' or risk polluting values
in the information queries.
This is mostly seen with the 'canCompile' test for tutorials running
in parallel.
Reduce the number of phaseSystems libraries:
- phaseSystems previously had a number of smaller libraries to provide
interface and model properties, etc. This potential flexibility was
never actually used anywhere, but causes cyclic dependencies between
phaseSystem and the models (and turbulence) that causes extreme
difficulty for mingw linking (issue #1238).
- libincompressibleMultiphaseSystems
- removed: libmassTransferModels
- libmultiphaseSystem
- removed: libcompressibleMultiphaseEulerianInterfacialModels
- libreactingMultiphaseSystem
- removed: libreactingPhaseSystem
- removed: libreactingEulerianFvPatchFields
- removed: libreactingEulerianInterfacialCompositionModels
- removed: libreactingEulerianInterfacialModels
- removed: libmultiphaseReactingTurbulenceModels
- libreactingTwoPhaseSystem
- removed: libreactingPhaseSystem
- removed: libreactingEulerianFvPatchFields
- removed: libreactingEulerianInterfacialCompositionModels
- removed: libreactingEulerianInterfacialModels
Avoid duplicate symbol for phaseCompressibleTurbulenceModels
Common turbulence models are defined in libreactingMultiphaseSystem,
and libmultiphaseReactingTurbulenceModels is now redundant.
The libtwoPhaseReactingTurbulenceModels extends the common models
for reactingTwoPhaseSystem.
- since the context (laminar/RAS/LES) is already given by the
sub-dictionary, it is redundant to use as prefix as well.
- silently support the longer names as compat methods
- old code just checked for pointer vs non-pointer.
Should actually treat CREF and REF types differently
Overseen in commit be058bec7d. Only affects develop branch
ENH: improved naming consistency in tmp, refPtr
- also use long-form to check for pointer type instead of the isTmp()
method. Makes differences between PTR, CREF, REF easier to spot.
STYLE: typeName() for tmp, refPtr is static
In fvSolution is possible to cache the limiter. This surface field
is stored in the database to be read later.
The internal tmp management of the field was not working properly.
In certain turbulence models such as kEpsilon, kOmegaSST, etc when used
in the multiphase context throw an error in the preconditioner. This
is due to alpha being zero. Fixes#1789.
- using HashPtrTable::set() with the same key twice did not guarantee
proper cleanup of memory since it simply used the underlying
HashTable::set() without doing anything about the old memory. Now
check for pre-existing storage and delete it when it does not
correspond to the newly stored pointer.
This problem is independent of potential memory slicing previously
flagged (#1286) and only partially resolved.
- naming similarity with autoPtr, unique_ptr and other containers.
For UPtrList derivatives, this is equivalent to the existing
operator(). The read-only variant is also equivalent to the
single-parameter 'set(label)' method.
With PtrList<T> list(...) :
const T* ptr = list.get(10);
if (ptr)
{
ptr->method();
}
vs.
if (list.set(10))
{
list[10].method();
}
For HashPtrTable there is only a read-only variant which is equivalent
to testing for existence and for value.
With HashPtrTable<T> hash(...) :
const T* ptr = list.get("key");
if (ptr)
{
ptr->method();
}
vs.
if (list.found("key"))
{
// Fails on null pointer!!
list["key"].method();
}
Use of get() is largely a matter of taste or local coding requirements
- forwarding like the emplace() method, but overwriting existing
entries as required
- propagate similar changes to HashPtrTable
For example, with HashPtrTable<labelList> table(...) :
With 'insert' semantics
table.emplace("list1", 1000);
vs
if (!table.found("list1"))
{
table.set("list1", new labelList(1000));
}
or
table.insert("list1", autoPtr<labelList>::New(1000));
Note that the last example invokes an unnecessary allocation/deletion
if the insertion is unsuccessful.
With 'set' semantics:
table.emplace_set("list1", 15);
vs
table.set("list1", new labelList(15));
- constructs such as the following will no longer worked, but that is
also a good thing.
ptrlist.set(i, scalarField(nFaces, Zero));
this called set(.., const tmp<scalarField>&), which meant under
the hood:
- create local temporary const scalarField&
- wrap as const tmp&
- use tmp::ptr(), to clone the const-ref
This implies an additional allocation (for the const scalarField&)
which is immediately discarded. Doubtful that compiler optimization
would do anything.
The fakeError function object emits FatalError at different stages (or
does nothing), which is useful for testing purposes (issue #1779).
Can request errors from constructor, execute and write methods.
- previously setting FOAM_ABORT would preempt checks for throwing
exceptions.
Now check for throwing first, to allow try/catch code to do its job.
However, ignore exception throwing for abort(). These are used
infrequently in the code, but indicate that recovery is deemed
impossible.
STYLE: use unique_ptr for internal stream buffer management
The function evaluate was returning true every outer loop, triggering
the re-calculation of ddt0 in every outer loop.
The evaluation of the term ddt0 should be performed once per time step.
The corrected function updates the timeIndex of ddt0 to avoid the
re-evaluation of this term in the outer loops.
- improves flexibility. Can tag a tmp as allowing non-const access to
the reference and skip additional const_cast in following code. For
example,
tmp<volScalarField> tfld(nullptr);
auto* ptr = getObjectPtr<volScalarField>("field");
if (ptr)
{
tfld.ref(*ptr);
}
else
{
tfld.reset(volScalarField::New(...));
}
auto& fld = tfld.ref();
ENH: renamed tmpNrc to refPtr
- the name 'refPtr' (reference|pointer) should be easier to remember
than tmpNrc (tmp, but non-ref-counted).
- provide tmpNrc typedef and header for code compatibility
NOTE
- in some places refPtr and tmp can be used instead of a
std::reference_wrapper for handling external references.
Unlike std::reference_wrapper, it can be default constructed
(holding nothing), whereas reference_wrapper may need a dummy
reference. However, the lifetime extension of references _may_ be
better with reference_wrapper.
- previously this was marked as '= delete' for consistency with
assignment from an empty pointer being a runtime error.
However, these can be considered semantically different and it makes
sense to permit this as equivalent to reset(nullptr).
This change does not break existing code since the operator was
previously unavailable (deleted).
STYLE: refactor tmp operator=(T*)
- delegate to reset() after initial checks
- Previously considered to be valid() if it was any reference
(null or non-null) or a non-null pointer.
This appears to be a holdover from old code (pre-2015) where
reinterpret_cast<..>(0) was used instead of the NullObject.
A reference via a null pointer isn't really possible anywhere. Even
for things like labelList::null(), they now use the NullObject,
which has a non-zero memory location.
- now simply check for a non-zero memory address. Regardless of
pointer or referenced object.
- combine reset() methods by adding a default parameter
- improve top-level visibility of empty/valid/get methods for symmetry
symmetry with autoPtr, future adjustment
- with '&&' conditions, often better to check for non-null autoPtr
first (it is cheap)
- check as bool instead of valid() method for cleaner code, especially
when the wrapped item itself has a valid/empty or good.
Also when handling multiple checks.
Now
if (ptr && ptr->valid())
if (ptr1 || ptr2)
instead
if (ptr.valid() && ptr->valid())
if (ptr1.valid() || ptr2.valid())
- This reflects the pre-existing coding situation where const_cast was
used throughout to effect the same.
STYLE: fix private/protected access
- CodedField, codedMixedFvPatchField
- libs() singleton method for global library handling
- explicit handling of empty filename for dlLibraryTable open/close.
Largely worked before, but now be more explicit about its behaviour.
- add (key, dict) constructor and open() methods.
More similarity to dimensionedType, Enum etc, and there is no
ambiguity with the templated open().
- construct or open from initializer_list of names
- optional verbosity when opening with auxiliary table,
avoid duplicate messages or spurious messages for these.
- basename and fullname methods (migrated from dynamicCode).
- centralise low-level load/unload hooks
- adjust close to also dlclose() aliased library names.
This is for a very specific use case where the faceZones are
imprinted after meshing the normal geometry. This sometimes
splits off badly connected bits of the mesh. One way to remove
these is to use e.g. subsetMesh. This embeds the
same functionality inside snappyHexMesh.
- replace `%namespace` directive with simpler `%static` directive.
We always encapsulate Lemon parser routines in an anonymous
namespace, so a simpler static linkage directive suffices.
This reduces the size of the Lemon patch (program and template).
- makes it easier to distinguish between pointers referring to pool
data versus pointers actually holding storage, avoids
manual demand-driven deletion and autoPtr.
ENH: simplify/improve Pstream profiling
- times now double (not scalar) for consistency with what cpuTime
delivers
- use bool to track suspend state
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
